// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * NXP ls1088a SOC common device tree source
 *
 * Copyright 2017, 2020-2021 NXP
 */

#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
	compatible = "fsl,ls1088a";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	memory@80000000 {
		device_type = "memory";
		reg = <0x00000000 0x80000000 0 0x80000000>;
		      /* DRAM space - 1, size : 2 GB DRAM */
	};

	gic: interrupt-controller@6000000 {
		compatible = "arm,gic-v3";
		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
		      <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
		#interrupt-cells = <3>;
		interrupt-controller;
		interrupts = <1 9 0x4>;
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
			     <1 11 0x8>, /* Virtual PPI, active-low */
			     <1 10 0x8>; /* Hypervisor PPI, active-low */
	};

	i2c0: i2c@2000000 {
		compatible = "fsl,vf610-i2c";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x0 0x2000000 0x0 0x10000>;
		interrupts = <0 34 4>;
	};

	i2c1: i2c@2010000 {
		compatible = "fsl,vf610-i2c";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x0 0x2010000 0x0 0x10000>;
		interrupts = <0 34 4>;
	};

	i2c2: i2c@2020000 {
		compatible = "fsl,vf610-i2c";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x0 0x2020000 0x0 0x10000>;
		interrupts = <0 35 4>;
	};

	i2c3: i2c@2030000 {
		compatible = "fsl,vf610-i2c";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x0 0x2030000 0x0 0x10000>;
		interrupts = <0 35 4>;
	};

	serial0: serial@21c0500 {
		device_type = "serial";
		compatible = "fsl,ns16550", "ns16550a";
		reg = <0x0 0x21c0500 0x0 0x100>;
		clock-frequency = <0>;	/* Updated by bootloader */
		interrupts = <0 32 0x1>; /* edge triggered */
	};

	serial1: serial@21c0600 {
		device_type = "serial";
		compatible = "fsl,ns16550", "ns16550a";
		reg = <0x0 0x21c0600 0x0 0x100>;
		clock-frequency = <0>; 	/* Updated by bootloader */
		interrupts = <0 32 0x1>; /* edge triggered */
	};

	dspi: dspi@2100000 {
		compatible = "fsl,vf610-dspi";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x0 0x2100000 0x0 0x10000>;
		interrupts = <0 26 0x4>; /* Level high type */
		num-cs = <6>;
	};

	qspi: quadspi@1550000 {
		compatible = "fsl,ls1088a-qspi";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x0 0x20c0000 0x0 0x10000>,
			<0x0 0x20000000 0x0 0x10000000>;
		reg-names = "QuadSPI", "QuadSPI-memory";
		num-cs = <4>;
	};

	esdhc: esdhc@2140000 {
		compatible = "fsl,esdhc";
		reg = <0x0 0x2140000 0x0 0x10000>;
		interrupts = <0 28 0x4>; /* Level high type */
		little-endian;
		bus-width = <4>;
	};

	gpio0: gpio@2300000 {
		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
		reg = <0x0 0x2300000 0x0 0x10000>;
		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
		little-endian;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
	};

	gpio1: gpio@2310000 {
		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
		reg = <0x0 0x2310000 0x0 0x10000>;
		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
		little-endian;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
	};

	gpio2: gpio@2320000 {
		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
		reg = <0x0 0x2320000 0x0 0x10000>;
		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
		little-endian;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
	};

	gpio3: gpio@2330000 {
		compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
		reg = <0x0 0x2330000 0x0 0x10000>;
		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
		little-endian;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
	};

	ifc: ifc@1530000 {
		compatible = "fsl,ifc", "simple-bus";
		reg = <0x0 0x2240000 0x0 0x20000>;
		interrupts = <0 21 0x4>; /* Level high type */
	};

	usb0: usb3@3100000 {
		compatible = "fsl,layerscape-dwc3";
		reg = <0x0 0x3100000 0x0 0x10000>;
		interrupts = <0 80 0x4>; /* Level high type */
		dr_mode = "host";
	};

	usb1: usb3@3110000 {
		compatible = "fsl,layerscape-dwc3";
		reg = <0x0 0x3110000 0x0 0x10000>;
		interrupts = <0 81 0x4>; /* Level high type */
		dr_mode = "host";
	};

	pcie1: pcie@3400000 {
		compatible = "fsl,ls-pcie", "snps,dw-pcie";
		reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
		       0x00 0x03480000 0x0 0x80000   /* lut registers */
		       0x00 0x034c0000 0x0 0x40000   /* pf controls registers */
		       0x20 0x00000000 0x0 0x20000>; /* configuration space */
		reg-names = "dbi", "lut", "ctrl", "config";
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		num-lanes = <4>;
		bus-range = <0x0 0xff>;
		ranges = <0x81000000 0x0 0x00000000 0x20 0x00020000 0x0 0x00010000   /* downstream I/O */
			  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
	};

	pcie2: pcie@3500000 {
		compatible = "fsl,ls-pcie", "snps,dw-pcie";
		reg = <0x00 0x03500000 0x0 0x80000   /* dbi registers */
		       0x00 0x03580000 0x0 0x80000   /* lut registers */
		       0x00 0x035c0000 0x0 0x40000   /* pf controls registers */
		       0x28 0x00000000 0x0 0x20000>; /* configuration space */
		reg-names = "dbi", "lut", "ctrl", "config";
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		num-lanes = <4>;
		bus-range = <0x0 0xff>;
		ranges = <0x81000000 0x0 0x00000000 0x28 0x00020000 0x0 0x00010000   /* downstream I/O */
			  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
	};

	pcie3: pcie@3600000 {
		compatible = "fsl,ls-pcie", "snps,dw-pcie";
		reg = <0x00 0x03600000 0x0 0x80000   /* dbi registers */
		       0x00 0x03680000 0x0 0x80000   /* lut registers */
		       0x00 0x036c0000 0x0 0x40000   /* pf controls registers */
		       0x30 0x00000000 0x0 0x20000>; /* configuration space */
		reg-names = "dbi", "lut", "ctrl", "config";
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		num-lanes = <8>;
		bus-range = <0x0 0xff>;
		ranges = <0x81000000 0x0 0x00000000 0x30 0x00020000 0x0 0x00010000   /* downstream I/O */
			  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
	};

	sata: sata@3200000 {
		compatible = "fsl,ls1088a-ahci";
		reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
		       0x7 0x100520  0x0 0x4>;	 /* ecc sata addr*/
		reg-names = "sata-base", "ecc-addr";
		interrupts = <0 133 4>;
		status = "disabled";
	};

	psci {
		compatible = "arm,psci-0.2";
		method = "smc";
	};

	fsl_mc: fsl-mc@80c000000 {
		compatible = "fsl,qoriq-mc", "simple-mfd";
		reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
		#address-cells = <3>;
		#size-cells = <1>;

		/*
		 * Region type 0x0 - MC portals
		 * Region type 0x1 - QBMAN portals
		 */
		ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
			  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;

		dpmacs {
			compatible = "simple-mfd";
			#address-cells = <1>;
			#size-cells = <0>;

			dpmac1: dpmac@1 {
				compatible = "fsl,qoriq-mc-dpmac";
				reg = <0x1>;
				status = "disabled";
			};

			dpmac2: dpmac@2 {
				compatible = "fsl,qoriq-mc-dpmac";
				reg = <0x2>;
				status = "disabled";
			};

			dpmac3: dpmac@3 {
				compatible = "fsl,qoriq-mc-dpmac";
				reg = <0x3>;
				status = "disabled";
			};

			dpmac4: dpmac@4 {
				compatible = "fsl,qoriq-mc-dpmac";
				reg = <0x4>;
				status = "disabled";
			};

			dpmac5: dpmac@5 {
				compatible = "fsl,qoriq-mc-dpmac";
				reg = <0x5>;
				status = "disabled";
			};

			dpmac6: dpmac@6 {
				compatible = "fsl,qoriq-mc-dpmac";
				reg = <0x6>;
				status = "disabled";
			};

			dpmac7: dpmac@7 {
				compatible = "fsl,qoriq-mc-dpmac";
				reg = <0x7>;
				status = "disabled";
			};

			dpmac8: dpmac@8 {
				compatible = "fsl,qoriq-mc-dpmac";
				reg = <0x8>;
				status = "disabled";
			};

			dpmac9: dpmac@9 {
				compatible = "fsl,qoriq-mc-dpmac";
				reg = <0x9>;
				status = "disabled";
			};

			dpmac10: dpmac@a {
				compatible = "fsl,qoriq-mc-dpmac";
				reg = <0xa>;
				status = "disabled";
			};
		};
	};

	emdio1: mdio@8B96000 {
		compatible = "fsl,ls-mdio";
		reg = <0x0 0x8B96000 0x0 0x1000>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	emdio2: mdio@8B97000 {
		compatible = "fsl,ls-mdio";
		reg = <0x0 0x8B97000 0x0 0x1000>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};
};