CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SYS_TEXT_BASE=0x80100000
CONFIG_TI_COMMON_CMD_OPTIONS=y
# CONFIG_SPL_GPIO_SUPPORT is not set
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
CONFIG_NR_DRAM_BANKS=2
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_ANDROID_BOOT_IMAGE=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEFAULT_FDT_FILE="logicpd-torpedo-35xx-devkit.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="OMAP Logic # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x240000
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-35xx-devkit"
# CONFIG_ENV_IS_IN_FAT is not set
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x08000000
CONFIG_SMC911X_32_BIT=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_OMAP2PLUS=y
CONFIG_TWL4030_USB=y
CONFIG_BCH=y