This document describes the instruction to build and flash ATF/OPTEE/U-Boot on
pico-imx7d board. U-Boot is loaded as part of FIP image by ATF in this setup.
The boot sequence is ATF -> OPTEE -> U-Boot -> Linux. U-Boot is in non-secure
world in this case.

- Build u-boot
    Set environment variable of CROSS_COMPILE for your toolchain
    $ make pico-imx7d_bl33_defconfig
    $ make all

- Download and build OPTEE
    $ git clone git@github.com:OP-TEE/optee_os.git
    $ make PLATFORM=imx PLATFORM_FLAVOR=mx7dpico_mbl CFG_BOOT_SECONDARY_REQUEST=y ARCH=arm

- Download and build ATF
    $ git clone https://git.linaro.org/landing-teams/working/mbl/arm-trusted-firmware.git -b linaro-imx7
    $ make DEBUG=1 PLAT=picopi ARCH=aarch32 ARM_ARCH_MAJOR=7 \
            CROSS_COMPILE=arm-linux-gnueabihf- LOG_LEVEL=50 V=1 \
            CRASH_REPORTING=1 AARCH32_SP=optee all
    Save file content in this link to file pico-imx7d.cfg:
      http://git.linaro.org/landing-teams/working/mbl/u-boot.git/tree/board/technexion/pico-imx7d/pico-imx7d.cfg?h=linaro-imx
    $ u-boot/tools/mkimage -n pico-imx7d.cfg -T imximage -e 0x9df00000 -d \
            build/picopi/debug/bl2.bin bl2.imx

- Create FIP image
    Create a  fiptool_images/ folder in ATF folder, copy u-boot.bin in u-boot
folder and tee*.bin in optee out/arm-plat-imx/core/tee/ folder to
fiptool_images. Run below command in ATF folder to generate FIP image.
    $ make -C tools/fiptool/
    $ tools/fiptool/fiptool create --tos-fw fiptool_images/tee-header_v2.bin \
          --tos-fw-extra1 fiptool_images/tee-pager_v2.bin \
          --tos-fw-extra2 fiptool_images/tee-pageable_v2.bin \
          --nt-fw fiptool_images/u-boot.bin \
          fip.bin

- Burn the images to eMMC for test.
    Run below command in atf folder:
    $ dd if=build/picopi/debug/bl2.bin.imx of=/dev/disk/by-id/usb-<your device>  bs=1024 seek=1;sync
    $ dd if=fip.bin of=/dev/disk/by-id/usb-<your device>  bs=1024 seek=1;sync

- Test
    Just boot up your board and wait for u-boot start up after ATF's log.
    For booting Linux in FIT image, please reference the FIT files in
    u-boot doc/uImage.FIT/ folder.