diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 79e9704..daafc8d 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -12,6 +12,7 @@
 obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o save_boot_param.o
 
 obj-tpl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-tpl.o
+obj-tpl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-tpl.o
 obj-tpl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-tpl.o
 
 obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c
index 23af653..5239cbc 100644
--- a/arch/arm/mach-rockchip/rk3288-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3288-board-spl.c
@@ -204,12 +204,15 @@
 	}
 #endif
 
+#if !defined(CONFIG_SUPPORT_TPL)
 	debug("\nspl:init dram\n");
 	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
 	if (ret) {
 		debug("DRAM init failed: %d\n", ret);
 		return;
 	}
+#endif
+
 #if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT)
 	back_to_bootrom();
 #endif
diff --git a/arch/arm/mach-rockchip/rk3288-board-tpl.c b/arch/arm/mach-rockchip/rk3288-board-tpl.c
new file mode 100644
index 0000000..3d08b5b
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3288-board-tpl.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2017 Amarula Solutions
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <ram.h>
+#include <spl.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/arch/bootrom.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/grf_rk3288.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pmu_rk3288.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/timer.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GRF_BASE		0xff770000
+void board_init_f(ulong dummy)
+{
+	struct udevice *dev;
+	int ret;
+
+	/* Example code showing how to enable the debug UART on RK3288 */
+	/* Enable early UART on the RK3288 */
+	struct rk3288_grf * const grf = (void *)GRF_BASE;
+
+	rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT |
+		     GPIO7C6_MASK << GPIO7C6_SHIFT,
+		     GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT |
+		     GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT);
+	/*
+	 * Debug UART can be used from here if required:
+	 *
+	 * debug_uart_init();
+	 * printch('a');
+	 * printhex8(0x1234);
+	 * printascii("string");
+	 */
+	debug_uart_init();
+
+	ret = spl_early_init();
+	if (ret) {
+		debug("spl_early_init() failed: %d\n", ret);
+		hang();
+	}
+
+	rockchip_timer_init();
+	configure_l2ctlr();
+
+	ret = rockchip_get_clk(&dev);
+	if (ret) {
+		debug("CLK init failed: %d\n", ret);
+		return;
+	}
+
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		debug("DRAM init failed: %d\n", ret);
+		return;
+	}
+}
+
+void board_return_to_bootrom(void)
+{
+	back_to_bootrom();
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_BOOTROM;
+}
+
+void spl_board_init(void)
+{
+	puts("\nU-Boot TPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \
+				U_BOOT_TIME ")\n");
+}
diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig
index 4ad2940..6beb26f 100644
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -87,6 +87,22 @@
 config TARGET_VYASA_RK3288
 	bool "Vyasa-RK3288"
 	select BOARD_LATE_INIT
+	select TPL
+	select SUPPORT_TPL
+	select TPL_DM
+	select TPL_REGMAP
+	select TPL_SYSCON
+	select TPL_CLK
+	select TPL_RAM
+	select TPL_OF_PLATDATA
+	select TPL_OF_CONTROL
+	select TPL_BOOTROM_SUPPORT
+	select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
+	select ROCKCHIP_BROM_HELPER
+	select TPL_DRIVERS_MISC_SUPPORT
+	select TPL_LIBCOMMON_SUPPORT
+	select TPL_LIBGENERIC_SUPPORT
+	select TPL_SERIAL_SUPPORT
 	help
 	  Vyasa is a RK3288-based development board with 2 USB ports,
 	  HDMI, VGA, micro-SD card, audio, WiFi  and Gigabit Ethernet, It
diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig
index 7db7b0b..7bd6068 100644
--- a/configs/vyasa-rk3288_defconfig
+++ b/configs/vyasa-rk3288_defconfig
@@ -1,8 +1,11 @@
 CONFIG_ARM=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_ROCKCHIP_RK3288=y
 CONFIG_TARGET_VYASA_RK3288=y
+CONFIG_TPL_TEXT_BASE=0xff704004
 CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="rk3288-vyasa"
 CONFIG_DEBUG_UART=y
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 12fec38..4b7be0b 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -150,6 +150,24 @@
       debug uart must be disabled
 
 
+Booting from an SD card on RK3288 with TPL
+==========================================
+
+Since the size of SPL can't be exceeded 0x8000 bytes in RK3288, it is not possible add
+new SPL features like Falcon mode or etc.
+
+So introduce TPL so-that adding new features to SPL is possible because now TPL should
+run minimal with code like DDR, clock etc and rest of new features in SPL.
+
+As of now TPL is added on Vyasa-RK3288 board.
+
+To write an image that boots from an SD card (assumed to be /dev/mmcblk0):
+
+   ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out &&
+    cat ./spl/u-boot-spl-dtb.bin >> out &&
+    sudo dd if=out of=/dev/mmcblk0 seek=64 &&
+    sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 seek=256
+
 Booting from an SD card on RK3188
 =================================
 
diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index e9e3c40..34f2558 100644
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -32,7 +32,11 @@
 #define CONFIG_SYS_INIT_SP_ADDR		0x00100000
 #define CONFIG_SYS_LOAD_ADDR		0x00800800
 #define CONFIG_SPL_STACK		0xff718000
-#define CONFIG_SPL_TEXT_BASE		0xff704004
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
+# define CONFIG_SPL_TEXT_BASE		0x0
+#else
+# define CONFIG_SPL_TEXT_BASE		0xff704004
+#endif
 
 /* MMC/SD IP block */
 #define CONFIG_BOUNCE_BUFFER