CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3368-px5-evb"
CONFIG_ROCKCHIP_RK3368=y
CONFIG_TPL_LDSCRIPT="arch/arm/mach-rockchip/u-boot-tpl-v8.lds"
CONFIG_TPL_LIBCOMMON_SUPPORT=y
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_TARGET_EVB_PX5=y
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xFF1c0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEBUG_UART=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_SPL_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_BOOTSTAGE_FDT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-px5-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_EARLY_INIT_R=y
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x400000
CONFIG_SPL_BSS_MAX_SIZE=0x20000
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x188000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_ATF=y
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_TPL=y
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
CONFIG_CMD_MMC=y
CONFIG_CMD_CACHE=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_TPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent"
CONFIG_TPL_OF_PLATDATA=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
# CONFIG_NET is not set
CONFIG_TPL_DM=y
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_TPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
CONFIG_TPL_SYSCON=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_TPL_CLK=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_TPL_RAM=y
CONFIG_DM_RESET=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_SYSRESET=y
CONFIG_PANIC_HANG=y
CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y