| # |
| # Device Tree Control |
| # |
| |
| config SUPPORT_OF_CONTROL |
| bool |
| |
| config PYLIBFDT |
| bool |
| |
| config DTOC |
| bool |
| select PYLIBFDT |
| |
| config BINMAN |
| bool |
| select DTOC |
| |
| menu "Device Tree Control" |
| depends on SUPPORT_OF_CONTROL |
| |
| config OF_CONTROL |
| bool "Run-time configuration via Device Tree" |
| select OF_LIBFDT if !OF_PLATDATA |
| select OF_REAL if !OF_PLATDATA |
| help |
| This feature provides for run-time configuration of U-Boot |
| via a flattened device tree. |
| |
| config OF_REAL |
| bool |
| help |
| Indicates that a real devicetree is available which can be accessed |
| at runtime. This means that dev_read_...() functions can be used to |
| read data from the devicetree for each device. This is true if |
| OF_CONTROL is enabled in U-Boot proper. |
| |
| config OF_BOARD_FIXUP |
| bool "Board-specific manipulation of Device Tree" |
| help |
| In certain circumstances it is necessary to be able to modify |
| U-Boot's device tree (e.g. to delete device from it). This option |
| make the Device Tree writeable and provides a board-specific |
| "board_fix_fdt" callback (called during pre-relocation time), which |
| enables the board initialization to modifiy the Device Tree. The |
| modified copy is subsequently used by U-Boot after relocation. |
| |
| config SPL_OF_CONTROL |
| bool "Enable run-time configuration via Device Tree in SPL" |
| depends on SPL && OF_CONTROL |
| select SPL_OF_LIBFDT if !SPL_OF_PLATDATA |
| select SPL_OF_REAL if !SPL_OF_PLATDATA |
| help |
| Some boards use device tree in U-Boot but only have 4KB of SRAM |
| which is not enough to support device tree. Disable this option to |
| allow such boards to be supported by U-Boot SPL. |
| |
| config TPL_OF_CONTROL |
| bool "Enable run-time configuration via Device Tree in TPL" |
| depends on TPL && OF_CONTROL |
| select TPL_OF_LIBFDT if !TPL_OF_PLATDATA |
| select TPL_OF_REAL if !TPL_OF_PLATDATA |
| help |
| Some boards use device tree in U-Boot but only have 4KB of SRAM |
| which is not enough to support device tree. Enable this option to |
| allow such boards to be supported by U-Boot TPL. |
| |
| config OF_LIVE |
| bool "Enable use of a live tree" |
| depends on DM && OF_CONTROL |
| help |
| Normally U-Boot uses a flat device tree which saves space and |
| avoids the need to unpack the tree before use. However a flat |
| tree does not support modification from within U-Boot since it |
| can invalidate driver-model device tree offsets. This option |
| enables a live tree which is available after relocation, |
| and can be adjusted as needed. |
| |
| choice |
| prompt "Provider of DTB for DT control" |
| depends on OF_CONTROL |
| |
| config OF_SEPARATE |
| bool "Separate DTB for DT control" |
| help |
| If this option is enabled, the device tree will be built and |
| placed as a separate u-boot.dtb file alongside the U-Boot image. |
| |
| config OF_EMBED |
| bool "Embedded DTB for DT control" |
| help |
| If this option is enabled, the device tree will be picked up and |
| built into the U-Boot image. This is suitable for local debugging |
| and development only and is not recommended for production devices. |
| Boards in the mainline U-Boot tree should not use it. |
| |
| endchoice |
| |
| config OF_BOARD |
| bool "Provided by the board (e.g a previous loader) at runtime" |
| default y if SANDBOX |
| help |
| If this option is enabled, the device tree will be provided by |
| the board at runtime if the board supports it. The device tree bundled |
| with the image (if any) will be overridden / ignored. |
| |
| A device tree file must be provided in the tree. |
| |
| config DEFAULT_DEVICE_TREE |
| string "Default Device Tree for DT control" |
| depends on OF_CONTROL |
| help |
| This option specifies the default Device Tree used for DT control. |
| It can be overridden from the command line: |
| $ make DEVICE_TREE=<device-tree-name> |
| |
| config OF_LIST |
| string "List of device tree files to include for DT control" |
| depends on SPL_LOAD_FIT || MULTI_DTB_FIT |
| default DEFAULT_DEVICE_TREE |
| help |
| This option specifies a list of device tree files to use for DT |
| control. These will be packaged into a FIT. At run-time, U-boot |
| or SPL will select the correct DT to use by examining the |
| hardware (e.g. reading a board ID value). This is a list of |
| device tree files (without the directory or .dtb suffix) |
| separated by <space>. |
| |
| config OF_OVERLAY_LIST |
| string "List of device tree overlays to include for DT control" |
| depends on SPL_LOAD_FIT_APPLY_OVERLAY |
| help |
| This option specifies a list of device tree overlays to use for DT |
| control. This option can then be used by a FIT generator to include |
| the overlays in the FIT image. |
| |
| choice |
| prompt "OF LIST compression" |
| depends on MULTI_DTB_FIT |
| default MULTI_DTB_FIT_NO_COMPRESSION |
| |
| config MULTI_DTB_FIT_LZO |
| bool "LZO" |
| depends on SYS_MALLOC_F |
| select LZO |
| help |
| Compress the FIT image containing the DTBs available for the SPL |
| using LZO compression. (requires lzop on host). |
| |
| config MULTI_DTB_FIT_GZIP |
| bool "GZIP" |
| depends on SYS_MALLOC_F |
| select GZIP |
| help |
| Compress the FIT image containing the DTBs available for the SPL |
| using GZIP compression. (requires gzip on host) |
| |
| config MULTI_DTB_FIT_NO_COMPRESSION |
| bool "No compression" |
| help |
| Do not compress the FIT image containing the DTBs available for the SPL. |
| Use this options only if LZO is not available and the DTBs are very small. |
| endchoice |
| |
| choice |
| prompt "Location of uncompressed DTBs" |
| depends on (MULTI_DTB_FIT_GZIP || MULTI_DTB_FIT_LZO) |
| default MULTI_DTB_FIT_DYN_ALLOC if SYS_MALLOC_F |
| |
| config MULTI_DTB_FIT_DYN_ALLOC |
| bool "Dynamically allocate the memory" |
| depends on SYS_MALLOC_F |
| |
| config MULTI_DTB_FIT_USER_DEFINED_AREA |
| bool "User-defined location" |
| endchoice |
| |
| config MULTI_DTB_FIT_UNCOMPRESS_SZ |
| hex "Size of memory reserved to uncompress the DTBs" |
| depends on (MULTI_DTB_FIT_GZIP || MULTI_DTB_FIT_LZO) |
| default 0x8000 |
| help |
| This is the size of this area where the DTBs are uncompressed. |
| If this area is dynamically allocated, make sure that |
| SYS_MALLOC_F_LEN is big enough to contain it. |
| |
| config MULTI_DTB_FIT_USER_DEF_ADDR |
| hex "Address of memory where dtbs are uncompressed" |
| depends on MULTI_DTB_FIT_USER_DEFINED_AREA |
| help |
| the FIT image containing the DTBs is uncompressed in an area defined |
| at compilation time. This is the address of this area. It must be |
| aligned on 2-byte boundary. |
| |
| config DTB_RESELECT |
| bool "Support swapping dtbs at a later point in boot" |
| depends on MULTI_DTB_FIT |
| help |
| It is possible during initial boot you may need to use a generic |
| dtb until you can fully determine the board your running on. This |
| config allows boards to implement a function at a later point |
| during boot to switch to the "correct" dtb. |
| |
| config MULTI_DTB_FIT |
| bool "Support embedding several DTBs in a FIT image for u-boot" |
| help |
| This option provides hooks to allow U-boot to parse an |
| appended FIT image and enable board specific code to then select |
| the correct DTB to be used. Use this if you need to support |
| multiple DTBs but don't use the SPL. |
| |
| |
| config SPL_MULTI_DTB_FIT |
| depends on SPL_LOAD_FIT && SPL_OF_REAL |
| bool "Support embedding several DTBs in a FIT image for the SPL" |
| help |
| This option provides the SPL with the ability to select its own |
| DTB at runtime from an appended FIT image containing several DTBs. |
| This allows using the same SPL binary on multiple platforms. |
| The primary purpose is to handle different versions of |
| the same platform without tweaking the platform code if the |
| differences can be expressed in the DTBs (common examples are: bus |
| capabilities, pad configurations). |
| |
| config SPL_OF_LIST |
| string "List of device tree files to include for DT control in SPL" |
| depends on SPL_MULTI_DTB_FIT |
| default OF_LIST |
| help |
| This option specifies a list of device tree files to use for DT |
| control in the SPL. These will be packaged into a FIT. At run-time, |
| the SPL will select the correct DT to use by examining the |
| hardware (e.g. reading a board ID value). This is a list of |
| device tree files (without the directory or .dtb suffix) |
| separated by <space>. |
| |
| choice |
| prompt "SPL OF LIST compression" |
| depends on SPL_MULTI_DTB_FIT |
| default SPL_MULTI_DTB_FIT_LZO |
| |
| config SPL_MULTI_DTB_FIT_LZO |
| bool "LZO" |
| depends on SYS_MALLOC_F |
| select SPL_LZO |
| help |
| Compress the FIT image containing the DTBs available for the SPL |
| using LZO compression. (requires lzop on host). |
| |
| config SPL_MULTI_DTB_FIT_GZIP |
| bool "GZIP" |
| depends on SYS_MALLOC_F |
| select SPL_GZIP |
| help |
| Compress the FIT image containing the DTBs available for the SPL |
| using GZIP compression. (requires gzip on host) |
| |
| config SPL_MULTI_DTB_FIT_NO_COMPRESSION |
| bool "No compression" |
| help |
| Do not compress the FIT image containing the DTBs available for the SPL. |
| Use this options only if LZO is not available and the DTBs are very small. |
| endchoice |
| |
| choice |
| prompt "Location of uncompressed DTBs" |
| depends on (SPL_MULTI_DTB_FIT_GZIP || SPL_MULTI_DTB_FIT_LZO) |
| default SPL_MULTI_DTB_FIT_DYN_ALLOC if SYS_MALLOC_F |
| |
| config SPL_MULTI_DTB_FIT_DYN_ALLOC |
| bool "Dynamically allocate the memory" |
| depends on SYS_MALLOC_F |
| |
| config SPL_MULTI_DTB_FIT_USER_DEFINED_AREA |
| bool "User-defined location" |
| endchoice |
| |
| config SPL_MULTI_DTB_FIT_UNCOMPRESS_SZ |
| hex "Size of memory reserved to uncompress the DTBs" |
| depends on (SPL_MULTI_DTB_FIT_GZIP || SPL_MULTI_DTB_FIT_LZO) |
| default 0x8000 |
| help |
| This is the size of this area where the DTBs are uncompressed. |
| If this area is dynamically allocated, make sure that |
| SPL_SYS_MALLOC_F_LEN is big enough to contain it. |
| |
| config SPL_MULTI_DTB_FIT_USER_DEF_ADDR |
| hex "Address of memory where dtbs are uncompressed" |
| depends on SPL_MULTI_DTB_FIT_USER_DEFINED_AREA |
| help |
| the FIT image containing the DTBs is uncompressed in an area defined |
| at compilation time. This is the address of this area. It must be |
| aligned on 2-byte boundary. |
| |
| config OF_SPL_REMOVE_PROPS |
| string "List of device tree properties to drop for SPL" |
| depends on SPL_OF_CONTROL |
| default "interrupt-parent interrupts" if SPL_PINCTRL && SPL_CLK |
| default "clocks clock-names interrupt-parent interrupts" if SPL_PINCTRL |
| default "pinctrl-0 pinctrl-names interrupt-parent interrupts" if SPL_CLK |
| default "pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupts" |
| help |
| Since SPL normally runs in a reduced memory space, the device tree |
| is cut down to only what is needed to load and start U-Boot. Only |
| nodes marked with the property "u-boot,dm-pre-reloc" will be |
| included. In addition, some properties are not used by U-Boot and |
| can be discarded. This option defines the list of properties to |
| discard. |
| |
| config OF_DTB_PROPS_REMOVE |
| bool "Enable removal of device tree properties" |
| depends on OF_CONTROL |
| help |
| Some boards have restricted amount of storage for U-Boot image. |
| If the generated binary doesn't fit into available image storage, |
| the built-in device tree could probably be cut down by removing |
| some not required device tree properties to reduce the image size. |
| Enable this option and define the properties to be removed in the |
| CONFIG_OF_REMOVE_PROPS list. Do not enable this option if you must |
| pass the built-in DTB directly to the kernel! |
| |
| config OF_REMOVE_PROPS |
| string "List of device tree properties to drop" |
| depends on OF_DTB_PROPS_REMOVE |
| default "interrupt-parent interrupts" if PINCTRL |
| help |
| Some properties are not used by U-Boot and can be discarded. |
| This option defines the list of properties to discard. |
| |
| config SPL_OF_PLATDATA |
| bool "Generate platform data for use in SPL" |
| depends on SPL_OF_CONTROL |
| select DTOC |
| select SPL_OF_PLATDATA_DRIVER_RT if !SPL_OF_PLATDATA_INST |
| help |
| For very constrained SPL environments the overhead of decoding |
| device tree nodes and converting their contents into platform data |
| is too large. This overhead includes libfdt code as well as the |
| device tree contents itself. The latter is fairly compact, but the |
| former can add 3KB or more to a Thumb 2 Image. |
| |
| This option enables generation of platform data from the device |
| tree as C code. This code creates devices using U_BOOT_DRVINFO() |
| declarations. The benefit is that it allows driver code to access |
| the platform data directly in C structures, avoidin the libfdt |
| overhead. |
| |
| This option works by generating C structure declarations for each |
| compatible string, then adding platform data and U_BOOT_DRVINFO |
| declarations for each node. See of-plat.txt for more information. |
| |
| config SPL_OF_REAL |
| bool |
| help |
| Indicates that a real devicetree is available which can be accessed |
| at runtime. This means that dev_read_...() functions can be used to |
| read data from the devicetree for each device. This is true if |
| SPL_OF_CONTROL is enabled and not SPL_OF_PLATDATA |
| |
| if SPL_OF_PLATDATA |
| |
| config SPL_OF_PLATDATA_PARENT |
| bool "Support parent information in devices" |
| default y |
| help |
| Generally it is useful to be able to access the parent of a device |
| with of-platdata. To save space this can be disabled, but in that |
| case dev_get_parent() will always return NULL; |
| |
| config SPL_OF_PLATDATA_INST |
| bool "Declare devices at build time" |
| help |
| Declare devices as udevice instances so that they do not need to be |
| bound when U-Boot starts. This can save time and code space. |
| |
| config SPL_OF_PLATDATA_NO_BIND |
| bool "Don't allow run-time binding of devices" |
| depends on SPL_OF_PLATDATA_INST |
| default y |
| help |
| This removes the ability to bind devices at run time, thus saving |
| some code space in U-Boot. This can be disabled if binding is needed, |
| at the code of some code size increase. |
| |
| config SPL_OF_PLATDATA_RT |
| bool "Use a separate struct for device runtime data" |
| depends on SPL_OF_PLATDATA_INST |
| default y |
| help |
| For systems running SPL from read-only memory it is convenient to |
| separate out the runtime information, so that the devices don't need |
| to be copied before being used. This moves the read-write parts of |
| struct udevice (at present just the flags) into a separate struct, |
| which is allocated at runtime. |
| |
| config SPL_OF_PLATDATA_DRIVER_RT |
| bool |
| help |
| Use a separate struct for driver runtime data. |
| |
| This enables the driver_rt information, used with of-platdata when |
| of-platdata-inst is not used. It allows finding devices by their |
| driver data. |
| |
| endif |
| |
| config TPL_OF_REAL |
| bool |
| help |
| Indicates that a real devicetree is available which can be accessed |
| at runtime. This means that dev_read_...() functions can be used to |
| read data from the devicetree for each device. This is true if |
| TPL_OF_CONTROL is enabled and not TPL_OF_PLATDATA |
| |
| config TPL_OF_PLATDATA |
| bool "Generate platform data for use in TPL" |
| depends on TPL_OF_CONTROL |
| select DTOC |
| select TPL_OF_PLATDATA_DRIVER_RT if !TPL_OF_PLATDATA_INST |
| help |
| For very constrained SPL environments the overhead of decoding |
| device tree nodes and converting their contents into platform data |
| is too large. This overhead includes libfdt code as well as the |
| device tree contents itself. The latter is fairly compact, but the |
| former can add 3KB or more to a Thumb 2 Image. |
| |
| This option enables generation of platform data from the device |
| tree as C code. This code creates devices using U_BOOT_DRVINFO() |
| declarations. The benefit is that it allows driver code to access |
| the platform data directly in C structures, avoidin the libfdt |
| overhead. |
| |
| This option works by generating C structure declarations for each |
| compatible string, then adding platform data and U_BOOT_DRVINFO |
| declarations for each node. See of-plat.txt for more information. |
| |
| if TPL_OF_PLATDATA |
| |
| config TPL_OF_PLATDATA_PARENT |
| bool "Support parent information in devices" |
| default y |
| help |
| Generally it is useful to be able to access the parent of a device |
| with of-platdata. To save space this can be disabled, but in that |
| case dev_get_parent() will always return NULL; |
| |
| config TPL_OF_PLATDATA_INST |
| bool "Declare devices at build time" |
| |
| help |
| Declare devices as udevice instances so that they do not need to be |
| bound when U-Boot starts. This can save time and code space. |
| |
| config TPL_OF_PLATDATA_NO_BIND |
| bool "Don't allow run-time binding of devices" |
| depends on TPL_OF_PLATDATA_INST |
| default y |
| help |
| This removes the ability to bind devices at run time, thus saving |
| some code space in U-Boot. This can be disabled if binding is needed, |
| at the code of some code size increase. |
| |
| config TPL_OF_PLATDATA_RT |
| bool "Use a separate struct for device runtime data" |
| depends on TPL_OF_PLATDATA_INST |
| default y |
| help |
| For systems running TPL from read-only memory it is convenient to |
| separate out the runtime information, so that the devices don't need |
| to be copied before being used. This moves the read-write parts of |
| struct udevice (at present just the flags) into a separate struct, |
| which is allocated at runtime. |
| |
| config TPL_OF_PLATDATA_DRIVER_RT |
| bool |
| help |
| Use a separate struct for driver runtime data. |
| |
| This enables the driver_rt information, used with of-platdata when |
| of-platdata-inst is not used. It allows finding devices by their |
| driver data. |
| |
| endif |
| |
| endmenu |