bootflow: Rename bootflow_flags_t

These flags actually relate to the iterator, not the bootflow struct
itself. Rename them.

Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/boot/bootdev-uclass.c b/boot/bootdev-uclass.c
index 8103a11..d34b7e3 100644
--- a/boot/bootdev-uclass.c
+++ b/boot/bootdev-uclass.c
@@ -629,11 +629,11 @@
 			if (++iter->cur_prio == BOOTDEVP_COUNT)
 				return log_msg_ret("fin", -ENODEV);
 
-			if (iter->flags & BOOTFLOWF_HUNT) {
+			if (iter->flags & BOOTFLOWIF_HUNT) {
 				/* hunt to find new bootdevs */
 				ret = bootdev_hunt_prio(iter->cur_prio,
 							iter->flags &
-							BOOTFLOWF_SHOW);
+							BOOTFLOWIF_SHOW);
 				log_debug("- hunt ret %d\n", ret);
 				if (ret)
 					return log_msg_ret("hun", ret);
@@ -657,7 +657,7 @@
 		       struct udevice **devp, int *method_flagsp)
 {
 	struct udevice *bootstd, *dev = NULL;
-	bool show = iter->flags & BOOTFLOWF_SHOW;
+	bool show = iter->flags & BOOTFLOWIF_SHOW;
 	int method_flags;
 	int ret;
 
@@ -668,7 +668,7 @@
 	}
 
 	/* hunt for any pre-scan devices */
-	if (iter->flags & BOOTFLOWF_HUNT) {
+	if (iter->flags & BOOTFLOWIF_HUNT) {
 		ret = bootdev_hunt_prio(BOOTDEVP_1_PRE_SCAN, show);
 		if (ret)
 			return log_msg_ret("pre", ret);
@@ -676,7 +676,7 @@
 
 	/* Handle scanning a single device */
 	if (IS_ENABLED(CONFIG_BOOTSTD_FULL) && label) {
-		if (iter->flags & BOOTFLOWF_HUNT) {
+		if (iter->flags & BOOTFLOWIF_HUNT) {
 			ret = bootdev_hunt(label, show);
 			if (ret)
 				return log_msg_ret("hun", ret);
@@ -687,11 +687,11 @@
 
 		log_debug("method_flags: %x\n", method_flags);
 		if (method_flags & BOOTFLOW_METHF_SINGLE_UCLASS)
-			iter->flags |= BOOTFLOWF_SINGLE_UCLASS;
+			iter->flags |= BOOTFLOWIF_SINGLE_UCLASS;
 		else if (method_flags & BOOTFLOW_METHF_SINGLE_DEV)
-			iter->flags |= BOOTFLOWF_SINGLE_DEV;
+			iter->flags |= BOOTFLOWIF_SINGLE_DEV;
 		else
-			iter->flags |= BOOTFLOWF_SINGLE_MEDIA;
+			iter->flags |= BOOTFLOWIF_SINGLE_MEDIA;
 		log_debug("Selected label: %s, flags %x\n", label, iter->flags);
 	} else {
 		bool ok;
diff --git a/boot/bootflow.c b/boot/bootflow.c
index 60791e6..70d5fc5 100644
--- a/boot/bootflow.c
+++ b/boot/bootflow.c
@@ -139,8 +139,8 @@
 		if (dev && iter->num_devs < iter->max_devs)
 			iter->dev_used[iter->num_devs++] = dev;
 
-		if ((iter->flags & (BOOTFLOWF_SHOW | BOOTFLOWF_SINGLE_DEV)) ==
-		    BOOTFLOWF_SHOW) {
+		if ((iter->flags & (BOOTFLOWIF_SHOW | BOOTFLOWIF_SINGLE_DEV)) ==
+		    BOOTFLOWIF_SHOW) {
 			if (dev)
 				printf("Scanning bootdev '%s':\n", dev->name);
 			else if (IS_ENABLED(CONFIG_BOOTMETH_GLOBAL) &&
@@ -215,7 +215,7 @@
 	iter->max_part = 0;
 
 	/* ...select next bootdev */
-	if (iter->flags & BOOTFLOWF_SINGLE_DEV) {
+	if (iter->flags & BOOTFLOWIF_SINGLE_DEV) {
 		ret = -ENOENT;
 	} else {
 		int method_flags;
@@ -227,7 +227,7 @@
 			ret = bootdev_setup_iter(iter, NULL, &dev,
 						 &method_flags);
 		} else if (IS_ENABLED(CONFIG_BOOTSTD_FULL) &&
-			   (iter->flags & BOOTFLOWF_SINGLE_UCLASS)) {
+			   (iter->flags & BOOTFLOWIF_SINGLE_UCLASS)) {
 			/* Move to the next bootdev in this uclass */
 			uclass_find_next_device(&dev);
 			if (!dev) {
@@ -236,7 +236,7 @@
 				ret = -ENODEV;
 			}
 		} else if (IS_ENABLED(CONFIG_BOOTSTD_FULL) &&
-			   iter->flags & BOOTFLOWF_SINGLE_MEDIA) {
+			   iter->flags & BOOTFLOWIF_SINGLE_MEDIA) {
 			log_debug("next in single\n");
 			method_flags = 0;
 			do {
@@ -328,7 +328,7 @@
 		 * For 'all' we return all bootflows, even
 		 * those with errors
 		 */
-		if (iter->flags & BOOTFLOWF_ALL)
+		if (iter->flags & BOOTFLOWIF_ALL)
 			return log_msg_ret("all", ret);
 	}
 	if (ret)
@@ -344,14 +344,14 @@
 	int ret;
 
 	if (dev || label)
-		flags |= BOOTFLOWF_SKIP_GLOBAL;
+		flags |= BOOTFLOWIF_SKIP_GLOBAL;
 	bootflow_iter_init(iter, flags);
 
 	/*
 	 * Set up the ordering of bootmeths. This sets iter->doing_global and
 	 * iter->first_glob_method if we are starting with the global bootmeths
 	 */
-	ret = bootmeth_setup_iter_order(iter, !(flags & BOOTFLOWF_SKIP_GLOBAL));
+	ret = bootmeth_setup_iter_order(iter, !(flags & BOOTFLOWIF_SKIP_GLOBAL));
 	if (ret)
 		return log_msg_ret("obmeth", -ENODEV);
 
@@ -373,7 +373,7 @@
 	if (ret) {
 		log_debug("check - ret=%d\n", ret);
 		if (ret != BF_NO_MORE_PARTS && ret != -ENOSYS) {
-			if (iter->flags & BOOTFLOWF_ALL)
+			if (iter->flags & BOOTFLOWIF_ALL)
 				return log_msg_ret("all", ret);
 		}
 		iter->err = ret;
@@ -402,7 +402,7 @@
 				return 0;
 			iter->err = ret;
 			if (ret != BF_NO_MORE_PARTS && ret != -ENOSYS) {
-				if (iter->flags & BOOTFLOWF_ALL)
+				if (iter->flags & BOOTFLOWIF_ALL)
 					return log_msg_ret("all", ret);
 			}
 		} else {
diff --git a/cmd/bootflow.c b/cmd/bootflow.c
index 3548bbb..42f6e14 100644
--- a/cmd/bootflow.c
+++ b/cmd/bootflow.c
@@ -135,13 +135,13 @@
 
 	flags = 0;
 	if (list)
-		flags |= BOOTFLOWF_SHOW;
+		flags |= BOOTFLOWIF_SHOW;
 	if (all)
-		flags |= BOOTFLOWF_ALL;
+		flags |= BOOTFLOWIF_ALL;
 	if (no_global)
-		flags |= BOOTFLOWF_SKIP_GLOBAL;
+		flags |= BOOTFLOWIF_SKIP_GLOBAL;
 	if (!no_hunter)
-		flags |= BOOTFLOWF_HUNT;
+		flags |= BOOTFLOWIF_HUNT;
 
 	/*
 	 * If we have a device, just scan for bootflows attached to that device
diff --git a/doc/develop/bootstd.rst b/doc/develop/bootstd.rst
index dabe987..5dfa6cf 100644
--- a/doc/develop/bootstd.rst
+++ b/doc/develop/bootstd.rst
@@ -489,22 +489,22 @@
 Then the iterator is set up to according to the parameters given:
 
 - When `dev` is provided, then a single bootdev is scanned. In this case,
-  `BOOTFLOWF_SKIP_GLOBAL` and `BOOTFLOWF_SINGLE_DEV` are set. No hunters are
+  `BOOTFLOWIF_SKIP_GLOBAL` and `BOOTFLOWIF_SINGLE_DEV` are set. No hunters are
   used in this case
 
 - Otherwise, when `label` is provided, then a single label or named bootdev is
-  scanned. In this case `BOOTFLOWF_SKIP_GLOBAL` is set and there are three
+  scanned. In this case `BOOTFLOWIF_SKIP_GLOBAL` is set and there are three
   options (with an effect on the `iter_incr()` function described later):
 
   - If `label` indicates a numeric bootdev number (e.g. "2") then
     `BOOTFLOW_METHF_SINGLE_DEV` is set. In this case, moving to the next bootdev
     simple stops, since there is only one. No hunters are used.
   - If `label` indicates a particular media device (e.g. "mmc1") then
-    `BOOTFLOWF_SINGLE_MEDIA` is set. In this case, moving to the next bootdev
+    `BOOTFLOWIF_SINGLE_MEDIA` is set. In this case, moving to the next bootdev
     processes just the children of the media device. Hunters are used, in this
     example just the "mmc" hunter.
   - If `label` indicates a media uclass (e.g. "mmc") then
-    `BOOTFLOWF_SINGLE_UCLASS` is set. In this case, all bootdevs in that uclass
+    `BOOTFLOWIF_SINGLE_UCLASS` is set. In this case, all bootdevs in that uclass
     are used. Hunters are used, in this example just the "mmc" hunter
 
 - Otherwise, none of the above flags is set and iteration is set up to work
@@ -543,7 +543,7 @@
 With the iterator ready, `bootflow_scan_first()` checks whether the current
 settings produce a valid bootflow. This is handled by `bootflow_check()`, which
 either returns 0 (if it got something) or an error if not (more on that later).
-If the `BOOTFLOWF_ALL` iterator flag is set, even errors are returned as
+If the `BOOTFLOWIF_ALL` iterator flag is set, even errors are returned as
 incomplete bootflows, but normally an error results in moving onto the next
 iteration.
 
@@ -651,7 +651,7 @@
 Based on what the bootdev or bootmeth responds with, `bootflow_check()` either
 returns a valid bootflow, or a partial one with an error. A partial bootflow
 is one that has some fields set up, but did not reach the `BOOTFLOWST_READY`
-state. As noted before, if the `BOOTFLOWF_ALL` iterator flag is set, then all
+state. As noted before, if the `BOOTFLOWIF_ALL` iterator flag is set, then all
 bootflows are returned, even partial ones. This can help with debugging.
 
 So at this point you can see that total control over whether a bootflow can
diff --git a/include/bootflow.h b/include/bootflow.h
index f516bf8..e5fdf5f 100644
--- a/include/bootflow.h
+++ b/include/bootflow.h
@@ -93,36 +93,36 @@
 };
 
 /**
- * enum bootflow_flags_t - flags for the bootflow iterator
+ * enum bootflow_iter_flags_t - flags for the bootflow iterator
  *
- * @BOOTFLOWF_FIXED: Only used fixed/internal media
- * @BOOTFLOWF_SHOW: Show each bootdev before scanning it; show each hunter
+ * @BOOTFLOWIF_FIXED: Only used fixed/internal media
+ * @BOOTFLOWIF_SHOW: Show each bootdev before scanning it; show each hunter
  * before using it
- * @BOOTFLOWF_ALL: Return bootflows with errors as well
- * @BOOTFLOWF_HUNT: Hunt for new bootdevs using the bootdrv hunters
+ * @BOOTFLOWIF_ALL: Return bootflows with errors as well
+ * @BOOTFLOWIF_HUNT: Hunt for new bootdevs using the bootdrv hunters
  *
  * Internal flags:
- * @BOOTFLOWF_SINGLE_DEV: (internal) Just scan one bootdev
- * @BOOTFLOWF_SKIP_GLOBAL: (internal) Don't scan global bootmeths
- * @BOOTFLOWF_SINGLE_UCLASS: (internal) Keep scanning through all devices in
+ * @BOOTFLOWIF_SINGLE_DEV: (internal) Just scan one bootdev
+ * @BOOTFLOWIF_SKIP_GLOBAL: (internal) Don't scan global bootmeths
+ * @BOOTFLOWIF_SINGLE_UCLASS: (internal) Keep scanning through all devices in
  * this uclass (used with things like "mmc")
- * @BOOTFLOWF_SINGLE_MEDIA: (internal) Scan one media device in the uclass (used
+ * @BOOTFLOWIF_SINGLE_MEDIA: (internal) Scan one media device in the uclass (used
  * with things like "mmc1")
  */
-enum bootflow_flags_t {
-	BOOTFLOWF_FIXED		= 1 << 0,
-	BOOTFLOWF_SHOW		= 1 << 1,
-	BOOTFLOWF_ALL		= 1 << 2,
-	BOOTFLOWF_HUNT		= 1 << 3,
+enum bootflow_iter_flags_t {
+	BOOTFLOWIF_FIXED		= 1 << 0,
+	BOOTFLOWIF_SHOW			= 1 << 1,
+	BOOTFLOWIF_ALL			= 1 << 2,
+	BOOTFLOWIF_HUNT			= 1 << 3,
 
 	/*
 	 * flags used internally by standard boot - do not set these when
 	 * calling bootflow_scan_bootdev() etc.
 	 */
-	BOOTFLOWF_SINGLE_DEV	= 1 << 16,
-	BOOTFLOWF_SKIP_GLOBAL	= 1 << 17,
-	BOOTFLOWF_SINGLE_UCLASS	= 1 << 18,
-	BOOTFLOWF_SINGLE_MEDIA	= 1 << 19,
+	BOOTFLOWIF_SINGLE_DEV		= 1 << 16,
+	BOOTFLOWIF_SKIP_GLOBAL		= 1 << 17,
+	BOOTFLOWIF_SINGLE_UCLASS	= 1 << 18,
+	BOOTFLOWIF_SINGLE_MEDIA		= 1 << 19,
 };
 
 /**
@@ -164,9 +164,9 @@
  * updated to a larger value, no less than the number of available partitions.
  * This ensures that iteration works through all partitions on the bootdev.
  *
- * @flags: Flags to use (see enum bootflow_flags_t). If BOOTFLOWF_GLOBAL_FIRST is
- *	enabled then the global bootmeths are being scanned, otherwise we have
- *	moved onto the bootdevs
+ * @flags: Flags to use (see enum bootflow_iter_flags_t). If
+ *	BOOTFLOWIF_GLOBAL_FIRST is enabled then the global bootmeths are being
+ *	scanned, otherwise we have moved onto the bootdevs
  * @dev: Current bootdev, NULL if none. This is only ever updated in
  * bootflow_iter_set_dev()
  * @part: Current partition number (0 for whole device)
@@ -233,7 +233,7 @@
  * This sets everything to the starting point, ready for use.
  *
  * @iter: Place to store private info (inited by this call)
- * @flags: Flags to use (see enum bootflow_flags_t)
+ * @flags: Flags to use (see enum bootflow_iter_flags_t)
  */
 void bootflow_iter_init(struct bootflow_iter *iter, int flags);
 
@@ -259,15 +259,16 @@
 /**
  * bootflow_scan_first() - find the first bootflow for a device or label
  *
- * If @flags includes BOOTFLOWF_ALL then bootflows with errors are returned too
+ * If @flags includes BOOTFLOWIF_ALL then bootflows with errors are returned too
  *
  * @dev:	Boot device to scan, NULL to work through all of them until it
  *	finds one that can supply a bootflow
  * @label:	Label to control the scan, NULL to work through all devices
  *	until it finds one that can supply a bootflow
  * @iter:	Place to store private info (inited by this call)
- * @flags:	Flags for iterator (enum bootflow_flags_t). Note that if @dev
- * is NULL, then BOOTFLOWF_SKIP_GLOBAL is set automatically by this function
+ * @flags:	Flags for iterator (enum bootflow_iter_flags_t). Note that if
+ *	@dev is NULL, then BOOTFLOWIF_SKIP_GLOBAL is set automatically by this
+ *	function
  * @bflow:	Place to put the bootflow if found
  * Return: 0 if found,  -ENODEV if no device, other -ve on other error
  *	(iteration can continue)
diff --git a/test/boot/bootdev.c b/test/boot/bootdev.c
index e1eb8cc..4fe9fd7 100644
--- a/test/boot/bootdev.c
+++ b/test/boot/bootdev.c
@@ -289,7 +289,7 @@
 
 	/* try again but enable hunting, which brings in SCSI */
 	bootflow_iter_uninit(&iter);
-	ut_assertok(bootflow_scan_first(NULL, NULL, &iter, BOOTFLOWF_HUNT,
+	ut_assertok(bootflow_scan_first(NULL, NULL, &iter, BOOTFLOWIF_HUNT,
 					&bflow));
 	ut_asserteq(-ENODEV, bootflow_scan_next(&iter, &bflow));
 	ut_asserteq(7, iter.num_devs);
@@ -427,8 +427,8 @@
 
 	ut_assertok(bootstd_test_drop_bootdev_order(uts));
 	ut_assertok(bootflow_scan_first(NULL, NULL, &iter,
-					BOOTFLOWF_SHOW | BOOTFLOWF_HUNT |
-					BOOTFLOWF_SKIP_GLOBAL, &bflow));
+					BOOTFLOWIF_SHOW | BOOTFLOWIF_HUNT |
+					BOOTFLOWIF_SKIP_GLOBAL, &bflow));
 	ut_asserteq(BIT(MMC_HUNTER) | BIT(1), std->hunters_used);
 
 	return 0;
@@ -649,7 +649,7 @@
 	iter.part = 0;
 	uclass_first_device(UCLASS_BOOTMETH, &bflow.method);
 	iter.cur_prio = 0;
-	iter.flags = BOOTFLOWF_SHOW;
+	iter.flags = BOOTFLOWIF_SHOW;
 
 	dev = NULL;
 	console_record_reset_enable();
@@ -662,7 +662,7 @@
 	ut_assert_console_end();
 
 	/* now try again with hunting enabled */
-	iter.flags = BOOTFLOWF_SHOW | BOOTFLOWF_HUNT;
+	iter.flags = BOOTFLOWIF_SHOW | BOOTFLOWIF_HUNT;
 	iter.cur_prio = 0;
 	iter.part = 0;
 
diff --git a/test/boot/bootflow.c b/test/boot/bootflow.c
index b9284fc..fd0e1d6 100644
--- a/test/boot/bootflow.c
+++ b/test/boot/bootflow.c
@@ -277,7 +277,7 @@
 	/* The first device is mmc2.bootdev which has no media */
 	ut_asserteq(-EPROTONOSUPPORT,
 		    bootflow_scan_first(NULL, NULL, &iter,
-					BOOTFLOWF_ALL | BOOTFLOWF_SKIP_GLOBAL, &bflow));
+					BOOTFLOWIF_ALL | BOOTFLOWIF_SKIP_GLOBAL, &bflow));
 	ut_asserteq(2, iter.num_methods);
 	ut_asserteq(0, iter.cur_method);
 	ut_asserteq(0, iter.part);