/* SPDX-License-Identifier: GPL-2.0+ */
/*
 *	Andesboot - Startup Code for Whitiger core
 *
 *	Copyright (C) 2006	Andes Technology Corporation
 *	Copyright (C) 2006	Shawn Lin <nobuhiro@andestech.com>
 *	Copyright (C) 2011	Macpaul Lin <macpaul@andestech.com>
 *				Greentime Hu <greentime@andestech.com>
 */

.pic

#include <asm-offsets.h>
#include <config.h>
#include <common.h>
#include <asm/macro.h>

/*
 * Jump vector table for EVIC mode
 */
#define ENA_DCAC		2UL
#define DIS_DCAC		~ENA_DCAC
#define ICAC_MEM_KBF_ISET	(0x07)	 	! I Cache sets per way
#define ICAC_MEM_KBF_IWAY	(0x07<<3)	! I cache ways
#define ICAC_MEM_KBF_ISZ	(0x07<<6)	! I cache line size
#define DCAC_MEM_KBF_DSET	(0x07)		! D Cache sets per way
#define DCAC_MEM_KBF_DWAY	(0x07<<3)	! D cache ways
#define DCAC_MEM_KBF_DSZ	(0x07<<6)	! D cache line size

#define PSW			$ir0
#define EIT_INTR_PSW		$ir1		! interruption $PSW
#define EIT_PREV_IPSW		$ir2		! previous $IPSW
#define EIT_IVB			$ir3		! intr vector base address
#define EIT_EVA			$ir4		! MMU related Exception VA reg
#define EIT_PREV_EVA		$ir5		! previous $eva
#define EIT_ITYPE		$ir6		! interruption type
#define EIT_PREV_ITYPE		$ir7		! prev intr type
#define EIT_MACH_ERR		$ir8		! machine error log
#define EIT_INTR_PC		$ir9		! Interruption PC
#define EIT_PREV_IPC		$ir10		! previous $IPC
#define EIT_OVL_INTR_PC		$ir11		! overflow interruption PC
#define EIT_PREV_P0		$ir12		! prev $P0
#define EIT_PREV_P1		$ir13		! prev $p1
#define CR_ICAC_MEM		$cr1		! I-cache/memory config reg
#define CR_DCAC_MEM		$cr2		! D-cache/memory config reg
#define MR_CAC_CTL		$mr8

.globl _start

_start:	j	reset
	j	tlb_fill
	j	tlb_not_present
	j	tlb_misc
	j	tlb_vlpt_miss
	j	machine_error
	j	debug
	j	general_exception
	j	syscall
	j	internal_interrupt		! H0I
	j	internal_interrupt		! H1I
	j	internal_interrupt		! H2I
	j	internal_interrupt		! H3I
	j	internal_interrupt		! H4I
	j	internal_interrupt		! H5I
	j	software_interrupt		! S0I

	.balign 16

/*
 * Andesboot Startup Code (reset vector)
 *
 *	1.	bootstrap
 *		1.1 reset - start of u-boot
 *		1.2 to superuser mode - as is when reset
 *		1.4 Do lowlevel_init
 *			- (this will jump out to lowlevel_init.S in SoC)
 *			- (lowlevel_init)
 *		1.3 Turn off watchdog timer
 *			- (this will jump out to watchdog.S in SoC)
 *			- (turnoff_watchdog)
 *	2.	Do critical init when reboot (not from mem)
 *	3.	Relocate andesboot to ram
 *	4.	Setup stack
 *	5.	Jump to second stage (board_init_r)
 */

/* Note: TEXT_BASE is defined by the (board-dependent) linker script */
.globl _TEXT_BASE
_TEXT_BASE:
	.word	CONFIG_SYS_TEXT_BASE

/* IRQ stack memory (calculated at run-time) + 8 bytes */
.globl IRQ_STACK_START_IN
IRQ_STACK_START_IN:
	.word 0x0badc0de

/*
 * The bootstrap code of nds32 core
 */

reset:

/*
 *  gp = ~0            for burn mode
 *     = ~load_address for load mode
 */
reset_gp:
	.relax_hint 0
	sethi   $gp, hi20(_GLOBAL_OFFSET_TABLE_-8)
	.relax_hint 0
	ori     $gp, $gp, lo12(_GLOBAL_OFFSET_TABLE_-4)
	add5.pc $gp

set_ivb:
	li	$r0, 0x0
	/* turn on BTB */
	mtsr	$r0, $misc_ctl
	/* set IVIC, vector size: 4 bytes, base: 0x0 */
	mtsr	$r0, $ivb
/*
 * MMU_CTL NTC0 Non-cacheable
 */
	li	$r0, ~0x6
	mfsr	$r1, $mr0
	and	$r1, $r1, $r0
	mtsr	$r1, $mr0

	li	$r0, ~0x3
	mfsr	$r1, $mr8
	and	$r1, $r1, $r0
	mtsr	$r1, $mr8
#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
/*
 * MMU_CTL NTC0 Cacheable/Write-Back
 */
	li	$r0, 0x4
	mfsr	$r1, $mr0
	or	$r1, $r1, $r0
	mtsr	$r1, $mr0
#endif

#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
#ifdef CONFIG_ARCH_MAP_SYSMEM
/*
 * MMU_CTL NTC1 Non-cacheable
 */
	li	$r0, ~0x18
	mfsr	$r1, $mr0
	and	$r1, $r1, $r0
	mtsr	$r1, $mr0
/*
 * MMU_CTL NTM1 mapping for partition 0
 */
	li	$r0, ~0x6000
	mfsr	$r1, $mr0
	and	$r1, $r1, $r0
	mtsr	$r1, $mr0
#endif
#endif

#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
	li	$r0, 0x1
	mfsr	$r1, $mr8
	or	$r1, $r1, $r0
	mtsr	$r1, $mr8
#endif

#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
	li	$r0, 0x2
	mfsr	$r1, $mr8
	or	$r1, $r1, $r0
	mtsr	$r1, $mr8
#endif

	jal mem_init

#ifndef CONFIG_SKIP_LOWLEVEL_INIT
	jal	lowlevel_init
/*
 *  gp = ~VMA          for burn mode
 *     = ~load_address for load mode
 */
update_gp:
	.relax_hint 0
	sethi   $gp, hi20(_GLOBAL_OFFSET_TABLE_-8)
	.relax_hint 0
	ori     $gp, $gp, lo12(_GLOBAL_OFFSET_TABLE_-4)
	add5.pc $gp
#endif
/*
 *  do critical initializations first (shall be in short time)
 *  do self_relocation ASAP.
 */

/*
 * Set the N1213 (Whitiger) core to superuser mode
 * According to spec, it is already when reset
 */
#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
	jal	turnoff_watchdog
#endif

/*
 * Set stackpointer in internal RAM to call board_init_f
 * $sp must be 8-byte alignment for ABI compliance.
 */
call_board_init_f:
	li		$sp, CONFIG_SYS_INIT_SP_ADDR
	move	$r0, $sp
	bal	board_init_f_alloc_reserve
	move	$sp, $r0
	bal	board_init_f_init_reserve
#ifdef CONFIG_DEBUG_UART
	bal	debug_uart_init
#endif
	li		$r0, 0x00000000
#ifdef __PIC__
#ifdef __NDS32_N1213_43U1H__
/* __NDS32_N1213_43U1H__ implies NDS32 V0 ISA */
	la	$r15, board_init_f	! store function address into $r15
#endif
#endif
	j	board_init_f		! jump to board_init_f() in lib/board.c

/*
 * void relocate_code(addr_sp, gd, addr_moni)
 *
 * This "function" does not return, instead it continues in RAM
 * after relocating the monitor code.
 *
 */

/*
 *  gp = ~RAM_SIZE - TEXT_SIZE for burn/load mode
 */

.globl	relocate_code
relocate_code:
	move	$r4, $r0		/* save addr_sp */
	move	$r5, $r1		/* save addr of gd */
	move	$r6, $r2		/* save addr of destination */

/* Set up the stack */
stack_setup:
	move	$sp, $r4

	la	$r0, _start@GOTOFF
	beq	$r0, $r6, clear_bss	/* skip relocation */

	la	 $r1, _end@GOTOFF
	move $r2, $r6			/* r2 <- scratch for copy_loop */
copy_loop:
	lmw.bim	$r11, [$r0], $r18
	smw.bim	$r11, [$r2], $r18
	blt	$r0, $r1, copy_loop
/*
 * fix relocations related issues
 */
fix_relocations:
	l.w	$r0, _TEXT_BASE@GOTOFF	/* r0 <- Text base */
	sub	$r9, $r6, $r0			/* r9 <- relocation offset */

	la  $r7, __rel_dyn_start@GOTOFF
	add	$r7, $r7, $r9		/* r2 <- rel __got_start in RAM */
	la  $r8, __rel_dyn_end@GOTOFF
	add	$r8, $r8, $r9		/* r2 <- rel __got_start in RAM */
	li  $r3, #0x2a /* R_NDS32_RELATIVE */
1:
	lmw.bim $r0, [$r7], $r2 /* r0,r1,r2 <- adr,type,addend */
	bne $r1, $r3, 2f

	add $r0, $r0, $r9
	add $r2, $r2, $r9
	sw  $r2, [$r0]
2:
	blt $r7, $r8, 1b

clear_bss:
	la	$r0, __bss_start@GOTOFF	/* r0 <- rel __bss_start in FLASH */
	add	$r0, $r0, $r9		/* r0 <- rel __bss_start in FLASH */
	la	$r1, __bss_end@GOTOFF		/* r1 <- rel __bss_end in RAM */
	add	$r1, $r1, $r9		/* r0 <- rel __bss_end in RAM */
	li	$r2, 0x00000000		/* clear */

clbss_l:
	sw	$r2, [$r0]		/* clear loop... */
	addi	$r0, $r0, #4
	bne	$r0, $r1, clbss_l

/*
 * We are done. Do not return, instead branch to second part of board
 * initialization, now running from RAM.
 */
call_board_init_r:
	bal invalidate_icache_all
	bal flush_dcache_all
	la	$r0, board_init_r@GOTOFF
	move	$lp, $r0		/* offset of board_init_r() */
	add	$lp, $lp, $r9		/* real address of board_init_r() */
	/* setup parameters for board_init_r */
	move	$r0, $r5		/* gd_t */
	move	$r1, $r6		/* dest_addr */

#ifdef __PIC__
#ifdef __NDS32_N1213_43U1H__		/* NDS32 V0 ISA	*/
	move	$r15, $lp		/* store function address into $r15 */
#endif
#endif

	/* jump to it ... */
	jr	$lp			/* jump to board_init_r() */

/*
 * Invalidate I$
 */
invalidate_icac:
	! read $cr1(I CAC/MEM cfg. reg.) configuration
	mfsr	$t0, CR_ICAC_MEM

	! Get the ISZ field
	andi	$p0, $t0, ICAC_MEM_KBF_ISZ

	! if $p0=0, then no I CAC existed
	beqz	$p0, end_flush_icache

	! get $p0 the index of I$ block
	srli	$p0, $p0, 6

	! $t1= bit width of I cache line size(ISZ)
	addi	$t1, $p0, 2

	li	$t4, 1
	sll	$t5, $t4, $t1			! get $t5 cache line size
	andi	$p1, $t0, ICAC_MEM_KBF_ISET	! get the ISET field
	addi	$t2, $p1, 6			! $t2= bit width of ISET
	andi	$p1, $t0, ICAC_MEM_KBF_IWAY	! get bitfield of Iway
	srli	$p1, $p1, 3
	addi	$p1, $p1, 1			! then $p1 is I way number
	add	$t3, $t2, $t1			! SHIFT
	sll	$p1, $p1, $t3			! GET the total cache size
ICAC_LOOP:
	sub	$p1, $p1, $t5
	cctl	$p1, L1I_IX_INVAL
	bnez	$p1, ICAC_LOOP
end_flush_icache:
	ret

/*
 * Invalidate D$
 */
invalidate_dcac:
	! read $cr2(D CAC/MEM cfg. reg.) configuration
	mfsr	$t0, CR_DCAC_MEM

	! Get the DSZ field
	andi	$p0, $t0, DCAC_MEM_KBF_DSZ

	! if $p0=0, then no D CAC existed
	beqz	$p0, end_flush_dcache

	! get $p0 the index of D$ block
	srli	$p0, $p0, 6

	! $t1= bit width of D cache line size(DSZ)
	addi	$t1, $p0, 2

	li	$t4, 1
	sll	$t5, $t4, $t1			! get $t5 cache line size
	andi	$p1, $t0, DCAC_MEM_KBF_DSET	! get the DSET field
	addi	$t2, $p1, 6			! $t2= bit width of DSET
	andi	$p1, $t0, DCAC_MEM_KBF_DWAY	! get bitfield of D way
	srli	$p1, $p1, 3
	addi	$p1, $p1, 1			! then $p1 is D way number
	add	$t3, $t2, $t1			! SHIFT
	sll	$p1, $p1, $t3			! GET the total cache size
DCAC_LOOP:
	sub	$p1, $p1, $t5
	cctl	$p1, L1D_IX_INVAL
	bnez	$p1, DCAC_LOOP
end_flush_dcache:
	ret

/*
 * Interrupt handling
 */

/*
 * exception handlers
 */
	.align	5

.macro	SAVE_ALL
	! FIXME: Other way to get PC?
	! FIXME: Update according to the newest spec!!
1:
	li	 $r28, 1
	push $r28
	mfsr $r28, PSW			! $PSW
	push $r28
	mfsr $r28, EIT_EVA		! $ir1 $EVA
	push $r28
	mfsr $r28, EIT_ITYPE		! $ir2 $ITYPE
	push $r28
	mfsr $r28, EIT_MACH_ERR		! $ir3 Mach Error
	push $r28
	mfsr $r28, EIT_INTR_PSW		! $ir5 $IPSW
	push $r28
	mfsr $r28, EIT_PREV_IPSW	! $ir6 prev $IPSW
	push $r28
	mfsr $r28, EIT_PREV_EVA		! $ir7 prev $EVA
	push $r28
	mfsr $r28, EIT_PREV_ITYPE	! $ir8 prev $ITYPE
	push $r28
	mfsr $r28, EIT_INTR_PC		! $ir9 Interruption PC
	push $r28
	mfsr $r28, EIT_PREV_IPC		! $ir10 prev INTR_PC
	push $r28
	mfsr $r28, EIT_OVL_INTR_PC	! $ir11 Overflowed INTR_PC
	push $r28
	mfusr $r28, $d1.lo
	push $r28
	mfusr $r28, $d1.hi
	push $r28
	mfusr $r28, $d0.lo
	push $r28
	mfusr $r28, $d0.hi
	push $r28
	pushm $r0, $r30		! store $sp-$r31, ra-$r30, $gp-$r29, $r28-$fp
	addi	$sp, $sp, -4	! make room for implicit pt_regs parameters
.endm

	.align	5
tlb_fill:
	SAVE_ALL
	move	$r0, $sp			! To get the kernel stack
	li	$r1, 1				! Determine interruption type
	bal 	do_interruption

	.align	5
tlb_not_present:
	SAVE_ALL
	move	$r0, $sp			! To get the kernel stack
	li	$r1, 2				! Determine interruption type
	bal 	do_interruption

	.align	5
tlb_misc:
	SAVE_ALL
	move	$r0, $sp			! To get the kernel stack
	li	$r1, 3				! Determine interruption type
	bal 	do_interruption

	.align	5
tlb_vlpt_miss:
	SAVE_ALL
	move	$r0, $sp			! To get the kernel stack
	li	$r1, 4				! Determine interruption type
	bal	do_interruption

	.align	5
machine_error:
	SAVE_ALL
	move	$r0, $sp			! To get the kernel stack
	li	$r1, 5				! Determine interruption type
	bal	do_interruption

	.align	5
debug:
	SAVE_ALL
	move	$r0, $sp			! To get the kernel stack
	li	$r1, 6				! Determine interruption type
	bal	do_interruption

	.align	5
general_exception:
	SAVE_ALL
	move	$r0, $sp			! To get the kernel stack
	li	$r1, 7				! Determine interruption type
	bal	do_interruption

	.align	5
syscall:
	SAVE_ALL
	move	$r0, $sp			! To get the kernel stack
	li	$r1, 8				! Determine interruption type
	bal	do_interruption

	.align	5
internal_interrupt:
	SAVE_ALL
	move	$r0, $sp			! To get the kernel stack
	li	$r1, 9				! Determine interruption type
	bal	do_interruption

	.align	5
software_interrupt:
	SAVE_ALL
	move	$r0, $sp			! To get the kernel stack
	li	$r1, 10				! Determine interruption type
	bal	do_interruption

	.align	5

/*
 * void reset_cpu(ulong addr);
 * $r0: input address to jump to
 */
.globl reset_cpu
reset_cpu:
/* No need to disable MMU because we never enable it */

	bal	invalidate_icac
	bal	invalidate_dcac
	mfsr	$p0, $MMU_CFG
	andi	$p0, $p0, 0x3			! MMPS
	li	$p1, 0x2			! TLB MMU
	bne	$p0, $p1, 1f
	tlbop	flushall			! Flush TLB
1:
	mfsr	$p0, MR_CAC_CTL			! Get the $CACHE_CTL reg
	li	$p1, DIS_DCAC
	and	$p0, $p0, $p1			! Clear the DC_EN bit
	mtsr	$p0, MR_CAC_CTL			! Write back the $CACHE_CTL reg
	br	$r0				! Jump to the input address