diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 594fc12..c603fe6 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -48,6 +48,11 @@
 endif
 obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o
 
+ifneq ($(filter y,$(CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR) $(CONFIG_SAVE_PREV_BL_FDT_ADDR)),)
+obj-y += save_prev_bl_data.o
+endif
+
+# obj-$(CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR) += save_prev_bl_data.o
 obj-y	+= bdinfo.o
 obj-y	+= sections.o
 CFLAGS_REMOVE_sections.o := $(LTO_CFLAGS)
diff --git a/arch/arm/lib/save_prev_bl_data.c b/arch/arm/lib/save_prev_bl_data.c
new file mode 100644
index 0000000..f4ee86a
--- /dev/null
+++ b/arch/arm/lib/save_prev_bl_data.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * save_prev_bl_data - saving previous bootloader data
+ * to environment variables.
+ *
+ * Copyright (c) 2022 Dzmitry Sankouski (dsankouski@gmail.com)
+ */
+#include <init.h>
+#include <env.h>
+#include <fdtdec.h>
+#include <fdt_support.h>
+#include <fdt.h>
+#include <common.h>
+#include <linux/errno.h>
+#include <asm/system.h>
+#include <asm/armv8/mmu.h>
+
+static ulong reg0 __section(".data");
+
+/**
+ * Save x0 register value, assuming previous bootloader set it to
+ * point on loaded fdt or (for older linux kernels)atags.
+ */
+void save_boot_params(ulong r0)
+{
+	reg0 = r0;
+	save_boot_params_ret();
+}
+
+bool is_addr_accessible(phys_addr_t addr)
+{
+	struct mm_region *mem = mem_map;
+	phys_addr_t bank_start;
+	phys_addr_t bank_end;
+
+	while (mem->size) {
+		bank_start = mem->phys;
+		bank_end = bank_start + mem->size;
+		debug("check if block %pap - %pap includes %pap\n", &bank_start, &bank_end, &addr);
+		if (addr > bank_start && addr < bank_end)
+			return true;
+		mem++;
+	}
+
+	return false;
+}
+
+int save_prev_bl_data(void)
+{
+	struct fdt_header *fdt_blob;
+	int node;
+	u64 initrd_start_prop;
+
+	if (!is_addr_accessible((phys_addr_t)reg0))
+		return -ENODATA;
+
+	fdt_blob = (struct fdt_header *)reg0;
+	if (!fdt_valid(&fdt_blob)) {
+		pr_warn("%s: address 0x%lx is not a valid fdt\n", __func__, reg0);
+		return -ENODATA;
+	}
+
+	if (CONFIG_IS_ENABLED(SAVE_PREV_BL_FDT_ADDR))
+		env_set_addr("prevbl_fdt_addr", (void *)reg0);
+	if (!CONFIG_IS_ENABLED(SAVE_PREV_BL_INITRAMFS_START_ADDR))
+		return 0;
+
+	node = fdt_path_offset(fdt_blob, "/chosen");
+	if (!node) {
+		pr_warn("%s: chosen node not found in device tree at addr: 0x%lx\n",
+					__func__, reg0);
+		return -ENODATA;
+	}
+	/*
+	 * linux,initrd-start property might be either 64 or 32 bit,
+	 * depending on primary bootloader implementation.
+	 */
+	initrd_start_prop = fdtdec_get_uint64(fdt_blob, node, "linux,initrd-start", 0);
+	if (!initrd_start_prop) {
+		debug("%s: attempt to get uint64 linux,initrd-start property failed, trying uint\n",
+				__func__);
+		initrd_start_prop = fdtdec_get_uint(fdt_blob, node, "linux,initrd-start", 0);
+		if (!initrd_start_prop) {
+			debug("%s: attempt to get uint failed, too\n", __func__);
+			return -ENODATA;
+		}
+	}
+	env_set_addr("prevbl_initrd_start_addr", (void *)initrd_start_prop);
+
+	return 0;
+}
diff --git a/boot/Kconfig b/boot/Kconfig
index 394b26f..ec5b956 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -1192,4 +1192,28 @@
 	help
 	  This option is used to set the default fdt file to boot OS.
 
+config SAVE_PREV_BL_FDT_ADDR
+	depends on ARM
+	bool "Saves fdt address, passed by the previous bootloader, to env var"
+	help
+	  When u-boot is used as a chain-loaded bootloader (replacing OS kernel),
+	  enable this option to save fdt address, passed by the
+	  previous bootloader for future use.
+	  Address is saved to `prevbl_fdt_addr` environment variable.
+
+	  If no fdt was provided by previous bootloader, no env variables
+	  will be created.
+
+config SAVE_PREV_BL_INITRAMFS_START_ADDR
+	depends on ARM
+	bool "Saves initramfs address, passed by the previous bootloader, to env var"
+	help
+	  When u-boot is used as a chain-loaded bootloader(replacing OS kernel),
+	  enable this option to save initramfs address, passed by the
+	  previous bootloader for future use.
+	  Address is saved to `prevbl_initrd_start_addr` environment variable.
+
+	  If no initramfs was provided by previous bootloader, no env variables
+	  will be created.
+
 endmenu		# Booting
diff --git a/common/board_r.c b/common/board_r.c
index b92c1bb..8dc87ed 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -445,6 +445,11 @@
 		env_set_hex("fdtcontroladdr",
 			    (unsigned long)map_to_sysmem(gd->fdt_blob));
 
+	#if (CONFIG_IS_ENABLED(SAVE_PREV_BL_INITRAMFS_START_ADDR) || \
+						CONFIG_IS_ENABLED(SAVE_PREV_BL_FDT_ADDR))
+		save_prev_bl_data();
+	#endif
+
 	/* Initialize from environment */
 	image_load_addr = env_get_ulong("loadaddr", 16, image_load_addr);
 
diff --git a/include/init.h b/include/init.h
index 7449650..7b8f62c 100644
--- a/include/init.h
+++ b/include/init.h
@@ -155,6 +155,19 @@
  */
 int setup_bdinfo(void);
 
+#if defined(CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR) || \
+defined(CONFIG_SAVE_PREV_BL_FDT_ADDR)
+/**
+ * save_prev_bl_data - Save prev bl data in env vars.
+ *
+ * When u-boot is chain-loaded, save previous bootloader data,
+ * like initramfs address to environment variables.
+ *
+ * Return: 0 if ok; -ENODATA on error
+ */
+int save_prev_bl_data(void);
+#endif
+
 /**
  * cpu_secondary_init_r() - CPU-specific secondary initialization
  *