// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2023 Gateworks Corporation
 */
#include "imx8mp-venice-gw702x-u-boot.dtsi"

&ethphy0 {
	reset-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
	reset-delay-us = <1000>;
	reset-post-delay-us = <300000>;
};

&gpio4 {
	dio_1 {
		gpio-hog;
		input;
		gpios = <8 GPIO_ACTIVE_HIGH>;
		line-name = "dio1";
	};

	dio_0 {
		gpio-hog;
		input;
		gpios = <11 GPIO_ACTIVE_HIGH>;
		line-name = "dio0";
	};

	pci_usb_sel {
		gpio-hog;
		output-low;
		gpios = <14 GPIO_ACTIVE_HIGH>;
		line-name = "pci_usb_sel";
	};

	mipi_gpio4 {
		gpio-hog;
		input;
		gpios = <17 GPIO_ACTIVE_HIGH>;
		line-name = "mipi_gpio4";
	};

	rs485_en {
		gpio-hog;
		output-low;
		gpios = <22 GPIO_ACTIVE_HIGH>;
		line-name = "rs485_en";
	};

	rs485_term {
		gpio-hog;
		output-low;
		gpios = <23 GPIO_ACTIVE_HIGH>;
		line-name = "rs485_term";
	};

	mipi_gpio1 {
		gpio-hog;
		input;
		gpios = <24 GPIO_ACTIVE_HIGH>;
		line-name = "mipi_gpio1";
	};

	mipi_gpio3 {
		gpio-hog;
		input;
		gpios = <25 GPIO_ACTIVE_HIGH>;
		line-name = "mipi_gpio3";
	};

	mipi_gpio2 {
		gpio-hog;
		input;
		gpios = <26 GPIO_ACTIVE_HIGH>;
		line-name = "mipi_gpio2";
	};

	rs485_hd {
		gpio-hog;
		output-low;
		gpios = <27 GPIO_ACTIVE_HIGH>;
		line-name = "rs485_hd";
	};

	pci_wdis {
		gpio-hog;
		output-high;
		gpios = <28 GPIO_ACTIVE_HIGH>;
		line-name = "pci_wdis#";
	};
};

/* gpio-usb-con not supported yet in U-Boot so make this a host for now */
&usb_dwc3_0 {
	dr_mode = "host";
};