CONFIG_ARM=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_SPL_SYS_THUMB_BUILD=y
CONFIG_ARCH_ASPEED=y
CONFIG_SYS_TEXT_BASE=0x80000000
CONFIG_SYS_MALLOC_LEN=0x2000000
CONFIG_SYS_MALLOC_F_LEN=0x800
CONFIG_ASPEED_AST2600=y
CONFIG_TARGET_EVB_AST2600=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x10000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="ast2600-evb"
CONFIG_SPL_SERIAL=y
CONFIG_SPL_STACK_R_ADDR=0x83000000
CONFIG_SPL_SIZE_LIMIT=0x10000
CONFIG_SPL=y
# CONFIG_ARMV7_NONSEC is not set
CONFIG_SYS_LOAD_ADDR=0x83000000
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT=y
CONFIG_SPL_FIT_SIGNATURE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run bootspi"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000000
CONFIG_SPL_FIT_IMAGE_TINY=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_REGMAP=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_DM_HASH=y
CONFIG_HASH_ASPEED=y
CONFIG_ASPEED_ACRY=y
CONFIG_ASPEED_GPIO=y
CONFIG_DM_I2C=y
CONFIG_MISC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ASPEED=y
CONFIG_PHY_REALTEK=y
CONFIG_DM_ETH=y
CONFIG_DM_MDIO=y
CONFIG_FTGMAC100=y
CONFIG_ASPEED_MDIO=y
CONFIG_PHY=y
CONFIG_PINCTRL=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_DM_RESET=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_WDT=y
CONFIG_SHA384=y
CONFIG_HEXDUMP=y
# CONFIG_EFI_LOADER is not set
CONFIG_PHANDLE_CHECK_SEQ=y