if ARCH_OMAP2PLUS

choice
	prompt "OMAP2+ platform select"
	default OMAP34XX

config OMAP34XX
	bool "OMAP34XX SoC"
	select ARM_CORTEX_A8_CVE_2017_5715
	select ARM_ERRATA_430973
	select ARM_ERRATA_454179
	select ARM_ERRATA_621766
	select ARM_ERRATA_725233
	select SPL_USE_TINY_PRINTF if SPL
	imply NAND_OMAP_GPMC
	imply SPL_FS_EXT4
	imply SPL_FS_FAT
	imply SPL_GPIO
	imply SPL_I2C
	imply SPL_LIBCOMMON_SUPPORT
	imply SPL_LIBDISK_SUPPORT
	imply SPL_LIBGENERIC_SUPPORT
	imply SPL_MMC
	imply SPL_NAND_SUPPORT
	imply SPL_OMAP3_ID_NAND
	imply SPL_POWER
	imply SPL_SERIAL
	imply SYS_I2C_OMAP24XX
	imply SYS_THUMB_BUILD
	imply TWL4030_POWER

config OMAP44XX
	bool "OMAP44XX SoC"
	select DM_EVENT
	select SPL_USE_TINY_PRINTF
	select SPL_SYS_NO_VECTOR_TABLE if SPL
	imply NAND_OMAP_ELM
	imply NAND_OMAP_GPMC
	imply SPL_DISPLAY_PRINT
	imply SPL_FS_EXT4
	imply SPL_FS_FAT
	imply SPL_GPIO
	imply SPL_I2C
	imply SPL_LIBCOMMON_SUPPORT
	imply SPL_LIBDISK_SUPPORT
	imply SPL_LIBGENERIC_SUPPORT
	imply SPL_MMC
	imply SPL_NAND_SIMPLE
	imply SPL_NAND_SUPPORT
	imply SPL_POWER
	imply SPL_SERIAL
	imply SYS_I2C_OMAP24XX
	imply SYS_THUMB_BUILD

config OMAP54XX
	bool "OMAP54XX SoC"
	select ARM_CORTEX_A15_CVE_2017_5715
	select ARM_ERRATA_798870
	select DM_EVENT
	select SYS_THUMB_BUILD
	imply NAND_OMAP_ELM
	imply NAND_OMAP_GPMC
	imply SPL_DISPLAY_PRINT
	imply SPL_ENV_SUPPORT
	imply SPL_FS_EXT4
	imply SPL_FS_FAT
	imply SPL_GPIO
	imply SPL_I2C
	imply SPL_LIBCOMMON_SUPPORT
	imply SPL_LIBDISK_SUPPORT
	imply SPL_LIBGENERIC_SUPPORT
	imply SPL_MMC
	imply SPL_NAND_AM33XX_BCH
	imply SPL_NAND_AM33XX_BCH
	imply SPL_NAND_SUPPORT
	imply SPL_POWER
	imply SPL_SERIAL
	imply SYS_I2C_OMAP24XX

config AM43XX
	bool "AM43XX SoC"
	select SPECIFY_CONSOLE_INDEX
	select SYS_L2_PL310 if !SYS_L2CACHE_OFF
	imply NAND_OMAP_ELM
	imply NAND_OMAP_GPMC
	imply SPL_DM
	imply SPL_DM_SEQ_ALIAS
	imply SPL_NAND_AM33XX_BCH
	imply SPL_NAND_SUPPORT
	imply SPL_OF_CONTROL
	imply SPL_OF_TRANSLATE
	imply SPL_SEPARATE_BSS
	imply SPL_SYS_MALLOC_SIMPLE
	imply SYS_I2C_OMAP24XX
	imply SYS_THUMB_BUILD
	help
	  Support for AM43xx SOC from Texas Instruments.
	  The AM43xx high performance SOC features a Cortex-A9
	  ARM core, a quad core PRU-ICSS for industrial Ethernet
	  protocols, dual camera support, optional 3D graphics
	  and an optional customer programmable secure boot.

config AM33XX
	bool "AM33XX SoC"
	select ARM_CORTEX_A8_CVE_2017_5715
	select DM_EVENT
	select SPECIFY_CONSOLE_INDEX
	imply NAND_OMAP_ELM
	imply NAND_OMAP_GPMC
	imply SKIP_LOWLEVEL_INIT
	imply SPL_NAND_AM33XX_BCH
	imply SPL_NAND_SUPPORT
	imply SYS_I2C_OMAP24XX
	imply SYS_THUMB_BUILD
	imply SPL_USE_TINY_PRINTF
	help
	  Support for AM335x SOC from Texas Instruments.
	  The AM335x high performance SOC features a Cortex-A8
	  ARM core, a dual core PRU-ICSS for industrial Ethernet
	  protocols, optional 3D graphics and an optional customer
	  programmable secure boot.

endchoice

config SYS_MPUCLK
	int "MPU CLK speed"
	depends on AM33XX
	default 500
	help
	  Defines the MPU clock speed (in MHz).

config SYS_OMAP_ABE_SYSCK
	bool

config TI_SECURE_EMIF_REGION_START
	hex "Reserved EMIF region start address"
	depends on TI_SECURE_DEVICE
	default 0x0
	help
	  Reserved EMIF region start address. Set to "0" to auto-select
	  to be at the end of the external memory region.

config TI_SECURE_EMIF_TOTAL_REGION_SIZE
	hex "Reserved EMIF region size"
	depends on TI_SECURE_DEVICE
	default 0x0
	help
	  Total reserved EMIF region size. Default is 0, which means no reserved EMIF
	  region on secure devices.

config TI_SECURE_EMIF_PROTECTED_REGION_SIZE
	hex "Size of protected region within reserved EMIF region"
	depends on TI_SECURE_DEVICE
	default 0x0
	help
	  This config option is used to specify the size of the portion of the total
	  reserved EMIF region set aside for secure OS needs that will  be protected
	  using hardware memory firewalls. This value must be smaller than the
	  TI_SECURE_EMIF_TOTAL_REGION_SIZE value.

config SYS_AUTOMATIC_SDRAM_DETECTION
	bool

choice
	depends on OMAP44XX || OMAP54XX
	prompt "Static or dynamic DDR timing calculations"
	default SYS_EMIF_PRECALCULATED_TIMING_REGS
	help
	  For the DDR timing information we can either dynamically determine
	  the timings to use or use pre-determined timings (based on using the
	  dynamic method).  Default to the static timing information.

config SYS_EMIF_PRECALCULATED_TIMING_REGS
	bool "Use precalcualted timing values"

config SYS_DEFAULT_LPDDR2_TIMINGS
	bool "Use default LPDDR2 timing values"
	select SYS_AUTOMATIC_SDRAM_DETECTION

endchoice

source "arch/arm/mach-omap2/omap3/Kconfig"

source "arch/arm/mach-omap2/omap4/Kconfig"

source "arch/arm/mach-omap2/omap5/Kconfig"

source "arch/arm/mach-omap2/am33xx/Kconfig"

source "board/BuR/brxre1/Kconfig"
source "board/BuR/brsmarc1/Kconfig"
source "board/BuR/brppt1/Kconfig"
source "board/siemens/draco/Kconfig"
source "board/siemens/pxm2/Kconfig"
source "board/siemens/rut/Kconfig"
source "board/ti/am43xx/Kconfig"
source "board/ti/am335x/Kconfig"
source "board/compulab/cm_t43/Kconfig"
source "board/phytec/phycore_am335x_r2/Kconfig"

endif