diff --git a/doc/README.rockchip b/doc/README.rockchip
index 9542265..db5724e 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -262,7 +262,7 @@
    dd if=out.bin of=out.bin.pad bs=4M conv=sync
 
 This converts the SPL image to the required SPI format by adding the Rockchip
-header and skipping every 2KB block. Then the U-Boot image is written at
+header and skipping every second 2KB block. Then the U-Boot image is written at
 offset 128KB and the whole image is padded to 4MB which is the SPI flash size.
 The position of U-Boot is controlled with this setting in U-Boot: