CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_MVEBU=y
CONFIG_SUPPORT_PASSING_ATAGS=y
CONFIG_CMDLINE_TAG=y
CONFIG_INITRD_TAG=y
CONFIG_STATIC_MACH_TYPE=y
CONFIG_MACH_TYPE=3036
CONFIG_SYS_TEXT_BASE=0x00800000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_DS414=y
CONFIG_DDR_32BIT=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x7E0000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-synology-ds414"
CONFIG_SPL_TEXT_BASE=0x40004030
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xd0012000
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS414r1 ihd_num=4 netif_num=2 flash_size=8 SataLedSpecial=1 HddHotplug=1"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="sf probe; sf read ${loadaddr} 0xd0000 0x2d0000; sf read ${ramdisk_addr_r} 0x3a0000 0x430000; bootm ${loadaddr} ${ramdisk_addr_r}"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_I2C=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_GIGE=y
CONFIG_MVNETA=y
CONFIG_MII=y
CONFIG_PCI=y
CONFIG_PCI_MVEBU=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_KIRKWOOD_SPI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_MVEBU is not set
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y