// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2019 NXP
 */

#include "imx8mm-u-boot.dtsi"

/ {
	wdt-reboot {
		compatible = "wdt-reboot";
		wdt = <&wdog1>;
		bootph-pre-ram;
	};
};

&aips4 {
	bootph-pre-ram;
};

&reg_usdhc2_vmmc {
	u-boot,off-on-delay-us = <20000>;
};

&pinctrl_reg_usdhc2_vmmc {
	bootph-pre-ram;
};

&pinctrl_uart2 {
	bootph-pre-ram;
};

&pinctrl_usdhc2_gpio {
	bootph-pre-ram;
};

&pinctrl_usdhc2 {
	bootph-pre-ram;
};

&pinctrl_usdhc3 {
	bootph-pre-ram;
};

&gpio1 {
	bootph-pre-ram;
};

&gpio2 {
	bootph-pre-ram;
};

&gpio3 {
	bootph-pre-ram;
};

&gpio4 {
	bootph-pre-ram;
};

&gpio5 {
	bootph-pre-ram;
};

&uart2 {
	bootph-pre-ram;
};

&usbmisc1 {
	bootph-pre-ram;
};

&usbphynop1 {
	bootph-pre-ram;
};

&usbotg1 {
	bootph-pre-ram;
};

&usdhc1 {
	bootph-pre-ram;
};

&usdhc2 {
	bootph-pre-ram;
	sd-uhs-sdr104;
	sd-uhs-ddr50;
	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
	assigned-clock-rates = <400000000>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
};

&usdhc3 {
	bootph-pre-ram;
	mmc-hs400-1_8v;
	mmc-hs400-enhanced-strobe;
	/*
	 * prevents voltage switch warn: driver will switch even at
	 * fixed voltage
	 */
	/delete-property/ vmmc-supply;
	/delete-property/ vqmmc-supply;
	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
	assigned-clock-rates = <400000000>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
};

&i2c1 {
	bootph-pre-ram;
};

&{/soc@0/bus@30800000/i2c@30a20000/pmic@25} {
	bootph-pre-ram;
};

&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} {
	bootph-pre-ram;
};

&pinctrl_i2c1 {
	bootph-pre-ram;
};

&pinctrl_pmic {
	bootph-pre-ram;
};

&wdog1 {
	bootph-pre-ram;
};