menu "MediaTek MIPS platforms"
	depends on ARCH_MTMIPS

config SYS_MALLOC_F_LEN
	default 0x1000

config SYS_SOC
	default "mt7628" if SOC_MT7628

config SYS_DCACHE_SIZE
	default 32768

config SYS_DCACHE_LINE_SIZE
	default 32

config SYS_ICACHE_SIZE
	default 65536

config SYS_ICACHE_LINE_SIZE
	default 32

config SYS_TEXT_BASE
	default 0x9c000000 if !SPL
	default 0x80200000 if SPL

config SPL_TEXT_BASE
	default 0x9c000000

config SPL_PAYLOAD
	default "u-boot-lzma.img" if SPL_LZMA

config BUILD_TARGET
	default "u-boot-with-spl.bin" if SPL

choice
	prompt "MediaTek MIPS SoC select"

config SOC_MT7628
	bool "MT7628"
	select MIPS_L1_CACHE_SHIFT_5
	select MIPS_INIT_STACK_IN_SRAM
	select MIPS_SRAM_INIT
	select SYS_MIPS_CACHE_INIT_RAM_LOAD
	select PINCTRL_MT7628
	select MTK_SERIAL
	select SYSRESET_RESETCTL
	select SPL_SEPARATE_BSS if SPL
	select SPL_INIT_STACK_WITHOUT_MALLOC_F if SPL
	select SPL_LOADER_SUPPORT if SPL
	select SPL_OF_CONTROL if SPL_DM
	select SPL_SIMPLE_BUS if SPL_DM
	select SPL_DM_SERIAL if SPL_DM
	select SPL_CLK if SPL_DM && SPL_SERIAL_SUPPORT
	select SPL_SYSRESET if SPL_DM
	select SPL_OF_LIBFDT if SPL_OF_CONTROL
	help
	  This supports MediaTek MT7628/MT7688.

endchoice

choice
	prompt "Board select"

config BOARD_GARDENA_SMART_GATEWAY_MT7688
	bool "GARDENA smart Gateway"
	depends on SOC_MT7628
	select BOARD_LATE_INIT
	help
	  GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
	  and 8 MiB of flash (SPI NOR) and additional SPI NAND storage.

config BOARD_LINKIT_SMART_7688
	bool "LinkIt Smart 7688"
	depends on SOC_MT7628
	help
	  Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM
	  and 32 MiB of flash (SPI).
	  Between its different peripherals there's an integrated switch with 4
	  ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
	  a MT7688 (PCIe).

config BOARD_MT7628_RFB
	bool "MediaTek MT7628 RFB"
	depends on SOC_MT7628
	help
	  The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB
	  SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
	  1 SDXC, 1 PCIe socket and JTAG pins.

config BOARD_VOCORE2
	bool "VoCore2"
	depends on SOC_MT7628
	select SPL_SERIAL_SUPPORT
	select SPL_UART2_SPIS_PINMUX
	help
	  VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
	  and 16 MiB of flash (SPI).

endchoice

config SPL_UART2_SPIS_PINMUX
	bool "Use alternative pinmux for UART2 in SPL stage"
	depends on SPL_SERIAL_SUPPORT
	default n
	help
	  Select this if the UART2 of your board is connected to GPIO 16/17
	  (shared with SPIS) rather than the usual GPIO 20/21.

source "board/gardena/smart-gateway-mt7688/Kconfig"
source "board/mediatek/mt7628/Kconfig"
source "board/seeed/linkit-smart-7688/Kconfig"
source "board/vocore/vocore2/Kconfig"

endmenu