/*
 * [origin: Linux kernel include/asm-arm/arch-at91/at91_pio.h]
 *
 * Copyright (C) 2005 Ivan Kokshaysky
 * Copyright (C) SAN People
 * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
 *
 * Parallel I/O Controller (PIO) - System peripherals registers.
 * Based on AT91RM9200 datasheet revision E.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#ifndef AT91_PIO_H
#define AT91_PIO_H


#define AT91_ASM_PIO_RANGE	0x200
#define AT91_ASM_PIOC_PDR	\
	(AT91_PIO_BASE + AT91_PIO_PORTC*AT91_ASM_PIO_RANGE + 0x04)
#define AT91_ASM_PIOC_PUDR	\
	(AT91_PIO_BASE + AT91_PIO_PORTC*AT91_ASM_PIO_RANGE + 0x60)

#define AT91_ASM_PIOD_PDR	\
	(AT91_PIO_BASE + AT91_PIO_PORTD*AT91_ASM_PIO_RANGE + 0x04)
#define AT91_ASM_PIOD_PUDR	\
	(AT91_PIO_BASE + AT91_PIO_PORTD*AT91_ASM_PIO_RANGE + 0x60)
#define AT91_ASM_PIOD_ASR	\
	(AT91_PIO_BASE + AT91_PIO_PORTD*AT91_ASM_PIO_RANGE + 0x70)

#ifndef __ASSEMBLY__

typedef struct at91_port {
	u32	per;		/* 0x00 PIO Enable Register */
	u32	pdr;		/* 0x04 PIO Disable Register */
	u32	psr;		/* 0x08 PIO Status Register */
	u32	reserved0;
	u32	oer;		/* 0x10 Output Enable Register */
	u32	odr;		/* 0x14 Output Disable Registerr */
	u32	osr;		/* 0x18 Output Status Register */
	u32	reserved1;
	u32	ifer;		/* 0x20 Input Filter Enable Register */
	u32	ifdr;		/* 0x24 Input Filter Disable Register */
	u32	ifsr;		/* 0x28 Input Filter Status Register */
	u32	reserved2;
	u32	sodr;		/* 0x30 Set Output Data Register */
	u32	codr;		/* 0x34 Clear Output Data Register */
	u32	odsr;		/* 0x38 Output Data Status Register */
	u32	pdsr;		/* 0x3C Pin Data Status Register */
	u32	ier;		/* 0x40 Interrupt Enable Register */
	u32	idr;		/* 0x44 Interrupt Disable Register */
	u32	imr;		/* 0x48 Interrupt Mask Register */
	u32	isr;		/* 0x4C Interrupt Status Register */
	u32	mder;		/* 0x50 Multi-driver Enable Register */
	u32	mddr;		/* 0x54 Multi-driver Disable Register */
	u32	mdsr;		/* 0x58 Multi-driver Status Register */
	u32	reserved3;
	u32	pudr;		/* 0x60 Pull-up Disable Register */
	u32	puer;		/* 0x64 Pull-up Enable Register */
	u32	pusr;		/* 0x68 Pad Pull-up Status Register */
	u32	reserved4;
	u32	asr;		/* 0x70 Select A Register */
	u32	bsr;		/* 0x74 Select B Register */
	u32	absr;		/* 0x78 AB Select Status Register */
	u32	reserved5[9];	/*  */
	u32	ower;		/* 0xA0 Output Write Enable Register */
	u32	owdr;		/* 0xA4 Output Write Disable Register */
	u32	owsr;		/* OxA8 utput Write Status Register */
	u32	reserved6[85];
} at91_port_t;

#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) || \
	defined(CONFIG_AT91SAM9G10) || defined(CONFIG_AT91SAM9G20)
#define AT91_PIO_PORTS	3
#elif defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G45) || \
	defined(CONFIG_AT91SAM9M10G45)
#define AT91_PIO_PORTS	5
#elif defined(CONFIG_AT91RM9200) || defined(CONFIG_AT91CAP9) || \
	defined(CONFIG_AT91SAM9RL)
#define AT91_PIO_PORTS	4
#else
#error "Unsupported cpu. Please update at91_pio.h"
#endif

typedef union at91_pio {
	struct {
		at91_port_t	pioa;
		at91_port_t	piob;
		at91_port_t	pioc;
	#if (AT91_PIO_PORTS > 3)
		at91_port_t	piod;
	#endif
	#if (AT91_PIO_PORTS > 4)
		at91_port_t	pioe;
	#endif
	} ;
	at91_port_t port[AT91_PIO_PORTS];
} at91_pio_t;

#endif

#define AT91_PIN_TO_MASK(x)	(1<<x)
#define AT91_PORTPIN(PORT, PIN)	((0x0##PORT - 9) * 32 + ((PIN) & 0x1F))
#define	AT91_PIO_PORTA		0x0
#define	AT91_PIO_PORTB		0x1
#define	AT91_PIO_PORTC		0x2
#define	AT91_PIO_PORTD		0x3
#define	AT91_PIO_PORTE		0x4

#ifdef CONFIG_AT91_LEGACY

#define PIO_PER		0x00	/* Enable Register */
#define PIO_PDR		0x04	/* Disable Register */
#define PIO_PSR		0x08	/* Status Register */
#define PIO_OER		0x10	/* Output Enable Register */
#define PIO_ODR		0x14	/* Output Disable Register */
#define PIO_OSR		0x18	/* Output Status Register */
#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
#define PIO_SODR	0x30	/* Set Output Data Register */
#define PIO_CODR	0x34	/* Clear Output Data Register */
#define PIO_ODSR	0x38	/* Output Data Status Register */
#define PIO_PDSR	0x3c	/* Pin Data Status Register */
#define PIO_IER		0x40	/* Interrupt Enable Register */
#define PIO_IDR		0x44	/* Interrupt Disable Register */
#define PIO_IMR		0x48	/* Interrupt Mask Register */
#define PIO_ISR		0x4c	/* Interrupt Status Register */
#define PIO_MDER	0x50	/* Multi-driver Enable Register */
#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
#define PIO_MDSR	0x58	/* Multi-driver Status Register */
#define PIO_PUDR	0x60	/* Pull-up Disable Register */
#define PIO_PUER	0x64	/* Pull-up Enable Register */
#define PIO_PUSR	0x68	/* Pull-up Status Register */
#define PIO_ASR		0x70	/* Peripheral A Select Register */
#define PIO_BSR		0x74	/* Peripheral B Select Register */
#define PIO_ABSR	0x78	/* AB Status Register */
#define PIO_OWER	0xa0	/* Output Write Enable Register */
#define PIO_OWDR	0xa4	/* Output Write Disable Register */
#define PIO_OWSR	0xa8	/* Output Write Status Register */
#endif

#endif