/** @file
  Fault Tolerant Write protocol provides boot-time service for fault tolerant 
  write capability for block devices.  The protocol provides for non-volatile 
  storage of the intermediate data and private information a caller would need to 
  recover from a critical fault, such as a power failure.   

Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available under 
the terms and conditions of the BSD License that accompanies this distribution.  
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.                                            

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 

**/

#ifndef _FW_FAULT_TOLERANT_WRITE_PROTOCOL_H_
#define _FW_FAULT_TOLERANT_WRITE_PROTOCOL_H_

#define EFI_FAULT_TOLERANT_WRITE_PROTOCOL_GUID \
  { \
    0x3ebd9e82, 0x2c78, 0x4de6, {0x97, 0x86, 0x8d, 0x4b, 0xfc, 0xb7, 0xc8, 0x81 } \
  }

//
// Forward reference for pure ANSI compatability
//
typedef struct _EFI_FAULT_TOLERANT_WRITE_PROTOCOL  EFI_FAULT_TOLERANT_WRITE_PROTOCOL;

/**
  Get the size of the largest block that can be updated in a fault-tolerant manner.

  @param  This                 Indicates a pointer to the calling context.
  @param  BlockSize            A pointer to a caller-allocated UINTN that is
                               updated to indicate the size of the largest block
                               that can be updated.

  @retval EFI_SUCCESS          The function completed successfully.
  @retval EFI_ABORTED          The function could not complete successfully.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_GET_MAX_BLOCK_SIZE)(
  IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL    * This,
  OUT UINTN                               *BlockSize
  );

/**
  Allocates space for the protocol to maintain information about writes.
  Since writes must be completed in a fault-tolerant manner and multiple
  writes require more resources to be successful, this function
  enables the protocol to ensure that enough space exists to track
  information about upcoming writes.

  @param  This                 A pointer to the calling context.
  @param  CallerId             The GUID identifying the write.
  @param  PrivateDataSize      The size of the caller's private data  that must be
                               recorded for each write.
  @param  NumberOfWrites       The number of fault tolerant block writes that will
                               need to occur.

  @retval EFI_SUCCESS          The function completed successfully
  @retval EFI_ABORTED          The function could not complete successfully.
  @retval EFI_ACCESS_DENIED    Not all allocated writes have been completed.  All
                               writes must be completed or aborted before another
                               fault tolerant write can occur.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_ALLOCATE)(
  IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL    * This,
  IN EFI_GUID                             * CallerId,
  IN UINTN                                PrivateDataSize,
  IN UINTN                                NumberOfWrites
  );

/**
  Starts a target block update. This records information about the write
  in fault tolerant storage, and will complete the write in a recoverable
  manner, ensuring at all times that either the original contents or
  the modified contents are available.

  @param  This                 The calling context.
  @param  Lba                  The logical block address of the target block.
  @param  Offset               The offset within the target block to place the
                               data.
  @param  Length               The number of bytes to write to the target block.
  @param  PrivateData          A pointer to private data that the caller requires
                               to complete any pending writes in the event of a
                               fault.
  @param  FvBlockHandle        The handle of FVB protocol that provides services
                               for reading, writing, and erasing the target block.
  @param  Buffer               The data to write.

  @retval EFI_SUCCESS          The function completed successfully.
  @retval EFI_ABORTED          The function could not complete successfully.
  @retval EFI_BAD_BUFFER_SIZE  The write would span a block boundary, which is not
                               a valid action.
  @retval EFI_ACCESS_DENIED    No writes have been allocated.
  @retval EFI_NOT_READY        The last write has not been completed. Restart()
                               must be called to complete it.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_WRITE)(
  IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL     * This,
  IN EFI_LBA                               Lba,
  IN UINTN                                 Offset,
  IN UINTN                                 Length,
  IN VOID                                  *PrivateData,
  IN EFI_HANDLE                            FvbHandle,
  IN VOID                                  *Buffer
  );

/**
  Restarts a previously interrupted write. The caller must provide the
  block protocol needed to complete the interrupted write.

  @param  This                 The calling context.
  @param  FvBlockProtocol      The handle of FVB protocol that provides services.
                               for reading, writing, and erasing the target block.

  @retval EFI_SUCCESS          The function completed successfully.
  @retval EFI_ABORTED          The function could not complete successfully.
  @retval EFI_ACCESS_DENIED    No pending writes exist.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_RESTART)(
  IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL     * This,
  IN EFI_HANDLE                            FvbHandle
  );

/**
  Aborts all previously allocated writes.

  @param  This                 The calling context.

  @retval EFI_SUCCESS          The function completed successfully.
  @retval EFI_ABORTED          The function could not complete successfully.
  @retval EFI_NOT_FOUND        No allocated writes exist.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_ABORT)(
  IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL     * This
  );

/**
  Starts a target block update. This function records information about the write
  in fault-tolerant storage and completes the write in a recoverable
  manner, ensuring at all times that either the original contents or
  the modified contents are available.

  @param  This                 Indicates a pointer to the calling context.
  @param  CallerId             The GUID identifying the last write.
  @param  Lba                  The logical block address of the last write.
  @param  Offset               The offset within the block of the last write.
  @param  Length               The length of the last write.
  @param  PrivateDataSize      On input, the size of the PrivateData buffer. On
                               output, the size of the private data stored for
                               this write.
  @param  PrivateData          A pointer to a buffer. The function will copy
                               PrivateDataSize bytes from the private data stored
                               for this write.
  @param  Complete             A Boolean value with TRUE indicating that the write
                               was completed.

  @retval EFI_SUCCESS          The function completed successfully.
  @retval EFI_ABORTED          The function could not complete successfully.
  @retval EFI_NOT_FOUND        No allocated writes exist.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_FAULT_TOLERANT_WRITE_GET_LAST_WRITE)(
  IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL     * This,
  OUT EFI_GUID                             * CallerId,
  OUT EFI_LBA                              *Lba,
  OUT UINTN                                *Offset,
  OUT UINTN                                *Length,
  IN OUT UINTN                             *PrivateDataSize,
  OUT VOID                                 *PrivateData,
  OUT BOOLEAN                              *Complete
  );

//
// Protocol declaration
//
struct _EFI_FAULT_TOLERANT_WRITE_PROTOCOL {
  EFI_FAULT_TOLERANT_WRITE_GET_MAX_BLOCK_SIZE GetMaxBlockSize;
  EFI_FAULT_TOLERANT_WRITE_ALLOCATE           Allocate;
  EFI_FAULT_TOLERANT_WRITE_WRITE              Write;
  EFI_FAULT_TOLERANT_WRITE_RESTART            Restart;
  EFI_FAULT_TOLERANT_WRITE_ABORT              Abort;
  EFI_FAULT_TOLERANT_WRITE_GET_LAST_WRITE     GetLastWrite;
};

extern EFI_GUID gEfiFaultTolerantWriteProtocolGuid;

#endif