// SPDX-License-Identifier: GPL-2.0
/*
 * AM62A7 SK dts file for R5 SPL
 * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
 */

#include "k3-am62a7-sk.dts"
#include "k3-am62a-ddr-1866mhz-32bit.dtsi"
#include "k3-am62a-ddr.dtsi"
#include "k3-am62a-sk-binman.dtsi"

#include "k3-am62a7-sk-u-boot.dtsi"

/ {
	aliases {
		remoteproc0 = &sysctrler;
		remoteproc1 = &a53_0;
		serial0 = &wkup_uart0;
		serial3 = &main_uart1;
	};

	chosen {
		stdout-path = "serial2:115200n8";
		tick-timer = &timer1;
	};

	memory@80000000 {
		device_type = "memory";
		/* 4G RAM */
		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
		      <0x00000008 0x80000000 0x00000000 0x80000000>;
		bootph-pre-ram;
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		secure_ddr: optee@9e800000 {
			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
			alignment = <0x1000>;
			no-map;
		};
	};

	a53_0: a53@0 {
		compatible = "ti,am654-rproc";
		reg = <0x00 0x00a90000 0x00 0x10>;
		power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
				<&k3_pds 135 TI_SCI_PD_EXCLUSIVE>,
				<&k3_pds 166 TI_SCI_PD_EXCLUSIVE>;
		resets = <&k3_reset 135 0>;
		clocks = <&k3_clks 61 0>;
		assigned-clocks = <&k3_clks 61 0>, <&k3_clks 135 0>;
		assigned-clock-parents = <&k3_clks 61 2>;
		assigned-clock-rates = <200000000>, <1200000000>;
		ti,sci = <&dmsc>;
		ti,sci-proc-id = <32>;
		ti,sci-host-id = <10>;
		bootph-pre-ram;
	};

	dm_tifs: dm-tifs {
		compatible = "ti,j721e-dm-sci";
		ti,host-id = <36>;
		ti,secure-host;
		mbox-names = "rx", "tx";
		mboxes= <&secure_proxy_main 22>,
			<&secure_proxy_main 23>;
		bootph-pre-ram;
	};
};

&dmsc {
	mboxes= <&secure_proxy_main 0>,
		<&secure_proxy_main 1>,
		<&secure_proxy_main 0>;
	mbox-names = "rx", "tx", "notify";
	ti,host-id = <35>;
	ti,secure-host;
};

&cbass_main {
	sa3_secproxy: secproxy@44880000 {
		compatible = "ti,am654-secure-proxy";
		#mbox-cells = <1>;
		reg = <0x00 0x44880000 0x00 0x20000>,
		      <0x0 0x44860000 0x0 0x20000>,
		      <0x0 0x43600000 0x0 0x10000>;
		reg-names = "rt", "scfg", "target_data";
		bootph-pre-ram;
	};

	sysctrler: sysctrler {
		compatible = "ti,am654-system-controller";
		mboxes= <&secure_proxy_main 1>,
			<&secure_proxy_main 0>,
			<&sa3_secproxy 0>;
		mbox-names = "tx", "rx", "boot_notify";
		bootph-pre-ram;
	};
};

&mcu_pmx0 {
	status = "okay";
	bootph-pre-ram;

	wkup_uart0_pins_default: wkup-uart0-pins-default {
		pinctrl-single,pins = <
			AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0)	/* (C6) WKUP_UART0_CTSn */
			AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0)	/* (A4) WKUP_UART0_RTSn */
			AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0)	/* (B4) WKUP_UART0_RXD */
			AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0)	/* (C5) WKUP_UART0_TXD */
		>;
		bootph-pre-ram;
	};
};

&main_pmx0 {
	bootph-pre-ram;
	main_uart1_pins_default: main-uart1-pins-default {
		pinctrl-single,pins = <
			AM62X_IOPAD(0x194, PIN_INPUT, 2)	/* (B19) MCASP0_AXR3.UART1_CTSn */
			AM62X_IOPAD(0x198, PIN_OUTPUT, 2)	/* (A19) MCASP0_AXR2.UART1_RTSn */
			AM62X_IOPAD(0x1ac, PIN_INPUT, 2)	/* (E19) MCASP0_AFSR.UART1_RXD */
			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2)	/* (A20) MCASP0_ACLKR.UART1_TXD */
		>;
		bootph-pre-ram;
	};
};

/* WKUP UART0 is used for DM firmware logs */
&wkup_uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&wkup_uart0_pins_default>;
	status = "okay";
	bootph-pre-ram;
};

/* Main UART1 is used for TIFS firmware logs */
&main_uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&main_uart1_pins_default>;
	status = "okay";
	bootph-pre-ram;
};