CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-baltos"
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_BALTOS=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_DNS2=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(SPL),128k(SPL.backup1),128k(SPL.backup2),128k(SPL.backup3),1920k(u-boot),-(UBI)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_SYS_OMAP24_I2C_SPEED=1000
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_OMAP_HS_ADMA=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x00080000
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ATHEROS=y
CONFIG_PHY_SMSC=y
CONFIG_DM_ETH=y
CONFIG_DM_MDIO=y
CONFIG_MII=y
CONFIG_DRIVER_TI_CPSW=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB_MUSB_DSPS=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
CONFIG_USB_GADGET_VENDOR_NUM=0x0403
CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_FUNCTION_MASS_STORAGE=y
CONFIG_USB_ETHER=y
CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
CONFIG_WDT=y