/*
 * (C) Copyright 2007-2008
 * Stelian Pop <stelian.pop@leadtechdesign.com>
 * Lead Tech Design <www.leadtechdesign.com>
 *
 * Configuation settings for the AT91CAP9ADK board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* ARM asynchronous clock */
#define AT91_CPU_NAME		"AT91CAP9"
#define AT91_MAIN_CLOCK		200000000	/* from 12 MHz crystal */
#define AT91_MASTER_CLOCK	100000000	/* peripheral = main / 2 */
#define CFG_HZ			1000000		/* 1us resolution */

#define AT91_SLOW_CLOCK		32768	/* slow clock */

#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
#define CONFIG_AT91CAP9		1	/* It's an Atmel AT91CAP9 SoC	*/
#define CONFIG_AT91CAP9ADK	1	/* on an AT91CAP9ADK Board	*/
#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/

#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG	1

#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SKIP_RELOCATE_UBOOT

/*
 * Hardware drivers
 */
#define CONFIG_ATMEL_USART	1
#undef CONFIG_USART0
#undef CONFIG_USART1
#undef CONFIG_USART2
#define CONFIG_USART3		1	/* USART 3 is DBGU */

/* LCD */
#define CONFIG_LCD			1
#define LCD_BPP				LCD_COLOR8
#define CONFIG_LCD_LOGO			1
#undef LCD_TEST_PATTERN
#define CONFIG_LCD_INFO			1
#define CONFIG_LCD_INFO_BELOW_LOGO	1
#define CFG_WHITE_ON_BLACK		1
#define CONFIG_ATMEL_LCD		1
#define CONFIG_ATMEL_LCD_BGR555		1
#define CFG_CONSOLE_IS_IN_ENV		1

#define CONFIG_BOOTDELAY	3

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE	1
#define CONFIG_BOOTP_BOOTPATH		1
#define CONFIG_BOOTP_GATEWAY		1
#define CONFIG_BOOTP_HOSTNAME		1

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_LOADS

#define CONFIG_CMD_PING		1
#define CONFIG_CMD_DHCP		1
#define CONFIG_CMD_NAND		1
#define CONFIG_CMD_USB		1

/* SDRAM: Careful: this supposes an AT91CAP-MEM33 expansion card */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			0x70000000
#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */

/* DataFlash */
#define CONFIG_HAS_DATAFLASH		1
#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
#define CFG_MAX_DATAFLASH_BANKS		1
#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
#define AT91_SPI_CLK			15000000
#define DATAFLASH_TCSS			(0x1a << 16)
#define DATAFLASH_TCHS			(0x1 << 24)

/* NOR flash */
#define CFG_FLASH_CFI			1
#define CONFIG_FLASH_CFI_DRIVER		1
#define PHYS_FLASH_1			0x10000000
#define CFG_FLASH_BASE			PHYS_FLASH_1
#define CFG_MAX_FLASH_SECT		256
#define CFG_MAX_FLASH_BANKS		1

/* NAND flash */
#define NAND_MAX_CHIPS			1
#define CFG_MAX_NAND_DEVICE		1
#define CFG_NAND_BASE			0x40000000
#define CFG_NAND_DBW_8			1

/* Ethernet */
#define CONFIG_MACB			1
#define CONFIG_RMII			1
#define CONFIG_NET_MULTI		1
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_RESET_PHY_R		1

/* USB */
#define CONFIG_USB_OHCI_NEW		1
#define LITTLEENDIAN			1
#define CONFIG_DOS_PARTITION		1
#define CFG_USB_OHCI_CPU_INIT		1
#define CFG_USB_OHCI_REGS_BASE		0x00700000	/* AT91_BASE_UHP */
#define CFG_USB_OHCI_SLOT_NAME		"at91cap9"
#define CFG_USB_OHCI_MAX_ROOT_PORTS	2

#define CFG_LOAD_ADDR			0x72000000	/* load address */

#define CFG_MEMTEST_START		PHYS_SDRAM
#define CFG_MEMTEST_END			0x73e00000

#define CFG_USE_DATAFLASH		1
#undef CFG_USE_NORFLASH

#ifdef CFG_USE_DATAFLASH

/* bootstrap + u-boot + env + linux in dataflash */
#define CFG_ENV_IS_IN_DATAFLASH	1
#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
#define CFG_ENV_OFFSET		0x4200
#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
#define CFG_ENV_SIZE		0x4200
#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x72000000 0x210000; bootm"
#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
				"root=/dev/mtdblock1 "			\
				"mtdparts=physmap-flash.0:-(nor);"	\
				"at91_nand:-(root) "			\
				"rw rootfstype=jffs2"

#else

/* bootstrap + u-boot + env + linux in norflash */
#define CFG_ENV_IS_IN_FLASH	1
#define CFG_MONITOR_BASE	(PHYS_FLASH_1 + 0x8000)
#define CFG_ENV_OFFSET		0x4000
#define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_ENV_OFFSET)
#define CFG_ENV_SIZE		0x4000
#define CONFIG_BOOTCOMMAND	"cp.b 0x10040000 0x72000000 0x200000; bootm"
#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
				"root=/dev/mtdblock4 "			\
				"mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
				"16k(env),224k(uboot)ro,-(linux);"	\
				"at91_nand:-(root) "			\
				"rw rootfstype=jffs2"

#endif

#define CONFIG_BAUDRATE		115200
#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }

#define CFG_PROMPT		"U-Boot> "
#define CFG_CBSIZE		256
#define CFG_MAXARGS		16
#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP		1
#define CONFIG_CMDLINE_EDITING	1

#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
/*
 * Size of malloc() pool
 */
#define CFG_MALLOC_LEN		ROUND(CFG_ENV_SIZE + 128*1024, 0x1000)
#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */

#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */

#ifdef CONFIG_USE_IRQ
#error CONFIG_USE_IRQ not supported
#endif

#endif