// SPDX-License-Identifier: GPL-2.0+
/*
 * SAMSUNG EXYNOS USB HOST EHCI Controller
 *
 * Copyright (C) 2012 Samsung Electronics Co.Ltd
 *	Vivek Gautam <gautam.vivek@samsung.com>
 */

#include <common.h>
#include <dm.h>
#include <fdtdec.h>
#include <log.h>
#include <linux/delay.h>
#include <linux/libfdt.h>
#include <malloc.h>
#include <usb.h>
#include <asm/arch/cpu.h>
#include <asm/arch/ehci.h>
#include <asm/arch/system.h>
#include <asm/arch/power.h>
#include <asm/gpio.h>
#include <linux/errno.h>
#include <linux/compat.h>
#include "ehci.h"

/* Declare global data pointer */
DECLARE_GLOBAL_DATA_PTR;

struct exynos_ehci_plat {
	struct usb_plat usb_plat;
	fdt_addr_t hcd_base;
	fdt_addr_t phy_base;
	struct gpio_desc vbus_gpio;
};

/**
 * Contains pointers to register base addresses
 * for the usb controller.
 */
struct exynos_ehci {
	struct ehci_ctrl ctrl;
	struct exynos_usb_phy *usb;
	struct ehci_hccr *hcd;
};

static int ehci_usb_of_to_plat(struct udevice *dev)
{
	struct exynos_ehci_plat *plat = dev_get_plat(dev);
	const void *blob = gd->fdt_blob;
	unsigned int node;
	int depth;

	/*
	 * Get the base address for XHCI controller from the device node
	 */
	plat->hcd_base = dev_read_addr(dev);
	if (plat->hcd_base == FDT_ADDR_T_NONE) {
		debug("Can't get the XHCI register base address\n");
		return -ENXIO;
	}

	depth = 0;
	node = fdtdec_next_compatible_subnode(blob, dev_of_offset(dev),
				COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
	if (node <= 0) {
		debug("XHCI: Can't get device node for usb3-phy controller\n");
		return -ENODEV;
	}

	/*
	 * Get the base address for usbphy from the device node
	 */
	plat->phy_base = fdtdec_get_addr(blob, node, "reg");
	if (plat->phy_base == FDT_ADDR_T_NONE) {
		debug("Can't get the usbphy register address\n");
		return -ENXIO;
	}

	/* Vbus gpio */
	gpio_request_by_name(dev, "samsung,vbus-gpio", 0,
			     &plat->vbus_gpio, GPIOD_IS_OUT);

	return 0;
}

static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb)
{
	u32 hsic_ctrl;

	clrbits_le32(&usb->usbphyctrl0,
			HOST_CTRL0_FSEL_MASK |
			HOST_CTRL0_COMMONON_N |
			/* HOST Phy setting */
			HOST_CTRL0_PHYSWRST |
			HOST_CTRL0_PHYSWRSTALL |
			HOST_CTRL0_SIDDQ |
			HOST_CTRL0_FORCESUSPEND |
			HOST_CTRL0_FORCESLEEP);

	setbits_le32(&usb->usbphyctrl0,
			/* Setting up the ref freq */
			(CLK_24MHZ << 16) |
			/* HOST Phy setting */
			HOST_CTRL0_LINKSWRST |
			HOST_CTRL0_UTMISWRST);
	udelay(10);
	clrbits_le32(&usb->usbphyctrl0,
			HOST_CTRL0_LINKSWRST |
			HOST_CTRL0_UTMISWRST);

	/* HSIC Phy Setting */
	hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
			HSIC_CTRL_FORCESLEEP |
			HSIC_CTRL_SIDDQ);

	clrbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
	clrbits_le32(&usb->hsicphyctrl2, hsic_ctrl);

	hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK)
				<< HSIC_CTRL_REFCLKDIV_SHIFT)
			| ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK)
				<< HSIC_CTRL_REFCLKSEL_SHIFT)
			| HSIC_CTRL_UTMISWRST);

	setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
	setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);

	udelay(10);

	clrbits_le32(&usb->hsicphyctrl1, HSIC_CTRL_PHYSWRST |
					HSIC_CTRL_UTMISWRST);

	clrbits_le32(&usb->hsicphyctrl2, HSIC_CTRL_PHYSWRST |
					HSIC_CTRL_UTMISWRST);

	udelay(20);

	/* EHCI Ctrl setting */
	setbits_le32(&usb->ehcictrl,
			EHCICTRL_ENAINCRXALIGN |
			EHCICTRL_ENAINCR4 |
			EHCICTRL_ENAINCR8 |
			EHCICTRL_ENAINCR16);
}

static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb)
{
	writel(CLK_24MHZ, &usb->usbphyclk);

	clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
		PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
		PHYPWR_NORMAL_MASK_PHY0));

	setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
	udelay(10);
	clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
}

static void setup_usb_phy(struct exynos_usb_phy *usb)
{
	set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);

	set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);

	if (cpu_is_exynos5())
		exynos5_setup_usb_phy(usb);
	else if (cpu_is_exynos4())
		if (proid_is_exynos4412())
			exynos4412_setup_usb_phy((struct exynos4412_usb_phy *)
						 usb);
}

static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb)
{
	u32 hsic_ctrl;

	/* HOST_PHY reset */
	setbits_le32(&usb->usbphyctrl0,
			HOST_CTRL0_PHYSWRST |
			HOST_CTRL0_PHYSWRSTALL |
			HOST_CTRL0_SIDDQ |
			HOST_CTRL0_FORCESUSPEND |
			HOST_CTRL0_FORCESLEEP);

	/* HSIC Phy reset */
	hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
			HSIC_CTRL_FORCESLEEP |
			HSIC_CTRL_SIDDQ |
			HSIC_CTRL_PHYSWRST);

	setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
	setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
}

static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb)
{
	setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
		PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
		PHYPWR_NORMAL_MASK_PHY0));
}

/* Reset the EHCI host controller. */
static void reset_usb_phy(struct exynos_usb_phy *usb)
{
	if (cpu_is_exynos5())
		exynos5_reset_usb_phy(usb);
	else if (cpu_is_exynos4())
		if (proid_is_exynos4412())
			exynos4412_reset_usb_phy((struct exynos4412_usb_phy *)
						 usb);

	set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
}

static int ehci_usb_probe(struct udevice *dev)
{
	struct exynos_ehci_plat *plat = dev_get_plat(dev);
	struct exynos_ehci *ctx = dev_get_priv(dev);
	struct ehci_hcor *hcor;

	ctx->hcd = (struct ehci_hccr *)plat->hcd_base;
	ctx->usb = (struct exynos_usb_phy *)plat->phy_base;

	/* setup the Vbus gpio here */
	if (dm_gpio_is_valid(&plat->vbus_gpio))
		dm_gpio_set_value(&plat->vbus_gpio, 1);

	setup_usb_phy(ctx->usb);
	hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd +
			HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase)));

	return ehci_register(dev, ctx->hcd, hcor, NULL, 0, USB_INIT_HOST);
}

static int ehci_usb_remove(struct udevice *dev)
{
	struct exynos_ehci *ctx = dev_get_priv(dev);
	int ret;

	ret = ehci_deregister(dev);
	if (ret)
		return ret;
	reset_usb_phy(ctx->usb);

	return 0;
}

static const struct udevice_id ehci_usb_ids[] = {
	{ .compatible = "samsung,exynos-ehci" },
	{ }
};

U_BOOT_DRIVER(usb_ehci) = {
	.name	= "ehci_exynos",
	.id	= UCLASS_USB,
	.of_match = ehci_usb_ids,
	.of_to_plat = ehci_usb_of_to_plat,
	.probe = ehci_usb_probe,
	.remove = ehci_usb_remove,
	.ops	= &ehci_usb_ops,
	.priv_auto	= sizeof(struct exynos_ehci),
	.plat_auto	= sizeof(struct exynos_ehci_plat),
	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
};