CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_MVEBU=y
CONFIG_SYS_TEXT_BASE=0x00800000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_CONTROLCENTERDC=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="armada-38x-controlcenterdc"
CONFIG_SPL_TEXT_BASE=0x40000030
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xd0012000
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
CONFIG_OF_BOARD_FIXUP=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="if env exists keyprogram; then; setenv keyprogram; run nfsboot; fi; run dobootfail"
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_I2C=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_GO is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TPM=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_EFI_PARTITION=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="ccdc.img"
CONFIG_ARP_TIMEOUT=200
CONFIG_NET_RETRY_COUNT=50
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_SCSI_AHCI=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_MV=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_BITBANGMII=y
CONFIG_BITBANGMII_MULTI=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_GIGE=y
CONFIG_MVNETA=y
CONFIG_MII=y
CONFIG_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCI_MVEBU=y
CONFIG_SCSI=y
CONFIG_SCSI_AHCI_PLAT=y
CONFIG_SYS_SCSI_MAX_SCSI_ID=2
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_KIRKWOOD_SPI=y
CONFIG_TPM_ATMEL_TWI=y
CONFIG_TPM_AUTH_SESSIONS=y
CONFIG_TPM_FLUSH_RESOURCES=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_TPM=y
# CONFIG_EFI_LOADER is not set