rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/Makefile b/Makefile
index 7c6c786..c711df6 100644
--- a/Makefile
+++ b/Makefile
@@ -1701,7 +1701,7 @@
ISPAN_REVB_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _REVB_,$@)" ] ; then \
- echo "#define CFG_REV_B" > $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
@@ -1728,8 +1728,8 @@
@mkdir -p $(obj)include
@mkdir -p $(obj)board/freescale/mpc8260ads
$(if $(findstring PQ2FADS,$@), \
- @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \
- @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
+ @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
+ @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
$(if $(findstring MHz,$@), \
@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
$(if $(findstring VR,$@), \
@@ -1981,19 +1981,19 @@
M54451EVB_stmicro_config) FLASH=STMICRO;; \
esac; \
if [ "$${FLASH}" = "SPANSION" ] ; then \
- echo "#define CFG_SPANSION_BOOT" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
$(XECHO) "... with SPANSION boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
- echo "#define CFG_STMICRO_BOOT" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
$(XECHO) "... with ST Micro boot..." ; \
fi; \
- echo "#define CFG_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
+ echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
@$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
M54455EVB_config \
@@ -2015,25 +2015,25 @@
M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \
esac; \
if [ "$${FLASH}" = "INTEL" ] ; then \
- echo "#define CFG_INTEL_BOOT" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
$(XECHO) "... with INTEL boot..." ; \
fi; \
if [ "$${FLASH}" = "ATMEL" ] ; then \
- echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
$(XECHO) "... with ATMEL boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
- echo "#define CFG_STMICRO_BOOT" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
$(XECHO) "... with ST Micro boot..." ; \
fi; \
- echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
$(XECHO) "... with $${FREQ}Hz input clock"
@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
@@ -2053,20 +2053,20 @@
M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
esac; \
- echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \
- echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
- echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
- echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
- echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
- echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
- echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
@@ -2088,20 +2088,20 @@
M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
esac; \
- echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \
- echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
- echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
- echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
- echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
- echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
- echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
@@ -2120,11 +2120,11 @@
@mkdir -p $(obj)board/freescale/mpc8313erdb
@if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "...33M ..." ; \
- echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
$(XECHO) -n "...66M..." ; \
- echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _NAND_,$@)" ] ; then \
$(XECHO) -n "...NAND..." ; \
diff --git a/README b/README
index c63c720..ebee20f 100644
--- a/README
+++ b/README
@@ -210,7 +210,7 @@
* Configuration _SETTINGS_:
These depend on the hardware etc. and should not be meddled with if
you don't know what you're doing; they have names beginning with
- "CFG_".
+ "CONFIG_SYS_".
Later we will add a configuration tool - probably similar to or even
identical to what's used for the Linux kernel. Right now, we have to
@@ -284,10 +284,10 @@
- Board flavour: (if CONFIG_MPC8260ADS is defined)
CONFIG_ADSTYPE
Possible values are:
- CFG_8260ADS - original MPC8260ADS
- CFG_8266ADS - MPC8266ADS
- CFG_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR
- CFG_8272ADS - MPC8272ADS
+ CONFIG_SYS_8260ADS - original MPC8260ADS
+ CONFIG_SYS_8266ADS - MPC8266ADS
+ CONFIG_SYS_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR
+ CONFIG_SYS_8272ADS - MPC8272ADS
- MPC824X Family Member (if CONFIG_MPC824X is defined)
Define exactly one of
@@ -302,28 +302,28 @@
or XTAL/EXTAL)
- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU):
- CFG_8xx_CPUCLK_MIN
- CFG_8xx_CPUCLK_MAX
+ CONFIG_SYS_8xx_CPUCLK_MIN
+ CONFIG_SYS_8xx_CPUCLK_MAX
CONFIG_8xx_CPUCLK_DEFAULT
See doc/README.MPC866
- CFG_MEASURE_CPUCLK
+ CONFIG_SYS_MEASURE_CPUCLK
Define this to measure the actual CPU clock instead
of relying on the correctness of the configured
values. Mostly useful for board bringup to make sure
the PLL is locked at the intended frequency. Note
that this requires a (stable) reference clock (32 kHz
- RTC clock or CFG_8XX_XIN)
+ RTC clock or CONFIG_SYS_8XX_XIN)
- Intel Monahans options:
- CFG_MONAHANS_RUN_MODE_OSC_RATIO
+ CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
Defines the Monahans run mode to oscillator
ratio. Valid values are 8, 16, 24, 31. The core
frequency is this value multiplied by 13 MHz.
- CFG_MONAHANS_TURBO_RUN_MODE_RATIO
+ CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO
Defines the Monahans turbo mode to oscillator
ratio. Valid values are 1 (default if undefined) and
@@ -436,7 +436,7 @@
CONFIG_CONSOLE_CURSOR cursor drawing on/off
(requires blink timer
cf. i8042.c)
- CFG_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c)
+ CONFIG_SYS_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c)
CONFIG_CONSOLE_TIME display time/date info in
upper right corner
(requires CONFIG_CMD_DATE)
@@ -461,8 +461,8 @@
- Console Baudrate:
CONFIG_BAUDRATE - in bps
Select one of the baudrates listed in
- CFG_BAUDRATE_TABLE, see below.
- CFG_BRGCLK_PRESCALE, baudrate prescale
+ CONFIG_SYS_BAUDRATE_TABLE, see below.
+ CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale
- Interrupt driven serial port input:
CONFIG_SERIAL_SOFTWARE_FIFO
@@ -546,7 +546,7 @@
- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined)
CONFIG_KGDB_BAUDRATE
Select one of the baudrates listed in
- CFG_BAUDRATE_TABLE, see below.
+ CONFIG_SYS_BAUDRATE_TABLE, see below.
- Monitor Functions:
Monitor commands can be included or excluded
@@ -673,7 +673,7 @@
CONFIG_RTC_DS164x - use Dallas DS164x RTC
CONFIG_RTC_ISL1208 - use Intersil ISL1208 RTC
CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC
- CFG_RTC_DS1337_NOOSC - Turn off the OSC output for DS1337
+ CONFIG_SYS_RTC_DS1337_NOOSC - Turn off the OSC output for DS1337
Note that if the RTC uses I2C, then the I2C interface
must also be configured. See I2C Support, below.
@@ -711,11 +711,11 @@
CONFIG_LBA48
Set this to enable support for disks larger than 137GB
- Also look at CFG_64BIT_LBA ,CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL
+ Also look at CONFIG_SYS_64BIT_LBA ,CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
Whithout these , LBA48 support uses 32bit variables and will 'only'
support disks up to 2.1TB.
- CFG_64BIT_LBA:
+ CONFIG_SYS_64BIT_LBA:
When enabled, makes the IDE subsystem use 64bit sector addresses.
Default is 32bit.
@@ -724,12 +724,12 @@
SYM53C8XX SCSI controller; define
CONFIG_SCSI_SYM53C8XX to enable it.
- CFG_SCSI_MAX_LUN [8], CFG_SCSI_MAX_SCSI_ID [7] and
- CFG_SCSI_MAX_DEVICE [CFG_SCSI_MAX_SCSI_ID *
- CFG_SCSI_MAX_LUN] can be adjusted to define the
+ CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and
+ CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID *
+ CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the
maximum numbers of LUNs, SCSI ID's and target
devices.
- CFG_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
+ CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
- NETWORK Support (PCI):
CONFIG_E1000
@@ -811,7 +811,7 @@
CONFIG_USB_CONFIG
for differential drivers: 0x00001000
for single ended drivers: 0x00005000
- CFG_USB_EVENT_POLL
+ CONFIG_SYS_USB_EVENT_POLL
May be defined to allow interrupt polling
instead of using asynchronous interrupts
@@ -838,18 +838,18 @@
Define this to have a tty type of device available to
talk to the UDC device
- CFG_CONSOLE_IS_IN_ENV
+ CONFIG_SYS_CONSOLE_IS_IN_ENV
Define this if you want stdin, stdout &/or stderr to
be set to usbtty.
mpc8xx:
- CFG_USB_EXTC_CLK 0xBLAH
+ CONFIG_SYS_USB_EXTC_CLK 0xBLAH
Derive USB clock from external clock "blah"
- - CFG_USB_EXTC_CLK 0x02
+ - CONFIG_SYS_USB_EXTC_CLK 0x02
- CFG_USB_BRG_CLK 0xBLAH
+ CONFIG_SYS_USB_BRG_CLK 0xBLAH
Derive USB clock from brgclk
- - CFG_USB_BRG_CLK 0x04
+ - CONFIG_SYS_USB_BRG_CLK 0x04
If you have a USB-IF assigned VendorID then you may wish to
define your own vendor specific values either in BoardName.h
@@ -891,16 +891,16 @@
CONFIG_JFFS2_NAND_DEV
Define these for a default partition on a NAND device
- CFG_JFFS2_FIRST_SECTOR,
- CFG_JFFS2_FIRST_BANK, CFG_JFFS2_NUM_BANKS
+ CONFIG_SYS_JFFS2_FIRST_SECTOR,
+ CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS
Define these for a default partition on a NOR device
- CFG_JFFS_CUSTOM_PART
+ CONFIG_SYS_JFFS_CUSTOM_PART
Define this to create an own partition. You have to provide a
function struct part_info* jffs2_part_info(int part_num)
If you define only one JFFS2 partition you may also want to
- #define CFG_JFFS_SINGLE_PART 1
+ #define CONFIG_SYS_JFFS_SINGLE_PART 1
to disable the command chpart. This is the default when you
have not defined a custom partition
@@ -1014,7 +1014,7 @@
320x240. Black & white.
Normally display is black on white background; define
- CFG_WHITE_ON_BLACK to get it inverted.
+ CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
- Splash Screen Support: CONFIG_SPLASH_SCREEN
@@ -1041,7 +1041,7 @@
compressed images are supported.
NOTE: the bzip2 algorithm requires a lot of RAM, so
- the malloc area (as defined by CFG_MALLOC_LEN) should
+ the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should
be at least 4MB.
CONFIG_LZMA
@@ -1065,7 +1065,7 @@
Use the lzmainfo tool to determinate the lc and lp values and
then calculate the amount of needed dynamic memory (ensuring
- the appropriate CFG_MALLOC_LEN value).
+ the appropriate CONFIG_SYS_MALLOC_LEN value).
- MII/PHY support:
CONFIG_PHY_ADDR
@@ -1282,15 +1282,15 @@
There are several other quantities that must also be
defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C.
- In both cases you will need to define CFG_I2C_SPEED
+ In both cases you will need to define CONFIG_SYS_I2C_SPEED
to be the frequency (in Hz) at which you wish your i2c bus
- to run and CFG_I2C_SLAVE to be the address of this node (ie
+ to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie
the CPU's i2c node address).
Now, the u-boot i2c code for the mpc8xx (cpu/mpc8xx/i2c.c)
sets the CPU up as a master node and so its address should
therefore be cleared to 0 (See, eg, MPC823e User's Manual
- p.16-473). So, set CFG_I2C_SLAVE to 0.
+ p.16-473). So, set CONFIG_SYS_I2C_SLAVE to 0.
That's all that's required for CONFIG_HARD_I2C.
@@ -1361,7 +1361,7 @@
#define I2C_DELAY udelay(2)
- CFG_I2C_INIT_BOARD
+ CONFIG_SYS_I2C_INIT_BOARD
When a board is reset during an i2c bus transfer
chips might think that the current transfer is still
@@ -1385,7 +1385,7 @@
active. To switch to a different bus, use the 'i2c dev' command.
Note that bus numbering is zero-based.
- CFG_I2C_NOPROBES
+ CONFIG_SYS_I2C_NOPROBES
This option specifies a list of I2C devices that will be skipped
when the 'i2c probe' command is issued (or 'iprobe' using the legacy
@@ -1394,31 +1394,31 @@
e.g.
#undef CONFIG_I2C_MULTI_BUS
- #define CFG_I2C_NOPROBES {0x50,0x68}
+ #define CONFIG_SYS_I2C_NOPROBES {0x50,0x68}
will skip addresses 0x50 and 0x68 on a board with one I2C bus
#define CONFIG_I2C_MULTI_BUS
- #define CFG_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}}
+ #define CONFIG_SYS_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}}
will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1
- CFG_SPD_BUS_NUM
+ CONFIG_SYS_SPD_BUS_NUM
If defined, then this indicates the I2C bus number for DDR SPD.
If not defined, then U-Boot assumes that SPD is on I2C bus 0.
- CFG_RTC_BUS_NUM
+ CONFIG_SYS_RTC_BUS_NUM
If defined, then this indicates the I2C bus number for the RTC.
If not defined, then U-Boot assumes that RTC is on I2C bus 0.
- CFG_DTT_BUS_NUM
+ CONFIG_SYS_DTT_BUS_NUM
If defined, then this indicates the I2C bus number for the DTT.
If not defined, then U-Boot assumes that DTT is on I2C bus 0.
- CFG_I2C_DTT_ADDR:
+ CONFIG_SYS_I2C_DTT_ADDR:
If defined, specifies the I2C address of the DTT device.
If not defined, then U-Boot uses predefined value for
@@ -1529,11 +1529,11 @@
Specify the number of FPGA devices to support.
- CFG_FPGA_PROG_FEEDBACK
+ CONFIG_SYS_FPGA_PROG_FEEDBACK
Enable printing of hash marks during FPGA configuration.
- CFG_FPGA_CHECK_BUSY
+ CONFIG_SYS_FPGA_CHECK_BUSY
Enable checks on FPGA configuration interface busy
status by the configuration function. This option
@@ -1545,29 +1545,29 @@
If defined, a function that provides delays in the FPGA
configuration driver.
- CFG_FPGA_CHECK_CTRLC
+ CONFIG_SYS_FPGA_CHECK_CTRLC
Allow Control-C to interrupt FPGA configuration
- CFG_FPGA_CHECK_ERROR
+ CONFIG_SYS_FPGA_CHECK_ERROR
Check for configuration errors during FPGA bitfile
loading. For example, abort during Virtex II
configuration if the INIT_B line goes low (which
indicated a CRC error).
- CFG_FPGA_WAIT_INIT
+ CONFIG_SYS_FPGA_WAIT_INIT
Maximum time to wait for the INIT_B line to deassert
after PROB_B has been deasserted during a Virtex II
FPGA configuration sequence. The default time is 500
ms.
- CFG_FPGA_WAIT_BUSY
+ CONFIG_SYS_FPGA_WAIT_BUSY
Maximum time to wait for BUSY to deassert during
Virtex II FPGA configuration. The default is 5 ms.
- CFG_FPGA_WAIT_CONFIG
+ CONFIG_SYS_FPGA_WAIT_CONFIG
Time to wait after FPGA configuration. The default is
200 ms.
@@ -1665,7 +1665,7 @@
for the "hush" shell.
- CFG_HUSH_PARSER
+ CONFIG_SYS_HUSH_PARSER
Define this variable to enable the "hush" shell (from
Busybox) as command line interpreter, thus enabling
@@ -1677,7 +1677,7 @@
with a somewhat smaller memory footprint.
- CFG_PROMPT_HUSH_PS2
+ CONFIG_SYS_PROMPT_HUSH_PS2
This defines the secondary prompt string, which is
printed when the command interpreter needs more input
@@ -1749,10 +1749,10 @@
Adding this option adds support for Xilinx SystemACE
chips attached via some sort of local bus. The address
of the chip must also be defined in the
- CFG_SYSTEMACE_BASE macro. For example:
+ CONFIG_SYS_SYSTEMACE_BASE macro. For example:
#define CONFIG_SYSTEMACE
- #define CFG_SYSTEMACE_BASE 0xf0000000
+ #define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000
When SystemACE support is added, the "ace" device type
becomes available to the fat commands, i.e. fatls.
@@ -2000,53 +2000,53 @@
Configuration Settings:
-----------------------
-- CFG_LONGHELP: Defined when you want long help messages included;
+- CONFIG_SYS_LONGHELP: Defined when you want long help messages included;
undefine this when you're short of memory.
-- CFG_PROMPT: This is what U-Boot prints on the console to
+- CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to
prompt for user input.
-- CFG_CBSIZE: Buffer size for input from the Console
+- CONFIG_SYS_CBSIZE: Buffer size for input from the Console
-- CFG_PBSIZE: Buffer size for Console output
+- CONFIG_SYS_PBSIZE: Buffer size for Console output
-- CFG_MAXARGS: max. Number of arguments accepted for monitor commands
+- CONFIG_SYS_MAXARGS: max. Number of arguments accepted for monitor commands
-- CFG_BARGSIZE: Buffer size for Boot Arguments which are passed to
+- CONFIG_SYS_BARGSIZE: Buffer size for Boot Arguments which are passed to
the application (usually a Linux kernel) when it is
booted
-- CFG_BAUDRATE_TABLE:
+- CONFIG_SYS_BAUDRATE_TABLE:
List of legal baudrate settings for this board.
-- CFG_CONSOLE_INFO_QUIET
+- CONFIG_SYS_CONSOLE_INFO_QUIET
Suppress display of console information at boot.
-- CFG_CONSOLE_IS_IN_ENV
+- CONFIG_SYS_CONSOLE_IS_IN_ENV
If the board specific function
extern int overwrite_console (void);
returns 1, the stdin, stderr and stdout are switched to the
serial port, else the settings in the environment are used.
-- CFG_CONSOLE_OVERWRITE_ROUTINE
+- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
Enable the call to overwrite_console().
-- CFG_CONSOLE_ENV_OVERWRITE
+- CONFIG_SYS_CONSOLE_ENV_OVERWRITE
Enable overwrite of previous console environment settings.
-- CFG_MEMTEST_START, CFG_MEMTEST_END:
+- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END:
Begin and End addresses of the area used by the
simple memory test.
-- CFG_ALT_MEMTEST:
+- CONFIG_SYS_ALT_MEMTEST:
Enable an alternate, more extensive memory test.
-- CFG_MEMTEST_SCRATCH:
+- CONFIG_SYS_MEMTEST_SCRATCH:
Scratch address used by the alternate memory test
You only need to set this if address zero isn't writeable
-- CFG_MEM_TOP_HIDE (PPC only):
- If CFG_MEM_TOP_HIDE is defined in the board config header,
+- CONFIG_SYS_MEM_TOP_HIDE (PPC only):
+ If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header,
this specified memory area will get subtracted from the top
(end) of RAM and won't get "touched" at all by U-Boot. By
fixing up gd->ram_size the Linux kernel should gets passed
@@ -2066,75 +2066,75 @@
non page size aligned address and this could cause major
problems.
-- CFG_TFTP_LOADADDR:
+- CONFIG_SYS_TFTP_LOADADDR:
Default load address for network file downloads
-- CFG_LOADS_BAUD_CHANGE:
+- CONFIG_SYS_LOADS_BAUD_CHANGE:
Enable temporary baudrate change while serial download
-- CFG_SDRAM_BASE:
+- CONFIG_SYS_SDRAM_BASE:
Physical start address of SDRAM. _Must_ be 0 here.
-- CFG_MBIO_BASE:
+- CONFIG_SYS_MBIO_BASE:
Physical start address of Motherboard I/O (if using a
Cogent motherboard)
-- CFG_FLASH_BASE:
+- CONFIG_SYS_FLASH_BASE:
Physical start address of Flash memory.
-- CFG_MONITOR_BASE:
+- CONFIG_SYS_MONITOR_BASE:
Physical start address of boot monitor code (set by
make config files to be same as the text base address
(TEXT_BASE) used when linking) - same as
- CFG_FLASH_BASE when booting from flash.
+ CONFIG_SYS_FLASH_BASE when booting from flash.
-- CFG_MONITOR_LEN:
+- CONFIG_SYS_MONITOR_LEN:
Size of memory reserved for monitor code, used to
determine _at_compile_time_ (!) if the environment is
embedded within the U-Boot image, or in a separate
flash sector.
-- CFG_MALLOC_LEN:
+- CONFIG_SYS_MALLOC_LEN:
Size of DRAM reserved for malloc() use.
-- CFG_BOOTM_LEN:
+- CONFIG_SYS_BOOTM_LEN:
Normally compressed uImages are limited to an
uncompressed size of 8 MBytes. If this is not enough,
- you can define CFG_BOOTM_LEN in your board config file
+ you can define CONFIG_SYS_BOOTM_LEN in your board config file
to adjust this setting to your needs.
-- CFG_BOOTMAPSZ:
+- CONFIG_SYS_BOOTMAPSZ:
Maximum size of memory mapped by the startup code of
the Linux kernel; all data that must be processed by
the Linux kernel (bd_info, boot arguments, FDT blob if
used) must be put below this limit, unless "bootm_low"
enviroment variable is defined and non-zero. In such case
all data for the Linux kernel must be between "bootm_low"
- and "bootm_low" + CFG_BOOTMAPSZ.
+ and "bootm_low" + CONFIG_SYS_BOOTMAPSZ.
-- CFG_MAX_FLASH_BANKS:
+- CONFIG_SYS_MAX_FLASH_BANKS:
Max number of Flash memory banks
-- CFG_MAX_FLASH_SECT:
+- CONFIG_SYS_MAX_FLASH_SECT:
Max number of sectors on a Flash chip
-- CFG_FLASH_ERASE_TOUT:
+- CONFIG_SYS_FLASH_ERASE_TOUT:
Timeout for Flash erase operations (in ms)
-- CFG_FLASH_WRITE_TOUT:
+- CONFIG_SYS_FLASH_WRITE_TOUT:
Timeout for Flash write operations (in ms)
-- CFG_FLASH_LOCK_TOUT
+- CONFIG_SYS_FLASH_LOCK_TOUT
Timeout for Flash set sector lock bit operation (in ms)
-- CFG_FLASH_UNLOCK_TOUT
+- CONFIG_SYS_FLASH_UNLOCK_TOUT
Timeout for Flash clear lock bits operation (in ms)
-- CFG_FLASH_PROTECTION
+- CONFIG_SYS_FLASH_PROTECTION
If defined, hardware flash sectors protection is used
instead of U-Boot software protection.
-- CFG_DIRECT_FLASH_TFTP:
+- CONFIG_SYS_DIRECT_FLASH_TFTP:
Enable TFTP transfers directly to flash memory;
without this option such a download has to be
@@ -2147,7 +2147,7 @@
too limited to allow for a temporary copy of the
downloaded image) this option may be very useful.
-- CFG_FLASH_CFI:
+- CONFIG_SYS_FLASH_CFI:
Define if the flash driver uses extra elements in the
common flash structure for storing flash geometry.
@@ -2155,14 +2155,14 @@
This option also enables the building of the cfi_flash driver
in the drivers directory
-- CFG_FLASH_USE_BUFFER_WRITE
+- CONFIG_SYS_FLASH_USE_BUFFER_WRITE
Use buffered writes to flash.
- CONFIG_FLASH_SPANSION_S29WS_N
s29ws-n MirrorBit flash has non-standard addresses for buffered
write commands.
-- CFG_FLASH_QUIET_TEST
+- CONFIG_SYS_FLASH_QUIET_TEST
If this option is defined, the common CFI flash doesn't
print it's warning upon not recognized FLASH banks. This
is useful, if some of the configured banks are only
@@ -2173,7 +2173,7 @@
digits and dots. Recommended value: 45 (9..1) for 80
column displays, 15 (3..1) for 40 column displays.
-- CFG_RX_ETH_BUFFER:
+- CONFIG_SYS_RX_ETH_BUFFER:
Defines the number of Ethernet receive buffers. On some
Ethernet controllers it is recommended to set this value
to 8 or even higher (EEPRO100 or 405 EMAC), since all
@@ -2208,7 +2208,7 @@
type flash chips the second sector can be used: the offset
for this sector is given here.
- CONFIG_ENV_OFFSET is used relative to CFG_FLASH_BASE.
+ CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE.
- CONFIG_ENV_ADDR:
@@ -2291,24 +2291,24 @@
These two #defines specify the offset and size of the
environment area within the total memory of your EEPROM.
- - CFG_I2C_EEPROM_ADDR:
+ - CONFIG_SYS_I2C_EEPROM_ADDR:
If defined, specified the chip address of the EEPROM device.
The default address is zero.
- - CFG_EEPROM_PAGE_WRITE_BITS:
+ - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS:
If defined, the number of bits used to address bytes in a
single page in the EEPROM device. A 64 byte page, for example
would require six bits.
- - CFG_EEPROM_PAGE_WRITE_DELAY_MS:
+ - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS:
If defined, the number of milliseconds to delay between
page writes. The default is zero milliseconds.
- - CFG_I2C_EEPROM_ADDR_LEN:
+ - CONFIG_SYS_I2C_EEPROM_ADDR_LEN:
The length in bytes of the EEPROM memory array address. Note
that this is NOT the chip address length!
- - CFG_I2C_EEPROM_ADDR_OVERFLOW:
+ - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW:
EEPROM chips that implement "address overflow" are ones
like Catalyst 24WC04/08/16 which has 9/10/11 bits of
address and the extra bits end up in the "chip address" bit
@@ -2319,7 +2319,7 @@
still be one byte because the extra address bits are hidden
in the chip address.
- - CFG_EEPROM_SIZE:
+ - CONFIG_SYS_EEPROM_SIZE:
The size in bytes of the EEPROM device.
@@ -2358,7 +2358,7 @@
to a block boundary, and CONFIG_ENV_SIZE must be a multiple of
the NAND devices block size.
-- CFG_SPI_INIT_OFFSET
+- CONFIG_SYS_SPI_INIT_OFFSET
Defines offset to the initial SPI buffer area in DPRAM. The
area is used at an early stage (ROM part) if the environment
@@ -2384,29 +2384,29 @@
the default environment is used; a new CRC is computed as soon as you
use the "saveenv" command to store a valid environment.
-- CFG_FAULT_ECHO_LINK_DOWN:
+- CONFIG_SYS_FAULT_ECHO_LINK_DOWN:
Echo the inverted Ethernet link state to the fault LED.
- Note: If this option is active, then CFG_FAULT_MII_ADDR
+ Note: If this option is active, then CONFIG_SYS_FAULT_MII_ADDR
also needs to be defined.
-- CFG_FAULT_MII_ADDR:
+- CONFIG_SYS_FAULT_MII_ADDR:
MII address of the PHY to check for the Ethernet link state.
-- CFG_64BIT_VSPRINTF:
+- CONFIG_SYS_64BIT_VSPRINTF:
Makes vsprintf (and all *printf functions) support printing
of 64bit values by using the L quantifier
-- CFG_64BIT_STRTOUL:
+- CONFIG_SYS_64BIT_STRTOUL:
Adds simple_strtoull that returns a 64bit value
Low Level (hardware related) configuration options:
---------------------------------------------------
-- CFG_CACHELINE_SIZE:
+- CONFIG_SYS_CACHELINE_SIZE:
Cache Line Size of the CPU.
-- CFG_DEFAULT_IMMR:
+- CONFIG_SYS_DEFAULT_IMMR:
Default address of the IMMR after system reset.
Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU,
@@ -2414,36 +2414,36 @@
the IMMR register after a reset.
- Floppy Disk Support:
- CFG_FDC_DRIVE_NUMBER
+ CONFIG_SYS_FDC_DRIVE_NUMBER
the default drive number (default value 0)
- CFG_ISA_IO_STRIDE
+ CONFIG_SYS_ISA_IO_STRIDE
defines the spacing between FDC chipset registers
(default value 1)
- CFG_ISA_IO_OFFSET
+ CONFIG_SYS_ISA_IO_OFFSET
defines the offset of register from address. It
depends on which part of the data bus is connected to
the FDC chipset. (default value 0)
- If CFG_ISA_IO_STRIDE CFG_ISA_IO_OFFSET and
- CFG_FDC_DRIVE_NUMBER are undefined, they take their
+ If CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_IO_OFFSET and
+ CONFIG_SYS_FDC_DRIVE_NUMBER are undefined, they take their
default value.
- if CFG_FDC_HW_INIT is defined, then the function
+ if CONFIG_SYS_FDC_HW_INIT is defined, then the function
fdc_hw_init() is called at the beginning of the FDC
setup. fdc_hw_init() must be provided by the board
source code. It is used to make hardware dependant
initializations.
-- CFG_IMMR: Physical address of the Internal Memory.
+- CONFIG_SYS_IMMR: Physical address of the Internal Memory.
DO NOT CHANGE unless you know exactly what you're
doing! (11-4) [MPC8xx/82xx systems only]
-- CFG_INIT_RAM_ADDR:
+- CONFIG_SYS_INIT_RAM_ADDR:
Start address of memory area that can be used for
initial data and stack; please note that this must be
@@ -2458,91 +2458,91 @@
- MPC824X: data cache
- PPC4xx: data cache
-- CFG_GBL_DATA_OFFSET:
+- CONFIG_SYS_GBL_DATA_OFFSET:
Offset of the initial data structure in the memory
- area defined by CFG_INIT_RAM_ADDR. Usually
- CFG_GBL_DATA_OFFSET is chosen such that the initial
+ area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually
+ CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial
data is located at the end of the available space
- (sometimes written as (CFG_INIT_RAM_END -
- CFG_INIT_DATA_SIZE), and the initial stack is just
- below that area (growing from (CFG_INIT_RAM_ADDR +
- CFG_GBL_DATA_OFFSET) downward.
+ (sometimes written as (CONFIG_SYS_INIT_RAM_END -
+ CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just
+ below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR +
+ CONFIG_SYS_GBL_DATA_OFFSET) downward.
Note:
On the MPC824X (or other systems that use the data
cache for initial memory) the address chosen for
- CFG_INIT_RAM_ADDR is basically arbitrary - it must
+ CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must
point to an otherwise UNUSED address space between
the top of RAM and the start of the PCI space.
-- CFG_SIUMCR: SIU Module Configuration (11-6)
+- CONFIG_SYS_SIUMCR: SIU Module Configuration (11-6)
-- CFG_SYPCR: System Protection Control (11-9)
+- CONFIG_SYS_SYPCR: System Protection Control (11-9)
-- CFG_TBSCR: Time Base Status and Control (11-26)
+- CONFIG_SYS_TBSCR: Time Base Status and Control (11-26)
-- CFG_PISCR: Periodic Interrupt Status and Control (11-31)
+- CONFIG_SYS_PISCR: Periodic Interrupt Status and Control (11-31)
-- CFG_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30)
+- CONFIG_SYS_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30)
-- CFG_SCCR: System Clock and reset Control Register (15-27)
+- CONFIG_SYS_SCCR: System Clock and reset Control Register (15-27)
-- CFG_OR_TIMING_SDRAM:
+- CONFIG_SYS_OR_TIMING_SDRAM:
SDRAM timing
-- CFG_MAMR_PTA:
+- CONFIG_SYS_MAMR_PTA:
periodic timer for refresh
-- CFG_DER: Debug Event Register (37-47)
+- CONFIG_SYS_DER: Debug Event Register (37-47)
-- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CFG_REMAP_OR_AM,
- CFG_PRELIM_OR_AM, CFG_OR_TIMING_FLASH, CFG_OR0_REMAP,
- CFG_OR0_PRELIM, CFG_BR0_PRELIM, CFG_OR1_REMAP, CFG_OR1_PRELIM,
- CFG_BR1_PRELIM:
+- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM,
+ CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP,
+ CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM,
+ CONFIG_SYS_BR1_PRELIM:
Memory Controller Definitions: BR0/1 and OR0/1 (FLASH)
- SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE,
- CFG_OR_TIMING_SDRAM, CFG_OR2_PRELIM, CFG_BR2_PRELIM,
- CFG_OR3_PRELIM, CFG_BR3_PRELIM:
+ CONFIG_SYS_OR_TIMING_SDRAM, CONFIG_SYS_OR2_PRELIM, CONFIG_SYS_BR2_PRELIM,
+ CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM:
Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM)
-- CFG_MAMR_PTA, CFG_MPTPR_2BK_4K, CFG_MPTPR_1BK_4K, CFG_MPTPR_2BK_8K,
- CFG_MPTPR_1BK_8K, CFG_MAMR_8COL, CFG_MAMR_9COL:
+- CONFIG_SYS_MAMR_PTA, CONFIG_SYS_MPTPR_2BK_4K, CONFIG_SYS_MPTPR_1BK_4K, CONFIG_SYS_MPTPR_2BK_8K,
+ CONFIG_SYS_MPTPR_1BK_8K, CONFIG_SYS_MAMR_8COL, CONFIG_SYS_MAMR_9COL:
Machine Mode Register and Memory Periodic Timer
Prescaler definitions (SDRAM timing)
-- CFG_I2C_UCODE_PATCH, CFG_I2C_DPMEM_OFFSET [0x1FC0]:
+- CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_I2C_DPMEM_OFFSET [0x1FC0]:
enable I2C microcode relocation patch (MPC8xx);
define relocation offset in DPRAM [DSP2]
-- CFG_SMC_UCODE_PATCH, CFG_SMC_DPMEM_OFFSET [0x1FC0]:
+- CONFIG_SYS_SMC_UCODE_PATCH, CONFIG_SYS_SMC_DPMEM_OFFSET [0x1FC0]:
enable SMC microcode relocation patch (MPC8xx);
define relocation offset in DPRAM [SMC1]
-- CFG_SPI_UCODE_PATCH, CFG_SPI_DPMEM_OFFSET [0x1FC0]:
+- CONFIG_SYS_SPI_UCODE_PATCH, CONFIG_SYS_SPI_DPMEM_OFFSET [0x1FC0]:
enable SPI microcode relocation patch (MPC8xx);
define relocation offset in DPRAM [SCC4]
-- CFG_USE_OSCCLK:
+- CONFIG_SYS_USE_OSCCLK:
Use OSCM clock mode on MBX8xx board. Be careful,
wrong setting might damage your board. Read
doc/README.MBX before setting this variable!
-- CFG_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only)
+- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only)
Offset of the bootmode word in DPRAM used by post
(Power On Self Tests). This definition overrides
#define'd default value in commproc.h resp.
cpm_8260.h.
-- CFG_PCI_SLV_MEM_LOCAL, CFG_PCI_SLV_MEM_BUS, CFG_PICMR0_MASK_ATTRIB,
- CFG_PCI_MSTR0_LOCAL, CFG_PCIMSK0_MASK, CFG_PCI_MSTR1_LOCAL,
- CFG_PCIMSK1_MASK, CFG_PCI_MSTR_MEM_LOCAL, CFG_PCI_MSTR_MEM_BUS,
- CFG_CPU_PCI_MEM_START, CFG_PCI_MSTR_MEM_SIZE, CFG_POCMR0_MASK_ATTRIB,
- CFG_PCI_MSTR_MEMIO_LOCAL, CFG_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START,
- CFG_PCI_MSTR_MEMIO_SIZE, CFG_POCMR1_MASK_ATTRIB, CFG_PCI_MSTR_IO_LOCAL,
- CFG_PCI_MSTR_IO_BUS, CFG_CPU_PCI_IO_START, CFG_PCI_MSTR_IO_SIZE,
- CFG_POCMR2_MASK_ATTRIB: (MPC826x only)
+- CONFIG_SYS_PCI_SLV_MEM_LOCAL, CONFIG_SYS_PCI_SLV_MEM_BUS, CONFIG_SYS_PICMR0_MASK_ATTRIB,
+ CONFIG_SYS_PCI_MSTR0_LOCAL, CONFIG_SYS_PCIMSK0_MASK, CONFIG_SYS_PCI_MSTR1_LOCAL,
+ CONFIG_SYS_PCIMSK1_MASK, CONFIG_SYS_PCI_MSTR_MEM_LOCAL, CONFIG_SYS_PCI_MSTR_MEM_BUS,
+ CONFIG_SYS_CPU_PCI_MEM_START, CONFIG_SYS_PCI_MSTR_MEM_SIZE, CONFIG_SYS_POCMR0_MASK_ATTRIB,
+ CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL, CONFIG_SYS_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START,
+ CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL,
+ CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE,
+ CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only)
Overrides the default PCI memory map in cpu/mpc8260/pci.c if set.
- CONFIG_SPD_EEPROM
@@ -2552,16 +2552,16 @@
SPD_EEPROM_ADDRESS
I2C address of the SPD EEPROM
-- CFG_SPD_BUS_NUM
+- CONFIG_SYS_SPD_BUS_NUM
If SPD EEPROM is on an I2C bus other than the first
one, specify here. Note that the value must resolve
to something your driver can deal with.
-- CFG_83XX_DDR_USES_CS0
+- CONFIG_SYS_83XX_DDR_USES_CS0
Only for 83xx systems. If specified, then DDR should
be configured using CS0 and CS1 instead of CS2 and CS3.
-- CFG_83XX_DDR_USES_CS0
+- CONFIG_SYS_83XX_DDR_USES_CS0
Only for 83xx systems. If specified, then DDR should
be configured using CS0 and CS1 instead of CS2 and CS3.
@@ -2861,7 +2861,7 @@
for use by the bootm command. See also "bootm_size"
environment variable. Address defined by "bootm_low" is
also the base of the initial memory mapping for the Linux
- kernel -- see the description of CFG_BOOTMAPSZ.
+ kernel -- see the description of CONFIG_SYS_BOOTMAPSZ.
bootm_size - Memory range available for image processing in the bootm
command can be restricted. This variable is given as
@@ -2909,7 +2909,7 @@
is usually what you want since it allows for
maximum initrd size. If for some reason you want to
make sure that the initrd image is loaded below the
- CFG_BOOTMAPSZ limit, you can set this environment
+ CONFIG_SYS_BOOTMAPSZ limit, you can set this environment
variable to a value of "no" or "off" or "0".
Alternatively, you can set it to a maximum upper
address to use (U-Boot will still check that it
@@ -3183,7 +3183,7 @@
include/asm-ppc/tqm8xx.h) includes the same definition of the Board
Information structure as we define in include/asm-<arch>/u-boot.h,
and make sure that your definition of IMAP_ADDR uses the same value
-as your U-Boot configuration in CFG_IMMR.
+as your U-Boot configuration in CONFIG_SYS_IMMR.
Configuring the Linux kernel:
@@ -3730,7 +3730,7 @@
cause you grief during the initial boot! It is frequently not
used.
- CFG_INIT_RAM_ADDR should be somewhere that won't interfere
+ CONFIG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere
with your processor/board/system design. The default value
you will find in any recent u-boot distribution in
walnut.h should work for you. I'd set it to a value larger
@@ -3827,7 +3827,7 @@
TQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After
booting and sizing and initializing DRAM, the code relocates itself
to the upper end of DRAM. Immediately below the U-Boot code some
-memory is reserved for use by malloc() [see CFG_MALLOC_LEN
+memory is reserved for use by malloc() [see CONFIG_SYS_MALLOC_LEN
configuration setting]. Below that, a structure with global Board
Info data is placed, followed by the stack (growing downward).
diff --git a/README.nios_CONFIG_SYS_NIOS_CPU b/README.nios_CONFIG_SYS_NIOS_CPU
new file mode 100644
index 0000000..3547c34
--- /dev/null
+++ b/README.nios_CONFIG_SYS_NIOS_CPU
@@ -0,0 +1,140 @@
+
+===============================================================================
+ C F G _ N I O S _ C P U _ * v s . N I O S S D K
+===============================================================================
+
+When ever you have to make a new NIOS CPU configuration you can use this table
+as a reference list to the original NIOS SDK symbols made by Alteras SOPC
+Builder. Look into excalibur.h and excalibur.s in your SDK path cpu_sdk/inc.
+Symbols beginning with a '[ptf]:' are coming from your SOPC sytem description
+(PTF file) in sections WIZARD_SCRIPT_ARGUMENTS or SYSTEM_BUILDER_INFO.
+
+C O R E N I O S S D K [1],[7]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_CLK nasys_clock_freq
+CONFIG_SYS_NIOS_CPU_ICACHE nasys_icache_size
+CONFIG_SYS_NIOS_CPU_DCACHE nasys_dcache_size
+CONFIG_SYS_NIOS_CPU_REG_NUMS nasys_nios_num_regs
+CONFIG_SYS_NIOS_CPU_MUL __nios_use_multiply__
+CONFIG_SYS_NIOS_CPU_MSTEP __nios_use_mstep__
+CONFIG_SYS_NIOS_CPU_STACK nasys_stack_top
+CONFIG_SYS_NIOS_CPU_VEC_BASE nasys_vector_table
+CONFIG_SYS_NIOS_CPU_VEC_SIZE nasys_vector_table_size
+CONFIG_SYS_NIOS_CPU_VEC_NUMS
+CONFIG_SYS_NIOS_CPU_RST_VECT nasys_reset_address
+CONFIG_SYS_NIOS_CPU_DBG_CORE nasys_debug_core
+CONFIG_SYS_NIOS_CPU_RAM_BASE na_onchip_ram_64_kbytes
+CONFIG_SYS_NIOS_CPU_RAM_SIZE na_onchip_ram_64_kbytes_size
+CONFIG_SYS_NIOS_CPU_ROM_BASE na_boot_monitor_rom
+CONFIG_SYS_NIOS_CPU_ROM_SIZE na_boot_monitor_rom_size
+CONFIG_SYS_NIOS_CPU_OCI_BASE nasys_oci_core
+CONFIG_SYS_NIOS_CPU_OCI_SIZE
+CONFIG_SYS_NIOS_CPU_SRAM_BASE na_ext_ram nasys_program_mem
+ nasys_data_mem
+CONFIG_SYS_NIOS_CPU_SRAM_SIZE na_ext_ram_size nasys_program_mem_size
+ nasys_data_mem_size
+CONFIG_SYS_NIOS_CPU_SDRAM_BASE na_sdram
+CONFIG_SYS_NIOS_CPU_SDRAM_SIZE na_sdram_size
+CONFIG_SYS_NIOS_CPU_FLASH_BASE na_ext_flash nasys_main_flash
+ nasys_am29lv065d_flash_0
+ nasys_flash_0
+CONFIG_SYS_NIOS_CPU_FLASH_SIZE na_ext_flash_size nasys_main_flash_size
+
+T I M E R N I O S S D K [3]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_TIMER_NUMS nasys_timer_count
+CONFIG_SYS_NIOS_CPU_TIMER[0-9] nasys_timer_[0-9]
+CONFIG_SYS_NIOS_CPU_TIMER[0-9]_IRQ nasys_timer_[0-9]_irq
+CONFIG_SYS_NIOS_CPU_TIMER[0-9]_PER [ptf]:period
+ [ptf]:period_units
+ [ptf]:mult
+CONFIG_SYS_NIOS_CPU_TIMER[0-9]_AR [ptf]:always_run
+CONFIG_SYS_NIOS_CPU_TIMER[0-9]_FP [ptf]:fixed_period
+CONFIG_SYS_NIOS_CPU_TIMER[0-9]_SS [ptf]:snapshot
+
+U A R T N I O S S D K [2]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_UART_NUMS nasys_uart_count
+CONFIG_SYS_NIOS_CPU_UART[0-9] nasys_uart_[0-9]
+CONFIG_SYS_NIOS_CPU_UART[0-9]_IRQ nasys_uart_[0-9]_irq
+CONFIG_SYS_NIOS_CPU_UART[0-9]_BR [ptf]:baud
+CONFIG_SYS_NIOS_CPU_UART[0-9]_DB [ptf]:data_bits
+CONFIG_SYS_NIOS_CPU_UART[0-9]_SB [ptf]:stop_bits
+CONFIG_SYS_NIOS_CPU_UART[0-9]_PA [ptf]:parity
+CONFIG_SYS_NIOS_CPU_UART[0-9]_HS [ptf]:use_cts_rts
+CONFIG_SYS_NIOS_CPU_UART[0-9]_EOP [ptf]:use_eop_register
+
+P I O N I O S S D K [4]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_PIO_NUMS nasys_pio_count
+CONFIG_SYS_NIOS_CPU_PIO[0-9] nasys_pio_[0-9]
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_IRQ nasys_pio_[0-9]_irq
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_BITS [ptf]:Data_Width
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_TYPE [ptf]:has_tri
+ [ptf]:has_out
+ [ptf]:has_in
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_CAP [ptf]:capture
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_EDGE [ptf]:edge_type
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_ITYPE [ptf]:irq_type
+
+S P I N I O S S D K [6]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_SPI_NUMS nasys_spi_count
+CONFIG_SYS_NIOS_CPU_SPI[0-9] nasys_spi_[0-9]
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_IRQ nasys_spi_[0-9]_irq
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_BITS [ptf]:databits
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_MA [ptf]:ismaster
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_SLN [ptf]:numslaves
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_TCLK [ptf]:targetclock
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_TDELAY [ptf]:targetdelay
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_* [ptf]:*
+
+I D E N I O S S D K
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_IDE_NUMS nasys_usersocket_count
+CONFIG_SYS_NIOS_CPU_IDE[0-9] nasys_usersocket_[0-9]
+
+A S M I N I O S S D K [5]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_ASMI_NUMS nasys_asmi_count
+CONFIG_SYS_NIOS_CPU_ASMI[0-9] nasys_asmi_[0-9]
+CONFIG_SYS_NIOS_CPU_ASMI[0-9]_IRQ nasys_asmi_[0-9]_irq
+
+E t h e r n e t ( L A N ) N I O S S D K
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_LAN_NUMS
+CONFIG_SYS_NIOS_CPU_LAN[0-9]_BASE na_lan91c111
+CONFIG_SYS_NIOS_CPU_LAN[0-9]_OFFS LAN91C111_REGISTERS_OFFSET
+CONFIG_SYS_NIOS_CPU_LAN[0-9]_IRQ na_lan91c111_irq
+CONFIG_SYS_NIOS_CPU_LAN[0-9]_BUSW LAN91C111_DATA_BUS_WIDTH
+CONFIG_SYS_NIOS_CPU_LAN[0-9]_TYPE
+
+s y s t e m c o m p o s i n g N I O S S D K
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_TICK_TIMER (na_low_priority_timer2)
+CONFIG_SYS_NIOS_CPU_USER_TIMER (na_timer1)
+CONFIG_SYS_NIOS_CPU_BUTTON_PIO (na_button_pio)
+CONFIG_SYS_NIOS_CPU_LCD_PIO (na_lcd_pio)
+CONFIG_SYS_NIOS_CPU_LED_PIO (na_led_pio)
+CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO (na_seven_seg_pio)
+CONFIG_SYS_NIOS_CPU_RECONF_PIO (na_reconfig_request_pio)
+CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO (na_cf_present_pio)
+CONFIG_SYS_NIOS_CPU_CFPOWER_PIO (na_cf_power_pio)
+CONFIG_SYS_NIOS_CPU_CFATASEL_PIO (na_cf_ata_select_pio)
+CONFIG_SYS_NIOS_CPU_USER_SPI (na_spi)
+
+
+===============================================================================
+ R E F E R E N C E S
+===============================================================================
+[1] http://www.altera.com/literature/ds/ds_nioscpu.pdf
+[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
+[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
+[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
+[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf
+[6] http://www.altera.com/literature/ds/ds_nios_spi.pdf
+[7] http://www.altera.com/literature/ds/ds_legacy_sdram_ctrl.pdf
+
+
+===============================================================================
+Stephan Linz <linz@li-pro.net>
diff --git a/api/api_storage.c b/api/api_storage.c
index 5642dd3..6fac98b 100644
--- a/api/api_storage.c
+++ b/api/api_storage.c
@@ -67,28 +67,28 @@
void dev_stor_init(void)
{
#if defined(CONFIG_CMD_IDE)
- specs[ENUM_IDE].max_dev = CFG_IDE_MAXDEVICE;
+ specs[ENUM_IDE].max_dev = CONFIG_SYS_IDE_MAXDEVICE;
specs[ENUM_IDE].enum_started = 0;
specs[ENUM_IDE].enum_ended = 0;
specs[ENUM_IDE].type = DEV_TYP_STOR | DT_STOR_IDE;
specs[ENUM_IDE].name = "ide";
#endif
#if defined(CONFIG_CMD_MMC)
- specs[ENUM_MMC].max_dev = CFG_MMC_MAX_DEVICE;
+ specs[ENUM_MMC].max_dev = CONFIG_SYS_MMC_MAX_DEVICE;
specs[ENUM_MMC].enum_started = 0;
specs[ENUM_MMC].enum_ended = 0;
specs[ENUM_MMC].type = DEV_TYP_STOR | DT_STOR_MMC;
specs[ENUM_MMC].name = "mmc";
#endif
#if defined(CONFIG_CMD_SATA)
- specs[ENUM_SATA].max_dev = CFG_SATA_MAX_DEVICE;
+ specs[ENUM_SATA].max_dev = CONFIG_SYS_SATA_MAX_DEVICE;
specs[ENUM_SATA].enum_started = 0;
specs[ENUM_SATA].enum_ended = 0;
specs[ENUM_SATA].type = DEV_TYP_STOR | DT_STOR_SATA;
specs[ENUM_SATA].name = "sata";
#endif
#if defined(CONFIG_CMD_SCSI)
- specs[ENUM_SCSI].max_dev = CFG_SCSI_MAX_DEVICE;
+ specs[ENUM_SCSI].max_dev = CONFIG_SYS_SCSI_MAX_DEVICE;
specs[ENUM_SCSI].enum_started = 0;
specs[ENUM_SCSI].enum_ended = 0;
specs[ENUM_SCSI].type = DEV_TYP_STOR | DT_STOR_SCSI;
diff --git a/board/AtmarkTechno/suzaku/flash.c b/board/AtmarkTechno/suzaku/flash.c
index 49a0673..ce6fae0 100644
--- a/board/AtmarkTechno/suzaku/flash.c
+++ b/board/AtmarkTechno/suzaku/flash.c
@@ -24,7 +24,7 @@
#include <common.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
unsigned long flash_init(void)
{
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
index 39c97b1..d509a8f 100644
--- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -32,7 +32,7 @@
int checkboard (void)
{
puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
-#if (TEXT_BASE == CFG_INT_FLASH_BASE)
+#if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
puts (" Boot from Internal FLASH\n");
#endif
@@ -45,10 +45,10 @@
size = 0;
MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6
- | MCFSDRAMC_DCR_RC ((15 * CFG_CLK) >> 4);
-#ifdef CFG_SDRAM_BASE0
+ | MCFSDRAMC_DCR_RC ((15 * CONFIG_SYS_CLK) >> 4);
+#ifdef CONFIG_SYS_SDRAM_BASE0
- MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE0)
+ MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE0)
| MCFSDRAMC_DACR_CASL (1)
| MCFSDRAMC_DACR_CBM (3)
| MCFSDRAMC_DACR_PS_16;
@@ -57,17 +57,17 @@
MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
- *(unsigned short *) (CFG_SDRAM_BASE0) = 0xA5A5;
+ *(unsigned short *) (CONFIG_SYS_SDRAM_BASE0) = 0xA5A5;
MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
for (i = 0; i < 2000; i++)
asm (" nop");
mbar_writeLong (MCFSDRAMC_DACR0,
mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS);
- *(unsigned int *) (CFG_SDRAM_BASE0 + 0x220) = 0xA5A5;
- size += CFG_SDRAM_SIZE * 1024 * 1024;
+ *(unsigned int *) (CONFIG_SYS_SDRAM_BASE0 + 0x220) = 0xA5A5;
+ size += CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
#endif
-#ifdef CFG_SDRAM_BASE1
- MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE1)
+#ifdef CONFIG_SYS_SDRAM_BASE1
+ MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE1)
| MCFSDRAMC_DACR_CASL (1)
| MCFSDRAMC_DACR_CBM (3)
| MCFSDRAMC_DACR_PS_16;
@@ -76,25 +76,25 @@
MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP;
- *(unsigned short *) (CFG_SDRAM_BASE1) = 0xA5A5;
+ *(unsigned short *) (CONFIG_SYS_SDRAM_BASE1) = 0xA5A5;
MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE;
for (i = 0; i < 2000; i++)
asm (" nop");
MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS;
- *(unsigned int *) (CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
- size += CFG_SDRAM_SIZE1 * 1024 * 1024;
+ *(unsigned int *) (CONFIG_SYS_SDRAM_BASE1 + 0x220) = 0xA5A5;
+ size += CONFIG_SYS_SDRAM_SIZE1 * 1024 * 1024;
#endif
return size;
}
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
int testdram (void)
{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+ uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
uint *p;
printf("SDRAM test phase 1:\n");
diff --git a/board/BuS/EB+MCF-EV123/VCxK.c b/board/BuS/EB+MCF-EV123/VCxK.c
index 4b46b7c..f2fe353 100644
--- a/board/BuS/EB+MCF-EV123/VCxK.c
+++ b/board/BuS/EB+MCF-EV123/VCxK.c
@@ -25,7 +25,7 @@
#include <asm/m5282.h>
#include "VCxK.h"
-vu_char *vcxk_bws = (vu_char *)(CFG_CS3_BASE);
+vu_char *vcxk_bws = (vu_char *)(CONFIG_SYS_CS3_BASE);
#define VCXK_BWS vcxk_bws
static ulong vcxk_driver;
diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.c b/board/BuS/EB+MCF-EV123/cfm_flash.c
index 98e563f..fe03b17 100644
--- a/board/BuS/EB+MCF-EV123/cfm_flash.c
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.c
@@ -28,14 +28,14 @@
#if defined(CONFIG_M5281) || defined(CONFIG_M5282)
-#if (CFG_CLK>20000000)
- #define CFM_CLK (((long) CFG_CLK / (400000 * 8) + 1) | 0x40)
+#if (CONFIG_SYS_CLK>20000000)
+ #define CFM_CLK (((long) CONFIG_SYS_CLK / (400000 * 8) + 1) | 0x40)
#else
- #define CFM_CLK ((long) CFG_CLK / 400000 + 1)
+ #define CFM_CLK ((long) CONFIG_SYS_CLK / 400000 + 1)
#endif
#define cmf_backdoor_address(addr) (((addr) & 0x0007FFFF) | 0x04000000 | \
- (CFG_MBAR & 0xC0000000))
+ (CONFIG_SYS_MBAR & 0xC0000000))
void cfm_flash_print_info (flash_info_t * info)
{
@@ -60,8 +60,8 @@
MCFCFM_MCR = 0;
MCFCFM_CLKD = CFM_CLK;
debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
- CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
- CFG_CLK);
+ CONFIG_SYS_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
+ CONFIG_SYS_CLK);
MCFCFM_SACC = 0;
MCFCFM_DACC = 0;
@@ -86,7 +86,7 @@
{
if (sector == 0)
{
- info->start[sector] = CFG_INT_FLASH_BASE;
+ info->start[sector] = CONFIG_SYS_INT_FLASH_BASE;
}
else
{
@@ -187,7 +187,7 @@
return rc;
}
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
int cfm_flash_protect(flash_info_t * info,long sector,int prot)
{
diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.h b/board/BuS/EB+MCF-EV123/cfm_flash.h
index cc8cdbd..ed4e794 100644
--- a/board/BuS/EB+MCF-EV123/cfm_flash.h
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.h
@@ -33,7 +33,7 @@
extern int cfm_flash_erase_sector (flash_info_t * info, int sector);
extern void cfm_flash_init (flash_info_t * info);
extern int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
extern int cfm_flash_protect(flash_info_t * info,long sector,int prot);
#endif
diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c
index c2a1b6f..3c36367 100644
--- a/board/BuS/EB+MCF-EV123/flash.c
+++ b/board/BuS/EB+MCF-EV123/flash.c
@@ -27,10 +27,10 @@
#include <common.h>
#include "cfm_flash.h"
-#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
#define FLASH_BANK_SIZE 0x200000
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
void flash_print_info (flash_info_t * info)
{
@@ -83,7 +83,7 @@
int i, j;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
switch (i)
@@ -93,8 +93,8 @@
(AMD_MANUFACT & FLASH_VENDMASK) |
(AMD_ID_LV160B & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
flashbase = PHYS_FLASH_1;
for (j = 0; j < flash_info[i].sector_count; j++) {
if (j == 0) {
@@ -128,8 +128,8 @@
}
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + 0xffff, &flash_info[0]);
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]);
return size;
}
@@ -177,7 +177,7 @@
result = *addr;
/* check timeout */
- if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
state = ERR_TIMOUT;
}
@@ -303,7 +303,7 @@
result = *addr;
/* check timeout */
- if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
state = ERR_TIMOUT;
}
if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
@@ -390,7 +390,7 @@
return rc;
}
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
int flash_real_protect(flash_info_t * info,long sector,int prot)
{
diff --git a/board/BuS/EB+MCF-EV123/mii.c b/board/BuS/EB+MCF-EV123/mii.c
index 8ae2ec6..7f92514 100644
--- a/board/BuS/EB+MCF-EV123/mii.c
+++ b/board/BuS/EB+MCF-EV123/mii.c
@@ -38,15 +38,15 @@
{
if (setclear) {
MCFGPIO_PASPAR |= 0x0F00;
- MCFGPIO_PEHLPAR = CFG_PEHLPAR;
+ MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
} else {
MCFGPIO_PASPAR &= 0xF0FF;
- MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR;
+ MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR;
}
return 0;
}
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
#include <miiphy.h>
/* Make MII read/write commands for the FEC. */
@@ -132,9 +132,9 @@
return (mii_reply & 0xffff); /* data read from phy */
}
-#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
+#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-#if defined(CFG_DISCOVER_PHY)
+#if defined(CONFIG_SYS_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)
{
#define MAX_PHY_PASSES 11
@@ -199,7 +199,7 @@
return phyaddr;
}
-#endif /* CFG_DISCOVER_PHY */
+#endif /* CONFIG_SYS_DISCOVER_PHY */
void mii_init(void) __attribute__((weak,alias("__mii_init")));
diff --git a/board/LEOX/elpt860/elpt860.c b/board/LEOX/elpt860/elpt860.c
index 5f50631..905df92 100644
--- a/board/LEOX/elpt860/elpt860.c
+++ b/board/LEOX/elpt860/elpt860.c
@@ -138,23 +138,23 @@
/* ------------------------------------------------------------------------- */
-#define CFG_PC4 0x0800
+#define CONFIG_SYS_PC4 0x0800
-#define CFG_DS1 CFG_PC4
+#define CONFIG_SYS_DS1 CONFIG_SYS_PC4
/*
* Very early board init code (fpga boot, etc.)
*/
int board_early_init_f (void)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
/*
* Light up the red led on ELPT860 pcb (DS1) (PCDAT)
*/
- immr->im_ioport.iop_pcdat &= ~CFG_DS1; /* PCDAT (DS1 = 0) */
- immr->im_ioport.iop_pcpar &= ~CFG_DS1; /* PCPAR (0=general purpose I/O) */
- immr->im_ioport.iop_pcdir |= CFG_DS1; /* PCDIR (I/O: 0=input, 1=output) */
+ immr->im_ioport.iop_pcdat &= ~CONFIG_SYS_DS1; /* PCDAT (DS1 = 0) */
+ immr->im_ioport.iop_pcpar &= ~CONFIG_SYS_DS1; /* PCPAR (0=general purpose I/O) */
+ immr->im_ioport.iop_pcdir |= CONFIG_SYS_DS1; /* PCDIR (I/O: 0=input, 1=output) */
return (0); /* success */
}
@@ -181,7 +181,7 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size8, size9;
long int size_b0 = 0;
@@ -207,7 +207,7 @@
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
- memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
/*
* The following value is used as an address (i.e. opcode) for
@@ -229,10 +229,10 @@
* preliminary addresses - these have to be modified after the
* SDRAM size has been determined.
*/
- memctl->memc_or1 = CFG_OR1_PRELIM;
- memctl->memc_br1 = CFG_BR1_PRELIM;
+ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
- memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
@@ -252,7 +252,7 @@
*
* try 8 column mode
*/
- size8 = dram_size (CFG_MAMR_8COL,
+ size8 = dram_size (CONFIG_SYS_MAMR_8COL,
SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
udelay (1000);
@@ -260,7 +260,7 @@
/*
* try 9 column mode
*/
- size9 = dram_size (CFG_MAMR_9COL,
+ size9 = dram_size (CONFIG_SYS_MAMR_9COL,
SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
if (size8 < size9) { /* leave configuration at 9 columns */
@@ -269,7 +269,7 @@
} else { /* back to 8 columns */
size_b0 = size8;
- memctl->memc_mamr = CFG_MAMR_8COL;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
udelay (500);
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
}
@@ -282,22 +282,22 @@
*/
if (size_b0 < 0x02000000) {
/* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
udelay (1000);
}
/*
* Final mapping: map bigger bank first
*/
- memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
- memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+ memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+ memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
{
unsigned long reg;
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
}
@@ -319,7 +319,7 @@
static long int
dram_size (long int mamr_value, long int *base, long int maxsize)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
@@ -329,20 +329,20 @@
/* ------------------------------------------------------------------------- */
-#define CFG_PA1 0x4000
-#define CFG_PA2 0x2000
+#define CONFIG_SYS_PA1 0x4000
+#define CONFIG_SYS_PA2 0x2000
-#define CFG_LBKs (CFG_PA2 | CFG_PA1)
+#define CONFIG_SYS_LBKs (CONFIG_SYS_PA2 | CONFIG_SYS_PA1)
void reset_phy (void)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
/*
* Ensure LBK LXT901 ethernet 1 & 2 = 0 ... for normal loopback in effect
* and no AUI loopback
*/
- immr->im_ioport.iop_padat &= ~CFG_LBKs; /* PADAT (LBK eth 1&2 = 0) */
- immr->im_ioport.iop_papar &= ~CFG_LBKs; /* PAPAR (0=general purpose I/O) */
- immr->im_ioport.iop_padir |= CFG_LBKs; /* PADIR (I/O: 0=input, 1=output) */
+ immr->im_ioport.iop_padat &= ~CONFIG_SYS_LBKs; /* PADAT (LBK eth 1&2 = 0) */
+ immr->im_ioport.iop_papar &= ~CONFIG_SYS_LBKs; /* PAPAR (0=general purpose I/O) */
+ immr->im_ioport.iop_padir |= CONFIG_SYS_LBKs; /* PADIR (I/O: 0=input, 1=output) */
}
diff --git a/board/LEOX/elpt860/flash.c b/board/LEOX/elpt860/flash.c
index 668aee2..9a75aad 100644
--- a/board/LEOX/elpt860/flash.c
+++ b/board/LEOX/elpt860/flash.c
@@ -33,7 +33,7 @@
/*
** Note 1: In this file, you have to provide the following variable:
** ------
-** flash_info_t flash_info[CFG_MAX_FLASH_BANKS]
+** flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]
** 'flash_info_t' structure is defined into 'include/flash.h'
** and defined as extern into 'common/cmd_flash.c'
**
@@ -62,10 +62,10 @@
#ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
#endif
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Internal Functions
@@ -82,13 +82,13 @@
unsigned long
flash_init (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long size_b0;
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
{
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -105,20 +105,20 @@
}
/* Remap FLASH according to real size */
- memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
- memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V;
+ memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+ memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V;
/* Re-do sizing to get full correct info */
- size_b0 = flash_get_size ((volatile unsigned char *)CFG_FLASH_BASE,
+ size_b0 = flash_get_size ((volatile unsigned char *)CONFIG_SYS_FLASH_BASE,
&flash_info[0]);
- flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+ flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len-1,
&flash_info[0]);
#endif
@@ -383,7 +383,7 @@
addr = (volatile unsigned char *)(info->start[l_sect]);
while ( (addr[0] & 0x80) != 0x80 )
{
- if ( (now = get_timer(start)) > CFG_FLASH_ERASE_TOUT )
+ if ( (now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT )
{
printf ("Timeout\n");
return ( 1 );
@@ -556,7 +556,7 @@
start = get_timer (0);
while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) )
{
- if ( get_timer(start) > CFG_FLASH_WRITE_TOUT )
+ if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT )
{
return (1);
}
@@ -602,7 +602,7 @@
start = get_timer (0);
while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) )
{
- if ( get_timer(start) > CFG_FLASH_WRITE_TOUT )
+ if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT )
{
return (1);
}
diff --git a/board/MAI/AmigaOneG3SE/cmd_boota.c b/board/MAI/AmigaOneG3SE/cmd_boota.c
index 40c951d..949af18 100644
--- a/board/MAI/AmigaOneG3SE/cmd_boota.c
+++ b/board/MAI/AmigaOneG3SE/cmd_boota.c
@@ -27,7 +27,7 @@
int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- unsigned char *load_address = (unsigned char *) CFG_LOAD_ADDR;
+ unsigned char *load_address = (unsigned char *) CONFIG_SYS_LOAD_ADDR;
unsigned char *base_address;
unsigned long offset;
diff --git a/board/MAI/AmigaOneG3SE/flash.c b/board/MAI/AmigaOneG3SE/flash.c
index 409b955..a96d5ba 100644
--- a/board/MAI/AmigaOneG3SE/flash.c
+++ b/board/MAI/AmigaOneG3SE/flash.c
@@ -1,14 +1,14 @@
#include <common.h>
#include <flash.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
unsigned long flash_init(void)
{
int i;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
{
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = 0;
diff --git a/board/MAI/AmigaOneG3SE/flash_new.c b/board/MAI/AmigaOneG3SE/flash_new.c
index 3efee7e..7b7ea16 100644
--- a/board/MAI/AmigaOneG3SE/flash_new.c
+++ b/board/MAI/AmigaOneG3SE/flash_new.c
@@ -39,7 +39,7 @@
#endif
/*---------------------------------------------------------------------*/
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
static ulong flash_get_size (ulong addr, flash_info_t *info);
static int flash_get_offsets (ulong base, flash_info_t *info);
@@ -80,7 +80,7 @@
{
int i;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
{
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = 0;
@@ -101,25 +101,25 @@
flash_to_xd();
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = 0;
flash_info[i].size = 0;
}
- DEBUGF("\n## Get flash size @ 0x%08x\n", CFG_FLASH_BASE);
+ DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE);
- flash_size = flash_get_size (CFG_FLASH_BASE, flash_info);
+ flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info);
DEBUGF("## Flash bank size: %08lx\n", flash_size);
if (flash_size) {
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE && \
- CFG_MONITOR_BASE < CFG_FLASH_BASE + CFG_FLASH_MAX_SIZE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \
+ CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[0]);
#endif
@@ -286,10 +286,10 @@
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
if (! flash_get_offsets (addr, info)) {
@@ -418,10 +418,10 @@
last = start;
addr = info->start[l_sect];
- DEBUGF ("Start erase timeout: %d\n", CFG_FLASH_ERASE_TOUT);
+ DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT);
while ((in8(addr) & 0x80) != 0x80) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
flash_reset (info->start[0]);
flash_to_mem();
@@ -562,7 +562,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
flash_reset (addr);
flash_to_mem();
return (1);
diff --git a/board/MAI/AmigaOneG3SE/i8259.h b/board/MAI/AmigaOneG3SE/i8259.h
index 05c4052..eb08e13 100644
--- a/board/MAI/AmigaOneG3SE/i8259.h
+++ b/board/MAI/AmigaOneG3SE/i8259.h
@@ -21,20 +21,20 @@
* MA 02111-1307 USA
*/
-#define ICW1_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW1
-#define ICW1_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW1
-#define ICW2_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW2
-#define ICW2_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW2
-#define ICW3_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW3
-#define ICW3_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW3
-#define ICW4_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW4
-#define ICW4_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW4
-#define OCW1_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW1
-#define OCW1_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW1
-#define OCW2_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW2
-#define OCW2_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW2
-#define OCW3_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW3
-#define OCW3_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW3
+#define ICW1_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW1
+#define ICW1_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW1
+#define ICW2_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW2
+#define ICW2_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW2
+#define ICW3_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW3
+#define ICW3_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW3
+#define ICW4_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW4
+#define ICW4_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW4
+#define OCW1_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW1
+#define OCW1_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW1
+#define OCW2_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW2
+#define OCW2_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW2
+#define OCW3_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW3
+#define OCW3_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW3
#define IMR_1 OCW1_1
#define IMR_2 OCW1_2
diff --git a/board/MAI/AmigaOneG3SE/interrupts.c b/board/MAI/AmigaOneG3SE/interrupts.c
index 86b4415..de46d6e 100644
--- a/board/MAI/AmigaOneG3SE/interrupts.c
+++ b/board/MAI/AmigaOneG3SE/interrupts.c
@@ -119,12 +119,12 @@
#ifdef DEBUG
puts("interrupt_init: setting decrementer_count\n");
#endif
- decrementer_count = get_tbclk() / CFG_HZ;
+ decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
#ifdef DEBUG
puts("interrupt_init: setting actual decremter\n");
#endif
- set_dec (get_tbclk() / CFG_HZ);
+ set_dec (get_tbclk() / CONFIG_SYS_HZ);
#ifdef DEBUG
puts("interrupt_init: clearing external interrupt table\n");
diff --git a/board/MAI/AmigaOneG3SE/ps2kbd.c b/board/MAI/AmigaOneG3SE/ps2kbd.c
index 724a44d..a297005 100644
--- a/board/MAI/AmigaOneG3SE/ps2kbd.c
+++ b/board/MAI/AmigaOneG3SE/ps2kbd.c
@@ -214,7 +214,7 @@
}
}
-#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
extern int overwrite_console (void);
#else
int overwrite_console (void)
@@ -492,22 +492,22 @@
*/
unsigned char kbd_read_status(void)
{
- return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
+ return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
}
unsigned char kbd_read_input(void)
{
- return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
+ return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
}
void kbd_write_command(unsigned char cmd)
{
- out8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
+ out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
}
void kbd_write_output(unsigned char data)
{
- out8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
+ out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
}
int kbd_read_data(void)
diff --git a/board/MAI/AmigaOneG3SE/serial.c b/board/MAI/AmigaOneG3SE/serial.c
index b6f57c7..88039f3 100644
--- a/board/MAI/AmigaOneG3SE/serial.c
+++ b/board/MAI/AmigaOneG3SE/serial.c
@@ -6,7 +6,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CFG_NS16550
+#ifndef CONFIG_SYS_NS16550
static uint32 ComPort1;
uint16 SerialEcho = 1;
@@ -147,8 +147,8 @@
#else
-const NS16550_t Com0 = (NS16550_t) CFG_NS16550_COM1;
-const NS16550_t Com1 = (NS16550_t) CFG_NS16550_COM2;
+const NS16550_t Com0 = (NS16550_t) CONFIG_SYS_NS16550_COM1;
+const NS16550_t Com1 = (NS16550_t) CONFIG_SYS_NS16550_COM2;
int serial_init (void)
{
diff --git a/board/MAI/AmigaOneG3SE/usb_uhci.c b/board/MAI/AmigaOneG3SE/usb_uhci.c
index 26cdcdf..6d1133f 100644
--- a/board/MAI/AmigaOneG3SE/usb_uhci.c
+++ b/board/MAI/AmigaOneG3SE/usb_uhci.c
@@ -627,7 +627,7 @@
pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr);
USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr);
usb_base_addr&=0xFFFFFFF0;
- usb_base_addr+=CFG_ISA_IO_BASE_ADDRESS;
+ usb_base_addr+=CONFIG_SYS_ISA_IO_BASE_ADDRESS;
rh.devnum = 0;
usb_init_skel();
reset_hc();
diff --git a/board/Marvell/common/flash.c b/board/Marvell/common/flash.c
index 3603372..21eae0e 100644
--- a/board/Marvell/common/flash.c
+++ b/board/Marvell/common/flash.c
@@ -48,7 +48,7 @@
int flash_erase_intel (flash_info_t * info, int s_first, int s_last);
int write_word_intel (bank_addr_t addr, bank_word_t value);
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -68,14 +68,14 @@
unsigned long base, flash_size;
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* the boot flash */
- base = CFG_FLASH_BASE;
+ base = CONFIG_SYS_FLASH_BASE;
size_b0 =
- flash_get_size (CFG_BOOT_FLASH_WIDTH, (vu_long *) base,
+ flash_get_size (CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *) base,
&flash_info[0]);
printf ("[%ldkB@%lx] ", size_b0 / 1024, base);
@@ -84,11 +84,11 @@
printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b0, size_b0 << 20);
}
- base = memoryGetDeviceBaseAddress (CFG_EXTRA_FLASH_DEVICE);
+ base = memoryGetDeviceBaseAddress (CONFIG_SYS_EXTRA_FLASH_DEVICE);
/* base = memoryGetDeviceBaseAddress(DEV_CS3_BASE_ADDR);*/
- for (i = 1; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 1; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
unsigned long size =
- flash_get_size (CFG_EXTRA_FLASH_WIDTH,
+ flash_get_size (CONFIG_SYS_EXTRA_FLASH_WIDTH,
(vu_long *) base, &flash_info[i]);
printf ("[%ldMB@%lx] ", size >> 20, base);
@@ -617,7 +617,7 @@
/* has the timeout limit been reached? */
if (get_timer (start)
>
- CFG_FLASH_ERASE_TOUT)
+ CONFIG_SYS_FLASH_ERASE_TOUT)
{
/* timeout limit reached */
printf ("Time out limit reached erasing sector at address %08lx\n", info->start[sect]);
@@ -776,7 +776,7 @@
addr = (volatile unsigned char *) (info->start[l_sect]);
/* broken for 2x16: TODO */
while ((addr[0] & 0x80) != 0x80) {
- if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -956,7 +956,7 @@
{
/* has the timeout limit been reached? */
if (get_timer (start) >
- CFG_FLASH_WRITE_TOUT) {
+ CONFIG_SYS_FLASH_WRITE_TOUT) {
/* timeout limit reached */
printf ("Time out limit reached programming address %08lx with data %08lx\n", dest, data);
/* reset the flash */
@@ -1064,7 +1064,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((*((vu_long *) dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/Marvell/common/i2c.c b/board/Marvell/common/i2c.c
index 32b2b30..d426044 100644
--- a/board/Marvell/common/i2c.c
+++ b/board/Marvell/common/i2c.c
@@ -48,7 +48,7 @@
unsigned int actualN = 0, actualM = 0;
unsigned int control, status;
unsigned int minMargin = 0xffffffff;
- unsigned int tclk = CFG_TCLK;
+ unsigned int tclk = CONFIG_SYS_TCLK;
unsigned int i2cFreq = speed; /* 100000 max. Fast mode not supported */
DP (puts ("i2c_init\n"));
@@ -372,7 +372,7 @@
int len)
{
uchar status = 0;
- unsigned int i2cFreq = CFG_I2C_SPEED;
+ unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
DP (puts ("i2c_read\n"));
@@ -447,7 +447,7 @@
int len)
{
uchar status = 0;
- unsigned int i2cFreq = CFG_I2C_SPEED;
+ unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
DP (puts ("i2c_write\n"));
@@ -500,7 +500,7 @@
unsigned int i2c_status;
#endif
uchar status = 0;
- unsigned int i2cFreq = CFG_I2C_SPEED;
+ unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
DP (puts ("i2c_probe\n"));
diff --git a/board/Marvell/common/intel_flash.c b/board/Marvell/common/intel_flash.c
index d26f883..42b3ee1 100644
--- a/board/Marvell/common/intel_flash.c
+++ b/board/Marvell/common/intel_flash.c
@@ -152,7 +152,7 @@
/* data polling for D7 */
start = get_timer (0);
do {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
retval = 1;
goto done;
}
@@ -227,7 +227,7 @@
do {
now = get_timer (start);
- if (now - estart > CFG_FLASH_ERASE_TOUT) {
+ if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout (sect %d)\n", sect);
haderr = 1;
break;
diff --git a/board/Marvell/common/intel_flash.h b/board/Marvell/common/intel_flash.h
index 666a4cd..bd8941e 100644
--- a/board/Marvell/common/intel_flash.h
+++ b/board/Marvell/common/intel_flash.h
@@ -68,7 +68,7 @@
/* ID and Lock Configuration */
#define CHIP_RD_ID_LOCK 0x01 /* Bit 0 of each byte */
#define CHIP_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */
-#define CHIP_RD_ID_DEV CFG_FLASH_ID
+#define CHIP_RD_ID_DEV CONFIG_SYS_FLASH_ID
/* dimensions */
#define CHIP_WIDTH 2 /* chips are in 16 bit mode */
diff --git a/board/Marvell/common/misc.S b/board/Marvell/common/misc.S
index 41c3a95..b3a0898 100644
--- a/board/Marvell/common/misc.S
+++ b/board/Marvell/common/misc.S
@@ -16,7 +16,7 @@
board_relocate_rom:
mflr r7
/* update the location of the GT registers */
- lis r11, CFG_GT_REGS@h
+ lis r11, CONFIG_SYS_GT_REGS@h
/* if we're using ECC, we must use the DMA engine to copy ourselves */
bl start_idma_transfer_0
bl wait_for_idma_0
@@ -29,12 +29,12 @@
board_init_ecc:
mflr r7
/* NOTE: r10 still contains the location we've been relocated to
- * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+ * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */
/* now that we're running from ram, init the rest of main memory
* for ECC use */
- lis r8, CFG_MONITOR_LEN@h
- ori r8, r8, CFG_MONITOR_LEN@l
+ lis r8, CONFIG_SYS_MONITOR_LEN@h
+ ori r8, r8, CONFIG_SYS_MONITOR_LEN@l
divw r3, r10, r8
@@ -120,15 +120,15 @@
blr
#endif
-#ifdef CFG_BOARD_ASM_INIT
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
/* NOTE: trashes r3-r7 */
.globl board_asm_init
board_asm_init:
/* just move the GT registers to where they belong */
- lis r3, CFG_DFL_GT_REGS@h
- ori r3, r3, CFG_DFL_GT_REGS@l
- lis r4, CFG_GT_REGS@h
- ori r4, r4, CFG_GT_REGS@l
+ lis r3, CONFIG_SYS_DFL_GT_REGS@h
+ ori r3, r3, CONFIG_SYS_DFL_GT_REGS@l
+ lis r4, CONFIG_SYS_GT_REGS@h
+ ori r4, r4, CONFIG_SYS_GT_REGS@l
li r5, INTERNAL_SPACE_DECODE
/* test to see if we've already moved */
diff --git a/board/Marvell/common/ns16550.c b/board/Marvell/common/ns16550.c
index 475445b..7fbf28a 100644
--- a/board/Marvell/common/ns16550.c
+++ b/board/Marvell/common/ns16550.c
@@ -1,7 +1,7 @@
/*
* COM1 NS16550 support
* originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
*
* further modified by Josh Huber <huber@mclx.com> to support
* the DUART on the Galileo Eval board. (db64360)
@@ -13,8 +13,8 @@
#ifdef ZUMA_NTL
/* no 16550 device */
#else
-const NS16550_t COM_PORTS[] = { (NS16550_t) (CFG_DUART_IO + 0),
- (NS16550_t) (CFG_DUART_IO + 0x20)
+const NS16550_t COM_PORTS[] = { (NS16550_t) (CONFIG_SYS_DUART_IO + 0),
+ (NS16550_t) (CONFIG_SYS_DUART_IO + 0x20)
};
volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
diff --git a/board/Marvell/common/ns16550.h b/board/Marvell/common/ns16550.h
index f2ed2ab..b9691ab 100644
--- a/board/Marvell/common/ns16550.h
+++ b/board/Marvell/common/ns16550.h
@@ -2,7 +2,7 @@
* NS16550 Serial Port
* originally from linux source (arch/ppc/boot/ns16550.h)
* modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
+ * have addresses as offsets from CONFIG_SYS_ISA_BASE
* added a few more definitions
* added prototypes for ns16550.c
* reduced no of com ports to 2
diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c
index 01efbea..3e7f406 100644
--- a/board/Marvell/common/serial.c
+++ b/board/Marvell/common/serial.c
@@ -52,17 +52,17 @@
int serial_init (void)
{
-#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
+#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
int clock_divisor = 230400 / gd->baudrate;
#endif
mpsc_init (gd->baudrate);
/* init the DUART chans so that KGDB in the kernel can use them */
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
NS16550_reinit (COM_PORTS[0], clock_divisor);
#endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
NS16550_reinit (COM_PORTS[1], clock_divisor);
#endif
return (0);
@@ -97,10 +97,10 @@
{
int clock_divisor = 230400 / gd->baudrate;
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
(void) NS16550_init (0, clock_divisor);
#endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
(void) NS16550_init (1, clock_divisor);
#endif
return (0);
@@ -109,29 +109,29 @@
void serial_putc (const char c)
{
if (c == '\n')
- NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
+ NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
- NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
+ NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
}
int serial_getc (void)
{
- return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
+ return NS16550_getc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
}
int serial_tstc (void)
{
- return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
+ return NS16550_tstc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
}
void serial_setbrg (void)
{
int clock_divisor = 230400 / gd->baudrate;
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
NS16550_reinit (COM_PORTS[0], clock_divisor);
#endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
NS16550_reinit (COM_PORTS[1], clock_divisor);
#endif
}
diff --git a/board/Marvell/db64360/db64360.c b/board/Marvell/db64360/db64360.c
index c03d03d..35b695e 100644
--- a/board/Marvell/db64360/db64360.c
+++ b/board/Marvell/db64360/db64360.c
@@ -55,7 +55,7 @@
/* ------------------------------------------------------------------------- */
/* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
/* Unfortunately, we cant change it while we are in flash, so we initialize it
* to the "final" value. This means that any debug_led calls before
@@ -64,7 +64,7 @@
*/
void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
int display_mem_map (void);
/* ------------------------------------------------------------------------- */
@@ -127,7 +127,7 @@
GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
- (stat & 0xffff0000) | CFG_PCI_IDSEL);
+ (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
}
if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) { /*if PCI-X */
@@ -136,7 +136,7 @@
GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
- (stat & 0xffff0000) | CFG_PCI_IDSEL);
+ (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
}
/* Enable master */
@@ -154,21 +154,21 @@
/* ronen- add write to pci remap registers for 64460.
in 64360 when writing to pci base go and overide remap automaticaly,
in 64460 it doesn't */
- GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
- GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
- GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
- GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
- GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
/* PCI interface settings */
/* Timeout set to retry forever */
@@ -184,7 +184,7 @@
for (stat = 0; stat <= PCI_HOST1; stat++)
pciWriteConfigReg (stat,
PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
- SELF, CFG_GT_REGS);
+ SELF, CONFIG_SYS_GT_REGS);
#endif
}
@@ -200,7 +200,7 @@
tmp = GTREGREAD (CPU_CONFIGURATION);
/* set the SINGLE_CPU bit see MV64360 P.399 */
-#ifndef CFG_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */
tmp |= CPU_CONF_SINGLE_CPU;
#endif
@@ -251,7 +251,7 @@
* it last time. (huber)
*/
- my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+ my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
/* No PCI in first release of Port To_do: enable it. */
#ifdef CONFIG_PCI
@@ -297,56 +297,56 @@
* on-board sram on the eval board, and updates the correct
* registers to boot from the sram. (device0)
*/
- if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+ if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE)
sram_boot = 1;
if (!sram_boot)
- memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+ memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
- memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
- memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
- memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+ memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+ memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+ memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
/* configure device timing */
-#ifdef CFG_DEV0_PAR /* set port parameters for SRAM device module access */
+#ifdef CONFIG_SYS_DEV0_PAR /* set port parameters for SRAM device module access */
if (!sram_boot)
- GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+ GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
#endif
-#ifdef CFG_DEV1_PAR /* set port parameters for RTC device module access */
- GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#ifdef CONFIG_SYS_DEV1_PAR /* set port parameters for RTC device module access */
+ GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
#endif
-#ifdef CFG_DEV2_PAR /* set port parameters for DUART device module access */
- GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#ifdef CONFIG_SYS_DEV2_PAR /* set port parameters for DUART device module access */
+ GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
#endif
-#ifdef CFG_32BIT_BOOT_PAR /* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR /* set port parameters for Flash device module access */
/* detect if we are booting from the 32 bit flash */
if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
/* 32 bit boot flash */
- GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
- CFG_32BIT_BOOT_PAR);
+ CONFIG_SYS_32BIT_BOOT_PAR);
} else {
/* 8 bit boot flash */
- GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
- GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
}
#else
/* 8 bit boot flash only */
-/* GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/* GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
#endif
gt_cpu_config ();
/* MPP setup */
- GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
- GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
- GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
- GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+ GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+ GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+ GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+ GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
- GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+ GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
DEBUG_LED0_ON ();
DEBUG_LED1_ON ();
DEBUG_LED2_ON ();
@@ -359,7 +359,7 @@
int misc_init_r ()
{
icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
l2cache_enable ();
#endif
#ifdef CONFIG_MPSC
@@ -380,9 +380,9 @@
/* check to see if we booted from the sram. If so, move things
* back to the way they should be. (we're running from main
* memory at this point now */
- if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
- memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
- memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+ if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE) {
+ memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+ memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_DFL_BOOTCS_BASE, _8M);
}
display_mem_map ();
/* now, jump to the main ppcboot board init code */
@@ -402,7 +402,7 @@
{
int l_type = 0;
- printf ("BOARD: %s\n", CFG_BOARD_NAME);
+ printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
return (l_type);
}
@@ -415,34 +415,34 @@
if (mode == 1) {
switch (led) {
case 0:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x08000);
break;
case 1:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x0c000);
break;
case 2:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x10000);
break;
}
} else if (mode == 0) {
switch (led) {
case 0:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x14000);
break;
case 1:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x18000);
break;
case 2:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x1c000);
break;
}
@@ -513,7 +513,7 @@
/* DRAM check routines copied from gw8260 */
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
/*********************************************************************/
/* NAME: move64() - moves a double word (64-bit) */
@@ -544,7 +544,7 @@
}
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
unsigned long long pattern[] = {
0xaaaaaaaaaaaaaaaaULL,
@@ -607,7 +607,7 @@
/*********************************************************************/
int mem_test_data (void)
{
- unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+ unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
unsigned long long temp64 = 0;
int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
int i;
@@ -634,9 +634,9 @@
return 0;
}
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
/*********************************************************************/
/* NAME: mem_test_address() - test address lines */
/* */
@@ -661,8 +661,8 @@
int mem_test_address (void)
{
volatile unsigned int *pmem =
- (volatile unsigned int *) CFG_MEMTEST_START;
- const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+ (volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+ const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
unsigned int i;
/* write address to each location */
@@ -679,9 +679,9 @@
}
return 0;
}
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
/*********************************************************************/
/* NAME: mem_march() - memory march */
/* */
@@ -739,7 +739,7 @@
}
return 0;
}
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
/*********************************************************************/
/* NAME: mem_test_walk() - a simple walking ones test */
@@ -771,8 +771,8 @@
{
unsigned long long mask;
volatile unsigned long long *pmem =
- (volatile unsigned long long *) CFG_MEMTEST_START;
- const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+ (volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+ const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
unsigned int i;
@@ -848,9 +848,9 @@
/* runwalk = 0; */
if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
- printf ("Testing RAM from 0x%08x to 0x%08x ... (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+ printf ("Testing RAM from 0x%08x to 0x%08x ... (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
if (rundata == 1) {
printf ("Test DATA ... ");
if (mem_test_data () == 1) {
@@ -860,7 +860,7 @@
printf ("ok \n");
}
#endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
if (runaddress == 1) {
printf ("Test ADDRESS ... ");
if (mem_test_address () == 1) {
@@ -870,7 +870,7 @@
printf ("ok \n");
}
#endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
if (runwalk == 1) {
printf ("Test WALKING ONEs ... ");
if (mem_test_walk () == 1) {
@@ -886,7 +886,7 @@
return 0;
}
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
/* ronen - the below functions are used by the bootm function */
/* - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -925,7 +925,7 @@
/* MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0x0000ff00); */
/* Relocate MV64360 internal regs */
- my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+ my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, BRIDGE_REG_BASE_BOOTM);
icache_disable ();
dcache_disable ();
diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c
index 923d955..7ad6ae8 100644
--- a/board/Marvell/db64360/mpsc.c
+++ b/board/Marvell/db64360/mpsc.c
@@ -426,7 +426,7 @@
(MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
/* Setup MPSC internal address space base address */
- GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+ GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);
/* no high address remap*/
GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -516,9 +516,9 @@
#ifdef ZUMA_NTL
/* from tclk */
- clock = (CFG_TCLK / (16 * rate)) - 1;
+ clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
#else
- clock = (CFG_TCLK / (16 * rate)) - 1;
+ clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
#endif
galbrg_set_CDV (channel, clock); /* set timer Reg. for BRG */
diff --git a/board/Marvell/db64360/pci.c b/board/Marvell/db64360/pci.c
index 5637284..a7e3c95 100644
--- a/board/Marvell/db64360/pci.c
+++ b/board/Marvell/db64360/pci.c
@@ -859,14 +859,14 @@
/* PCI memory space */
pci_set_region (pci0_hose.regions + 0,
- CFG_PCI0_0_MEM_SPACE,
- CFG_PCI0_0_MEM_SPACE,
- CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+ CONFIG_SYS_PCI0_0_MEM_SPACE,
+ CONFIG_SYS_PCI0_0_MEM_SPACE,
+ CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region (pci0_hose.regions + 1,
- CFG_PCI0_IO_SPACE_PCI,
- CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+ CONFIG_SYS_PCI0_IO_SPACE_PCI,
+ CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
pci_set_ops (&pci0_hose,
pci_hose_read_config_byte_via_dword,
@@ -901,14 +901,14 @@
/* PCI memory space */
pci_set_region (pci1_hose.regions + 0,
- CFG_PCI1_0_MEM_SPACE,
- CFG_PCI1_0_MEM_SPACE,
- CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+ CONFIG_SYS_PCI1_0_MEM_SPACE,
+ CONFIG_SYS_PCI1_0_MEM_SPACE,
+ CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region (pci1_hose.regions + 1,
- CFG_PCI1_IO_SPACE_PCI,
- CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+ CONFIG_SYS_PCI1_IO_SPACE_PCI,
+ CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
pci_set_ops (&pci1_hose,
pci_hose_read_config_byte_via_dword,
diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c
index ecadaf2..d0817d7 100644
--- a/board/Marvell/db64360/sdram_init.c
+++ b/board/Marvell/db64360/sdram_init.c
@@ -312,7 +312,7 @@
} else
dimmInfo->slot = slot; /* start to fill up dimminfo for this "slot" */
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
for (i = 0; i <= 127; i++) {
printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -690,16 +690,16 @@
if ((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
<
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
||
((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
==
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
&& (dimmInfo->
minimumCycleTimeAtMaxCasLatancy_RoP
<
- CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
{
dimmInfo->
maxClSupported_DDR
@@ -714,16 +714,16 @@
if ((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
>
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
||
((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
==
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
&& (dimmInfo->
minimumCycleTimeAtMaxCasLatancy_RoP
>
- CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
{
printf ("*********************************************************\n");
printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
@@ -1290,37 +1290,37 @@
case 0x0:
case 0x80: /* refresh period is 15.625 usec */
sdram_config_reg =
- (unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+ (unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
/ (float) 1000000.0);
break;
case 0x1:
case 0x81: /* refresh period is 3.9 usec */
sdram_config_reg =
- (unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x2:
case 0x82: /* refresh period is 7.8 usec */
sdram_config_reg =
- (unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x3:
case 0x83: /* refresh period is 31.3 usec */
sdram_config_reg =
- (unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x4:
case 0x84: /* refresh period is 62.5 usec */
sdram_config_reg =
- (unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x5:
case 0x85: /* refresh period is 125 usec */
sdram_config_reg =
- (unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
default: /* refresh period undefined */
@@ -1807,7 +1807,7 @@
printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
- for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+ for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
/* skip over banks that are not populated */
if (!checkbank[bank_no])
continue;
diff --git a/board/Marvell/db64460/db64460.c b/board/Marvell/db64460/db64460.c
index 8a05cd2..14e6355 100644
--- a/board/Marvell/db64460/db64460.c
+++ b/board/Marvell/db64460/db64460.c
@@ -55,7 +55,7 @@
/* ------------------------------------------------------------------------- */
/* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
/* Unfortunately, we cant change it while we are in flash, so we initialize it
* to the "final" value. This means that any debug_led calls before
@@ -64,7 +64,7 @@
*/
void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
int display_mem_map (void);
/* ------------------------------------------------------------------------- */
@@ -127,7 +127,7 @@
GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
- (stat & 0xffff0000) | CFG_PCI_IDSEL);
+ (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
}
if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) { /*if PCI-X */
@@ -136,7 +136,7 @@
GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
- (stat & 0xffff0000) | CFG_PCI_IDSEL);
+ (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
}
/* Enable master */
@@ -154,21 +154,21 @@
/* ronen- add write to pci remap registers for 64460.
in 64360 when writing to pci base go and overide remap automaticaly,
in 64460 it doesn't */
- GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
- GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
- GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
- GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
- GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_BASE >> 16);
+ GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
- GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
- GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+ GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+ GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
/* PCI interface settings */
/* Timeout set to retry forever */
@@ -184,7 +184,7 @@
for (stat = 0; stat <= PCI_HOST1; stat++)
pciWriteConfigReg (stat,
PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
- SELF, CFG_GT_REGS);
+ SELF, CONFIG_SYS_GT_REGS);
#endif
}
@@ -200,7 +200,7 @@
tmp = GTREGREAD (CPU_CONFIGURATION);
/* set the SINGLE_CPU bit see MV64460 P.399 */
-#ifndef CFG_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU /* SINGLE_CPU seems to cause JTAG problems */
tmp |= CPU_CONF_SINGLE_CPU;
#endif
@@ -251,7 +251,7 @@
* it last time. (huber)
*/
- my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+ my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
/* No PCI in first release of Port To_do: enable it. */
#ifdef CONFIG_PCI
@@ -297,56 +297,56 @@
* on-board sram on the eval board, and updates the correct
* registers to boot from the sram. (device0)
*/
- if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+ if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE)
sram_boot = 1;
if (!sram_boot)
- memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+ memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
- memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
- memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
- memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+ memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+ memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+ memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
/* configure device timing */
-#ifdef CFG_DEV0_PAR /* set port parameters for SRAM device module access */
+#ifdef CONFIG_SYS_DEV0_PAR /* set port parameters for SRAM device module access */
if (!sram_boot)
- GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+ GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
#endif
-#ifdef CFG_DEV1_PAR /* set port parameters for RTC device module access */
- GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#ifdef CONFIG_SYS_DEV1_PAR /* set port parameters for RTC device module access */
+ GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
#endif
-#ifdef CFG_DEV2_PAR /* set port parameters for DUART device module access */
- GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#ifdef CONFIG_SYS_DEV2_PAR /* set port parameters for DUART device module access */
+ GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
#endif
-#ifdef CFG_32BIT_BOOT_PAR /* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR /* set port parameters for Flash device module access */
/* detect if we are booting from the 32 bit flash */
if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
/* 32 bit boot flash */
- GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
- CFG_32BIT_BOOT_PAR);
+ CONFIG_SYS_32BIT_BOOT_PAR);
} else {
/* 8 bit boot flash */
- GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
- GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+ GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
}
#else
/* 8 bit boot flash only */
-/* GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/* GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
#endif
gt_cpu_config ();
/* MPP setup */
- GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
- GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
- GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
- GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+ GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+ GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+ GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+ GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
- GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+ GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
DEBUG_LED0_ON ();
DEBUG_LED1_ON ();
DEBUG_LED2_ON ();
@@ -359,7 +359,7 @@
int misc_init_r ()
{
icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
l2cache_enable ();
#endif
#ifdef CONFIG_MPSC
@@ -380,9 +380,9 @@
/* check to see if we booted from the sram. If so, move things
* back to the way they should be. (we're running from main
* memory at this point now */
- if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
- memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
- memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+ if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE) {
+ memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+ memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_DFL_BOOTCS_BASE, _8M);
}
display_mem_map ();
/* now, jump to the main ppcboot board init code */
@@ -402,7 +402,7 @@
{
int l_type = 0;
- printf ("BOARD: %s\n", CFG_BOARD_NAME);
+ printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
return (l_type);
}
@@ -415,34 +415,34 @@
if (mode == 1) {
switch (led) {
case 0:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x08000);
break;
case 1:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x0c000);
break;
case 2:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x10000);
break;
}
} else if (mode == 0) {
switch (led) {
case 0:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x14000);
break;
case 1:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x18000);
break;
case 2:
- addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+ addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
0x1c000);
break;
}
@@ -513,7 +513,7 @@
/* DRAM check routines copied from gw8260 */
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
/*********************************************************************/
/* NAME: move64() - moves a double word (64-bit) */
@@ -544,7 +544,7 @@
}
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
unsigned long long pattern[] = {
0xaaaaaaaaaaaaaaaaULL,
@@ -607,7 +607,7 @@
/*********************************************************************/
int mem_test_data (void)
{
- unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+ unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
unsigned long long temp64 = 0;
int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
int i;
@@ -634,9 +634,9 @@
return 0;
}
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
/*********************************************************************/
/* NAME: mem_test_address() - test address lines */
/* */
@@ -661,8 +661,8 @@
int mem_test_address (void)
{
volatile unsigned int *pmem =
- (volatile unsigned int *) CFG_MEMTEST_START;
- const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+ (volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+ const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
unsigned int i;
/* write address to each location */
@@ -679,9 +679,9 @@
}
return 0;
}
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
/*********************************************************************/
/* NAME: mem_march() - memory march */
/* */
@@ -739,7 +739,7 @@
}
return 0;
}
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
/*********************************************************************/
/* NAME: mem_test_walk() - a simple walking ones test */
@@ -771,8 +771,8 @@
{
unsigned long long mask;
volatile unsigned long long *pmem =
- (volatile unsigned long long *) CFG_MEMTEST_START;
- const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+ (volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+ const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
unsigned int i;
@@ -848,9 +848,9 @@
/* runwalk = 0; */
if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
- printf ("Testing RAM from 0x%08x to 0x%08x ... (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+ printf ("Testing RAM from 0x%08x to 0x%08x ... (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
if (rundata == 1) {
printf ("Test DATA ... ");
if (mem_test_data () == 1) {
@@ -860,7 +860,7 @@
printf ("ok \n");
}
#endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
if (runaddress == 1) {
printf ("Test ADDRESS ... ");
if (mem_test_address () == 1) {
@@ -870,7 +870,7 @@
printf ("ok \n");
}
#endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
if (runwalk == 1) {
printf ("Test WALKING ONEs ... ");
if (mem_test_walk () == 1) {
@@ -886,7 +886,7 @@
return 0;
}
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
/* ronen - the below functions are used by the bootm function */
/* - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -925,7 +925,7 @@
GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00);
/* Relocate MV64460 internal regs */
- my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+ my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, BRIDGE_REG_BASE_BOOTM);
icache_disable ();
dcache_disable ();
diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c
index 359b831..303a636 100644
--- a/board/Marvell/db64460/mpsc.c
+++ b/board/Marvell/db64460/mpsc.c
@@ -426,7 +426,7 @@
(MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
/* Setup MPSC internal address space base address */
- GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+ GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);
/* no high address remap*/
GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -516,9 +516,9 @@
#ifdef ZUMA_NTL
/* from tclk */
- clock = (CFG_TCLK / (16 * rate)) - 1;
+ clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
#else
- clock = (CFG_TCLK / (16 * rate)) - 1;
+ clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
#endif
galbrg_set_CDV (channel, clock); /* set timer Reg. for BRG */
diff --git a/board/Marvell/db64460/pci.c b/board/Marvell/db64460/pci.c
index 5637284..a7e3c95 100644
--- a/board/Marvell/db64460/pci.c
+++ b/board/Marvell/db64460/pci.c
@@ -859,14 +859,14 @@
/* PCI memory space */
pci_set_region (pci0_hose.regions + 0,
- CFG_PCI0_0_MEM_SPACE,
- CFG_PCI0_0_MEM_SPACE,
- CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+ CONFIG_SYS_PCI0_0_MEM_SPACE,
+ CONFIG_SYS_PCI0_0_MEM_SPACE,
+ CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region (pci0_hose.regions + 1,
- CFG_PCI0_IO_SPACE_PCI,
- CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+ CONFIG_SYS_PCI0_IO_SPACE_PCI,
+ CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
pci_set_ops (&pci0_hose,
pci_hose_read_config_byte_via_dword,
@@ -901,14 +901,14 @@
/* PCI memory space */
pci_set_region (pci1_hose.regions + 0,
- CFG_PCI1_0_MEM_SPACE,
- CFG_PCI1_0_MEM_SPACE,
- CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+ CONFIG_SYS_PCI1_0_MEM_SPACE,
+ CONFIG_SYS_PCI1_0_MEM_SPACE,
+ CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region (pci1_hose.regions + 1,
- CFG_PCI1_IO_SPACE_PCI,
- CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+ CONFIG_SYS_PCI1_IO_SPACE_PCI,
+ CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
pci_set_ops (&pci1_hose,
pci_hose_read_config_byte_via_dword,
diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c
index f36f348..6d6b126 100644
--- a/board/Marvell/db64460/sdram_init.c
+++ b/board/Marvell/db64460/sdram_init.c
@@ -312,7 +312,7 @@
} else
dimmInfo->slot = slot; /* start to fill up dimminfo for this "slot" */
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
for (i = 0; i <= 127; i++) {
printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -690,16 +690,16 @@
if ((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
<
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
||
((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
==
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
&& (dimmInfo->
minimumCycleTimeAtMaxCasLatancy_RoP
<
- CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
{
dimmInfo->
maxClSupported_DDR
@@ -714,16 +714,16 @@
if ((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
>
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
||
((dimmInfo->
minimumCycleTimeAtMaxCasLatancy_LoP
==
- CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
&& (dimmInfo->
minimumCycleTimeAtMaxCasLatancy_RoP
>
- CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+ CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
{
printf ("*********************************************************\n");
printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
@@ -1289,37 +1289,37 @@
case 0x0:
case 0x80: /* refresh period is 15.625 usec */
sdram_config_reg =
- (unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+ (unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
/ (float) 1000000.0);
break;
case 0x1:
case 0x81: /* refresh period is 3.9 usec */
sdram_config_reg =
- (unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x2:
case 0x82: /* refresh period is 7.8 usec */
sdram_config_reg =
- (unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x3:
case 0x83: /* refresh period is 31.3 usec */
sdram_config_reg =
- (unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x4:
case 0x84: /* refresh period is 62.5 usec */
sdram_config_reg =
- (unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
case 0x5:
case 0x85: /* refresh period is 125 usec */
sdram_config_reg =
- (unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+ (unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
(float) 1000000.0);
break;
default: /* refresh period undefined */
@@ -1816,7 +1816,7 @@
printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
- for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+ for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
/* skip over banks that are not populated */
if (!checkbank[bank_no])
continue;
diff --git a/board/MigoR/migo_r.c b/board/MigoR/migo_r.c
index b31f37d..204ca78 100644
--- a/board/MigoR/migo_r.c
+++ b/board/MigoR/migo_r.c
@@ -42,9 +42,9 @@
{
DECLARE_GLOBAL_DATA_PTR;
- gd->bd->bi_memstart = CFG_SDRAM_BASE;
- gd->bd->bi_memsize = CFG_SDRAM_SIZE;
- printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
return 0;
}
diff --git a/board/RPXClassic/RPXClassic.c b/board/RPXClassic/RPXClassic.c
index 804635a..9fdf700 100644
--- a/board/RPXClassic/RPXClassic.c
+++ b/board/RPXClassic/RPXClassic.c
@@ -111,7 +111,7 @@
char buff[256], *cp;
/* Initialize I2C */
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
/* Read 256 bytes in EEPROM */
i2c_read (0x54, 0, 1, (uchar *)buff, 128);
@@ -167,7 +167,7 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size10;
@@ -175,15 +175,15 @@
sizeof (sdram_table) / sizeof (uint));
/* Refresh clock prescalar */
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
memctl->memc_mar = 0x00000000;
/* Map controller banks 1 to the SDRAM bank */
- memctl->memc_or1 = CFG_OR1_PRELIM;
- memctl->memc_br1 = CFG_BR1_PRELIM;
+ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
- memctl->memc_mamr = CFG_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
@@ -200,7 +200,7 @@
* try 10 column mode
*/
- size10 = dram_size (CFG_MAMR_10COL, SDRAM_BASE_PRELIM,
+ size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM,
SDRAM_MAX_SIZE);
return (size10);
@@ -218,7 +218,7 @@
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
diff --git a/board/RPXClassic/eccx.c b/board/RPXClassic/eccx.c
index cc76bbd..e1f3f9d 100644
--- a/board/RPXClassic/eccx.c
+++ b/board/RPXClassic/eccx.c
@@ -299,7 +299,7 @@
*/
unsigned int board_video_init (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
/* Program ECCX registers */
diff --git a/board/RPXClassic/flash.c b/board/RPXClassic/flash.c
index 2e0b8f9..f07d960 100644
--- a/board/RPXClassic/flash.c
+++ b/board/RPXClassic/flash.c
@@ -33,7 +33,7 @@
#include <common.h>
#include <mpc8xx.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -51,20 +51,20 @@
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
- size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+ size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
- flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+ flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
@@ -313,7 +313,7 @@
last = start;
addr = (vu_long *)(info->start[l_sect]);
while ((addr[0] & 0x80808080) != 0x80808080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -436,7 +436,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/RPXlite/RPXlite.c b/board/RPXlite/RPXlite.c
index bca31e4..dca53a4 100644
--- a/board/RPXlite/RPXlite.c
+++ b/board/RPXlite/RPXlite.c
@@ -104,7 +104,7 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size10;
@@ -112,15 +112,15 @@
sizeof (sdram_table) / sizeof (uint));
/* Refresh clock prescalar */
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
memctl->memc_mar = 0x00000000;
/* Map controller banks 1 to the SDRAM bank */
- memctl->memc_or1 = CFG_OR1_PRELIM;
- memctl->memc_br1 = CFG_BR1_PRELIM;
+ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
- memctl->memc_mamr = CFG_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
@@ -137,7 +137,7 @@
* try 10 column mode
*/
- size10 = dram_size (CFG_MAMR_10COL, SDRAM_BASE_PRELIM,
+ size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM,
SDRAM_MAX_SIZE);
return (size10);
@@ -156,7 +156,7 @@
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
diff --git a/board/RPXlite/flash.c b/board/RPXlite/flash.c
index 659d60a..788fcdf 100644
--- a/board/RPXlite/flash.c
+++ b/board/RPXlite/flash.c
@@ -38,7 +38,7 @@
#include <common.h>
#include <mpc8xx.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -52,13 +52,13 @@
unsigned long flash_init (void)
{
-/* volatile immap_t *immap = (immap_t *)CFG_IMMR; */
+/* volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; */
/* volatile memctl8xx_t *memctl = &immap->im_memctl; */
unsigned long size_b0 ;
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -73,19 +73,19 @@
*/
/* Remap FLASH according to real size */
/*%%%
- memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
- memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+ memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+ memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
%%%*/
/* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
- flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+ size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+ flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
@@ -390,7 +390,7 @@
last = start;
addr = (vu_long *)(info->start[l_sect]);
while ((addr[0] & 0x80808080) != 0x80808080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -513,7 +513,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/RPXlite_dw/RPXlite_dw.c b/board/RPXlite_dw/RPXlite_dw.c
index d6fabf0..364a316 100644
--- a/board/RPXlite_dw/RPXlite_dw.c
+++ b/board/RPXlite_dw/RPXlite_dw.c
@@ -106,22 +106,22 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size9;
upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
/* Refresh clock prescalar */
- memctl->memc_mptpr = CFG_MPTPR ;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR ;
memctl->memc_mar = 0x00000088;
/* Map controller banks 1 to the SDRAM bank */
- memctl->memc_or1 = CFG_OR1_PRELIM;
- memctl->memc_br1 = CFG_BR1_PRELIM;
+ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
- memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
/*Disable Periodic timer A. */
udelay(200);
@@ -142,13 +142,13 @@
* try 9 column mode
*/
- size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE);
+ size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE);
/*
* Final mapping:
*/
- memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
udelay (1000);
@@ -171,7 +171,7 @@
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
diff --git a/board/RPXlite_dw/flash.c b/board/RPXlite_dw/flash.c
index 41cb036..91788af 100644
--- a/board/RPXlite_dw/flash.c
+++ b/board/RPXlite_dw/flash.c
@@ -49,7 +49,7 @@
#include <common.h>
#include <mpc8xx.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions vu_long : volatile unsigned long IN include/common.h
@@ -64,22 +64,22 @@
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
- size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
- flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+ size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+ flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* If Monitor is in the cope of FLASH,then
* protect this area by default in case for
* other occupation. [SAM] */
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
&flash_info[0]);
#endif
flash_info[0].size = size_b0;
@@ -360,7 +360,7 @@
last = start;
addr = (vu_long *)(info->start[l_sect]);
while ((addr[0] & 0x80808080) != 0x80808080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -482,7 +482,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/RRvision/RRvision.c b/board/RRvision/RRvision.c
index c0b772d..9d016c5 100644
--- a/board/RRvision/RRvision.c
+++ b/board/RRvision/RRvision.c
@@ -112,7 +112,7 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long reg;
long int size8, size9;
@@ -126,17 +126,17 @@
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
- memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
memctl->memc_mar = 0x00000088;
/*
* Map controller bank 1 the SDRAM bank 2 at physical address 0.
*/
- memctl->memc_or1 = CFG_OR2_PRELIM;
- memctl->memc_br1 = CFG_BR2_PRELIM;
+ memctl->memc_or1 = CONFIG_SYS_OR2_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR2_PRELIM;
- memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
@@ -156,7 +156,7 @@
*
* try 8 column mode
*/
- size8 = dram_size (CFG_MAMR_8COL,
+ size8 = dram_size (CONFIG_SYS_MAMR_8COL,
SDRAM_BASE2_PRELIM,
SDRAM_MAX_SIZE);
@@ -165,7 +165,7 @@
/*
* try 9 column mode
*/
- size9 = dram_size (CFG_MAMR_9COL,
+ size9 = dram_size (CONFIG_SYS_MAMR_9COL,
SDRAM_BASE2_PRELIM,
SDRAM_MAX_SIZE);
@@ -174,7 +174,7 @@
/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
} else { /* back to 8 columns */
size = size8;
- memctl->memc_mamr = CFG_MAMR_8COL;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
udelay (500);
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
}
@@ -187,15 +187,15 @@
*/
if (size < 0x02000000) {
/* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
udelay (1000);
}
/*
* Final mapping
*/
- memctl->memc_or1 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
- memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+ memctl->memc_or1 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+ memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
/*
* No bank 1
@@ -206,7 +206,7 @@
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
udelay (10000);
@@ -227,7 +227,7 @@
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
diff --git a/board/RRvision/flash.c b/board/RRvision/flash.c
index 6608bca..fdbe928 100644
--- a/board/RRvision/flash.c
+++ b/board/RRvision/flash.c
@@ -27,10 +27,10 @@
#include <mpc8xx.h>
#ifndef CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
#endif
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -43,13 +43,13 @@
unsigned long flash_init (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long size;
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -63,17 +63,17 @@
}
/* Remap FLASH according to real size */
- memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & OR_AM_MSK);
- memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+ memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & OR_AM_MSK);
+ memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
/* Re-do sizing to get full correct info */
- size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+ size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
@@ -388,7 +388,7 @@
last = start;
addr = (vu_long*)(info->start[l_sect]);
while ((addr[0] & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
puts ("Timeout\n");
return 1;
}
@@ -511,7 +511,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/a3000/a3000.c b/board/a3000/a3000.c
index 1ba21ed..ce2cf28 100644
--- a/board/a3000/a3000.c
+++ b/board/a3000/a3000.c
@@ -46,7 +46,7 @@
long mear1;
long emear1;
- size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+ size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
new_bank0_end = size - 1;
mear1 = mpc824x_mpc107_getreg(MEAR1);
diff --git a/board/a3000/flash.c b/board/a3000/flash.c
index add2a28..b671ce7 100644
--- a/board/a3000/flash.c
+++ b/board/a3000/flash.c
@@ -27,7 +27,7 @@
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
# endif
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
@@ -48,7 +48,7 @@
#endif
/*---------------------------------------------------------------------*/
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -65,13 +65,13 @@
unsigned long flash_init (void)
{
- unsigned long flash_banks[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS;
- unsigned long size, size_b[CFG_MAX_FLASH_BANKS];
+ unsigned long flash_banks[CONFIG_SYS_MAX_FLASH_BANKS] = CONFIG_SYS_FLASH_BANKS;
+ unsigned long size, size_b[CONFIG_SYS_MAX_FLASH_BANKS];
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
{
flash_info[i].flash_id = FLASH_UNKNOWN;
@@ -99,12 +99,12 @@
}
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
- DEBUGF("protect monitor %x @ %x\n", CFG_MONITOR_BASE, CFG_MONITOR_LEN);
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+ DEBUGF("protect monitor %x @ %x\n", CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN);
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
&flash_info[0]);
#endif
@@ -119,7 +119,7 @@
size = 0;
DEBUGF("## Final Flash bank sizes: ");
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
{
DEBUGF("%08lx ", size_b[i]);
size += size_b[i];
@@ -285,10 +285,10 @@
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = BS(0xFF); /* restore read mode */
@@ -356,7 +356,7 @@
udelay (1000);
while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
- if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = BS(0xB0); /* suspend erase */
*addr = BS(0xFF); /* reset to read mode */
@@ -439,7 +439,7 @@
start = get_timer (0);
while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = BS(0xFF); /* restore read mode */
return 1;
}
diff --git a/board/actux1/actux1.c b/board/actux1/actux1.c
index d1d7f6c..399be23 100644
--- a/board/actux1/actux1.c
+++ b/board/actux1/actux1.c
@@ -49,16 +49,16 @@
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
- GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
/* Setup GPIO's for PCI INTA */
- GPIO_OUTPUT_DISABLE (CFG_GPIO_PCI1_INTA);
- GPIO_INT_ACT_LOW_SET (CFG_GPIO_PCI1_INTA);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI1_INTA);
+ GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI1_INTA);
/* Setup GPIO's for 33MHz clock output */
- GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
*IXP425_GPIO_GPCLKR = 0x011001FF;
/* CS5: Debug port */
@@ -69,7 +69,7 @@
*IXP425_EXP_CS7 = 0x80900003;
udelay (533);
- GPIO_OUTPUT_SET (CFG_GPIO_IORST);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
ACTUX1_LED1 (2);
ACTUX1_LED2 (2);
diff --git a/board/actux1/actux1_hw.h b/board/actux1/actux1_hw.h
index bb3b7f9..fe454c5 100644
--- a/board/actux1/actux1_hw.h
+++ b/board/actux1/actux1_hw.h
@@ -42,16 +42,16 @@
#define ACTUX1_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F)
/* GPIO settings */
-#define CFG_GPIO_PCI1_INTA 2
-#define CFG_GPIO_PCI2_INTA 3
-#define CFG_GPIO_I2C_SDA 4
-#define CFG_GPIO_I2C_SCL 5
-#define CFG_GPIO_DBGJUMPER 9
-#define CFG_GPIO_BUTTON1 10
-#define CFG_GPIO_DBGSENSE 11
-#define CFG_GPIO_DTR 12
-#define CFG_GPIO_IORST 13 /* Out */
-#define CFG_GPIO_PCI_CLK 14 /* Out */
-#define CFG_GPIO_EXTBUS_CLK 15 /* Out */
+#define CONFIG_SYS_GPIO_PCI1_INTA 2
+#define CONFIG_SYS_GPIO_PCI2_INTA 3
+#define CONFIG_SYS_GPIO_I2C_SDA 4
+#define CONFIG_SYS_GPIO_I2C_SCL 5
+#define CONFIG_SYS_GPIO_DBGJUMPER 9
+#define CONFIG_SYS_GPIO_BUTTON1 10
+#define CONFIG_SYS_GPIO_DBGSENSE 11
+#define CONFIG_SYS_GPIO_DTR 12
+#define CONFIG_SYS_GPIO_IORST 13 /* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */
#endif
diff --git a/board/actux2/actux2.c b/board/actux2/actux2.c
index 99daef6..d6aaad6 100644
--- a/board/actux2/actux2.c
+++ b/board/actux2/actux2.c
@@ -50,24 +50,24 @@
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
- GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_ETHRST);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_DSR);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_DCD);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_ETHRST);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DSR);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DCD);
- GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
- GPIO_OUTPUT_CLEAR (CFG_GPIO_ETHRST);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_ETHRST);
- GPIO_OUTPUT_CLEAR (CFG_GPIO_DSR);
- GPIO_OUTPUT_SET (CFG_GPIO_DCD);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_DSR);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_DCD);
/* Setup GPIO's for Interrupt inputs */
- GPIO_OUTPUT_DISABLE (CFG_GPIO_DBGINT);
- GPIO_OUTPUT_DISABLE (CFG_GPIO_ETHINT);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_DBGINT);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_ETHINT);
/* Setup GPIO's for 33MHz clock output */
- GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
*IXP425_GPIO_GPCLKR = 0x011001FF;
/* CS1: IPAC-X */
@@ -80,8 +80,8 @@
*IXP425_EXP_CS7 = 0x80900003;
udelay (533);
- GPIO_OUTPUT_SET (CFG_GPIO_IORST);
- GPIO_OUTPUT_SET (CFG_GPIO_ETHRST);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST);
ACTUX2_LED1 (1);
ACTUX2_LED2 (0);
diff --git a/board/actux2/actux2_hw.h b/board/actux2/actux2_hw.h
index 8ffb82a..0f5ebcb 100644
--- a/board/actux2/actux2_hw.h
+++ b/board/actux2/actux2_hw.h
@@ -39,21 +39,21 @@
/*
* GPIO settings
*/
-#define CFG_GPIO_DBGINT 0
-#define CFG_GPIO_ETHINT 1
-#define CFG_GPIO_ETHRST 2 /* Out */
-#define CFG_GPIO_LED5_GN 3 /* Out */
-#define CFG_GPIO_UNUSED4 4
-#define CFG_GPIO_UNUSED5 5
-#define CFG_GPIO_DSR 6 /* Out */
-#define CFG_GPIO_DCD 7 /* Out */
-#define CFG_GPIO_IPAC_INT 8
-#define CFG_GPIO_DBGJUMPER 9
-#define CFG_GPIO_BUTTON1 10
-#define CFG_GPIO_DBGSENSE 11
-#define CFG_GPIO_DTR 12
-#define CFG_GPIO_IORST 13 /* Out */
-#define CFG_GPIO_PCI_CLK 14 /* Out */
-#define CFG_GPIO_EXTBUS_CLK 15 /* Out */
+#define CONFIG_SYS_GPIO_DBGINT 0
+#define CONFIG_SYS_GPIO_ETHINT 1
+#define CONFIG_SYS_GPIO_ETHRST 2 /* Out */
+#define CONFIG_SYS_GPIO_LED5_GN 3 /* Out */
+#define CONFIG_SYS_GPIO_UNUSED4 4
+#define CONFIG_SYS_GPIO_UNUSED5 5
+#define CONFIG_SYS_GPIO_DSR 6 /* Out */
+#define CONFIG_SYS_GPIO_DCD 7 /* Out */
+#define CONFIG_SYS_GPIO_IPAC_INT 8
+#define CONFIG_SYS_GPIO_DBGJUMPER 9
+#define CONFIG_SYS_GPIO_BUTTON1 10
+#define CONFIG_SYS_GPIO_DBGSENSE 11
+#define CONFIG_SYS_GPIO_DTR 12
+#define CONFIG_SYS_GPIO_IORST 13 /* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */
#endif
diff --git a/board/actux3/actux3.c b/board/actux3/actux3.c
index 812bc2b..63bf365 100644
--- a/board/actux3/actux3.c
+++ b/board/actux3/actux3.c
@@ -50,35 +50,35 @@
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
- GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_ETHRST);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_DSR);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_DCD);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_LED5_GN);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_LED6_RT);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_LED6_GN);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_ETHRST);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DSR);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DCD);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED5_GN);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_RT);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_GN);
- GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
- GPIO_OUTPUT_CLEAR (CFG_GPIO_ETHRST);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_ETHRST);
- GPIO_OUTPUT_CLEAR (CFG_GPIO_DSR);
- GPIO_OUTPUT_SET (CFG_GPIO_DCD);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_DSR);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_DCD);
- GPIO_OUTPUT_CLEAR (CFG_GPIO_LED5_GN);
- GPIO_OUTPUT_CLEAR (CFG_GPIO_LED6_RT);
- GPIO_OUTPUT_CLEAR (CFG_GPIO_LED6_GN);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED5_GN);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_RT);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_GN);
/*
* Setup GPIO's for Interrupt inputs
*/
- GPIO_OUTPUT_DISABLE (CFG_GPIO_DBGINT);
- GPIO_OUTPUT_DISABLE (CFG_GPIO_ETHINT);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_DBGINT);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_ETHINT);
/*
* Setup GPIO's for 33MHz clock output
*/
- GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
*IXP425_GPIO_GPCLKR = 0x011001FF;
/* CS1: IPAC-X */
@@ -91,8 +91,8 @@
*IXP425_EXP_CS7 = 0x80900003;
udelay (533);
- GPIO_OUTPUT_SET (CFG_GPIO_IORST);
- GPIO_OUTPUT_SET (CFG_GPIO_ETHRST);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST);
ACTUX3_LED1_RT (1);
ACTUX3_LED1_GN (0);
diff --git a/board/actux3/actux3_hw.h b/board/actux3/actux3_hw.h
index 9b7cbce..c3c0cfc 100644
--- a/board/actux3/actux3_hw.h
+++ b/board/actux3/actux3_hw.h
@@ -41,20 +41,20 @@
#define ACTUX3_OPTION (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0)
/* GPIO settings */
-#define CFG_GPIO_DBGINT 0
-#define CFG_GPIO_ETHINT 1
-#define CFG_GPIO_ETHRST 2 /* Out */
-#define CFG_GPIO_LED5_GN 3 /* Out */
-#define CFG_GPIO_LED6_RT 4 /* Out */
-#define CFG_GPIO_LED6_GN 5 /* Out */
-#define CFG_GPIO_DSR 6 /* Out */
-#define CFG_GPIO_DCD 7 /* Out */
-#define CFG_GPIO_DBGJUMPER 9
-#define CFG_GPIO_BUTTON1 10
-#define CFG_GPIO_DBGSENSE 11
-#define CFG_GPIO_DTR 12
-#define CFG_GPIO_IORST 13 /* Out */
-#define CFG_GPIO_PCI_CLK 14 /* Out */
-#define CFG_GPIO_EXTBUS_CLK 15 /* Out */
+#define CONFIG_SYS_GPIO_DBGINT 0
+#define CONFIG_SYS_GPIO_ETHINT 1
+#define CONFIG_SYS_GPIO_ETHRST 2 /* Out */
+#define CONFIG_SYS_GPIO_LED5_GN 3 /* Out */
+#define CONFIG_SYS_GPIO_LED6_RT 4 /* Out */
+#define CONFIG_SYS_GPIO_LED6_GN 5 /* Out */
+#define CONFIG_SYS_GPIO_DSR 6 /* Out */
+#define CONFIG_SYS_GPIO_DCD 7 /* Out */
+#define CONFIG_SYS_GPIO_DBGJUMPER 9
+#define CONFIG_SYS_GPIO_BUTTON1 10
+#define CONFIG_SYS_GPIO_DBGSENSE 11
+#define CONFIG_SYS_GPIO_DTR 12
+#define CONFIG_SYS_GPIO_IORST 13 /* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */
#endif
diff --git a/board/actux4/actux4.c b/board/actux4/actux4.c
index 84037fa..f373b58 100644
--- a/board/actux4/actux4.c
+++ b/board/actux4/actux4.c
@@ -49,53 +49,53 @@
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
- GPIO_OUTPUT_CLEAR (CFG_GPIO_nPWRON);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_nPWRON);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_nPWRON);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_nPWRON);
- GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
/* led not populated on board*/
- GPIO_OUTPUT_ENABLE (CFG_GPIO_LED3);
- GPIO_OUTPUT_SET (CFG_GPIO_LED3);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED3);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED3);
/* middle LED */
- GPIO_OUTPUT_ENABLE (CFG_GPIO_LED2);
- GPIO_OUTPUT_SET (CFG_GPIO_LED2);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED2);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED2);
/* right LED */
/* weak pulldown = LED weak on */
- GPIO_OUTPUT_DISABLE (CFG_GPIO_LED1);
- GPIO_OUTPUT_SET (CFG_GPIO_LED1);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_LED1);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED1);
/* Setup GPIO's for Interrupt inputs */
- GPIO_OUTPUT_DISABLE (CFG_GPIO_USBINTA);
- GPIO_OUTPUT_DISABLE (CFG_GPIO_USBINTB);
- GPIO_OUTPUT_DISABLE (CFG_GPIO_USBINTC);
- GPIO_OUTPUT_DISABLE (CFG_GPIO_RTCINT);
- GPIO_OUTPUT_DISABLE (CFG_GPIO_PCI_INTA);
- GPIO_OUTPUT_DISABLE (CFG_GPIO_PCI_INTB);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTA);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTB);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTC);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_RTCINT);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI_INTA);
+ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI_INTB);
- GPIO_INT_ACT_LOW_SET (CFG_GPIO_USBINTA);
- GPIO_INT_ACT_LOW_SET (CFG_GPIO_USBINTB);
- GPIO_INT_ACT_LOW_SET (CFG_GPIO_USBINTC);
- GPIO_INT_ACT_LOW_SET (CFG_GPIO_RTCINT);
- GPIO_INT_ACT_LOW_SET (CFG_GPIO_PCI_INTA);
- GPIO_INT_ACT_LOW_SET (CFG_GPIO_PCI_INTB);
+ GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTA);
+ GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTB);
+ GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTC);
+ GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_RTCINT);
+ GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI_INTA);
+ GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI_INTB);
/* Setup GPIO's for 33MHz clock output */
*IXP425_GPIO_GPCLKR = 0x011001FF;
- GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
- GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
+ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
*IXP425_EXP_CS1 = 0xbd113c42;
udelay (10000);
- GPIO_OUTPUT_SET (CFG_GPIO_IORST);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
udelay (10000);
- GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
+ GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
udelay (10000);
- GPIO_OUTPUT_SET (CFG_GPIO_IORST);
+ GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
return 0;
}
diff --git a/board/actux4/actux4_hw.h b/board/actux4/actux4_hw.h
index 8b3ecf3..afd1c06 100644
--- a/board/actux4/actux4_hw.h
+++ b/board/actux4/actux4_hw.h
@@ -29,21 +29,21 @@
/*
* GPIO settings
*/
-#define CFG_GPIO_USBINTA 0
-#define CFG_GPIO_USBINTB 1
-#define CFG_GPIO_USBINTC 2
-#define CFG_GPIO_nPWRON 3 /* Out */
-#define CFG_GPIO_I2C_SCL 4
-#define CFG_GPIO_I2C_SDA 5
-#define CFG_GPIO_PCI_INTB 6
-#define CFG_GPIO_BUTTON1 7
-#define CFG_GPIO_LED1 8 /* Out */
-#define CFG_GPIO_RTCINT 9
-#define CFG_GPIO_LED2 10 /* Out */
-#define CFG_GPIO_PCI_INTA 11
-#define CFG_GPIO_IORST 12 /* Out */
-#define CFG_GPIO_LED3 13 /* Out */
-#define CFG_GPIO_PCI_CLK 14 /* Out */
-#define CFG_GPIO_EXTBUS_CLK 15 /* Out */
+#define CONFIG_SYS_GPIO_USBINTA 0
+#define CONFIG_SYS_GPIO_USBINTB 1
+#define CONFIG_SYS_GPIO_USBINTC 2
+#define CONFIG_SYS_GPIO_nPWRON 3 /* Out */
+#define CONFIG_SYS_GPIO_I2C_SCL 4
+#define CONFIG_SYS_GPIO_I2C_SDA 5
+#define CONFIG_SYS_GPIO_PCI_INTB 6
+#define CONFIG_SYS_GPIO_BUTTON1 7
+#define CONFIG_SYS_GPIO_LED1 8 /* Out */
+#define CONFIG_SYS_GPIO_RTCINT 9
+#define CONFIG_SYS_GPIO_LED2 10 /* Out */
+#define CONFIG_SYS_GPIO_PCI_INTA 11
+#define CONFIG_SYS_GPIO_IORST 12 /* Out */
+#define CONFIG_SYS_GPIO_LED3 13 /* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */
#endif
diff --git a/board/adder/adder.c b/board/adder/adder.c
index e8a5737..87791de 100644
--- a/board/adder/adder.c
+++ b/board/adder/adder.c
@@ -68,7 +68,7 @@
phys_size_t initdram (int board_type)
{
long int msize;
- volatile immap_t *immap = (volatile immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
@@ -76,7 +76,7 @@
/* Configure SDRAM refresh */
memctl->memc_mptpr = MPTPR_PTP_DIV32; /* BRGCLK/32 */
- memctl->memc_mamr = (94 << 24) | CFG_MAMR; /* No refresh */
+ memctl->memc_mamr = (94 << 24) | CONFIG_SYS_MAMR; /* No refresh */
udelay(200);
/* Run precharge from location 0x15 */
@@ -94,10 +94,10 @@
udelay(200);
memctl->memc_mamr |= MAMR_PTAE; /* Enable refresh */
- memctl->memc_or1 = ~(CFG_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
- memctl->memc_br1 = CFG_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
+ memctl->memc_or1 = ~(CONFIG_SYS_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
+ memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
- msize = get_ram_size(CFG_SDRAM_BASE, CFG_SDRAM_MAX_SIZE);
+ msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_MAX_SIZE);
memctl->memc_or1 |= ~(msize - 1);
return msize;
diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index deaa292..0610928 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -53,16 +53,16 @@
int board_early_init_f (void)
{
- volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 lpcaw;
/*
* Initialize Local Window for the CPLD registers access (CS2 selects
* the CPLD chip)
*/
- im->sysconf.lpcs2aw = CSAW_START(CFG_CPLD_BASE) |
- CSAW_STOP(CFG_CPLD_BASE, CFG_CPLD_SIZE);
- im->lpc.cs_cfg[2] = CFG_CS2_CFG;
+ im->sysconf.lpcs2aw = CSAW_START(CONFIG_SYS_CPLD_BASE) |
+ CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE);
+ im->lpc.cs_cfg[2] = CONFIG_SYS_CS2_CFG;
/*
* According to MPC5121e RM, configuring local access windows should
@@ -80,21 +80,21 @@
*/
#ifdef CONFIG_ADS5121_REV2
- *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+ *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1;
#else
- if (*((u8 *)(CFG_CPLD_BASE + 0x08)) & 0x04) {
- *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+ if (*((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) {
+ *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1;
} else {
/* running from Backup flash */
- *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0x32;
+ *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0x32;
}
#endif
/*
* Configure Flash Speed
*/
- *((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS0_CONFIG)) = CFG_CS0_CFG;
+ *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS0_CONFIG)) = CONFIG_SYS_CS0_CFG;
if (SVR_MJREV (im->sysconf.spridr) >= 2) {
- *((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CFG_CS_ALETIMING;
+ *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CONFIG_SYS_CS_ALETIMING;
}
/*
* Enable clocks
@@ -120,8 +120,8 @@
*/
long int fixed_sdram (void)
{
- volatile immap_t *im = (immap_t *) CFG_IMMR;
- u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
u32 msize_log2 = __ilog2 (msize);
u32 i;
@@ -129,7 +129,7 @@
im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR;
/* Initialize DDR Local Window */
- im->sysconf.ddrlaw.bar = CFG_DDR_BASE & 0xFFFFF000;
+ im->sysconf.ddrlaw.bar = CONFIG_SYS_DDR_BASE & 0xFFFFF000;
im->sysconf.ddrlaw.ar = msize_log2 - 1;
/*
@@ -141,68 +141,68 @@
__asm__ __volatile__ ("isync");
/* Enable DDR */
- im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG_EN;
+ im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_EN;
/* Initialize DDR Priority Manager */
- im->mddrc.prioman_config1 = CFG_MDDRCGRP_PM_CFG1;
- im->mddrc.prioman_config2 = CFG_MDDRCGRP_PM_CFG2;
- im->mddrc.hiprio_config = CFG_MDDRCGRP_HIPRIO_CFG;
- im->mddrc.lut_table0_main_upper = CFG_MDDRCGRP_LUT0_MU;
- im->mddrc.lut_table0_main_lower = CFG_MDDRCGRP_LUT0_ML;
- im->mddrc.lut_table1_main_upper = CFG_MDDRCGRP_LUT1_MU;
- im->mddrc.lut_table1_main_lower = CFG_MDDRCGRP_LUT1_ML;
- im->mddrc.lut_table2_main_upper = CFG_MDDRCGRP_LUT2_MU;
- im->mddrc.lut_table2_main_lower = CFG_MDDRCGRP_LUT2_ML;
- im->mddrc.lut_table3_main_upper = CFG_MDDRCGRP_LUT3_MU;
- im->mddrc.lut_table3_main_lower = CFG_MDDRCGRP_LUT3_ML;
- im->mddrc.lut_table4_main_upper = CFG_MDDRCGRP_LUT4_MU;
- im->mddrc.lut_table4_main_lower = CFG_MDDRCGRP_LUT4_ML;
- im->mddrc.lut_table0_alternate_upper = CFG_MDDRCGRP_LUT0_AU;
- im->mddrc.lut_table0_alternate_lower = CFG_MDDRCGRP_LUT0_AL;
- im->mddrc.lut_table1_alternate_upper = CFG_MDDRCGRP_LUT1_AU;
- im->mddrc.lut_table1_alternate_lower = CFG_MDDRCGRP_LUT1_AL;
- im->mddrc.lut_table2_alternate_upper = CFG_MDDRCGRP_LUT2_AU;
- im->mddrc.lut_table2_alternate_lower = CFG_MDDRCGRP_LUT2_AL;
- im->mddrc.lut_table3_alternate_upper = CFG_MDDRCGRP_LUT3_AU;
- im->mddrc.lut_table3_alternate_lower = CFG_MDDRCGRP_LUT3_AL;
- im->mddrc.lut_table4_alternate_upper = CFG_MDDRCGRP_LUT4_AU;
- im->mddrc.lut_table4_alternate_lower = CFG_MDDRCGRP_LUT4_AL;
+ im->mddrc.prioman_config1 = CONFIG_SYS_MDDRCGRP_PM_CFG1;
+ im->mddrc.prioman_config2 = CONFIG_SYS_MDDRCGRP_PM_CFG2;
+ im->mddrc.hiprio_config = CONFIG_SYS_MDDRCGRP_HIPRIO_CFG;
+ im->mddrc.lut_table0_main_upper = CONFIG_SYS_MDDRCGRP_LUT0_MU;
+ im->mddrc.lut_table0_main_lower = CONFIG_SYS_MDDRCGRP_LUT0_ML;
+ im->mddrc.lut_table1_main_upper = CONFIG_SYS_MDDRCGRP_LUT1_MU;
+ im->mddrc.lut_table1_main_lower = CONFIG_SYS_MDDRCGRP_LUT1_ML;
+ im->mddrc.lut_table2_main_upper = CONFIG_SYS_MDDRCGRP_LUT2_MU;
+ im->mddrc.lut_table2_main_lower = CONFIG_SYS_MDDRCGRP_LUT2_ML;
+ im->mddrc.lut_table3_main_upper = CONFIG_SYS_MDDRCGRP_LUT3_MU;
+ im->mddrc.lut_table3_main_lower = CONFIG_SYS_MDDRCGRP_LUT3_ML;
+ im->mddrc.lut_table4_main_upper = CONFIG_SYS_MDDRCGRP_LUT4_MU;
+ im->mddrc.lut_table4_main_lower = CONFIG_SYS_MDDRCGRP_LUT4_ML;
+ im->mddrc.lut_table0_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT0_AU;
+ im->mddrc.lut_table0_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT0_AL;
+ im->mddrc.lut_table1_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT1_AU;
+ im->mddrc.lut_table1_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT1_AL;
+ im->mddrc.lut_table2_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT2_AU;
+ im->mddrc.lut_table2_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT2_AL;
+ im->mddrc.lut_table3_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT3_AU;
+ im->mddrc.lut_table3_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT3_AL;
+ im->mddrc.lut_table4_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT4_AU;
+ im->mddrc.lut_table4_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT4_AL;
/* Initialize MDDRC */
- im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG;
- im->mddrc.ddr_time_config0 = CFG_MDDRC_TIME_CFG0;
- im->mddrc.ddr_time_config1 = CFG_MDDRC_TIME_CFG1;
- im->mddrc.ddr_time_config2 = CFG_MDDRC_TIME_CFG2;
+ im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG;
+ im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0;
+ im->mddrc.ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1;
+ im->mddrc.ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2;
/* Initialize DDR */
for (i = 0; i < 10; i++)
- im->mddrc.ddr_command = CFG_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
- im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
- im->mddrc.ddr_command = CFG_MICRON_NOP;
- im->mddrc.ddr_command = CFG_MICRON_RFSH;
- im->mddrc.ddr_command = CFG_MICRON_NOP;
- im->mddrc.ddr_command = CFG_MICRON_RFSH;
- im->mddrc.ddr_command = CFG_MICRON_NOP;
- im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
- im->mddrc.ddr_command = CFG_MICRON_NOP;
- im->mddrc.ddr_command = CFG_MICRON_EM2;
- im->mddrc.ddr_command = CFG_MICRON_NOP;
- im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
- im->mddrc.ddr_command = CFG_MICRON_EM2;
- im->mddrc.ddr_command = CFG_MICRON_EM3;
- im->mddrc.ddr_command = CFG_MICRON_EN_DLL;
- im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
- im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
- im->mddrc.ddr_command = CFG_MICRON_RFSH;
- im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
- im->mddrc.ddr_command = CFG_MICRON_OCD_DEFAULT;
- im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
- im->mddrc.ddr_command = CFG_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM3;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EN_DLL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_OCD_DEFAULT;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
/* Start MDDRC */
- im->mddrc.ddr_time_config0 = CFG_MDDRC_TIME_CFG0_RUN;
- im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG_RUN;
+ im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0_RUN;
+ im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_RUN;
return msize;
}
@@ -292,8 +292,8 @@
int checkboard (void)
{
- ushort brd_rev = *(vu_short *) (CFG_CPLD_BASE + 0x00);
- uchar cpld_rev = *(vu_char *) (CFG_CPLD_BASE + 0x02);
+ ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00);
+ uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02);
printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
brd_rev, cpld_rev);
diff --git a/board/ads5121/ads5121_diu.c b/board/ads5121/ads5121_diu.c
index 26628d3..11450aa 100644
--- a/board/ads5121/ads5121_diu.c
+++ b/board/ads5121/ads5121_diu.c
@@ -43,7 +43,7 @@
void diu_set_pixel_clock(unsigned int pixclock)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile clk512x_t *clk = &immap->clk;
volatile unsigned int *clkdvdr = &clk->scfr[0];
unsigned long speed_ccb, temp, pixval;
@@ -100,7 +100,7 @@
}
U_BOOT_CMD(
- diufb, CFG_MAXARGS, 1, ads5121diu_init_show_bmp,
+ diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
"diufb init | addr - Init or Display BMP file\n",
"init\n - initialize DIU\n"
"addr\n - display bmp at address 'addr'\n"
diff --git a/board/ads5121/pci.c b/board/ads5121/pci.c
index a338604..b747e81 100644
--- a/board/ads5121/pci.c
+++ b/board/ads5121/pci.c
@@ -33,8 +33,8 @@
DECLARE_GLOBAL_DATA_PTR;
/* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
static struct pci_controller pci_hose;
@@ -46,7 +46,7 @@
void
pci_init_board(void)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile law512x_t *pci_law;
volatile pot512x_t *pci_pot;
volatile pcictrl512x_t *pci_ctrl;
@@ -87,10 +87,10 @@
/*
* Configure PCI Local Access Windows
*/
- pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
- pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M;
/*
@@ -98,18 +98,18 @@
*/
/* PCI mem space - prefetch */
- pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
pci_pot[0].pocmr = POCMR_EN | POCMR_PRE | POCMR_CM_256M;
/* PCI IO space */
- pci_pot[1].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[1].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[1].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[1].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M;
/* PCI mmio - non-prefetch mem space */
- pci_pot[2].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[2].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[2].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[2].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M;
/*
@@ -129,23 +129,23 @@
/* PCI memory prefetch space */
pci_set_region(hose->regions + 0,
- CFG_PCI_MEM_BASE,
- CFG_PCI_MEM_PHYS,
- CFG_PCI_MEM_SIZE,
+ CONFIG_SYS_PCI_MEM_BASE,
+ CONFIG_SYS_PCI_MEM_PHYS,
+ CONFIG_SYS_PCI_MEM_SIZE,
PCI_REGION_MEM|PCI_REGION_PREFETCH);
/* PCI memory space */
pci_set_region(hose->regions + 1,
- CFG_PCI_MMIO_BASE,
- CFG_PCI_MMIO_PHYS,
- CFG_PCI_MMIO_SIZE,
+ CONFIG_SYS_PCI_MMIO_BASE,
+ CONFIG_SYS_PCI_MMIO_PHYS,
+ CONFIG_SYS_PCI_MMIO_SIZE,
PCI_REGION_MEM);
/* PCI IO space */
pci_set_region(hose->regions + 2,
- CFG_PCI_IO_BASE,
- CFG_PCI_IO_PHYS,
- CFG_PCI_IO_SIZE,
+ CONFIG_SYS_PCI_IO_BASE,
+ CONFIG_SYS_PCI_IO_PHYS,
+ CONFIG_SYS_PCI_IO_SIZE,
PCI_REGION_IO);
/* System memory space */
@@ -158,8 +158,8 @@
hose->region_count = 4;
pci_setup_indirect(hose,
- (CFG_IMMR + 0x8300),
- (CFG_IMMR + 0x8304));
+ (CONFIG_SYS_IMMR + 0x8300),
+ (CONFIG_SYS_IMMR + 0x8304));
pci_register_hose(hose);
diff --git a/board/alaska/alaska.c b/board/alaska/alaska.c
index 49a8f71..33b4a6e 100644
--- a/board/alaska/alaska.c
+++ b/board/alaska/alaska.c
@@ -32,48 +32,48 @@
int blocksize = 0;
/* Flash 0 */
-#if defined (CFG_AMD_BOOT)
- batu = CFG_FLASH0_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
+#if defined (CONFIG_SYS_AMD_BOOT)
+ batu = CONFIG_SYS_FLASH0_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
#else
- batu = CFG_FLASH0_BASE | (BL_16M << 2) | BPP_RW | BPP_RX;
+ batu = CONFIG_SYS_FLASH0_BASE | (BL_16M << 2) | BPP_RW | BPP_RX;
#endif
- batl = CFG_FLASH0_BASE | 0x22;
+ batl = CONFIG_SYS_FLASH0_BASE | 0x22;
write_bat (IBAT0, batu, batl);
write_bat (DBAT0, batu, batl);
/* Flash 1 */
-#if defined (CFG_AMD_BOOT)
- batu = CFG_FLASH1_BASE | (BL_16M << 2) | BPP_RW | BPP_RX;
+#if defined (CONFIG_SYS_AMD_BOOT)
+ batu = CONFIG_SYS_FLASH1_BASE | (BL_16M << 2) | BPP_RW | BPP_RX;
#else
- batu = CFG_FLASH1_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
+ batu = CONFIG_SYS_FLASH1_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
#endif
- batl = CFG_FLASH1_BASE | 0x22;
+ batl = CONFIG_SYS_FLASH1_BASE | 0x22;
write_bat (IBAT1, batu, batl);
write_bat (DBAT1, batu, batl);
/* CPLD */
- batu = CFG_CPLD_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
- batl = CFG_CPLD_BASE | 0x22;
+ batu = CONFIG_SYS_CPLD_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
+ batl = CONFIG_SYS_CPLD_BASE | 0x22;
write_bat (IBAT2, 0, 0);
write_bat (DBAT2, batu, batl);
/* FPGA */
- batu = CFG_FPGA_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
- batl = CFG_FPGA_BASE | 0x22;
+ batu = CONFIG_SYS_FPGA_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
+ batl = CONFIG_SYS_FPGA_BASE | 0x22;
write_bat (IBAT3, 0, 0);
write_bat (DBAT3, batu, batl);
/* MBAR - Data only */
- batu = CFG_MBAR | BPP_RW | BPP_RX;
- batl = CFG_MBAR | 0x22;
+ batu = CONFIG_SYS_MBAR | BPP_RW | BPP_RX;
+ batl = CONFIG_SYS_MBAR | 0x22;
mtspr (IBAT4L, 0);
mtspr (IBAT4U, 0);
mtspr (DBAT4L, batl);
mtspr (DBAT4U, batu);
/* MBAR - SRAM */
- batu = CFG_SRAM_BASE | BPP_RW | BPP_RX;
- batl = CFG_SRAM_BASE | 0x42;
+ batu = CONFIG_SYS_SRAM_BASE | BPP_RW | BPP_RX;
+ batl = CONFIG_SYS_SRAM_BASE | 0x42;
mtspr (IBAT5L, batl);
mtspr (IBAT5U, batu);
mtspr (DBAT5L, batl);
@@ -93,8 +93,8 @@
blocksize = BL_256M << 2;
/* Memory */
- batu = CFG_SDRAM_BASE | blocksize | BPP_RW | BPP_RX;
- batl = CFG_SDRAM_BASE | 0x42;
+ batu = CONFIG_SYS_SDRAM_BASE | blocksize | BPP_RW | BPP_RX;
+ batl = CONFIG_SYS_SDRAM_BASE | 0x42;
mtspr (IBAT6L, batl);
mtspr (IBAT6U, batu);
mtspr (DBAT6L, batl);
@@ -120,9 +120,9 @@
else if (size <= 0x10000000) /* 256MB */
blocksize = BL_256M << 2;
- batu = (CFG_SDRAM_BASE +
+ batu = (CONFIG_SYS_SDRAM_BASE +
0x10000000) | blocksize | BPP_RW | BPP_RX;
- batl = (CFG_SDRAM_BASE + 0x10000000) | 0x42;
+ batl = (CONFIG_SYS_SDRAM_BASE + 0x10000000) | 0x42;
}
mtspr (IBAT7L, batl);
diff --git a/board/alaska/flash.c b/board/alaska/flash.c
index 556c168..aed3b6f 100644
--- a/board/alaska/flash.c
+++ b/board/alaska/flash.c
@@ -28,7 +28,7 @@
#include <linux/byteorder/swab.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* Board support for 1 or 2 flash devices */
#define FLASH_PORT_WIDTH8
@@ -86,30 +86,30 @@
ulong size = 0;
ulong fsize = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
memset (&flash_info[i], 0, sizeof (flash_info_t));
switch (i) {
case 0:
- flash_get_size ((FPW *) CFG_FLASH1_BASE,
+ flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE,
&flash_info[i]);
- flash_get_offsets (CFG_FLASH1_BASE, &flash_info[i]);
+ flash_get_offsets (CONFIG_SYS_FLASH1_BASE, &flash_info[i]);
break;
case 1:
- flash_get_size ((FPW *) CFG_FLASH1_BASE,
+ flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE,
&flash_info[i]);
- fsize = CFG_FLASH1_BASE + flash_info[i - 1].size;
+ fsize = CONFIG_SYS_FLASH1_BASE + flash_info[i - 1].size;
flash_get_offsets (fsize, &flash_info[i]);
break;
case 2:
- flash_get_size ((FPW *) CFG_FLASH0_BASE,
+ flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE,
&flash_info[i]);
- flash_get_offsets (CFG_FLASH0_BASE, &flash_info[i]);
+ flash_get_offsets (CONFIG_SYS_FLASH0_BASE, &flash_info[i]);
break;
case 3:
- flash_get_size ((FPW *) CFG_FLASH0_BASE,
+ flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE,
&flash_info[i]);
- fsize = CFG_FLASH0_BASE + flash_info[i - 1].size;
+ fsize = CONFIG_SYS_FLASH0_BASE + flash_info[i - 1].size;
flash_get_offsets (fsize, &flash_info[i]);
break;
default:
@@ -124,23 +124,23 @@
/* Protect monitor and environment sectors
*/
-#if defined (CFG_AMD_BOOT)
+#if defined (CONFIG_SYS_AMD_BOOT)
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[2]);
flash_protect (FLAG_PROTECT_SET,
- CFG_INTEL_BASE,
- CFG_INTEL_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_INTEL_BASE,
+ CONFIG_SYS_INTEL_BASE + monitor_flash_len - 1,
&flash_info[1]);
#else
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[3]);
flash_protect (FLAG_PROTECT_SET,
- CFG_AMD_BASE,
- CFG_AMD_BASE + monitor_flash_len - 1, &flash_info[0]);
+ CONFIG_SYS_AMD_BASE,
+ CONFIG_SYS_AMD_BASE + monitor_flash_len - 1, &flash_info[0]);
#endif
flash_protect (FLAG_PROTECT_SET,
@@ -294,10 +294,10 @@
break;
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
if (value == (FPW) INTEL_ID_28F128J3A)
@@ -348,7 +348,7 @@
/*
* first, wait for the WSM to be finished. The rationale for
* waiting for the WSM to become idle for at most
- * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+ * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy
* because of: (1) erase, (2) program or (3) lock bit
* configuration. So we just wait for the longest timeout of
* the (1)-(3), i.e. the erase timeout.
@@ -361,7 +361,7 @@
start = get_timer (0);
while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
- if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
*addr = (FPW) INTEL_RESET; /* restore read mode */
printf("WSM busy too long, can't get prot status\n");
return 1;
@@ -391,7 +391,7 @@
*/
static unsigned char same_chip_banks (int bank1, int bank2)
{
- unsigned char same_chip[CFG_MAX_FLASH_BANKS][CFG_MAX_FLASH_BANKS] = {
+ unsigned char same_chip[CONFIG_SYS_MAX_FLASH_BANKS][CONFIG_SYS_MAX_FLASH_BANKS] = {
{1, 1, 0, 0},
{1, 1, 0, 0},
{0, 0, 1, 1},
@@ -467,7 +467,7 @@
} else {
FPWV *base; /* first address in bank */
- base = (FPWV *) (CFG_AMD_BASE);
+ base = (FPWV *) (CONFIG_SYS_AMD_BASE);
base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */
base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */
base[FLASH_CYCLE1] = (FPW) 0x00800080; /* erase mode */
@@ -479,7 +479,7 @@
while (((status =
*addr) & (FPW) 0x00800080) !=
(FPW) 0x00800080) {
- if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
if (intel) {
*addr = (FPW) 0x00B000B0; /* suspend erase */
@@ -684,7 +684,7 @@
/* wait while polling the status register */
while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = (FPW) 0x00FF00FF; /* restore read mode */
return (1);
}
@@ -728,7 +728,7 @@
/* wait while polling the status register */
while ((*dstaddr & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*dstaddr = (FPW) 0x00FF00FF; /* restore read mode */
return (1);
}
@@ -746,7 +746,7 @@
/* wait while polling the status register */
while ((*dstaddr & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*dstaddr = (FPW) 0x00FF00FF; /* restore read mode */
return (1);
}
@@ -779,7 +779,7 @@
return (2);
}
- base = (FPWV *) (CFG_AMD_BASE);
+ base = (FPWV *) (CONFIG_SYS_AMD_BASE);
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
@@ -799,7 +799,7 @@
/* data polling for D7 */
while (res == 0
&& (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*dest = (FPW) 0x00F000F0; /* reset bank */
res = 1;
}
@@ -856,7 +856,7 @@
start = get_timer (0);
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
- if (get_timer (start) > CFG_FLASH_UNLOCK_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
printf ("Flash lock bit operation timed out\n");
rc = 1;
break;
@@ -886,17 +886,17 @@
*/
/* find the current bank number */
- curr_bank = CFG_MAX_FLASH_BANKS + 1;
- for (j = 0; j < CFG_MAX_FLASH_BANKS; ++j) {
+ curr_bank = CONFIG_SYS_MAX_FLASH_BANKS + 1;
+ for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; ++j) {
if (&flash_info[j] == info) {
curr_bank = j;
}
}
- if (curr_bank == CFG_MAX_FLASH_BANKS + 1) {
+ if (curr_bank == CONFIG_SYS_MAX_FLASH_BANKS + 1) {
printf("Error: can't determine bank number!\n");
}
- for (bank = 0; bank < CFG_MAX_FLASH_BANKS; ++bank) {
+ for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
if (!same_chip_banks(curr_bank, bank)) {
continue;
}
@@ -910,7 +910,7 @@
while ((*addr & INTEL_FINISHED) !=
INTEL_FINISHED) {
if (get_timer (start) >
- CFG_FLASH_UNLOCK_TOUT) {
+ CONFIG_SYS_FLASH_UNLOCK_TOUT) {
printf ("Flash lock bit operation timed out\n");
rc = 1;
break;
diff --git a/board/altera/common/AMDLV065D.c b/board/altera/common/AMDLV065D.c
index 8a7b14e..0fcf354 100644
--- a/board/altera/common/AMDLV065D.c
+++ b/board/altera/common/AMDLV065D.c
@@ -30,7 +30,7 @@
#endif
#define SECTSZ (64 * 1024)
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*----------------------------------------------------------------------*/
unsigned long flash_init (void)
@@ -39,18 +39,18 @@
unsigned long addr;
flash_info_t *fli = &flash_info[0];
- fli->size = CFG_FLASH_SIZE;
- fli->sector_count = CFG_MAX_FLASH_SECT;
+ fli->size = CONFIG_SYS_FLASH_SIZE;
+ fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
- addr = CFG_FLASH_BASE;
+ addr = CONFIG_SYS_FLASH_BASE;
for (i = 0; i < fli->sector_count; ++i) {
fli->start[i] = addr;
addr += SECTSZ;
fli->protect[i] = 1;
}
- return (CFG_FLASH_SIZE);
+ return (CONFIG_SYS_FLASH_SIZE);
}
/*--------------------------------------------------------------------*/
void flash_print_info (flash_info_t * info)
@@ -135,7 +135,7 @@
while ( readb (addr2) != 0xff) {
udelay (1000 * 1000);
putc ('.');
- if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("timeout\n");
return 1;
}
@@ -177,7 +177,7 @@
/* Verify write */
start = get_timer (0);
while (readb (dst) != b) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return 1;
}
}
diff --git a/board/altera/common/epled.c b/board/altera/common/epled.c
index c75fe8c..e5e7705 100644
--- a/board/altera/common/epled.c
+++ b/board/altera/common/epled.c
@@ -33,7 +33,7 @@
void __led_init (led_id_t mask, int state)
{
- nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+ nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
if (state == STATUS_LED_ON)
val &= ~mask;
@@ -44,7 +44,7 @@
void __led_set (led_id_t mask, int state)
{
- nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+ nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
if (state == STATUS_LED_ON)
val &= ~mask;
@@ -55,7 +55,7 @@
void __led_toggle (led_id_t mask)
{
- nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+ nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
val ^= mask;
writel (&pio->data, val);
diff --git a/board/altera/common/flash.c b/board/altera/common/flash.c
index 2638ea8..83bb7c2 100644
--- a/board/altera/common/flash.c
+++ b/board/altera/common/flash.c
@@ -25,7 +25,7 @@
#include <common.h>
#include <nios.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*--------------------------------------------------------------------*/
void flash_print_info (flash_info_t * info)
@@ -68,8 +68,8 @@
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
- volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *addr2;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
int prot, sect;
unsigned oldpri;
ulong start;
@@ -112,7 +112,7 @@
*/
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
*addr = 0xaa;
*addr = 0x55;
*addr = 0x80;
@@ -128,7 +128,7 @@
while (*addr2 != 0xff) {
udelay (1000 * 1000);
putc ('.');
- if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("timeout\n");
return 1;
}
@@ -181,7 +181,7 @@
/* Verify write */
start = get_timer (0);
while (*dst != b) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
ipri (oldpri);
return 1;
}
diff --git a/board/altera/dk1c20/dk1c20.c b/board/altera/dk1c20/dk1c20.c
index 46695be..11c19b7 100644
--- a/board/altera/dk1c20/dk1c20.c
+++ b/board/altera/dk1c20/dk1c20.c
@@ -58,9 +58,9 @@
#if defined(CONFIG_CMD_IDE)
int ide_preinit (void)
{
- nios_pio_t *present = (nios_pio_t *) CFG_CF_PRESENT;
- nios_pio_t *power = (nios_pio_t *) CFG_CF_POWER;
- nios_pio_t *atasel = (nios_pio_t *) CFG_CF_ATASEL;
+ nios_pio_t *present = (nios_pio_t *) CONFIG_SYS_CF_PRESENT;
+ nios_pio_t *power = (nios_pio_t *) CONFIG_SYS_CF_POWER;
+ nios_pio_t *atasel = (nios_pio_t *) CONFIG_SYS_CF_ATASEL;
/* setup data direction registers */
present->direction = NIOS_PIO_IN;
diff --git a/board/altera/dk1c20/flash.c b/board/altera/dk1c20/flash.c
index 1f344dd..8bddd38 100644
--- a/board/altera/dk1c20/flash.c
+++ b/board/altera/dk1c20/flash.c
@@ -31,7 +31,7 @@
#include "../common/flash.c"
/*----------------------------------------------------------------------*/
-#define BANKSZ CFG_FLASH_SIZE
+#define BANKSZ CONFIG_SYS_FLASH_SIZE
#define SECTSZ (64 * 1024)
#define USERFLASH (2 * 1024 * 1024) /* bottom 2 MB for user */
@@ -43,16 +43,16 @@
flash_info_t *fli = &flash_info[0];
fli->size = BANKSZ;
- fli->sector_count = CFG_MAX_FLASH_SECT;
+ fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
- addr = CFG_FLASH_BASE;
+ addr = CONFIG_SYS_FLASH_BASE;
for (i = 0; i < fli->sector_count; ++i) {
fli->start[i] = addr;
addr += SECTSZ;
/* Protect all but 2 MByte user area */
- if (addr < (CFG_FLASH_BASE + USERFLASH))
+ if (addr < (CONFIG_SYS_FLASH_BASE + USERFLASH))
fli->protect[i] = 0;
else
fli->protect[i] = 1;
diff --git a/board/altera/dk1s10/flash.c b/board/altera/dk1s10/flash.c
index 5c70933..d1f2db1 100644
--- a/board/altera/dk1s10/flash.c
+++ b/board/altera/dk1s10/flash.c
@@ -43,16 +43,16 @@
flash_info_t *fli = &flash_info[0];
fli->size = BANKSZ;
- fli->sector_count = CFG_MAX_FLASH_SECT;
+ fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
- addr = CFG_FLASH_BASE;
+ addr = CONFIG_SYS_FLASH_BASE;
for (i = 0; i < fli->sector_count; ++i) {
fli->start[i] = addr;
addr += SECTSZ;
/* Protect all but 2 MByte user area */
- if (addr < (CFG_FLASH_BASE + USERFLASH))
+ if (addr < (CONFIG_SYS_FLASH_BASE + USERFLASH))
fli->protect[i] = 0;
else
fli->protect[i] = 1;
diff --git a/board/altera/dk1s10/vectors.S b/board/altera/dk1s10/vectors.S
index 2f44875..226f65b 100644
--- a/board/altera/dk1s10/vectors.S
+++ b/board/altera/dk1s10/vectors.S
@@ -58,12 +58,12 @@
.align 4
_vectors:
-#if defined(CFG_NIOS_CPU_OCI_BASE)
+#if defined(CONFIG_SYS_NIOS_CPU_OCI_BASE)
/* OCI does the reset job */
.long _def_xhandler@h /* Vector 0 - NMI / Reset */
#else
/* there is no OCI, so we have to do a direct reset jump here */
- .long CFG_NIOS_CPU_RST_VECT /* Vector 0 - Reset to GERMS */
+ .long CONFIG_SYS_NIOS_CPU_RST_VECT /* Vector 0 - Reset to GERMS */
#endif
.long _cwp_lolimit@h /* Vector 1 - underflow */
.long _cwp_hilimit@h /* Vector 2 - overflow */
@@ -81,7 +81,7 @@
.long _def_xhandler@h /* Vector 13 - future reserved */
.long _def_xhandler@h /* Vector 14 - future reserved */
.long _def_xhandler@h /* Vector 15 - future reserved */
-#if (CFG_NIOS_TMRIRQ == 16)
+#if (CONFIG_SYS_NIOS_TMRIRQ == 16)
.long _timebase_int@h /* Vector 16 - lopri timer*/
#else
.long _def_xhandler@h /* Vector 16 */
@@ -119,7 +119,7 @@
.long _def_xhandler@h /* Vector 47 */
.long _def_xhandler@h /* Vector 48 */
.long _def_xhandler@h /* Vector 49 */
-#if (CFG_NIOS_TMRIRQ == 50)
+#if (CONFIG_SYS_NIOS_TMRIRQ == 50)
.long _timebase_int@h /* Vector 50 - lopri timer*/
#else
.long _def_xhandler@h /* Vector 50 */
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index 8b82ea4..8d79be2 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -31,24 +31,24 @@
/*
* GPIO0 setup (select GPIO or alternate function)
*/
- out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
- out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */
- out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
- out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */
- out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
- out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */
- out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */
+ out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
+ out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
+ out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
+ out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
+ out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
+ out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
+ out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
/*
* Ultra (405EZ) was nice enough to add another GPIO controller
*/
- out32(GPIO1_OSRH, CFG_GPIO1_OSRH); /* output select */
- out32(GPIO1_OSRL, CFG_GPIO1_OSRL);
- out32(GPIO1_ISR1H, CFG_GPIO1_ISR1H); /* input select */
- out32(GPIO1_ISR1L, CFG_GPIO1_ISR1L);
- out32(GPIO1_TSRH, CFG_GPIO1_TSRH); /* three-state select */
- out32(GPIO1_TSRL, CFG_GPIO1_TSRL);
- out32(GPIO1_TCR, CFG_GPIO1_TCR); /* enable output driver for outputs */
+ out32(GPIO1_OSRH, CONFIG_SYS_GPIO1_OSRH); /* output select */
+ out32(GPIO1_OSRL, CONFIG_SYS_GPIO1_OSRL);
+ out32(GPIO1_ISR1H, CONFIG_SYS_GPIO1_ISR1H); /* input select */
+ out32(GPIO1_ISR1L, CONFIG_SYS_GPIO1_ISR1L);
+ out32(GPIO1_TSRH, CONFIG_SYS_GPIO1_TSRH); /* three-state select */
+ out32(GPIO1_TSRL, CONFIG_SYS_GPIO1_TSRL);
+ out32(GPIO1_TCR, CONFIG_SYS_GPIO1_TCR); /* enable output driver for outputs */
}
int board_early_init_f(void)
@@ -68,7 +68,7 @@
mtsdr(sdrnand0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
mfsdr(sdrultra0, reg);
reg &= ~SDR_ULTRA0_CSN_MASK;
- reg |= (SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS) |
+ reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) |
SDR_ULTRA0_NDGPIOBP |
SDR_ULTRA0_EBCRDYEN |
SDR_ULTRA0_NFSRSTEN;
@@ -91,7 +91,7 @@
int misc_init_f(void)
{
/* Set EPLD to take PHY out of reset */
- out8(CFG_CPLD_BASE + 0x05, 0x00);
+ out8(CONFIG_SYS_CPLD_BASE + 0x05, 0x00);
udelay(100000);
return 0;
@@ -105,7 +105,7 @@
char *s = getenv("serial#");
u8 rev;
- rev = in8(CFG_CPLD_BASE + 0);
+ rev = in8(CONFIG_SYS_CPLD_BASE + 0);
printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev);
if (s != NULL) {
diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
index fb7ea35..052cf61 100644
--- a/board/amcc/acadia/cmd_acadia.c
+++ b/board/amcc/acadia/cmd_acadia.c
@@ -84,7 +84,7 @@
if (i2c_write(chip, 0, 1, buf, 16) != 0)
printf("Error writing to EEPROM at address 0x%x\n", chip);
- udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+ udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0)
printf("Error2 writing to EEPROM at address 0x%x\n", chip);
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
index 48a6725..3e5c80e 100644
--- a/board/amcc/acadia/memory.c
+++ b/board/amcc/acadia/memory.c
@@ -39,7 +39,7 @@
wr_val <<= 2;
/* set CRAM_CRE to 1 */
- gpio_write_bit(CFG_GPIO_CRAM_CRE, 1);
+ gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 1);
/* Write BCR to CRAM on CS1 */
out32(wr_val + 0x00200000, 0);
@@ -53,7 +53,7 @@
eieio();
/* set CRAM_CRE back to 0 (normal operation) */
- gpio_write_bit(CFG_GPIO_CRAM_CRE, 0);
+ gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 0);
return;
}
@@ -75,10 +75,10 @@
u32 val;
/* 1. EBC need to program READY, CLK, ADV for ASync mode */
- gpio_config(CFG_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
- gpio_config(CFG_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
- gpio_config(CFG_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
- gpio_config(CFG_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG);
+ gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
+ gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
+ gpio_config(CONFIG_SYS_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
+ gpio_config(CONFIG_SYS_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG);
/* 2. EBC in Async mode */
mtebc(pb1ap, 0x078F1EC0);
@@ -94,8 +94,8 @@
mtebc(pb2ap, 0x9C0201C0);
/* Set GPIO pins back to alternate function */
- gpio_config(CFG_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
- gpio_config(CFG_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
+ gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
+ gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
/* Config EBC to use RDY */
mfsdr(sdrultra0, val);
@@ -106,5 +106,5 @@
;
#endif
- return (CFG_MBYTES_RAM << 20);
+ return (CONFIG_SYS_MBYTES_RAM << 20);
}
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index f415701..febc61a 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -462,7 +462,7 @@
return dram_size;
#else
- return CFG_MBYTES_SDRAM << 20;
+ return CONFIG_SYS_MBYTES_SDRAM << 20;
#endif
}
@@ -529,7 +529,7 @@
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
/*--------------------------------------------------------------------------+
@@ -543,14 +543,14 @@
| Make this region non-prefetchable.
+--------------------------------------------------------------------------*/
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
- out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
- out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
- out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
- out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
@@ -565,8 +565,8 @@
/* Program the board's subsystem id/vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
- CFG_PCI_SUBSYS_VENDORID);
- pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+ CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
/* Configure command register as bus master */
pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
@@ -580,13 +580,13 @@
pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
/*************************************************************************
* pci_master_init
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
@@ -601,7 +601,7 @@
temp_short | PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
/*************************************************************************
* is_pci_host
diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk
index b46527d..a37636a 100644
--- a/board/amcc/bamboo/config.mk
+++ b/board/amcc/bamboo/config.mk
@@ -34,5 +34,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c
index d004ed7..001348a 100644
--- a/board/amcc/bamboo/flash.c
+++ b/board/amcc/bamboo/flash.c
@@ -45,12 +45,12 @@
#define DEBUGF(x...)
#endif /* DEBUG */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*
* Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
*/
-static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = {
{0x87800001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */
{0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66 */
{0x87800001, 0x00000000, 0x00000000}, /* 0:boot from nand flash */
@@ -79,7 +79,7 @@
unsigned long flash_init(void)
{
unsigned long total_b = 0;
- unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
unsigned short index = 0;
int i;
unsigned long val;
@@ -128,7 +128,7 @@
DEBUGF("FLASH: Index: %d\n", index);
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
@@ -150,8 +150,8 @@
}
/* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
&flash_info[i]);
#if defined(CONFIG_ENV_IS_IN_FLASH)
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S
index f4d2ae3..a5c9d6d 100644
--- a/board/amcc/bamboo/init.S
+++ b/board/amcc/bamboo/init.S
@@ -48,29 +48,29 @@
* speed up boot process. It is patched after relocation to enable SA_I
*/
#ifndef CONFIG_NAND_SPL
- tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+ tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
#else
- tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 0, AC_R|AC_W|AC_X|SA_G)
- tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 0, AC_R|AC_W|AC_X|SA_G)
+ tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
#endif
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
- tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+ tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
/* PCI base & peripherals */
- tlbentry(CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
- tlbentry(CFG_NAND_ADDR, SZ_4K, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
+ tlbentry(CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
+ tlbentry(CONFIG_SYS_NAND_ADDR, SZ_4K, CONFIG_SYS_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
/* PCI */
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I)
/* USB 2.0 Device */
- tlbentry(CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_USB_DEVICE, SZ_1K, CONFIG_SYS_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
@@ -79,8 +79,8 @@
* For NAND booting the first TLB has to be reconfigured to full size
* and with caching disabled after running from RAM!
*/
-#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 0)
+#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 0)
#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
.globl reconfig_tlb0
diff --git a/board/amcc/bubinga/flash.c b/board/amcc/bubinga/flash.c
index d71cc29..a10babb 100644
--- a/board/amcc/bubinga/flash.c
+++ b/board/amcc/bubinga/flash.c
@@ -32,7 +32,7 @@
#include <ppc4xx.h>
#include <asm/processor.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
#undef DEBUG
#ifdef DEBUG
@@ -60,7 +60,7 @@
unsigned long base_b0, base_b1;
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -75,14 +75,14 @@
}
/* Only one bank */
- if (CFG_MAX_FLASH_BANKS == 1) {
+ if (CONFIG_SYS_MAX_FLASH_BANKS == 1) {
/* Setup offsets */
flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
&flash_info[0]);
#ifdef CONFIG_ENV_IS_IN_FLASH
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
@@ -133,7 +133,7 @@
/* monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - CONFIG_SYS_MONITOR_LEN,
base_b0 + size_b0 - 1, &flash_info[0]);
/* Also protect sector containing initial power-up instruction */
/* (flash_protect() checks address range - other call ignored) */
@@ -151,12 +151,12 @@
/* monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- base_b1 + size_b1 - CFG_MONITOR_LEN,
+ base_b1 + size_b1 - CONFIG_SYS_MONITOR_LEN,
base_b1 + size_b1 - 1,
&flash_info[1]);
/* monitor protection OFF by default (one is enough) */
(void)flash_protect(FLAG_PROTECT_CLEAR,
- base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - CONFIG_SYS_MONITOR_LEN,
base_b0 + size_b0 - 1,
&flash_info[0]);
} else {
diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c
index 1d125b6..6b74743 100644
--- a/board/amcc/canyonlands/bootstrap.c
+++ b/board/amcc/canyonlands/bootstrap.c
@@ -168,7 +168,7 @@
if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);
- udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+ udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
printf("Done\n");
printf("Please power-cycle the board for the changes to take effect\n");
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 47667ee..e9186f8 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -29,11 +29,11 @@
#include <asm/4xx_pcie.h>
#include <asm/gpio.h>
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
DECLARE_GLOBAL_DATA_PTR;
-#define CFG_BCSR3_PCIE 0x10
+#define CONFIG_SYS_BCSR3_PCIE 0x10
#define BOARD_CANYONLANDS_PCIE 1
#define BOARD_CANYONLANDS_SATA 2
@@ -86,7 +86,7 @@
SDR0_CUST0_NDFC_BW_8_BIT |
SDR0_CUST0_NDFC_ARE_MASK |
SDR0_CUST0_NDFC_BAC_ENCODE(3) |
- (0x80000000 >> (28 + CFG_NAND_CS));
+ (0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
mtsdr(SDR0_CUST0, sdr0_cust0);
/*
@@ -99,13 +99,13 @@
mtsdr(SDR0_PCI0, 0xe0000000);
/* Enable ethernet and take out of reset */
- out_8((void *)CFG_BCSR_BASE + 6, 0);
+ out_8((void *)CONFIG_SYS_BCSR_BASE + 6, 0);
/* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */
- out_8((void *)CFG_BCSR_BASE + 5, 0);
+ out_8((void *)CONFIG_SYS_BCSR_BASE + 5, 0);
/* Enable USB host & USB-OTG */
- out_8((void *)CFG_BCSR_BASE + 7, 0);
+ out_8((void *)CONFIG_SYS_BCSR_BASE + 7, 0);
mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */
@@ -158,7 +158,7 @@
gd->board_type = BOARD_GLACIER;
} else {
printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board");
- if (in_8((void *)(CFG_BCSR_BASE + 3)) & CFG_BCSR3_PCIE)
+ if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 3)) & CONFIG_SYS_BCSR3_PCIE)
gd->board_type = BOARD_CANYONLANDS_PCIE;
else
gd->board_type = BOARD_CANYONLANDS_SATA;
@@ -175,7 +175,7 @@
break;
}
- printf(", Rev. %X", in_8((void *)(CFG_BCSR_BASE + 0)));
+ printf(", Rev. %X", in_8((void *)(CONFIG_SYS_BCSR_BASE + 0)));
if (s != NULL) {
puts(", serial# ");
@@ -208,7 +208,7 @@
*/
phys_size_t initdram(int board_type)
{
- return CFG_MBYTES_SDRAM << 20;
+ return CONFIG_SYS_MBYTES_SDRAM << 20;
}
#endif
@@ -219,7 +219,7 @@
* inbound map (PIM). But the bootstrap config choices are limited and
* may not be sufficient for a given board.
*/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
/*
@@ -234,7 +234,7 @@
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
* strapping options to not support sizes such as 128/256 MB.
*/
- out_le32((void *)PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+ out_le32((void *)PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
out_le32((void *)PCIX0_PIM0LAH, 0);
out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
out_le32((void *)PCIX0_BAR0, 0);
@@ -242,12 +242,12 @@
/*
* Program the board's subsystem id/vendor id
*/
- out_le16((void *)PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
- out_le16((void *)PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
+ out_le16((void *)PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ out_le16((void *)PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
out_le16((void *)PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
#if defined(CONFIG_PCI)
/*
@@ -314,9 +314,9 @@
/* setup mem resource */
pci_set_region(hose->regions + 0,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMSIZE,
PCI_REGION_MEM);
hose->region_count = 1;
pci_register_hose(hose);
@@ -362,16 +362,16 @@
/* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
- mtebc(pb3cr, CFG_FLASH_BASE_PHYS_L | 0xda000);
+ mtebc(pb3cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
#else
- mtebc(pb0cr, CFG_FLASH_BASE_PHYS_L | 0xda000);
+ mtebc(pb0cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
#endif
/* Remove TLB entry of boot EBC mapping */
- remove_tlb(CFG_BOOT_BASE_ADDR, 16 << 20);
+ remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
/* Add TLB entry for 0xfc00.0000 -> 0x4.cc00.0000 */
- program_tlb(CFG_FLASH_BASE_PHYS, CFG_FLASH_BASE, CFG_FLASH_SIZE,
+ program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE,
TLB_WORD2_I_ENABLE);
/*
@@ -427,9 +427,9 @@
* Disable square wave output: Batterie will be drained
* quickly, when this output is not disabled
*/
- val = i2c_reg_read(CFG_I2C_RTC_ADDR, 0xa);
+ val = i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, 0xa);
val &= ~0x40;
- i2c_reg_write(CFG_I2C_RTC_ADDR, 0xa, val);
+ i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0xa, val);
return 0;
}
@@ -445,7 +445,7 @@
/* Fixup NOR mapping */
val[0] = 0; /* chip select number */
val[1] = 0; /* always 0 */
- val[2] = CFG_FLASH_BASE_PHYS_L; /* we fixed up this address */
+ val[2] = CONFIG_SYS_FLASH_BASE_PHYS_L; /* we fixed up this address */
val[3] = gd->bd->bi_flashsize;
rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
val, sizeof(val), 1);
diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk
index 2330cae..551a817 100644
--- a/board/amcc/canyonlands/config.mk
+++ b/board/amcc/canyonlands/config.mk
@@ -37,5 +37,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S
index 258fb5d..179dd32 100644
--- a/board/amcc/canyonlands/init.S
+++ b/board/amcc/canyonlands/init.S
@@ -47,10 +47,10 @@
* enable SA_I
*/
#ifndef CONFIG_NAND_SPL
- tlbentry(CFG_BOOT_BASE_ADDR, SZ_16M, CFG_BOOT_BASE_ADDR, 4, AC_R|AC_W|AC_X|SA_G) /* TLB 0 */
+ tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_R|AC_W|AC_X|SA_G) /* TLB 0 */
#else
- tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 4, AC_R|AC_W|AC_X|SA_G)
- tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 4, AC_R|AC_W|AC_X|SA_G)
+ tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
tlbentry(256 << 20, SZ_256M, 256 << 20, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
#endif
@@ -60,37 +60,37 @@
* routine.
*/
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
- tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+ tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
#endif
- tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
/* PCIe UTL register */
- tlbentry(CFG_PCIE_BASE, SZ_16K, 0x08010000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xC, AC_R|AC_W|SA_G|SA_I)
/* TLB-entry for NAND */
- tlbentry(CFG_NAND_ADDR, SZ_16M, CFG_NAND_ADDR, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_NAND_ADDR, SZ_16M, CONFIG_SYS_NAND_ADDR, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
/* TLB-entry for CPLD */
- tlbentry(CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 4, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_BCSR_BASE, SZ_1K, CONFIG_SYS_BCSR_BASE, 4, AC_R|AC_W|SA_G|SA_I)
/* TLB-entry for OCM */
- tlbentry(CFG_OCM_BASE, SZ_16K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CONFIG_SYS_OCM_BASE, SZ_16K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
/* TLB-entry for Local Configuration registers => peripherals */
- tlbentry(CFG_LOCAL_CONF_REGS, SZ_16M, CFG_LOCAL_CONF_REGS, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
/* AHB: Internal USB Peripherals (USB, SATA) */
- tlbentry(CFG_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
tlbtab_end
@@ -99,8 +99,8 @@
* For NAND booting the first TLB has to be reconfigured to full size
* and with caching disabled after running from RAM!
*/
-#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
.globl reconfig_tlb0
diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c
index eba0511..9943c74 100644
--- a/board/amcc/common/flash.c
+++ b/board/amcc/common/flash.c
@@ -35,13 +35,13 @@
#include <ppc4xx.h>
#include <asm/processor.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
*/
static int write_word(flash_info_t * info, ulong dest, ulong data);
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
static int write_word_1(flash_info_t * info, ulong dest, ulong data);
static int write_word_2(flash_info_t * info, ulong dest, ulong data);
static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
@@ -171,7 +171,7 @@
/*
* The following code cannot be run from FLASH!
*/
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
static ulong flash_get_size(vu_long * addr, flash_info_t * info)
{
/* bit 0 used for big flash marking */
@@ -188,32 +188,32 @@
#endif
{
short i;
- CFG_FLASH_WORD_SIZE value;
+ CONFIG_SYS_FLASH_WORD_SIZE value;
ulong base = (ulong) addr;
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
/* Write auto select command: read Manufacturer ID */
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
udelay(1000);
value = addr2[0];
DEBUGF("FLASH MANUFACT: %x\n", value);
switch (value) {
- case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
- case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
break;
- case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
- case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
info->flash_id = FLASH_MAN_STM;
break;
default:
@@ -227,67 +227,67 @@
DEBUGF("\nFLASH DEVICEID: %x\n", value);
switch (value) {
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 KiB */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 KiB */
break;
- case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) STM_ID_M29W040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 KiB */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F016D:
info->flash_id += FLASH_AMD016;
info->sector_count = 32;
info->size = 0x00200000; /* => 2 MiB */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV033C:
info->flash_id += FLASH_AMDLV033C;
info->sector_count = 64;
info->size = 0x00400000; /* => 4 MiB */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400T:
info->flash_id += FLASH_AM400T;
info->sector_count = 11;
info->size = 0x00080000; /* => 512 KiB */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400B:
info->flash_id += FLASH_AM400B;
info->sector_count = 11;
info->size = 0x00080000; /* => 512 KiB */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800T:
info->flash_id += FLASH_AM800T;
info->sector_count = 19;
info->size = 0x00100000; /* => 1 MiB */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800B:
info->flash_id += FLASH_AM800B;
info->sector_count = 19;
info->size = 0x00100000; /* => 1 MiB */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160T:
info->flash_id += FLASH_AM160T;
info->sector_count = 35;
info->size = 0x00200000; /* => 2 MiB */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160B:
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
info->size = 0x00200000; /* => 2 MiB */
@@ -331,14 +331,14 @@
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
- addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+ addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
/* For AMD29033C flash we need to resend the command of *
* reading flash protection for upper 8 Mb of flash */
if (i == 32) {
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
}
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -348,7 +348,7 @@
}
/* issue bank reset to return to read mode */
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
return (info->size);
}
@@ -356,14 +356,14 @@
static int wait_for_DQ7_1(flash_info_t * info, int sect)
{
ulong start, now, last;
- volatile CFG_FLASH_WORD_SIZE *addr =
- (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+ (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
start = get_timer(0);
last = start;
- while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
- (CFG_FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+ (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Timeout\n");
return -1;
}
@@ -376,7 +376,7 @@
return 0;
}
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
int flash_erase(flash_info_t * info, int s_first, int s_last)
{
if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
@@ -394,8 +394,8 @@
int flash_erase(flash_info_t * info, int s_first, int s_last)
#endif
{
- volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *addr2;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
int flag, prot, sect, l_sect;
int i;
@@ -435,24 +435,24 @@
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050; /* block erase */
for (i = 0; i < 50; i++)
udelay(1000); /* wait 1 ms */
} else {
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
}
l_sect = sect;
/*
@@ -474,8 +474,8 @@
udelay(1000);
/* reset to read mode */
- addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+ addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
printf(" done\n");
return 0;
@@ -557,7 +557,7 @@
* 1 - write timeout
* 2 - Flash not erased
*/
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
static int write_word(flash_info_t * info, ulong dest, ulong data)
{
if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
@@ -575,9 +575,9 @@
static int write_word(flash_info_t * info, ulong dest, ulong data)
#endif
{
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
- volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
ulong start;
int i;
@@ -586,15 +586,15 @@
return (2);
}
- for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
int flag;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
dest2[i] = data2[i];
@@ -604,10 +604,10 @@
/* data polling for D7 */
start = get_timer(0);
- while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+ while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
@@ -616,10 +616,10 @@
return (0);
}
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-#undef CFG_FLASH_WORD_SIZE
-#define CFG_FLASH_WORD_SIZE unsigned short
+#undef CONFIG_SYS_FLASH_WORD_SIZE
+#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short
/*
* The following code cannot be run from FLASH!
@@ -628,35 +628,35 @@
{
short i;
int n;
- CFG_FLASH_WORD_SIZE value;
+ CONFIG_SYS_FLASH_WORD_SIZE value;
ulong base = (ulong) addr;
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
/* Write auto select command: read Manufacturer ID */
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
udelay(1000);
value = addr2[0];
DEBUGF("FLASH MANUFACT: %x\n", value);
switch (value) {
- case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
- case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
break;
- case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
- case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
info->flash_id = FLASH_MAN_STM;
break;
- case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) MX_MANUFACT:
info->flash_id = FLASH_MAN_MX;
break;
default:
@@ -672,22 +672,22 @@
switch (value) {
- case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
info->flash_id += FLASH_AM320T;
info->sector_count = 71;
info->size = 0x00400000; break; /* => 4 MiB */
- case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
info->flash_id += FLASH_AM320B;
info->sector_count = 71;
info->size = 0x00400000; break; /* => 4 MiB */
- case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE)STM_ID_29W320DT:
info->flash_id += FLASH_STMW320DT;
info->sector_count = 67;
info->size = 0x00400000; break; /* => 4 MiB */
- case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE)MX_ID_LV320T:
info->flash_id += FLASH_MXLV320T;
info->sector_count = 71;
info->size = 0x00400000;
@@ -776,14 +776,14 @@
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
- addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+ addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
/* For AMD29033C flash we need to resend the command of *
* reading flash protection for upper 8 Mb of flash */
if (i == 32) {
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
}
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -793,7 +793,7 @@
}
/* issue bank reset to return to read mode */
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
return (info->size);
}
@@ -801,14 +801,14 @@
static int wait_for_DQ7_2(flash_info_t * info, int sect)
{
ulong start, now, last;
- volatile CFG_FLASH_WORD_SIZE *addr =
- (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+ (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
start = get_timer(0);
last = start;
- while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
- (CFG_FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+ (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Timeout\n");
return -1;
}
@@ -823,8 +823,8 @@
static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
{
- volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *addr2;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
int flag, prot, sect, l_sect;
int i;
@@ -864,24 +864,24 @@
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050; /* block erase */
for (i = 0; i < 50; i++)
udelay(1000); /* wait 1 ms */
} else {
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
}
l_sect = sect;
/*
@@ -903,8 +903,8 @@
udelay(1000);
/* reset to read mode */
- addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+ addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
printf(" done\n");
return 0;
@@ -912,9 +912,9 @@
static int write_word_2(flash_info_t * info, ulong dest, ulong data)
{
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
- volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
ulong start;
int i;
@@ -923,15 +923,15 @@
return (2);
}
- for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
int flag;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
dest2[i] = data2[i];
@@ -941,10 +941,10 @@
/* data polling for D7 */
start = get_timer(0);
- while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+ while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
@@ -952,4 +952,4 @@
return (0);
}
-#endif /* CFG_FLASH_2ND_16BIT_DEV */
+#endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */
diff --git a/board/amcc/ebony/config.mk b/board/amcc/ebony/config.mk
index e5722dd..60d3bf4 100644
--- a/board/amcc/ebony/config.mk
+++ b/board/amcc/ebony/config.mk
@@ -40,5 +40,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c
index 9bcdf59..ad09e62 100644
--- a/board/amcc/ebony/ebony.c
+++ b/board/amcc/ebony/ebony.c
@@ -35,7 +35,7 @@
int board_early_init_f(void)
{
uint reg;
- unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+ unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE;
unsigned char status;
/*--------------------------------------------------------------------
@@ -204,7 +204,7 @@
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
/*--------------------------------------------------------------------------+
@@ -219,7 +219,7 @@
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
* options to not support sizes such as 128/256 MB.
*--------------------------------------------------------------------------*/
- out32r(PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+ out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
out32r(PCIX0_PIM0LAH, 0);
out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
@@ -228,12 +228,12 @@
/*--------------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*--------------------------------------------------------------------------*/
- out16r(PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
- out16r(PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
+ out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
/*************************************************************************
* is_pci_host
diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c
index d9c6974..8fe3ba1 100644
--- a/board/amcc/ebony/flash.c
+++ b/board/amcc/ebony/flash.c
@@ -50,7 +50,7 @@
#define FLASH_ONBD_N_VAL 2
#define FLASH_SRAM_SEL_VAL 1
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
{0xffc00000, 0xffe00000, 0xff880000}, /* 0:000: configuraton 3 */
{0xffc00000, 0xffe00000, 0xff800000}, /* 1:001: configuraton 4 */
{0xffc00000, 0xffe00000, 0x00000000}, /* 2:010: configuraton 7 */
@@ -74,8 +74,8 @@
unsigned long flash_init(void)
{
unsigned long total_b = 0;
- unsigned long size_b[CFG_MAX_FLASH_BANKS];
- unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+ unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
+ unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE;
unsigned char switch_status;
unsigned short index = 0;
int i;
@@ -98,7 +98,7 @@
DEBUGF("FLASH: Index: %d\n", index);
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
@@ -121,8 +121,8 @@
}
/* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
&flash_info[2]);
#ifdef CONFIG_ENV_IS_IN_FLASH
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
diff --git a/board/amcc/ebony/init.S b/board/amcc/ebony/init.S
index c86076e..811a96a 100644
--- a/board/amcc/ebony/init.S
+++ b/board/amcc/ebony/init.S
@@ -49,9 +49,9 @@
* routine.
*/
- tlbentry(CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
- tlbentry(CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
- tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
diff --git a/board/amcc/katmai/config.mk b/board/amcc/katmai/config.mk
index c512b53..ef0cf96 100644
--- a/board/amcc/katmai/config.mk
+++ b/board/amcc/katmai/config.mk
@@ -34,5 +34,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S
index e3f3da6..1c74a82 100644
--- a/board/amcc/katmai/init.S
+++ b/board/amcc/katmai/init.S
@@ -59,20 +59,20 @@
* routine.
*/
- tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
- tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
/**************************************************************************
@@ -99,20 +99,20 @@
* routine.
*/
- tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
- tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_ACE_BASE, SZ_1K, CFG_ACE_BASE, 4,AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_ACE_BASE, SZ_1K, CONFIG_SYS_ACE_BASE, 4,AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index 172b581..b6c0c11 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -224,11 +224,11 @@
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
mtsdr(sdr_mfr, mfr);
- mtsdr(SDR0_PFC0, CFG_PFC0);
+ mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0);
- out32(GPIO0_OR, CFG_GPIO_OR);
- out32(GPIO0_ODR, CFG_GPIO_ODR);
- out32(GPIO0_TCR, CFG_GPIO_TCR);
+ out32(GPIO0_OR, CONFIG_SYS_GPIO_OR);
+ out32(GPIO0_ODR, CONFIG_SYS_GPIO_ODR);
+ out32(GPIO0_TCR, CONFIG_SYS_GPIO_TCR);
return 0;
}
@@ -298,7 +298,7 @@
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
/*-------------------------------------------------------------------+
@@ -313,7 +313,7 @@
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
* strapping options to not support sizes such as 128/256 MB.
*-------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
out32r( PCIX0_PIM0LAH, 0 );
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
out32r( PCIX0_BAR0, 0 );
@@ -321,12 +321,12 @@
/*-------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*-------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+ out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
#if defined(CONFIG_PCI)
/*************************************************************************
@@ -357,11 +357,11 @@
val = in32(GPIO0_IR);
switch (port) {
case 0:
- return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT0));
+ return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0));
case 1:
- return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT1));
+ return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1));
case 2:
- return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT2));
+ return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2));
default:
return 0;
}
@@ -404,9 +404,9 @@
/* setup mem resource */
pci_set_region(hose->regions + 0,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMSIZE,
PCI_REGION_MEM);
hose->region_count = 1;
pci_register_hose(hose);
diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c
index 0d2f27f..0f571fe 100644
--- a/board/amcc/kilauea/cmd_pll.c
+++ b/board/amcc/kilauea/cmd_pll.c
@@ -48,7 +48,7 @@
do { \
int __i; \
for (__i = 0; __i < 2; __i++) \
- eeprom_write (CFG_I2C_EEPROM_ADDR, \
+ eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, \
EEPROM_CONF_OFFSET + __i*BUF_STEP, \
pll_select[freq], \
BUF_STEP + __i*BUF_STEP); \
@@ -151,7 +151,7 @@
uchar buffer[EEPROM_SDSTP_PARAM];
memset(buffer, 0, sizeof(buffer));
- eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+ eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off,
buffer, EEPROM_SDSTP_PARAM);
printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
@@ -168,9 +168,9 @@
/*
* Write twice, 8 bytes per write
*/
- eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+ eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
testbuf, 8);
- eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+ eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
testbuf, 16);
printf("done\n");
@@ -236,7 +236,7 @@
}
U_BOOT_CMD(
- pllalter, CFG_MAXARGS, 1, do_pll_alter,
+ pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter,
"pllalter- change pll frequence \n",
"pllalter <selection> - change pll frequence \n\n\
** New freq take effect after reset. ** \n\
diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c
index f407e19..7e84a61 100644
--- a/board/amcc/kilauea/kilauea.c
+++ b/board/amcc/kilauea/kilauea.c
@@ -36,7 +36,7 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*
* Board early initialization function
@@ -197,7 +197,7 @@
SDR0_CUST0_NDFC_ENABLE |
SDR0_CUST0_NDFC_BW_8_BIT |
SDR0_CUST0_NRB_BUSY |
- (0x80000000 >> (28 + CFG_NAND_CS));
+ (0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
mtsdr(SDR0_CUST0, val);
/*
@@ -210,9 +210,9 @@
/*
* Configure FPGA register with PCIe reset
*/
- out_be32((void *)CFG_FPGA_BASE, 0xff570cc4); /* assert PCIe reset */
+ out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc4); /* assert PCIe reset */
mdelay(50);
- out_be32((void *)CFG_FPGA_BASE, 0xff570cc7); /* deassert PCIe reset */
+ out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc7); /* deassert PCIe reset */
return 0;
}
@@ -222,7 +222,7 @@
#ifdef CONFIG_ENV_IS_IN_FLASH
/* Monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
+ -CONFIG_SYS_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
#endif
@@ -330,9 +330,9 @@
/* setup mem resource */
pci_set_region(hose->regions + 0,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMSIZE,
PCI_REGION_MEM);
hose->region_count = 1;
pci_register_hose(hose);
diff --git a/board/amcc/luan/config.mk b/board/amcc/luan/config.mk
index f52c206..cd02aab 100644
--- a/board/amcc/luan/config.mk
+++ b/board/amcc/luan/config.mk
@@ -40,5 +40,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/luan/flash.c b/board/amcc/luan/flash.c
index d28bf9d..2d3b154 100644
--- a/board/amcc/luan/flash.c
+++ b/board/amcc/luan/flash.c
@@ -42,7 +42,7 @@
#define DEBUGF(x...)
#endif /* DEBUG */
-static unsigned long flash_addr_table[1][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[1][CONFIG_SYS_MAX_FLASH_BANKS] = {
{0xff900000, 0xff980000, 0xffc00000}, /* 0:000: configuraton 3 */
};
@@ -59,7 +59,7 @@
unsigned long flash_init(void)
{
unsigned long total_b = 0;
- unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
unsigned short index = 0;
int i;
@@ -69,7 +69,7 @@
DEBUGF("FLASH: Index: %d\n", index);
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
@@ -92,8 +92,8 @@
}
/* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
&flash_info[2]);
#ifdef CONFIG_ENV_IS_IN_FLASH
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
diff --git a/board/amcc/luan/init.S b/board/amcc/luan/init.S
index d5ee117..fb54dea 100644
--- a/board/amcc/luan/init.S
+++ b/board/amcc/luan/init.S
@@ -54,7 +54,7 @@
tlbentry(0xffd00000, SZ_1M, 0xffd00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
tlbentry(0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
tlbentry(0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I)
/*
* TLB entries for SDRAM are not needed on this platform.
@@ -63,12 +63,12 @@
*/
/* internal ram (l2 cache) */
- tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I)
/* peripherals at f0000000 */
- tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, CFG_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, CONFIG_SYS_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I)
/* PCI */
- tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index b14b6e1..b28ebf9 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -30,7 +30,7 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*************************************************************************
@@ -80,7 +80,7 @@
************************************************************************/
int misc_init_r(void)
{
- volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
+ volatile epld_t *x = (epld_t *) CONFIG_SYS_EPLD_BASE;
/* set modes of operation */
x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 |
@@ -166,7 +166,7 @@
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
/*--------------------------------------------------------------------------+
@@ -181,7 +181,7 @@
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
* options to not support sizes such as 128/256 MB.
*--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
out32r( PCIX0_PIM0LAH, 0 );
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
@@ -190,12 +190,12 @@
/*--------------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*--------------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+ out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
/*************************************************************************
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
index 0d2f27f..0f571fe 100644
--- a/board/amcc/makalu/cmd_pll.c
+++ b/board/amcc/makalu/cmd_pll.c
@@ -48,7 +48,7 @@
do { \
int __i; \
for (__i = 0; __i < 2; __i++) \
- eeprom_write (CFG_I2C_EEPROM_ADDR, \
+ eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, \
EEPROM_CONF_OFFSET + __i*BUF_STEP, \
pll_select[freq], \
BUF_STEP + __i*BUF_STEP); \
@@ -151,7 +151,7 @@
uchar buffer[EEPROM_SDSTP_PARAM];
memset(buffer, 0, sizeof(buffer));
- eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+ eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off,
buffer, EEPROM_SDSTP_PARAM);
printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
@@ -168,9 +168,9 @@
/*
* Write twice, 8 bytes per write
*/
- eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+ eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
testbuf, 8);
- eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+ eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
testbuf, 16);
printf("done\n");
@@ -236,7 +236,7 @@
}
U_BOOT_CMD(
- pllalter, CFG_MAXARGS, 1, do_pll_alter,
+ pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter,
"pllalter- change pll frequence \n",
"pllalter <selection> - change pll frequence \n\n\
** New freq take effect after reset. ** \n\
diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c
index fc79907..9fc0ec6 100644
--- a/board/amcc/makalu/makalu.c
+++ b/board/amcc/makalu/makalu.c
@@ -37,7 +37,7 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*
* Board early initialization function
@@ -194,9 +194,9 @@
mtsdr(SDR0_SRST, 0);
/* Reset PCIe slots */
- gpio_write_bit(CFG_GPIO_PCIE_RST, 0);
+ gpio_write_bit(CONFIG_SYS_GPIO_PCIE_RST, 0);
udelay(100);
- gpio_write_bit(CFG_GPIO_PCIE_RST, 1);
+ gpio_write_bit(CONFIG_SYS_GPIO_PCIE_RST, 1);
/*
* Configure PFC (Pin Function Control) registers
@@ -213,7 +213,7 @@
#ifdef CONFIG_ENV_IS_IN_FLASH
/* Monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
+ -CONFIG_SYS_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
#endif
@@ -286,9 +286,9 @@
/* setup mem resource */
pci_set_region(hose->regions + 0,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMSIZE,
PCI_REGION_MEM);
hose->region_count = 1;
pci_register_hose(hose);
diff --git a/board/amcc/ocotea/config.mk b/board/amcc/ocotea/config.mk
index 9e18335..b62e776 100644
--- a/board/amcc/ocotea/config.mk
+++ b/board/amcc/ocotea/config.mk
@@ -40,5 +40,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/ocotea/flash.c b/board/amcc/ocotea/flash.c
index 46c6946..a83f93a 100644
--- a/board/amcc/ocotea/flash.c
+++ b/board/amcc/ocotea/flash.c
@@ -53,9 +53,9 @@
#define FLASH_ONBD_N_VAL 2
#define FLASH_SRAM_SEL_VAL 1
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
{0xFF800000, 0xFF880000, 0xFFC00000}, /* 0:000: configuraton 4 */
{0xFF900000, 0xFF980000, 0xFFC00000}, /* 1:001: configuraton 3 */
{0x00000000, 0x00000000, 0x00000000}, /* 2:010: configuraton 8 */
@@ -83,8 +83,8 @@
unsigned long flash_init(void)
{
unsigned long total_b = 0;
- unsigned long size_b[CFG_MAX_FLASH_BANKS];
- unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+ unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
+ unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE;
unsigned char switch_status;
unsigned short index = 0;
int i;
@@ -107,7 +107,7 @@
DEBUGF("FLASH: Index: %d\n", index);
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
@@ -131,8 +131,8 @@
}
/* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
&flash_info[i]);
#ifdef CONFIG_ENV_IS_IN_FLASH
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
diff --git a/board/amcc/ocotea/init.S b/board/amcc/ocotea/init.S
index d211c71..8bcfbb1 100644
--- a/board/amcc/ocotea/init.S
+++ b/board/amcc/ocotea/init.S
@@ -49,9 +49,9 @@
* routine.
*/
- tlbentry(CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
- tlbentry(CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
- tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index 4d1d093..fe45408 100644
--- a/board/amcc/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -42,7 +42,7 @@
int board_early_init_f (void)
{
unsigned long mfr;
- unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
+ unsigned char *fpga_base = (unsigned char *) CONFIG_SYS_FPGA_BASE;
unsigned char switch_status;
unsigned long cs0_base;
unsigned long cs0_size;
@@ -315,7 +315,7 @@
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
/*--------------------------------------------------------------------------+
@@ -330,7 +330,7 @@
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
* options to not support sizes such as 128/256 MB.
*--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
out32r( PCIX0_PIM0LAH, 0 );
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
@@ -339,12 +339,12 @@
/*--------------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*--------------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+ out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
/*************************************************************************
diff --git a/board/amcc/ocotea/ocotea.h b/board/amcc/ocotea/ocotea.h
index 95ce1fd..400852a 100644
--- a/board/amcc/ocotea/ocotea.h
+++ b/board/amcc/ocotea/ocotea.h
@@ -22,7 +22,7 @@
*/
/* Board specific FPGA stuff ... */
-#define FPGA_REG0 (CFG_FPGA_BASE + 0x00)
+#define FPGA_REG0 (CONFIG_SYS_FPGA_BASE + 0x00)
#define FPGA_REG0_SSCG_MASK 0x80
#define FPGA_REG0_SSCG_DISABLE 0x00
#define FPGA_REG0_SSCG_ENABLE 0x80
@@ -48,7 +48,7 @@
#define FPGA_REG0_ONBOARD_FLASH_ENABLE 0x00
#define FPGA_REG0_ONBOARD_FLASH_DISABLE 0x02
#define FPGA_REG0_FLASH 0x01
-#define FPGA_REG1 (CFG_FPGA_BASE + 0x01)
+#define FPGA_REG1 (CONFIG_SYS_FPGA_BASE + 0x01)
#define FPGA_REG1_9772_FSELFBX_MASK 0x80
#define FPGA_REG1_9772_FSELFBX_6 0x00
#define FPGA_REG1_9772_FSELFBX_10 0x80
@@ -71,7 +71,7 @@
#define FPGA_REG1_SOURCE_SSDIV1 0x05
#define FPGA_REG1_SOURCE_SSDIV2 0x06
#define FPGA_REG1_SOURCE_SSDIV4 0x07
-#define FPGA_REG2 (CFG_FPGA_BASE + 0x02)
+#define FPGA_REG2 (CONFIG_SYS_FPGA_BASE + 0x02)
#define FPGA_REG2_TC0 0x80
#define FPGA_REG2_TC1 0x40
#define FPGA_REG2_TC2 0x20
@@ -82,7 +82,7 @@
#define FPGA_REG2_EXT_INTFACE_DISABLE 0x04
#define FPGA_REG2_SMII_RESET_DISABLE 0x02 /*Use on Ocotea pass 3 boards*/
#define FPGA_REG2_DEFAULT_UART1_N 0x01
-#define FPGA_REG3 (CFG_FPGA_BASE + 0x03)
+#define FPGA_REG3 (CONFIG_SYS_FPGA_BASE + 0x03)
#define FPGA_REG3_GIGABIT_RESET_DISABLE 0x80 /*Use on Ocotea pass 1 boards*/
#define FPGA_REG3_ENET_MASK1 0x70 /*Use on Ocotea pass 1 boards*/
#define FPGA_REG3_ENET_MASK2 0xF0 /*Use on Ocotea pass 2 boards*/
@@ -108,7 +108,7 @@
#define FPGA_REG3_STAT_LED4_DISAB 0x00
#define FPGA_REG3_STAT_LED2_DISAB 0x00
#define FPGA_REG3_STAT_LED1_DISAB 0x00
-#define FPGA_REG4 (CFG_FPGA_BASE + 0x04)
+#define FPGA_REG4 (CONFIG_SYS_FPGA_BASE + 0x04)
#define FPGA_REG4_GPHY_MODE10 0x80
#define FPGA_REG4_GPHY_MODE100 0x40
#define FPGA_REG4_GPHY_MODE1000 0x20
diff --git a/board/amcc/redwood/config.mk b/board/amcc/redwood/config.mk
index f33336d..381f2b2 100644
--- a/board/amcc/redwood/config.mk
+++ b/board/amcc/redwood/config.mk
@@ -38,5 +38,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/redwood/init.S b/board/amcc/redwood/init.S
index fcffada..363d793 100644
--- a/board/amcc/redwood/init.S
+++ b/board/amcc/redwood/init.S
@@ -54,24 +54,24 @@
*/
/* Although 512 KB, map 256k at a time */
- tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
- tlbentry(CFG_ISRAM_BASE + 0x40000, SZ_256K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CONFIG_SYS_ISRAM_BASE + 0x40000, SZ_256K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
- tlbentry(CFG_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
/*
* Peripheral base
*/
- tlbentry(CFG_PERIPHERAL_BASE, SZ_16K, 0xEF600000, 4, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_16K, 0xEF600000, 4, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_XCFGBASE,SZ_16M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_XCFGBASE,SZ_16M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE2_XCFGBASE,SZ_16M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_XCFGBASE,SZ_16M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_XCFGBASE,SZ_16M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE2_XCFGBASE,SZ_16M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_MEMBASE, SZ_256M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_MEMBASE, SZ_256M, 0x00000000, 0xE, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_MEMBASE, SZ_256M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_MEMBASE, SZ_256M, 0x00000000, 0xE, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_REGBASE, SZ_64K, 0x30000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_REGBASE, SZ_64K, 0x30010000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE2_REGBASE, SZ_64K, 0x30020000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_REGBASE, SZ_64K, 0x30000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_REGBASE, SZ_64K, 0x30010000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE2_REGBASE, SZ_64K, 0x30020000, 0xC, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c
index 6b9043a..3402f84 100644
--- a/board/amcc/sequoia/cmd_sequoia.c
+++ b/board/amcc/sequoia/cmd_sequoia.c
@@ -46,7 +46,7 @@
#define NAND_COMPATIBLE 0x01
#define NOR_COMPATIBLE 0x02
-/* check with Stefan on CFG_I2C_EEPROM_ADDR */
+/* check with Stefan on CONFIG_SYS_I2C_EEPROM_ADDR */
#define I2C_EEPROM_ADDR 0x52
static char *config_labels[] = {
@@ -207,7 +207,7 @@
}
/* check CPLD register +5 for PCI 66MHz flag */
- if ((in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN) == 0)
+ if ((in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) & CONFIG_SYS_BCSR5_PCI66EN) == 0)
/*
* PLB-to-PCI divisor = 3 for 33MHz sync PCI
* instead of 2 for 66MHz systems
@@ -216,7 +216,7 @@
if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);
- udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+ udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
printf("Done\n");
printf("Please power-cycle the board for the changes to take effect\n");
diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk
index 5e04ee4..6c748c9 100644
--- a/board/amcc/sequoia/config.mk
+++ b/board/amcc/sequoia/config.mk
@@ -41,5 +41,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
index 46a37c6..bd346bf 100644
--- a/board/amcc/sequoia/init.S
+++ b/board/amcc/sequoia/init.S
@@ -45,36 +45,36 @@
/* TLB-entry for DDR SDRAM (Up to 2GB) */
#ifdef CONFIG_4xx_DCACHE
- tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
+ tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
#else
- tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
#endif
/* TLB-entry for EBC */
- tlbentry( CFG_BCSR_BASE, SZ_256M, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_BCSR_BASE, SZ_256M, CONFIG_SYS_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
/* BOOT_CS (FLASH) must be forth. Before relocation SA_I can be off to use the
* speed up boot process. It is patched after relocation to enable SA_I
*/
#ifndef CONFIG_NAND_SPL
- tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+ tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
#else
- tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
+ tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
#endif
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
- tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+ tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
#endif
/* TLB-entry for PCI Memory */
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
/* TLB-entry for NAND */
- tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
/* TLB-entry for Internal Registers & OCM */
tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I )
@@ -95,8 +95,8 @@
* For NAND booting the first TLB has to be reconfigured to full size
* and with caching disabled after running from RAM!
*/
-#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
.globl reconfig_tlb0
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
index 77e6c7b..64eb063 100644
--- a/board/amcc/sequoia/sdram.c
+++ b/board/amcc/sequoia/sdram.c
@@ -113,5 +113,5 @@
*/
set_mcsr(get_mcsr());
- return (CFG_MBYTES_SDRAM << 20);
+ return (CONFIG_SYS_MBYTES_SDRAM << 20);
}
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index e439fb9..d6668e2 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -33,7 +33,7 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
ulong flash_get_size (ulong base, int banknum);
@@ -74,16 +74,16 @@
mtdcr(uic2sr, 0xffffffff); /* clear all */
/* 50MHz tmrclk */
- out_8((u8 *) CFG_BCSR_BASE + 0x04, 0x00);
+ out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x04, 0x00);
/* clear write protects */
- out_8((u8 *) CFG_BCSR_BASE + 0x07, 0x00);
+ out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x07, 0x00);
/* enable Ethernet */
- out_8((u8 *) CFG_BCSR_BASE + 0x08, 0x00);
+ out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x08, 0x00);
/* enable USB device */
- out_8((u8 *) CFG_BCSR_BASE + 0x09, 0x20);
+ out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x09, 0x20);
/* select Ethernet (and optionally IIC1) pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);
@@ -113,7 +113,7 @@
SDR0_CUST0_NDFC_ENABLE |
SDR0_CUST0_NDFC_BW_8_BIT |
SDR0_CUST0_NDFC_ARE_MASK |
- (0x80000000 >> (28 + CFG_NAND_CS));
+ (0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
mtsdr(SDR0_CUST0, sdr0_cust0);
return 0;
@@ -160,7 +160,7 @@
#ifdef CONFIG_ENV_IS_IN_FLASH
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
+ -CONFIG_SYS_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
@@ -320,8 +320,8 @@
printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
#endif
- rev = in_8((void *)(CFG_BCSR_BASE + 0));
- val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
+ rev = in_8((void *)(CONFIG_SYS_BCSR_BASE + 0));
+ val = in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) & CONFIG_SYS_BCSR5_PCI66EN;
printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
if (s != NULL) {
@@ -407,7 +407,7 @@
* inbound map (PIM). But the bootstrap config choices are limited and
* may not be sufficient for a given board.
*/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
/*
@@ -423,16 +423,16 @@
*/
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
/* - disabled b4 setting */
- out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
- out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */
/* and enable region */
out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */
/* - disabled b4 setting */
- out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
- out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */
/* and enable region */
@@ -448,8 +448,8 @@
/* Program the board's subsystem id/vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
- CFG_PCI_SUBSYS_VENDORID);
- pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+ CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
/* Configure command register as bus master */
pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
@@ -463,9 +463,9 @@
pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
@@ -480,7 +480,7 @@
temp_short | PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
/*
* is_pci_host
diff --git a/board/amcc/sequoia/u-boot.lds b/board/amcc/sequoia/u-boot.lds
index b20fb1c..3cfec83 100644
--- a/board/amcc/sequoia/u-boot.lds
+++ b/board/amcc/sequoia/u-boot.lds
@@ -137,7 +137,7 @@
*(COMMON)
}
- ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+ ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
_end = . ;
PROVIDE (end = .);
diff --git a/board/amcc/taihu/flash.c b/board/amcc/taihu/flash.c
index ae92bb2..110cbe5 100644
--- a/board/amcc/taihu/flash.c
+++ b/board/amcc/taihu/flash.c
@@ -32,7 +32,7 @@
#include <ppc4xx.h>
#include <asm/processor.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
#undef DEBUG
#ifdef DEBUG
@@ -41,9 +41,9 @@
#define DEBUGF(x...)
#endif /* DEBUG */
-#define CFG_FLASH_CHAR_SIZE unsigned char
-#define CFG_FLASH_CHAR_ADDR0 (0x0aaa)
-#define CFG_FLASH_CHAR_ADDR1 (0x0555)
+#define CONFIG_SYS_FLASH_CHAR_SIZE unsigned char
+#define CONFIG_SYS_FLASH_CHAR_ADDR0 (0x0aaa)
+#define CONFIG_SYS_FLASH_CHAR_ADDR1 (0x0555)
/*-----------------------------------------------------------------------
* Functions
*/
@@ -65,7 +65,7 @@
int i;
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -84,8 +84,8 @@
flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
&flash_info[0]);
#ifdef CONFIG_ENV_IS_IN_FLASH
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
@@ -299,32 +299,32 @@
#endif
{
short i;
- CFG_FLASH_WORD_SIZE value;
+ CONFIG_SYS_FLASH_WORD_SIZE value;
ulong base = (ulong) addr;
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
/* Write auto select command: read Manufacturer ID */
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
udelay(1000);
value = addr2[0];
DEBUGF("FLASH MANUFACT: %x\n", value);
switch (value) {
- case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
- case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
break;
- case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
- case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
info->flash_id = FLASH_MAN_STM;
break;
default:
@@ -338,67 +338,67 @@
DEBUGF("\nFLASH DEVICEID: %x\n", value);
switch (value) {
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) STM_ID_M29W040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F016D:
info->flash_id += FLASH_AMD016;
info->sector_count = 32;
info->size = 0x00200000;
break; /* => 2 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV033C:
info->flash_id += FLASH_AMDLV033C;
info->sector_count = 64;
info->size = 0x00400000;
break; /* => 4 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400T:
info->flash_id += FLASH_AM400T;
info->sector_count = 11;
info->size = 0x00080000;
break; /* => 0.5 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400B:
info->flash_id += FLASH_AM400B;
info->sector_count = 11;
info->size = 0x00080000;
break; /* => 0.5 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800T:
info->flash_id += FLASH_AM800T;
info->sector_count = 19;
info->size = 0x00100000;
break; /* => 1 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800B:
info->flash_id += FLASH_AM800B;
info->sector_count = 19;
info->size = 0x00100000;
break; /* => 1 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160T:
info->flash_id += FLASH_AM160T;
info->sector_count = 35;
info->size = 0x00200000;
break; /* => 2 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160B:
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
info->size = 0x00200000;
@@ -445,14 +445,14 @@
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
- addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+ addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
/* For AMD29033C flash we need to resend the command of *
* reading flash protection for upper 8 Mb of flash */
if (i == 32) {
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
}
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -462,7 +462,7 @@
}
/* issue bank reset to return to read mode */
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
return info->size;
}
@@ -470,14 +470,14 @@
static int wait_for_DQ7_1(flash_info_t * info, int sect)
{
ulong start, now, last;
- volatile CFG_FLASH_WORD_SIZE *addr =
- (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+ (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
start = get_timer(0);
last = start;
- while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
- (CFG_FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+ (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Timeout\n");
return -1;
}
@@ -509,8 +509,8 @@
int flash_erase(flash_info_t * info, int s_first, int s_last)
#endif
{
- volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *addr2;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
int flag, prot, sect, l_sect;
int i;
@@ -550,24 +550,24 @@
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050; /* block erase */
for (i = 0; i < 50; i++)
udelay(1000); /* wait 1 ms */
} else {
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
}
l_sect = sect;
/*
@@ -589,8 +589,8 @@
udelay(1000);
/* reset to read mode */
- addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+ addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
printf(" done\n");
return 0;
@@ -691,9 +691,9 @@
static int write_word(flash_info_t * info, ulong dest, ulong data)
#endif
{
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
- volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
ulong start;
int i;
@@ -702,15 +702,15 @@
return 2;
}
- for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
int flag;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
dest2[i] = data2[i];
@@ -720,10 +720,10 @@
/* data polling for D7 */
start = get_timer(0);
- while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+ while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return 1;
}
}
@@ -740,32 +740,32 @@
static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
{
short i;
- CFG_FLASH_CHAR_SIZE value;
+ CONFIG_SYS_FLASH_CHAR_SIZE value;
ulong base = (ulong) addr;
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
/* Write auto select command: read Manufacturer ID */
- addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
udelay(1000);
- value = (CFG_FLASH_CHAR_SIZE)addr2[0];
+ value = (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0];
DEBUGF("FLASH MANUFACT: %x\n", value);
switch (value) {
- case (CFG_FLASH_CHAR_SIZE) AMD_MANUFACT:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
- case (CFG_FLASH_CHAR_SIZE) FUJ_MANUFACT:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
break;
- case (CFG_FLASH_CHAR_SIZE) SST_MANUFACT:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
- case (CFG_FLASH_CHAR_SIZE) STM_MANUFACT:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) STM_MANUFACT:
info->flash_id = FLASH_MAN_STM;
break;
default:
@@ -775,83 +775,83 @@
return 0; /* no or unknown flash */
}
- value = (CFG_FLASH_CHAR_SIZE)addr2[2]; /* device ID */
+ value = (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[2]; /* device ID */
DEBUGF("\nFLASH DEVICEID: %x\n", value);
switch (value) {
- case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV040B:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (CFG_FLASH_CHAR_SIZE) AMD_ID_F040B:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_F040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (CFG_FLASH_CHAR_SIZE) STM_ID_M29W040B:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) STM_ID_M29W040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (CFG_FLASH_CHAR_SIZE) AMD_ID_F016D:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_F016D:
info->flash_id += FLASH_AMD016;
info->sector_count = 32;
info->size = 0x00200000;
break; /* => 2 MB */
- case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV033C:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV033C:
info->flash_id += FLASH_AMDLV033C;
info->sector_count = 64;
info->size = 0x00400000;
break; /* => 4 MB */
- case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV400T:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV400T:
info->flash_id += FLASH_AM400T;
info->sector_count = 11;
info->size = 0x00080000;
break; /* => 0.5 MB */
- case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV400B:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV400B:
info->flash_id += FLASH_AM400B;
info->sector_count = 11;
info->size = 0x00080000;
break; /* => 0.5 MB */
- case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV800T:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV800T:
info->flash_id += FLASH_AM800T;
info->sector_count = 19;
info->size = 0x00100000;
break; /* => 1 MB */
- case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV800B:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV800B:
info->flash_id += FLASH_AM800B;
info->sector_count = 19;
info->size = 0x00100000;
break; /* => 1 MB */
- case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV160T:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV160T:
info->flash_id += FLASH_AM160T;
info->sector_count = 35;
info->size = 0x00200000;
break; /* => 2 MB */
- case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV160B:
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV160B:
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
info->size = 0x00200000;
break; /* => 2 MB */
- case (CFG_FLASH_CHAR_SIZE) AMD_ID_MIRROR:
- if ((CFG_FLASH_CHAR_SIZE)addr2[0x1c] == (CFG_FLASH_CHAR_SIZE)AMD_ID_LV128U_2
- && (CFG_FLASH_CHAR_SIZE)addr2[0x1e] == (CFG_FLASH_CHAR_SIZE)AMD_ID_LV128U_3) {
+ case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_MIRROR:
+ if ((CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1c] == (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_LV128U_2
+ && (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1e] == (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_LV128U_3) {
info->flash_id += FLASH_AMLV128U;
info->sector_count = 256;
info->size = 0x01000000;
- } else if ((CFG_FLASH_CHAR_SIZE)addr2[0x1c] == (CFG_FLASH_CHAR_SIZE)AMD_ID_GL128N_2
- && (CFG_FLASH_CHAR_SIZE)addr2[0x1e] == (CFG_FLASH_CHAR_SIZE)AMD_ID_GL128N_3 ) {
+ } else if ((CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1c] == (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_GL128N_2
+ && (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1e] == (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_GL128N_3 ) {
info->flash_id += FLASH_S29GL128N;
info->sector_count = 128;
info->size = 0x01000000;
@@ -904,38 +904,38 @@
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
- addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+ addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
/* For AMD29033C flash we need to resend the command of *
* reading flash protection for upper 8 Mb of flash */
if (i == 32) {
- addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
}
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
info->protect[i] = 0;
else
- info->protect[i] = (CFG_FLASH_CHAR_SIZE)addr2[4] & 1;
+ info->protect[i] = (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[4] & 1;
}
/* issue bank reset to return to read mode */
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0xF0F0F0F0;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF0F0F0F0;
return info->size;
}
static int wait_for_DQ7_2(flash_info_t * info, int sect)
{
ulong start, now, last;
- volatile CFG_FLASH_WORD_SIZE *addr =
- (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+ (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
start = get_timer(0);
last = start;
- while (((CFG_FLASH_WORD_SIZE)addr[0] & (CFG_FLASH_WORD_SIZE) 0x80808080) !=
- (CFG_FLASH_WORD_SIZE) 0x80808080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ while (((CONFIG_SYS_FLASH_WORD_SIZE)addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080) !=
+ (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Timeout\n");
return -1;
}
@@ -950,8 +950,8 @@
static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
{
- volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *addr2;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
int flag, prot, sect, l_sect;
int i;
@@ -991,24 +991,24 @@
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80808080;
- addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x50505050; /* block erase */
+ addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080;
+ addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x50505050; /* block erase */
for (i = 0; i < 50; i++)
udelay(1000); /* wait 1 ms */
} else {
- addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80808080;
- addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x30303030; /* sector erase */
+ addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080;
+ addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x30303030; /* sector erase */
}
l_sect = sect;
/*
@@ -1030,8 +1030,8 @@
udelay(1000);
/* reset to read mode */
- addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (CFG_FLASH_WORD_SIZE) 0xF0F0F0F0; /* reset bank */
+ addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF0F0F0F0; /* reset bank */
printf(" done\n");
return 0;
@@ -1039,9 +1039,9 @@
static int write_word_2(flash_info_t * info, ulong dest, ulong data)
{
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
- volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
ulong start;
int i;
@@ -1050,15 +1050,15 @@
return 2;
}
- for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
int flag;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
- addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xA0A0A0A0;
+ addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xA0A0A0A0;
dest2[i] = data2[i];
@@ -1068,10 +1068,10 @@
/* data polling for D7 */
start = get_timer(0);
- while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x80808080) !=
- (data2[i] & (CFG_FLASH_WORD_SIZE) 0x80808080)) {
+ while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080) !=
+ (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return 1;
}
}
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index ee0939a..6e9330f 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -48,8 +48,8 @@
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtebc(pb3ap, CFG_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */
- mtebc(pb3cr, CFG_EBC_PB3CR);
+ mtebc(pb3ap, CONFIG_SYS_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */
+ mtebc(pb3cr, CONFIG_SYS_EBC_PB3CR);
/*
* Configure CPC0_PCI to enable PerWE as output
diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c
index 55ad535..52bad56 100644
--- a/board/amcc/taihu/update.c
+++ b/board/amcc/taihu/update.c
@@ -101,7 +101,7 @@
static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[])
{
ulong len = 0x20;
- uchar chip = CFG_I2C_EEPROM_ADDR;
+ uchar chip = CONFIG_SYS_I2C_EEPROM_ADDR;
uchar *pbuf;
uchar base;
int i;
diff --git a/board/amcc/taishan/config.mk b/board/amcc/taishan/config.mk
index 4eefff2..ee5eb1b 100644
--- a/board/amcc/taishan/config.mk
+++ b/board/amcc/taishan/config.mk
@@ -40,5 +40,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/taishan/init.S b/board/amcc/taishan/init.S
index 8db043b..748ec0a 100644
--- a/board/amcc/taishan/init.S
+++ b/board/amcc/taishan/init.S
@@ -89,9 +89,9 @@
tlbtab:
tlbtab_start
tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
- tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X )
- tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X )
+ tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
tlbtab_end
diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c
index 8d2dce3..624ae40 100644
--- a/board/amcc/taishan/lcd.c
+++ b/board/amcc/taishan/lcd.c
@@ -31,9 +31,9 @@
#define LCD_DELAY_NORMAL_US 100
#define LCD_DELAY_NORMAL_MS 2
-#define LCD_CMD_ADDR ((volatile char *)(CFG_EBC2_LCM_BASE))
-#define LCD_DATA_ADDR ((volatile char *)(CFG_EBC2_LCM_BASE+1))
-#define LCD_BLK_CTRL ((volatile char *)(CFG_EBC1_FPGA_BASE+0x2))
+#define LCD_CMD_ADDR ((volatile char *)(CONFIG_SYS_EBC2_LCM_BASE))
+#define LCD_DATA_ADDR ((volatile char *)(CONFIG_SYS_EBC2_LCM_BASE+1))
+#define LCD_BLK_CTRL ((volatile char *)(CONFIG_SYS_EBC1_FPGA_BASE+0x2))
#define mdelay(t) ({unsigned long msec=(t); while (msec--) { udelay(1000);}})
@@ -359,7 +359,7 @@
static int do_led_test_off(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
volatile unsigned int *GpioOr =
- (volatile unsigned int *)(CFG_PERIPHERAL_BASE + 0x700);
+ (volatile unsigned int *)(CONFIG_SYS_PERIPHERAL_BASE + 0x700);
*GpioOr |= 0x00300000;
return 0;
}
@@ -367,7 +367,7 @@
static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
volatile unsigned int *GpioOr =
- (volatile unsigned int *)(CFG_PERIPHERAL_BASE + 0x700);
+ (volatile unsigned int *)(CONFIG_SYS_PERIPHERAL_BASE + 0x700);
*GpioOr &= ~0x00300000;
return 0;
}
diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c
index cd432cb..28bdab5 100644
--- a/board/amcc/taishan/taishan.c
+++ b/board/amcc/taishan/taishan.c
@@ -29,7 +29,7 @@
#include <ppc4xx_enet.h>
#include <netdev.h>
-#ifdef CFG_INIT_SHOW_RESET_REG
+#ifdef CONFIG_SYS_INIT_SHOW_RESET_REG
void show_reset_reg(void);
#endif
@@ -63,7 +63,7 @@
EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED |
EBC_BXAP_BEM_WRITEONLY |
EBC_BXAP_PEN_DISABLED);
- mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |
+ mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_32BIT);
/*-------------------------------------------------------------------------+
@@ -173,9 +173,9 @@
mtsdr(sdr_pfc1,reg);
/* Set GPIO 10 and 11 as output */
- GpioOdr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x718);
- GpioTcr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x704);
- GpioOr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x700);
+ GpioOdr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x718);
+ GpioTcr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x704);
+ GpioOr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x700);
*GpioOdr &= ~(0x00300000);
*GpioTcr |= 0x00300000;
@@ -202,7 +202,7 @@
}
putc ('\n');
-#ifdef CFG_INIT_SHOW_RESET_REG
+#ifdef CONFIG_SYS_INIT_SHOW_RESET_REG
show_reset_reg();
#endif
@@ -248,7 +248,7 @@
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
/*--------------------------------------------------------------------------+
@@ -263,7 +263,7 @@
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
* options to not support sizes such as 128/256 MB.
*--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
out32r( PCIX0_PIM0LAH, 0 );
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
@@ -272,12 +272,12 @@
/*--------------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*--------------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+ out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
/*************************************************************************
* is_pci_host
diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c
index ed2c196..96b918b 100644
--- a/board/amcc/taishan/update.c
+++ b/board/amcc/taishan/update.c
@@ -51,7 +51,7 @@
static int update_boot_eeprom(void)
{
ulong len = 0x10;
- uchar chip = CFG_BOOTSTRAP_IIC_ADDR;
+ uchar chip = CONFIG_SYS_BOOTSTRAP_IIC_ADDR;
uchar *pbuf = (uchar *)bootstrap_buf;
int ii, jj;
diff --git a/board/amcc/walnut/flash.c b/board/amcc/walnut/flash.c
index fe6ca6c..d363564 100644
--- a/board/amcc/walnut/flash.c
+++ b/board/amcc/walnut/flash.c
@@ -58,7 +58,7 @@
unsigned long base_b0, base_b1;
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -73,14 +73,14 @@
}
/* Only one bank */
- if (CFG_MAX_FLASH_BANKS == 1) {
+ if (CONFIG_SYS_MAX_FLASH_BANKS == 1) {
/* Setup offsets */
flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
&flash_info[0]);
#ifdef CONFIG_ENV_IS_IN_FLASH
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
diff --git a/board/amcc/yosemite/config.mk b/board/amcc/yosemite/config.mk
index 4ab0ea0..df5466e 100644
--- a/board/amcc/yosemite/config.mk
+++ b/board/amcc/yosemite/config.mk
@@ -40,5 +40,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/yosemite/init.S b/board/amcc/yosemite/init.S
index 425ad08..f938236 100644
--- a/board/amcc/yosemite/init.S
+++ b/board/amcc/yosemite/init.S
@@ -91,22 +91,22 @@
* BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
* speed up boot process. It is patched after relocation to enable SA_I
*/
- tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+ tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
- tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+ tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
- tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+ tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
/* PCI */
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
/* USB 2.0 Device */
- tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
tlbtab_end
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 05be40a..3982896 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -31,7 +31,7 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
int board_early_init_f(void)
{
@@ -107,18 +107,18 @@
mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */
/*clear tmrclk divisor */
- *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+ *(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x04) = 0x00;
/*enable ethernet */
- *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
+ *(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x08) = 0xf0;
#ifdef CONFIG_440EP
/*enable usb 1.1 fs device and remove usb 2.0 reset */
- *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+ *(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x09) = 0x00;
#endif
/*get rid of flash write protect */
- *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
+ *(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x07) = 0x00;
return 0;
}
@@ -167,7 +167,7 @@
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
+ -CONFIG_SYS_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
@@ -186,8 +186,8 @@
printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
#endif
- rev = in_8((void *)(CFG_BCSR_BASE + 0));
- val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
+ rev = in_8((void *)(CONFIG_SYS_BCSR_BASE + 0));
+ val = in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) & CONFIG_SYS_BCSR5_PCI66EN;
printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
if (s != NULL) {
@@ -329,7 +329,7 @@
sdram_tr1_set(0x08000000, &tr1_bank2);
mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800));
- return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */
+ return CONFIG_SYS_SDRAM_BANKS * (CONFIG_SYS_KBYTES_SDRAM * 1024); /* return bytes */
}
/*************************************************************************
@@ -395,7 +395,7 @@
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
/*--------------------------------------------------------------------------+
@@ -409,14 +409,14 @@
| Make this region non-prefetchable.
+--------------------------------------------------------------------------*/
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
- out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
- out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
- out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
- out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
@@ -431,8 +431,8 @@
/* Program the board's subsystem id/vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
- CFG_PCI_SUBSYS_VENDORID);
- pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+ CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
/* Configure command register as bus master */
pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
@@ -446,13 +446,13 @@
pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
/*************************************************************************
* pci_master_init
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
@@ -467,7 +467,7 @@
temp_short | PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
/*************************************************************************
* is_pci_host
@@ -508,5 +508,5 @@
void board_reset(void)
{
/* give reset to BCSR */
- *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
+ *(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x06) = 0x09;
}
diff --git a/board/amcc/yucca/config.mk b/board/amcc/yucca/config.mk
index ff454eb..3ce3cc1 100644
--- a/board/amcc/yucca/config.mk
+++ b/board/amcc/yucca/config.mk
@@ -38,5 +38,5 @@
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/yucca/flash.c b/board/amcc/yucca/flash.c
index c405346..eda49eb 100644
--- a/board/amcc/yucca/flash.c
+++ b/board/amcc/yucca/flash.c
@@ -43,12 +43,12 @@
#define DEBUGF(x...)
#endif /* DEBUG */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*
* Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
*/
-static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = {
{0xfff00000, 0xfff80000, 0xe7c00001}, /* 0:boot from small flash */
{0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66 */
{0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash */
@@ -67,7 +67,7 @@
* Functions
*/
static int write_word(flash_info_t * info, ulong dest, ulong data);
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
static int write_word_1(flash_info_t * info, ulong dest, ulong data);
static int write_word_2(flash_info_t * info, ulong dest, ulong data);
static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
@@ -198,7 +198,7 @@
/*
* The following code cannot be run from FLASH!
*/
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
static ulong flash_get_size(vu_long * addr, flash_info_t * info)
{
/* bit 0 used for big flash marking */
@@ -214,32 +214,32 @@
#endif
{
short i;
- CFG_FLASH_WORD_SIZE value;
+ CONFIG_SYS_FLASH_WORD_SIZE value;
ulong base = (ulong) addr;
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
/* Write auto select command: read Manufacturer ID */
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
udelay(1000);
value = addr2[0];
DEBUGF("FLASH MANUFACT: %x\n", value);
switch (value) {
- case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
- case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
break;
- case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
- case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
info->flash_id = FLASH_MAN_STM;
break;
default:
@@ -253,67 +253,67 @@
DEBUGF("\nFLASH DEVICEID: %x\n", value);
switch (value) {
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) STM_ID_M29W040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F016D:
info->flash_id += FLASH_AMD016;
info->sector_count = 32;
info->size = 0x00200000;
break; /* => 2 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV033C:
info->flash_id += FLASH_AMDLV033C;
info->sector_count = 64;
info->size = 0x00400000;
break; /* => 4 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400T:
info->flash_id += FLASH_AM400T;
info->sector_count = 11;
info->size = 0x00080000;
break; /* => 0.5 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400B:
info->flash_id += FLASH_AM400B;
info->sector_count = 11;
info->size = 0x00080000;
break; /* => 0.5 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800T:
info->flash_id += FLASH_AM800T;
info->sector_count = 19;
info->size = 0x00100000;
break; /* => 1 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800B:
info->flash_id += FLASH_AM800B;
info->sector_count = 19;
info->size = 0x00100000;
break; /* => 1 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160T:
info->flash_id += FLASH_AM160T;
info->sector_count = 35;
info->size = 0x00200000;
break; /* => 2 MB */
- case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160B:
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
info->size = 0x00200000;
@@ -357,14 +357,14 @@
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
- addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+ addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
/* For AMD29033C flash we need to resend the command of *
* reading flash protection for upper 8 Mb of flash */
if (i == 32) {
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
}
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -374,7 +374,7 @@
}
/* issue bank reset to return to read mode */
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
return (info->size);
}
@@ -382,14 +382,14 @@
static int wait_for_DQ7_1(flash_info_t * info, int sect)
{
ulong start, now, last;
- volatile CFG_FLASH_WORD_SIZE *addr =
- (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+ (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
start = get_timer(0);
last = start;
- while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
- (CFG_FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+ (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Timeout\n");
return -1;
}
@@ -402,7 +402,7 @@
return 0;
}
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
int flash_erase(flash_info_t * info, int s_first, int s_last)
{
if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
@@ -420,8 +420,8 @@
int flash_erase(flash_info_t * info, int s_first, int s_last)
#endif
{
- volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *addr2;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
int flag, prot, sect, l_sect;
int i;
@@ -457,24 +457,24 @@
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050; /* block erase */
for (i = 0; i < 50; i++)
udelay(1000); /* wait 1 ms */
} else {
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
}
l_sect = sect;
/*
@@ -496,8 +496,8 @@
udelay(1000);
/* reset to read mode */
- addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+ addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
printf(" done\n");
return 0;
@@ -577,7 +577,7 @@
* 1 - write timeout
* 2 - Flash not erased
*/
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
static int write_word(flash_info_t * info, ulong dest, ulong data)
{
if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
@@ -595,9 +595,9 @@
static int write_word(flash_info_t * info, ulong dest, ulong data)
#endif
{
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
- volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
ulong start;
int i, flag;
@@ -605,13 +605,13 @@
if ((*((vu_long *)dest) & data) != data)
return (2);
- for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
dest2[i] = data2[i];
@@ -621,10 +621,10 @@
/* data polling for D7 */
start = get_timer(0);
- while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+ while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
return (1);
}
}
@@ -632,10 +632,10 @@
return (0);
}
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
-#undef CFG_FLASH_WORD_SIZE
-#define CFG_FLASH_WORD_SIZE unsigned short
+#undef CONFIG_SYS_FLASH_WORD_SIZE
+#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short
/*
* The following code cannot be run from FLASH!
@@ -644,37 +644,37 @@
{
short i;
int n;
- CFG_FLASH_WORD_SIZE value;
+ CONFIG_SYS_FLASH_WORD_SIZE value;
ulong base = (ulong) addr;
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
/* issue bank reset to return to read mode */
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
/* Write auto select command: read Manufacturer ID */
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
udelay(1000);
value = addr2[0];
DEBUGF("FLASH MANUFACT: %x\n", value);
switch (value) {
- case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
- case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
break;
- case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
- case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
info->flash_id = FLASH_MAN_STM;
break;
- case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE) MX_MANUFACT:
info->flash_id = FLASH_MAN_MX;
break;
default:
@@ -688,22 +688,22 @@
DEBUGF("\nFLASH DEVICEID: %x\n", value);
switch (value) {
- case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
info->flash_id += FLASH_AM320T;
info->sector_count = 71;
info->size = 0x00400000;
break; /* => 4 MB */
- case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+ case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
info->flash_id += FLASH_AM320B;
info->sector_count = 71;
info->size = 0x00400000;
break; /* => 4 MB */
- case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
+ case (CONFIG_SYS_FLASH_WORD_SIZE)STM_ID_29W320DT:
info->flash_id += FLASH_STMW320DT;
info->sector_count = 67;
info->size = 0x00400000;
break; /* => 4 MB */
- case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+ case (CONFIG_SYS_FLASH_WORD_SIZE)MX_ID_LV320T:
info->flash_id += FLASH_MXLV320T;
info->sector_count = 71;
info->size = 0x00400000;
@@ -782,14 +782,14 @@
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
- addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+ addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
/* For AMD29033C flash we need to resend the command of *
* reading flash protection for upper 8 Mb of flash */
if (i == 32) {
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
}
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -799,7 +799,7 @@
}
/* issue bank reset to return to read mode */
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
return (info->size);
}
@@ -807,14 +807,14 @@
static int wait_for_DQ7_2(flash_info_t * info, int sect)
{
ulong start, now, last;
- volatile CFG_FLASH_WORD_SIZE *addr =
- (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+ (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
start = get_timer(0);
last = start;
- while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
- (CFG_FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+ (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Timeout\n");
return -1;
}
@@ -829,8 +829,8 @@
static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
{
- volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *addr2;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
int flag, prot, sect, l_sect;
int i;
@@ -866,24 +866,24 @@
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+ addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050; /* block erase */
for (i = 0; i < 50; i++)
udelay(1000); /* wait 1 ms */
} else {
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
- addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+ addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
}
l_sect = sect;
/*
@@ -905,8 +905,8 @@
udelay(1000);
/* reset to read mode */
- addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+ addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
printf(" done\n");
return 0;
@@ -914,9 +914,9 @@
static int write_word_2(flash_info_t * info, ulong dest, ulong data)
{
- volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
- volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
ulong start;
int i;
@@ -924,15 +924,15 @@
if ((*((vu_long *)dest) & data) != data)
return (2);
- for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
int flag;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
- addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
dest2[i] = data2[i];
@@ -942,17 +942,17 @@
/* data polling for D7 */
start = get_timer(0);
- while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+ while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
return (1);
}
}
return (0);
}
-#endif /* CFG_FLASH_2ND_16BIT_DEV */
+#endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */
/*-----------------------------------------------------------------------
* Functions
@@ -966,7 +966,7 @@
unsigned long flash_init(void)
{
unsigned long total_b = 0;
- unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
unsigned short index = 0;
int i;
unsigned long val;
@@ -1011,7 +1011,7 @@
DEBUGF("FLASH: Index: %d\n", index);
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
@@ -1034,8 +1034,8 @@
}
/* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
&flash_info[i]);
#if defined(CONFIG_ENV_IS_IN_FLASH)
(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S
index 67e8f8f..9308fda 100644
--- a/board/amcc/yucca/init.S
+++ b/board/amcc/yucca/init.S
@@ -59,23 +59,23 @@
* routine.
*/
- tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
- tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
+ tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
- tlbentry(CFG_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
/**************************************************************************
@@ -102,20 +102,20 @@
* routine.
*/
- tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
- tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
+ tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
- tlbentry(CFG_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
- tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index e0c1268..c805568 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -626,7 +626,7 @@
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
/*-------------------------------------------------------------------+
@@ -641,7 +641,7 @@
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
* strapping options to not support sizes such as 128/256 MB.
*-------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
out32r( PCIX0_PIM0LAH, 0 );
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
out32r( PCIX0_BAR0, 0 );
@@ -649,12 +649,12 @@
/*-------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*-------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+ out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
#if defined(CONFIG_PCI)
/*************************************************************************
@@ -843,9 +843,9 @@
/* setup mem resource */
pci_set_region(hose->regions + 0,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMSIZE,
PCI_REGION_MEM);
hose->region_count = 1;
pci_register_hose(hose);
diff --git a/board/amirix/ap1000/flash.c b/board/amirix/ap1000/flash.c
index 1a3b252..1e742e5 100644
--- a/board/amirix/ap1000/flash.c
+++ b/board/amirix/ap1000/flash.c
@@ -110,7 +110,7 @@
#define NUM_ERASE_REGIONS 4
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -130,7 +130,7 @@
cfiword_t cword);
static int flash_full_status_check (flash_info_t * info, ulong sector,
ulong tout, char *prompt);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
int len);
#endif
@@ -270,7 +270,7 @@
flash_info[0].flash_id = FLASH_UNKNOWN;
flash_info[0].portwidth = FLASH_CFI_16BIT;
flash_info[0].chipwidth = FLASH_CFI_16BIT;
- size += flash_info[0].size = flash_get_size (CFG_PROGFLASH_BASE, 0);
+ size += flash_info[0].size = flash_get_size (CONFIG_SYS_PROGFLASH_BASE, 0);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 1, flash_info[0].size, flash_info[0].size << 20);
};
@@ -278,7 +278,7 @@
flash_info[1].flash_id = FLASH_UNKNOWN;
flash_info[1].portwidth = FLASH_CFI_8BIT;
flash_info[1].chipwidth = FLASH_CFI_16BIT;
- size += flash_info[1].size = flash_get_size (CFG_CONFFLASH_BASE, 1);
+ size += flash_info[1].size = flash_get_size (CONFIG_SYS_CONFFLASH_BASE, 1);
if (flash_info[1].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 2, flash_info[1].size, flash_info[1].size << 20);
};
@@ -398,7 +398,7 @@
return rc;
wp = cp;
}
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
while (cnt >= info->portwidth) {
i = info->buffer_size > cnt ? cnt : info->buffer_size;
if ((rc = flash_write_cfibuffer (info, wp, src, i)) != ERR_OK)
@@ -419,7 +419,7 @@
wp += info->portwidth;
cnt -= info->portwidth;
}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
if (cnt == 0) {
return (0);
}
@@ -824,7 +824,7 @@
return flash_full_status_check (info, 0, info->write_tout, "write");
}
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
/* loop through the sectors from the highest address
* when the passed address is greater or equal to the sector address
@@ -900,4 +900,4 @@
flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
return retcode;
}
-#endif /* CFG_USE_FLASH_BUFFER_WRITE */
+#endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
diff --git a/board/amirix/ap1000/pci.c b/board/amirix/ap1000/pci.c
index a6436ac..a9b3fd8 100644
--- a/board/amirix/ap1000/pci.c
+++ b/board/amirix/ap1000/pci.c
@@ -267,10 +267,10 @@
static struct pci_config_table ap1000_config_table[] = {
#ifdef CONFIG_AP1000
{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_BUS (CFG_ETH_DEV_FN), PCI_DEV (CFG_ETH_DEV_FN),
- PCI_FUNC (CFG_ETH_DEV_FN),
+ PCI_BUS (CONFIG_SYS_ETH_DEV_FN), PCI_DEV (CONFIG_SYS_ETH_DEV_FN),
+ PCI_FUNC (CONFIG_SYS_ETH_DEV_FN),
pci_cfgfunc_config_device,
- {CFG_ETH_IOBASE, CFG_ETH_MEMBASE,
+ {CONFIG_SYS_ETH_IOBASE, CONFIG_SYS_ETH_MEMBASE,
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
#endif
{}
diff --git a/board/amirix/ap1000/serial.c b/board/amirix/ap1000/serial.c
index 508e880..87003be 100644
--- a/board/amirix/ap1000/serial.c
+++ b/board/amirix/ap1000/serial.c
@@ -30,15 +30,15 @@
DECLARE_GLOBAL_DATA_PTR;
const NS16550_t COM_PORTS[] =
- { (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 };
+ { (NS16550_t) CONFIG_SYS_NS16550_COM1, (NS16550_t) CONFIG_SYS_NS16550_COM2 };
-#undef CFG_DUART_CHAN
-#define CFG_DUART_CHAN gComPort
+#undef CONFIG_SYS_DUART_CHAN
+#define CONFIG_SYS_DUART_CHAN gComPort
static int gComPort = 0;
int serial_init (void)
{
- int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+ int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
(void) NS16550_init (COM_PORTS[0], clock_divisor);
gComPort = 0;
@@ -49,30 +49,30 @@
void serial_putc (const char c)
{
if (c == '\n') {
- NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
+ NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
}
- NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
+ NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
}
int serial_getc (void)
{
- return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
+ return NS16550_getc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
}
int serial_tstc (void)
{
- return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
+ return NS16550_tstc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
}
void serial_setbrg (void)
{
- int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+ int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
NS16550_reinit (COM_PORTS[0], clock_divisor);
#endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
NS16550_reinit (COM_PORTS[1], clock_divisor);
#endif
}
diff --git a/board/ap325rxa/ap325rxa.c b/board/ap325rxa/ap325rxa.c
index cfa0261..9f1112a 100644
--- a/board/ap325rxa/ap325rxa.c
+++ b/board/ap325rxa/ap325rxa.c
@@ -144,9 +144,9 @@
{
DECLARE_GLOBAL_DATA_PTR;
- gd->bd->bi_memstart = CFG_SDRAM_BASE;
- gd->bd->bi_memsize = CFG_SDRAM_SIZE;
- printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
return 0;
}
diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c
index 8efa703..8964eba 100644
--- a/board/apollon/apollon.c
+++ b/board/apollon/apollon.c
@@ -245,7 +245,7 @@
__raw_writel(v, CM_CLKSEL2_CORE);
__raw_writel(0x1, CM_CLKSEL_WKUP);
-#ifdef CFG_NS16550
+#ifdef CONFIG_SYS_NS16550
/* Enable UART1 clock */
func_clks |= BIT21;
if_clks |= BIT21;
diff --git a/board/apollon/lowlevel_init.S b/board/apollon/lowlevel_init.S
index 8381fea..64550f6 100644
--- a/board/apollon/lowlevel_init.S
+++ b/board/apollon/lowlevel_init.S
@@ -51,7 +51,7 @@
.globl lowlevel_init
lowlevel_init:
-#ifdef CFG_NOR_BOOT
+#ifdef CONFIG_SYS_NOR_BOOT
/* Check running in SDRAM */
mov r0, pc, lsr #28
cmp r0, #8
diff --git a/board/apollon/mem.c b/board/apollon/mem.c
index 0211c6a..36bf6e9 100644
--- a/board/apollon/mem.c
+++ b/board/apollon/mem.c
@@ -146,7 +146,7 @@
__raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
__raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
__raw_writel(tval, GPMC_TIMEOUT_CONTROL); /* timeout disable */
-#ifdef CFG_NAND_BOOT
+#ifdef CONFIG_SYS_NAND_BOOT
/* set nWP, disable limited addr */
__raw_writel(0x001, GPMC_CONFIG);
#else
@@ -164,7 +164,7 @@
__raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */
sdelay(1000);
-#ifdef CFG_NOR_BOOT
+#ifdef CONFIG_SYS_NOR_BOOT
__raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_0);
__raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_0);
__raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_0);
@@ -208,13 +208,13 @@
__raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_2);
__raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_2);
__raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_2);
-#ifdef CFG_NOR_BOOT
+#ifdef CONFIG_SYS_NOR_BOOT
__raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_2);
#else
__raw_writel(APOLLON_24XX_GPMC_CONFIG7_2, GPMC_CONFIG7_2);
#endif
-#ifndef CFG_NOR_BOOT
+#ifndef CONFIG_SYS_NOR_BOOT
/* setup cs3 */
__raw_writel(0, GPMC_CONFIG7_3); /* disable any mapping */
sdelay(1000);
diff --git a/board/apollon/mem.h b/board/apollon/mem.h
index d4636f4..09c4ea4 100644
--- a/board/apollon/mem.h
+++ b/board/apollon/mem.h
@@ -142,7 +142,7 @@
#endif /* endif PRCM_CONFIG_II */
#ifdef PRCM_CONFIG_III /* L3 at 133MHz */
-# ifdef CFG_NAND_BOOT
+# ifdef CONFIG_SYS_NAND_BOOT
# define APOLLON_24XX_GPMC_CONFIG1_0 0x0
# define APOLLON_24XX_GPMC_CONFIG2_0 0x00141400
# define APOLLON_24XX_GPMC_CONFIG3_0 0x00141400
@@ -156,7 +156,7 @@
# define APOLLON_24XX_GPMC_CONFIG4_0 0x10081008
# define APOLLON_24XX_GPMC_CONFIG5_0 0x01131F1F
# define APOLLON_24XX_GPMC_CONFIG6_0 0x000004c4
-# endif /* endif CFG_NAND_BOOT */
+# endif /* endif CONFIG_SYS_NAND_BOOT */
# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000C40|(APOLLON_CS0_BASE >> 24))
# define APOLLON_24XX_GPMC_CONFIG1_1 0x00011000
# define APOLLON_24XX_GPMC_CONFIG2_1 0x001f1f01
@@ -165,6 +165,6 @@
# define APOLLON_24XX_GPMC_CONFIG5_1 0x041f1F1F
# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4
# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24))
-#endif /* endif CFG_PRCM_III */
+#endif /* endif CONFIG_SYS_PRCM_III */
#endif /* endif _APOLLON_OMAP24XX_MEM_H_ */
diff --git a/board/armadillo/flash.c b/board/armadillo/flash.c
index 6ed88f4..cdbbfd0 100644
--- a/board/armadillo/flash.c
+++ b/board/armadillo/flash.c
@@ -37,7 +37,7 @@
#define FL_WORD(addr) (*(volatile unsigned short*)(addr))
#define FLASH_TIMEOUT 20000000
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*-----------------------------------------------------------------------
*/
@@ -47,14 +47,14 @@
int i, j;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_info[i].flash_id = (FUJ_MANUFACT & FLASH_VENDMASK);
/*(INTEL_ID_28F128J3 & FLASH_TYPEMASK); */
flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
if (i == 0)
flashbase = PHYS_FLASH_1;
else
@@ -69,8 +69,8 @@
/* Protect monitor and environment sectors
*/
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
&flash_info[0]);
flash_protect (FLAG_PROTECT_SET,
diff --git a/board/atc/atc.c b/board/atc/atc.c
index b627c1c..936c031 100644
--- a/board/atc/atc.c
+++ b/board/atc/atc.c
@@ -281,7 +281,7 @@
*/
maxsize = (1 + (~orx | 0x7fff)) / 2;
- /* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+ /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
* we are configuring CS1 if base != 0
*/
sdmr_ptr = &memctl->memc_psdmr;
@@ -306,7 +306,7 @@
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -317,7 +317,7 @@
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
- *(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */
+ *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
@@ -331,7 +331,7 @@
int misc_init_r(void)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
upmconfig(UPMA, (uint *)rtc_table, sizeof(rtc_table) / sizeof(uint));
@@ -342,37 +342,37 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong size8, size9;
#endif
long psize;
psize = 8 * 1024 * 1024;
- memctl->memc_mptpr = CFG_MPTPR;
- memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+ memctl->memc_psrt = CONFIG_SYS_PSRT;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
- size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
- (uchar *) CFG_SDRAM_BASE);
- size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
- (uchar *) CFG_SDRAM_BASE);
+ size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
+ size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
if (size8 < size9) {
psize = size9;
printf ("(60x:9COL) ");
} else {
- psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
- (uchar *) CFG_SDRAM_BASE);
+ psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
printf ("(60x:8COL) ");
}
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
icache_enable ();
@@ -382,7 +382,7 @@
#if defined(CONFIG_CMD_DOC)
void doc_init (void)
{
- doc_probe (CFG_DOC_BASE);
+ doc_probe (CONFIG_SYS_DOC_BASE);
}
#endif
diff --git a/board/atc/config.mk b/board/atc/config.mk
index eee7a60..dd854e7 100644
--- a/board/atc/config.mk
+++ b/board/atc/config.mk
@@ -25,7 +25,7 @@
# ATC boards
#
-# This should be equal to the CFG_FLASH_BASE define in config_atc.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_atc.h
# for the "final" configuration, with U-Boot in flash, or the address
# in RAM where U-Boot is loaded at for debugging.
#
diff --git a/board/atc/flash.c b/board/atc/flash.c
index 7835e8f..fd76723 100644
--- a/board/atc/flash.c
+++ b/board/atc/flash.c
@@ -23,7 +23,7 @@
#include <common.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
* has nothing to do with the flash chip being 8-bit or 16-bit.
@@ -67,11 +67,11 @@
int i;
/* Init: no FLASHes known */
- for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
#if 0
ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2;
#else
- ulong flashbase = CFG_FLASH_BASE;
+ ulong flashbase = CONFIG_SYS_FLASH_BASE;
#endif
memset(&flash_info[i], 0, sizeof(flash_info_t));
@@ -87,12 +87,12 @@
size += flash_info[i].size;
}
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
- flash_get_info(CFG_MONITOR_BASE));
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+ flash_get_info(CONFIG_SYS_MONITOR_BASE));
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
@@ -164,13 +164,13 @@
int i;
flash_info_t * info;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
info = & flash_info[i];
if (info->start[0] <= base && base < info->start[0] + info->size)
break;
}
- return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+ return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
}
/*-----------------------------------------------------------------------
@@ -476,7 +476,7 @@
udelay (1000);
while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
if (intel) {
@@ -490,14 +490,14 @@
}
/* show that we're waiting */
- if ((get_timer(last)) > CFG_HZ) {/* every second */
+ if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
putc ('.');
last = get_timer(0);
}
}
/* show that we're waiting */
- if ((get_timer(last)) > CFG_HZ) { /* every second */
+ if ((get_timer(last)) > CONFIG_SYS_HZ) { /* every second */
putc ('.');
last = get_timer(0);
}
@@ -601,7 +601,7 @@
/* data polling for D7 */
while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*dest = (FPW)0x00F000F0; /* reset bank */
res = 1;
}
@@ -647,7 +647,7 @@
start = get_timer (0);
while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*dest = (FPW)0x00B000B0; /* Suspend program */
res = 1;
}
diff --git a/board/atc/ti113x.c b/board/atc/ti113x.c
index e112eca..473bb10 100644
--- a/board/atc/ti113x.c
+++ b/board/atc/ti113x.c
@@ -526,8 +526,8 @@
mem.map = 0;
mem.flags = MAP_ATTRIB | MAP_ACTIVE;
mem.speed = 300;
- mem.sys_start = CFG_PCMCIA_MEM_ADDR;
- mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+ mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
+ mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
mem.card_start = 0;
i365_set_mem_map (&socket, &mem);
@@ -613,8 +613,8 @@
{
u_int tmp[2];
u_int *mem = (void *) socket.cb_phys;
- u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
- u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+ u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
+ u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
pci_read_config_dword (dev, 0x00, tmp + 0);
pci_read_config_dword (dev, 0x80, tmp + 1);
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index 787d64d..544c932 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -147,9 +147,9 @@
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
AT91_SMC_DBW_8 |
#endif
AT91_SMC_TDF_(1));
diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c
index 1dec558..cc2263b 100644
--- a/board/atmel/at91cap9adk/nand.c
+++ b/board/atmel/at91cap9adk/nand.c
@@ -62,7 +62,7 @@
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
nand->cmd_ctrl = at91cap9adk_nand_hwcontrol;
diff --git a/board/atmel/at91cap9adk/partition.c b/board/atmel/at91cap9adk/partition.c
index eb1a724..7e1d46f 100644
--- a/board/atmel/at91cap9adk/partition.c
+++ b/board/atmel/at91cap9adk/partition.c
@@ -23,10 +23,10 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
};
/*define the area offsets*/
diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c
index ef8d9a8..902c3c4 100644
--- a/board/atmel/at91rm9200dk/flash.c
+++ b/board/atmel/at91rm9200dk/flash.c
@@ -59,7 +59,7 @@
{ 127, 64*1024 }, /* 127 * 64 kBytes sectors */
};
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/* AT49BV1614A Codes */
#define FLASH_CODE1 0xAA
@@ -77,8 +77,8 @@
#define CMD_UNLOCK_BYPASS 0x0020
#define CMD_SECTOR_UNLOCK 0x0070
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1)))
+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1)))
+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1)))
#define BIT_ERASE_DONE 0x0080
#define BIT_RDY_MASK 0x0080
@@ -99,9 +99,9 @@
MEM_FLASH_ADDR2 = FLASH_CODE2;
MEM_FLASH_ADDR1 = ID_IN_CODE;
- manuf_code = *(volatile u16 *) CFG_FLASH_BASE;
- device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2);
- add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1));
+ manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE;
+ device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2);
+ add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1));
MEM_FLASH_ADDR1 = FLASH_CODE1;
MEM_FLASH_ADDR2 = FLASH_CODE2;
@@ -157,7 +157,7 @@
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_identification (&flash_info[i]);
@@ -216,8 +216,8 @@
/* Protect binary boot image */
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + CFG_BOOT_SIZE - 1, &flash_info[0]);
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + CONFIG_SYS_BOOT_SIZE - 1, &flash_info[0]);
/* Protect environment variables */
flash_protect (FLAG_PROTECT_SET,
@@ -226,8 +226,8 @@
/* Protect U-Boot gzipped image */
flash_protect (FLAG_PROTECT_SET,
- CFG_U_BOOT_BASE,
- CFG_U_BOOT_BASE + CFG_U_BOOT_SIZE - 1, &flash_info[0]);
+ CONFIG_SYS_U_BOOT_BASE,
+ CONFIG_SYS_U_BOOT_BASE + CONFIG_SYS_U_BOOT_SIZE - 1, &flash_info[0]);
return size;
}
@@ -345,7 +345,7 @@
result = *addr;
/* check timeout */
- if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
chip1 = TMO;
break;
@@ -433,7 +433,7 @@
result = *addr;
/* check timeout */
- if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
chip1 = ERR | TMO;
break;
}
diff --git a/board/atmel/at91rm9200dk/partition.c b/board/atmel/at91rm9200dk/partition.c
index 975be17..c739b11 100644
--- a/board/atmel/at91rm9200dk/partition.c
+++ b/board/atmel/at91rm9200dk/partition.c
@@ -23,11 +23,11 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
- {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
};
/*define the area offsets*/
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 913e3fb..372cfb2 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -92,9 +92,9 @@
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
AT91_SMC_DBW_8 |
#endif
AT91_SMC_TDF_(2));
diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c
index 665e35c..c5ac634 100644
--- a/board/atmel/at91sam9260ek/nand.c
+++ b/board/atmel/at91sam9260ek/nand.c
@@ -67,7 +67,7 @@
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9260ek/partition.c b/board/atmel/at91sam9260ek/partition.c
index 557d695..2629c67 100644
--- a/board/atmel/at91sam9260ek/partition.c
+++ b/board/atmel/at91sam9260ek/partition.c
@@ -23,11 +23,11 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
- {CFG_DATAFLASH_LOGIC_ADDR_CS1, 1}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
};
/*define the area offsets*/
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 647aab5..76f56d6 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -92,9 +92,9 @@
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
AT91_SMC_DBW_8 |
#endif
AT91_SMC_TDF_(2));
diff --git a/board/atmel/at91sam9261ek/nand.c b/board/atmel/at91sam9261ek/nand.c
index fccb9d7..06395ee 100644
--- a/board/atmel/at91sam9261ek/nand.c
+++ b/board/atmel/at91sam9261ek/nand.c
@@ -67,7 +67,7 @@
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
nand->cmd_ctrl = at91sam9261ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9261ek/partition.c b/board/atmel/at91sam9261ek/partition.c
index 975be17..c739b11 100644
--- a/board/atmel/at91sam9261ek/partition.c
+++ b/board/atmel/at91sam9261ek/partition.c
@@ -23,11 +23,11 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
- {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
};
/*define the area offsets*/
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index c705074..dd513b9 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -95,9 +95,9 @@
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
AT91_SMC_DBW_8 |
#endif
AT91_SMC_TDF_(2));
diff --git a/board/atmel/at91sam9263ek/nand.c b/board/atmel/at91sam9263ek/nand.c
index 250ec7f..3c247f6 100644
--- a/board/atmel/at91sam9263ek/nand.c
+++ b/board/atmel/at91sam9263ek/nand.c
@@ -67,7 +67,7 @@
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
nand->cmd_ctrl = at91sam9263ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9263ek/partition.c b/board/atmel/at91sam9263ek/partition.c
index eb1a724..7e1d46f 100644
--- a/board/atmel/at91sam9263ek/partition.c
+++ b/board/atmel/at91sam9263ek/partition.c
@@ -23,10 +23,10 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
};
/*define the area offsets*/
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index 509e7c3..7bf1f43 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -92,9 +92,9 @@
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
AT91_SMC_DBW_8 |
#endif
AT91_SMC_TDF_(2));
diff --git a/board/atmel/at91sam9rlek/nand.c b/board/atmel/at91sam9rlek/nand.c
index eb342b8..625f6ec 100644
--- a/board/atmel/at91sam9rlek/nand.c
+++ b/board/atmel/at91sam9rlek/nand.c
@@ -67,7 +67,7 @@
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
nand->cmd_ctrl = at91sam9rlek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9rlek/partition.c b/board/atmel/at91sam9rlek/partition.c
index eb1a724..7e1d46f 100644
--- a/board/atmel/at91sam9rlek/partition.c
+++ b/board/atmel/at91sam9rlek/partition.c
@@ -23,10 +23,10 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
};
/*define the area offsets*/
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index e2bfd4a..4d380f3 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -55,17 +55,17 @@
unsigned long addr;
unsigned int i;
- flash_info[0].size = CFG_FLASH_SIZE;
+ flash_info[0].size = CONFIG_SYS_FLASH_SIZE;
flash_info[0].sector_count = 135;
- flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
+ flash_identify(uncached((void *)CONFIG_SYS_FLASH_BASE), &flash_info[0]);
for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
flash_info[0].start[i] = addr;
for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
flash_info[0].start[i] = addr;
- return CFG_FLASH_SIZE;
+ return CONFIG_SYS_FLASH_SIZE;
}
void flash_print_info(flash_info_t *info)
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c
index 337cf31..2ef19ce 100644
--- a/board/atum8548/atum8548.c
+++ b/board/atum8548/atum8548.c
@@ -50,9 +50,9 @@
int checkboard (void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
- volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
- volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+ volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
if ((uint)&gur->porpllsr != 0xe00e0000) {
printf("immap size error %lx\n",(ulong)&gur->porpllsr);
@@ -73,15 +73,15 @@
************************************************************************/
long int fixed_sdram (void)
{
- volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
+ volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
- ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
- ddr->cs0_config = CFG_DDR_CS0_CONFIG;
- ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
- ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
- ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
- ddr->sdram_mode = CFG_DDR_MODE;
- ddr->sdram_interval = CFG_DDR_INTERVAL;
+ ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+ ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+ ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+ ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+ ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+ ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
+ ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
#if defined (CONFIG_DDR_ECC)
ddr->err_disable = 0x0000000D;
ddr->err_sbe = 0x00ff0000;
@@ -90,13 +90,13 @@
udelay(500);
#if defined (CONFIG_DDR_ECC)
/* Enable ECC checking */
- ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+ ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
#else
- ddr->sdram_cfg = CFG_DDR_CONTROL;
+ ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
#endif
asm("sync; isync; msync");
udelay(500);
- return CFG_SDRAM_SIZE * 1024 * 1024;
+ return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
}
#endif /* !defined(CONFIG_SPD_EEPROM) */
@@ -127,17 +127,17 @@
return dram_size;
}
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
int
testdram(void)
{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+ uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
uint *p;
printf("Testing DRAM from 0x%08x to 0x%08x\n",
- CFG_MEMTEST_START,
- CFG_MEMTEST_END);
+ CONFIG_SYS_MEMTEST_START,
+ CONFIG_SYS_MEMTEST_END);
printf("DRAM test phase 1:\n");
for (p = pstart; p < pend; p++) {
@@ -185,7 +185,7 @@
void
pci_init_board(void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
uint devdisr = gur->devdisr;
uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
@@ -210,7 +210,7 @@
#ifdef CONFIG_PCIE1
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pcie1_hose;
int pcie_ep = (host_agent == 5);
@@ -228,32 +228,32 @@
/* inbound */
pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
+ CONFIG_SYS_PCI_MEMORY_BUS,
+ CONFIG_SYS_PCI_MEMORY_PHYS,
+ CONFIG_SYS_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* outbound memory */
pci_set_region(hose->regions + 1,
- CFG_PCIE1_MEM_BASE,
- CFG_PCIE1_MEM_PHYS,
- CFG_PCIE1_MEM_SIZE,
+ CONFIG_SYS_PCIE1_MEM_BASE,
+ CONFIG_SYS_PCIE1_MEM_PHYS,
+ CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(hose->regions + 2,
- CFG_PCIE1_IO_BASE,
- CFG_PCIE1_IO_PHYS,
- CFG_PCIE1_IO_SIZE,
+ CONFIG_SYS_PCIE1_IO_BASE,
+ CONFIG_SYS_PCIE1_IO_PHYS,
+ CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 3;
-#ifdef CFG_PCIE1_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE1_MEM_BASE2
/* outbound memory */
pci_set_region(hose->regions + 3,
- CFG_PCIE1_MEM_BASE2,
- CFG_PCIE1_MEM_PHYS2,
- CFG_PCIE1_MEM_SIZE2,
+ CONFIG_SYS_PCIE1_MEM_BASE2,
+ CONFIG_SYS_PCIE1_MEM_PHYS2,
+ CONFIG_SYS_PCIE1_MEM_SIZE2,
PCI_REGION_MEM);
hose->region_count++;
#endif
@@ -278,7 +278,7 @@
#ifdef CONFIG_PCI1
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pci1_hose;
@@ -301,23 +301,23 @@
/* inbound */
pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
+ CONFIG_SYS_PCI_MEMORY_BUS,
+ CONFIG_SYS_PCI_MEMORY_PHYS,
+ CONFIG_SYS_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
/* outbound memory */
pci_set_region(hose->regions + 1,
- CFG_PCI1_MEM_BASE,
- CFG_PCI1_MEM_PHYS,
- CFG_PCI1_MEM_SIZE,
+ CONFIG_SYS_PCI1_MEM_BASE,
+ CONFIG_SYS_PCI1_MEM_PHYS,
+ CONFIG_SYS_PCI1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(hose->regions + 2,
- CFG_PCI1_IO_BASE,
- CFG_PCI1_IO_PHYS,
- CFG_PCI1_IO_SIZE,
+ CONFIG_SYS_PCI1_IO_BASE,
+ CONFIG_SYS_PCI1_IO_PHYS,
+ CONFIG_SYS_PCI1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 3;
hose->first_busno=first_free_busno;
@@ -337,27 +337,27 @@
#ifdef CONFIG_PCI2
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pci2_hose;
if (!(devdisr & MPC85xx_DEVDISR_PCI2)) {
pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
+ CONFIG_SYS_PCI_MEMORY_BUS,
+ CONFIG_SYS_PCI_MEMORY_PHYS,
+ CONFIG_SYS_PCI_MEMORY_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
pci_set_region(hose->regions + 1,
- CFG_PCI2_MEM_BASE,
- CFG_PCI2_MEM_PHYS,
- CFG_PCI2_MEM_SIZE,
+ CONFIG_SYS_PCI2_MEM_BASE,
+ CONFIG_SYS_PCI2_MEM_PHYS,
+ CONFIG_SYS_PCI2_MEM_SIZE,
PCI_REGION_MEM);
pci_set_region(hose->regions + 2,
- CFG_PCI2_IO_BASE,
- CFG_PCI2_IO_PHYS,
- CFG_PCI2_IO_SIZE,
+ CONFIG_SYS_PCI2_IO_BASE,
+ CONFIG_SYS_PCI2_IO_PHYS,
+ CONFIG_SYS_PCI2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 3;
hose->first_busno=first_free_busno;
diff --git a/board/atum8548/law.c b/board/atum8548/law.c
index b66fd7b..b70b091 100644
--- a/board/atum8548/law.c
+++ b/board/atum8548/law.c
@@ -48,14 +48,14 @@
*/
struct law_entry law_table[] = {
- SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
- SET_LAW(CFG_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1),
- SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
- SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
- SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
- SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1),
+ SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+ SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
- SET_LAW(CFG_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CONFIG_SYS_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/atum8548/tlb.c b/board/atum8548/tlb.c
index 1ef4de4..ef7942c 100644
--- a/board/atum8548/tlb.c
+++ b/board/atum8548/tlb.c
@@ -28,16 +28,16 @@
struct fsl_e_tlb_entry tlb_table[] = {
/* TLB 0 - for temp stack in cache */
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 0, BOOKE_PAGESZ_4K, 0),
@@ -47,11 +47,11 @@
* 0xf8000000 128M FLASH
* Out of reset this entry is only 4K.
*/
- SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x4000000, CFG_FLASH_BASE + 0x4000000,
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x4000000, CONFIG_SYS_FLASH_BASE + 0x4000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_64M, 1),
- SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 1, BOOKE_PAGESZ_64M, 1),
@@ -59,7 +59,7 @@
* TLB 2: 1G Non-cacheable, guarded
* 0x80000000 1G PCI1/PCIE 8,9,a,b
*/
- SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS,
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS, CONFIG_SYS_PCI_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 2, BOOKE_PAGESZ_1G, 1),
@@ -67,11 +67,11 @@
* TLB 3, 4: 512M Non-cacheable, guarded
* 0xc0000000 1G PCI2
*/
- SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS,
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 3, BOOKE_PAGESZ_256M, 1),
- SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000,
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_256M, 1),
@@ -82,7 +82,7 @@
* 0xe210_0000 1M PCI2 IO
* 0xe300_0000 1M PCIe IO
*/
- SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 5, BOOKE_PAGESZ_64M, 1),
};
diff --git a/board/barco/barco.c b/board/barco/barco.c
index f8b2084..ed35572 100644
--- a/board/barco/barco.c
+++ b/board/barco/barco.c
@@ -90,7 +90,7 @@
long mear1;
long emear1;
- size = get_ram_size (CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+ size = get_ram_size (CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
new_bank0_end = size - 1;
mear1 = mpc824x_mpc107_getreg (MEAR1);
@@ -188,14 +188,14 @@
unsigned scan_flash (void)
{
char section[] = "kernel";
- int cfgFileLen = (CFG_FLASH_ERASE_SECTOR_LENGTH >> 1);
+ int cfgFileLen = (CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH >> 1);
int sectionPtr = 0;
int foundItem = 0; /* 0: None, 1: section found, 2: "=" found */
int bufPtr;
unsigned char *buf;
- buf = (unsigned char*)(CFG_FLASH_RANGE_BASE + CFG_FLASH_RANGE_SIZE \
- - CFG_FLASH_ERASE_SECTOR_LENGTH);
+ buf = (unsigned char*)(CONFIG_SYS_FLASH_RANGE_BASE + CONFIG_SYS_FLASH_RANGE_SIZE \
+ - CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH);
for (bufPtr = 0; bufPtr < cfgFileLen; ++bufPtr) {
if ((buf[bufPtr]==0xFF) && (*(int*)(buf+bufPtr)==0xFFFFFFFF)) {
return BOOT_DEFAULT;
@@ -236,14 +236,14 @@
switch (bootimage) {
case TRY_WORKING:
- info->address = CFG_WORKING_KERNEL_ADDRESS;
+ info->address = CONFIG_SYS_WORKING_KERNEL_ADDRESS;
break;
case BOOT_WORKING :
- info->address = CFG_WORKING_KERNEL_ADDRESS;
+ info->address = CONFIG_SYS_WORKING_KERNEL_ADDRESS;
break;
case BOOT_DEFAULT:
default:
- info->address= CFG_DEFAULT_KERNEL_ADDRESS;
+ info->address= CONFIG_SYS_DEFAULT_KERNEL_ADDRESS;
}
info->size = *((unsigned int *)(info->address ));
diff --git a/board/barco/barco_svc.h b/board/barco/barco_svc.h
index bd924f2..e103260 100644
--- a/board/barco/barco_svc.h
+++ b/board/barco/barco_svc.h
@@ -38,16 +38,16 @@
#include <asm/io.h>
/* Defines for the barcohydra board */
-#ifndef CFG_FLASH_ERASE_SECTOR_LENGTH
-#define CFG_FLASH_ERASE_SECTOR_LENGTH (0x10000)
+#ifndef CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH
+#define CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH (0x10000)
#endif
-#ifndef CFG_DEFAULT_KERNEL_ADDRESS
-#define CFG_DEFAULT_KERNEL_ADDRESS (CFG_FLASH_BASE + 0x30000)
+#ifndef CONFIG_SYS_DEFAULT_KERNEL_ADDRESS
+#define CONFIG_SYS_DEFAULT_KERNEL_ADDRESS (CONFIG_SYS_FLASH_BASE + 0x30000)
#endif
-#ifndef CFG_WORKING_KERNEL_ADDRESS
-#define CFG_WORKING_KERNEL_ADDRESS (0xFFE00000)
+#ifndef CONFIG_SYS_WORKING_KERNEL_ADDRESS
+#define CONFIG_SYS_WORKING_KERNEL_ADDRESS (0xFFE00000)
#endif
diff --git a/board/barco/early_init.S b/board/barco/early_init.S
index 07dafb7..531dcdf 100644
--- a/board/barco/early_init.S
+++ b/board/barco/early_init.S
@@ -32,68 +32,68 @@
#if defined(USE_DINK32)
/* We are running from RAM, so do not clear the MCCR1_MEMGO bit! */
- #define MCCR1VAL ((CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT) | MCCR1_MEMGO)
+ #define MCCR1VAL ((CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT) | MCCR1_MEMGO)
#else
- #define MCCR1VAL (CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT)
+ #define MCCR1VAL (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT)
#endif
.text
/* Values to program into memory controller registers */
tbl: .long MCCR1, MCCR1VAL
- .long MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT
+ .long MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT
.long MCCR3
- .long (((CFG_BSTOPRE & 0x000000f0) >> 4) << MCCR3_BSTOPRE2TO5_SHIFT) | \
- (CFG_REFREC << MCCR3_REFREC_SHIFT) | \
- (CFG_RDLAT << MCCR3_RDLAT_SHIFT)
+ .long (((CONFIG_SYS_BSTOPRE & 0x000000f0) >> 4) << MCCR3_BSTOPRE2TO5_SHIFT) | \
+ (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) | \
+ (CONFIG_SYS_RDLAT << MCCR3_RDLAT_SHIFT)
.long MCCR4
- .long (CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | \
- (CFG_REGISTERD_TYPE_BUFFER << 20) | \
- (((CFG_BSTOPRE & 0x00000300) >> 8) << MCCR4_BSTOPRE0TO1_SHIFT ) | \
- ((CFG_SDMODE_CAS_LAT << 4) | (CFG_SDMODE_WRAP << 3) | \
- (CFG_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | \
- (CFG_ACTTORW << MCCR4_ACTTORW_SHIFT) | \
- ((CFG_BSTOPRE & 0x0000000f) << MCCR4_BSTOPRE6TO9_SHIFT )
+ .long (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | \
+ (CONFIG_SYS_REGISTERD_TYPE_BUFFER << 20) | \
+ (((CONFIG_SYS_BSTOPRE & 0x00000300) >> 8) << MCCR4_BSTOPRE0TO1_SHIFT ) | \
+ ((CONFIG_SYS_SDMODE_CAS_LAT << 4) | (CONFIG_SYS_SDMODE_WRAP << 3) | \
+ (CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | \
+ (CONFIG_SYS_ACTTORW << MCCR4_ACTTORW_SHIFT) | \
+ ((CONFIG_SYS_BSTOPRE & 0x0000000f) << MCCR4_BSTOPRE6TO9_SHIFT )
.long MSAR1
- .long (((CFG_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
- (((CFG_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
- (((CFG_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
- (((CFG_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+ .long (((CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
+ (((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
+ (((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+ (((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
.long EMSAR1
- .long (((CFG_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
- (((CFG_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
- (((CFG_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
- (((CFG_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+ .long (((CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
+ (((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
+ (((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+ (((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
.long MSAR2
- .long (((CFG_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
- (((CFG_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
- (((CFG_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
- (((CFG_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+ .long (((CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
+ (((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
+ (((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+ (((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
.long EMSAR2
- .long (((CFG_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
- (((CFG_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
- (((CFG_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
- (((CFG_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+ .long (((CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
+ (((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
+ (((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+ (((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
.long MEAR1
- .long (((CFG_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
- (((CFG_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
- (((CFG_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
- (((CFG_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+ .long (((CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
+ (((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
+ (((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+ (((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
.long EMEAR1
- .long (((CFG_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
- (((CFG_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
- (((CFG_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
- (((CFG_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+ .long (((CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
+ (((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
+ (((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+ (((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
.long MEAR2
- .long (((CFG_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
- (((CFG_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
- (((CFG_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
- (((CFG_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+ .long (((CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
+ (((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
+ (((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+ (((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
.long EMEAR2
- .long (((CFG_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
- (((CFG_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
- (((CFG_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
- (((CFG_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+ .long (((CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
+ (((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
+ (((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+ (((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
.long 0
@@ -123,7 +123,7 @@
/* set bank enable bits */
lis r0, MBER@h
ori r0, 0, MBER@l
- li r1, CFG_BANK_ENABLE
+ li r1, CONFIG_SYS_BANK_ENABLE
stwbrx r0, 0, r3
eieio
stb r1, 0(r4)
@@ -145,8 +145,8 @@
eieio
/* set up stack pointer */
- lis r1, CFG_INIT_SP_OFFSET@h
- ori r1, r1, CFG_INIT_SP_OFFSET@l
+ lis r1, CONFIG_SYS_INIT_SP_OFFSET@h
+ ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
mtlr r10
blr
diff --git a/board/barco/flash.c b/board/barco/flash.c
index 53fc58c..c9efb15 100644
--- a/board/barco/flash.c
+++ b/board/barco/flash.c
@@ -56,11 +56,11 @@
#define ROM_CS0_START 0xFF800000
#define ROM_CS1_START 0xFF000000
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
# endif
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
@@ -140,10 +140,10 @@
{
unsigned long i;
unsigned char j;
- static const ulong flash_banks[] = CFG_FLASH_BANKS;
+ static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++){
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++){
flash_info_t * const pflinfo = &flash_info[i];
pflinfo->flash_id = FLASH_UNKNOWN;
pflinfo->size = 0;
@@ -217,10 +217,10 @@
break;
}
/* Protect monitor and environment sectors */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[0]);
#endif
@@ -458,7 +458,7 @@
addr = (FLASH_WORD_SIZE *)(info->start[0] + (
(info->start[l_sect] - info->start[0]) << sh8b));
while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -599,7 +599,7 @@
start = get_timer (0);
while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
(data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
index 7ddf74c..6fb0096 100644
--- a/board/bc3450/bc3450.c
+++ b/board/bc3450/bc3450.c
@@ -53,7 +53,7 @@
void ps2mult_early_init(void);
#endif
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
static void sdram_start (int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -100,7 +100,7 @@
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
@@ -109,7 +109,7 @@
{
ulong dramsize = 0;
ulong dramsize2 = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
/* setup SDRAM chip selects */
@@ -130,9 +130,9 @@
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+ test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
sdram_start(1);
- test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+ test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
@@ -158,9 +158,9 @@
/* find RAM size using SDRAM CS1 only */
sdram_start(0);
- test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+ test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
sdram_start(1);
- test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+ test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
if (test1 > test2) {
sdram_start(0);
dramsize2 = test1;
@@ -181,7 +181,7 @@
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
}
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
/* retrieve size of memory connected to SDRAM CS0 */
dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -199,7 +199,7 @@
dramsize2 = 0;
}
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
return dramsize;
}
@@ -209,7 +209,7 @@
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
/* setup and enable SDRAM chip selects */
@@ -228,9 +228,9 @@
/* find RAM size */
sdram_start(0);
- test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
sdram_start(1);
- test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
@@ -241,12 +241,12 @@
/* set SDRAM end address according to size */
*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
/* Retrieve amount of SDRAM available */
dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
return dramsize;
}
@@ -405,34 +405,34 @@
*/
/* save original SRAM content */
- save = *(volatile u16 *)CFG_CS2_START;
+ save = *(volatile u16 *)CONFIG_SYS_CS2_START;
restore = 1;
/* write test pattern to SRAM */
- *(volatile u16 *)CFG_CS2_START = 0xA5A5;
+ *(volatile u16 *)CONFIG_SYS_CS2_START = 0xA5A5;
__asm__ volatile ("sync");
/*
* Put a different pattern on the data lines: otherwise they may float
* long enough to read back what we wrote.
*/
- tmp = *(volatile u16 *)CFG_FLASH_BASE;
+ tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
if (tmp == 0xA5A5)
puts ("!! possible error in SRAM detection\n");
- if (*(volatile u16 *)CFG_CS2_START != 0xA5A5) {
+ if (*(volatile u16 *)CONFIG_SYS_CS2_START != 0xA5A5) {
/* no SRAM at all, disable cs */
*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 18);
*(vu_long *)MPC5XXX_CS2_START = 0x0000FFFF;
*(vu_long *)MPC5XXX_CS2_STOP = 0x0000FFFF;
restore = 0;
__asm__ volatile ("sync");
- } else if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0xA5A5) {
+ } else if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0xA5A5) {
/* make sure that we access a mirrored address */
- *(volatile u16 *)CFG_CS2_START = 0x1111;
+ *(volatile u16 *)CONFIG_SYS_CS2_START = 0x1111;
__asm__ volatile ("sync");
- if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0x1111) {
+ if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0x1111) {
/* SRAM size = 512 kByte */
- *(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CFG_CS2_START,
+ *(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CONFIG_SYS_CS2_START,
0x80000);
__asm__ volatile ("sync");
puts ("SRAM: 512 kB\n");
@@ -444,7 +444,7 @@
}
/* restore origianl SRAM content */
if (restore) {
- *(volatile u16 *)CFG_CS2_START = save;
+ *(volatile u16 *)CONFIG_SYS_CS2_START = save;
__asm__ volatile ("sync");
}
@@ -453,21 +453,21 @@
*/
/* save origianl FB content */
- save = *(volatile u16 *)CFG_CS1_START;
+ save = *(volatile u16 *)CONFIG_SYS_CS1_START;
restore = 1;
/* write test pattern to FB memory */
- *(volatile u16 *)CFG_CS1_START = 0xA5A5;
+ *(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5;
__asm__ volatile ("sync");
/*
* Put a different pattern on the data lines: otherwise they may float
* long enough to read back what we wrote.
*/
- tmp = *(volatile u16 *)CFG_FLASH_BASE;
+ tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
if (tmp == 0xA5A5)
puts ("!! possible error in grafic controller detection\n");
- if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) {
+ if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) {
/* no grafic controller at all, disable cs */
*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 17);
*(vu_long *)MPC5XXX_CS1_START = 0x0000FFFF;
@@ -479,7 +479,7 @@
}
/* restore origianl FB content */
if (restore) {
- *(volatile u16 *)CFG_CS1_START = save;
+ *(volatile u16 *)CONFIG_SYS_CS1_START = save;
__asm__ volatile ("sync");
}
@@ -607,21 +607,21 @@
*/
/* save origianl FB content */
- save = *(volatile u16 *)CFG_CS1_START;
+ save = *(volatile u16 *)CONFIG_SYS_CS1_START;
restore = 1;
/* write test pattern to FB memory */
- *(volatile u16 *)CFG_CS1_START = 0xA5A5;
+ *(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5;
__asm__ volatile ("sync");
/*
* Put a different pattern on the data lines: otherwise they may float
* long enough to read back what we wrote.
*/
- tmp = *(volatile u16 *)CFG_FLASH_BASE;
+ tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
if (tmp == 0xA5A5)
puts ("!! possible error in grafic controller detection\n");
- if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) {
+ if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) {
/* no grafic controller found */
restore = 0;
ret = 0;
@@ -630,7 +630,7 @@
}
if (restore) {
- *(volatile u16 *)CFG_CS1_START = save;
+ *(volatile u16 *)CONFIG_SYS_CS1_START = save;
__asm__ volatile ("sync");
}
return ret;
diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
index 48bc65d..ae5061f 100644
--- a/board/bc3450/cmd_bc3450.c
+++ b/board/bc3450/cmd_bc3450.c
@@ -52,9 +52,9 @@
#define THERM_WRITE_TL 0x02
#define THERM_WRITE_TH 0x01
-#define CFG_CPU 2
-#define CFG_1SHOT 1
-#define CFG_STANDALONE 0
+#define CONFIG_SYS_CPU 2
+#define CONFIG_SYS_1SHOT 1
+#define CONFIG_SYS_STANDALONE 0
struct therm {
int hi;
@@ -513,7 +513,7 @@
therm.hi <<= 1;
therm.lo <<= 1;
ds1620_write_state (&therm);
- ds1620_out (THERM_WRITE_CONFIG, 8, CFG_STANDALONE);
+ ds1620_out (THERM_WRITE_CONFIG, 8, CONFIG_SYS_STANDALONE);
return 0;
}
}
@@ -538,9 +538,9 @@
static int init_done = 0;
int i;
struct mpc5xxx_mscan *can1 =
- (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0900);
+ (struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0900);
struct mpc5xxx_mscan *can2 =
- (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0980);
+ (struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0980);
/* GPIO configuration of the CAN pins is done in BC3450.h */
@@ -686,9 +686,9 @@
{
int i;
struct mpc5xxx_mscan *can1 =
- (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0900);
+ (struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0900);
struct mpc5xxx_mscan *can2 =
- (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0980);
+ (struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0980);
/* send a message on CAN1 */
can1->cantbsel = 0x01;
diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c
index 583560a..42c4b50 100644
--- a/board/bf533-ezkit/bf533-ezkit.c
+++ b/board/bf533-ezkit/bf533-ezkit.c
@@ -50,12 +50,12 @@
printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
"tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
3, 3, 6, 2, 3);
- printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
- printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+ printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
+ printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20);
#endif
- gd->bd->bi_memstart = CFG_SDRAM_BASE;
- gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
- return CFG_MAX_RAM_SIZE;
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+ return CONFIG_SYS_MAX_RAM_SIZE;
}
#if defined(CONFIG_MISC_INIT_R)
@@ -63,10 +63,10 @@
int misc_init_r(void)
{
/* Set direction bits for Video en/decoder reset as output */
- *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DIR) =
+ *(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DIR) =
PSDA_VDEC_RST | PSDA_VENC_RST;
/* Deactivate Video en/decoder reset lines */
- *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DOUT) =
+ *(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DOUT) =
PSDA_VDEC_RST | PSDA_VENC_RST;
return 0;
diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h
index 4e043e0..1a4aa5f 100644
--- a/board/bf533-ezkit/flash-defines.h
+++ b/board/bf533-ezkit/flash-defines.h
@@ -49,10 +49,10 @@
#define FLASH_TOT_SECT 40
#define FLASH_SIZE 0x220000
#define FLASH_MAN_ST 2
-#define CFG_FLASH0_BASE 0x20000000
+#define CONFIG_SYS_FLASH0_BASE 0x20000000
#define RESET_VAL 0xF0
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
int get_codes(void);
int poll_toggle_bit(long lOffset);
diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c
index cdf4dc6..a861e16 100644
--- a/board/bf533-ezkit/flash.c
+++ b/board/bf533-ezkit/flash.c
@@ -82,7 +82,7 @@
size_b0 = size_b1 = size_b2 = 0;
#ifdef DEBUG
- printf("Flash Memory Start 0x%x\n", CFG_FLASH_BASE);
+ printf("Flash Memory Start 0x%x\n", CONFIG_SYS_FLASH_BASE);
printf("Memory Map for the Flash\n");
printf("0x20000000 - 0x200FFFFF Flash A Primary (1MB)\n");
printf("0x20100000 - 0x201FFFFF Flash B Primary (1MB)\n");
@@ -90,20 +90,20 @@
printf("0x20280000 - 0x2028FFFF Flash B Secondary (64KB)\n");
printf("Please type command flinfo for information on Sectors \n");
#endif
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
- size_b0 = flash_get_size(CFG_FLASH0_BASE, &flash_info[0], 0);
- size_b1 = flash_get_size(CFG_FLASH0_BASE, &flash_info[1], 1);
- size_b2 = flash_get_size(CFG_FLASH0_BASE, &flash_info[2], 2);
+ size_b0 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[0], 0);
+ size_b1 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[1], 1);
+ size_b2 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[2], 2);
if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size_b0, size_b0 >> 20);
}
- (void)flash_protect(FLAG_PROTECT_SET, CFG_FLASH0_BASE,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_FLASH0_BASE,
(flash_info[0].start[2] - 1), &flash_info[0]);
return (size_b0 + size_b1 + size_b2);
@@ -180,7 +180,7 @@
int ret;
int d;
if (addr % 2) {
- read_flash(addr - 1 - CFG_FLASH_BASE, &d);
+ read_flash(addr - 1 - CONFIG_SYS_FLASH_BASE, &d);
d = (int)((d & 0x00FF) | (*src++ << 8));
ret = write_data(addr - 1, 2, (uchar *) & d);
if (ret == FLASH_FAIL)
@@ -196,7 +196,7 @@
int write_data(long lStart, long lCount, uchar * pnData)
{
long i = 0;
- unsigned long ulOffset = lStart - CFG_FLASH_BASE;
+ unsigned long ulOffset = lStart - CONFIG_SYS_FLASH_BASE;
int d;
int nSector = 0;
int flag = 0;
@@ -285,7 +285,7 @@
{
long addr;
- addr = (CFG_FLASH_BASE + nOffset);
+ addr = (CONFIG_SYS_FLASH_BASE + nOffset);
SSYNC();
*(unsigned volatile short *)addr = nValue;
SSYNC();
@@ -297,7 +297,7 @@
int read_flash(long nOffset, int *pnValue)
{
int nValue = 0x0;
- long addr = (CFG_FLASH_BASE + nOffset);
+ long addr = (CONFIG_SYS_FLASH_BASE + nOffset);
if (nOffset != 0x2)
reset_flash();
@@ -396,7 +396,7 @@
if ((nBlock < 0) || (nBlock > AFP_NumSectors))
return FALSE;
- ulSectorOff = (address - CFG_FLASH_BASE);
+ ulSectorOff = (address - CONFIG_SYS_FLASH_BASE);
write_flash((WRITESEQ1 | ulSectorOff), WRITEDATA1);
write_flash((WRITESEQ2 | ulSectorOff), WRITEDATA2);
diff --git a/board/bf533-ezkit/psd4256.h b/board/bf533-ezkit/psd4256.h
index cc654b8..9b381d2 100644
--- a/board/bf533-ezkit/psd4256.h
+++ b/board/bf533-ezkit/psd4256.h
@@ -27,8 +27,8 @@
/*
* Flash A/B Port A configuration registers.
- * Addresses are offset values to CFG_FLASH1_BASE
- * for Flash A and CFG_FLASH2_BASE for Flash B.
+ * Addresses are offset values to CONFIG_SYS_FLASH1_BASE
+ * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B.
*/
#define PSD_PORTA_DIN 0x070000
@@ -37,8 +37,8 @@
/*
* Flash A/B Port B configuration registers
- * Addresses are offset values to CFG_FLASH1_BASE
- * for Flash A and CFG_FLASH2_BASE for Flash B.
+ * Addresses are offset values to CONFIG_SYS_FLASH1_BASE
+ * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B.
*/
#define PSD_PORTB_DIN 0x070001
diff --git a/board/bf533-ezkit/u-boot.lds.S b/board/bf533-ezkit/u-boot.lds.S
index 1fedbc5..538a19f 100644
--- a/board/bf533-ezkit/u-boot.lds.S
+++ b/board/bf533-ezkit/u-boot.lds.S
@@ -36,7 +36,7 @@
* for different CPU's which may lack non-cache L1 data.
*/
#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CFG_MONITOR_BASE
+# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
# define L1_DATA_B_SRAM_SIZE 0
#endif
@@ -45,7 +45,7 @@
/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
MEMORY
{
- ram : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN
+ ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
}
diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index 7a17dfa..a113c40 100644
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -56,11 +56,11 @@
(" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "
"CAS Latency:%d cycles\n", (SDRAM_tRCD >> 15), (SDRAM_tRP >> 11),
(SDRAM_tRAS >> 6), (SDRAM_tWR >> 19), (SDRAM_CL >> 2));
- printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
+ printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
printf("Bank size = %d MB\n", 128);
#endif
- gd->bd->bi_memstart = CFG_SDRAM_BASE;
- gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
return (gd->bd->bi_memsize);
}
diff --git a/board/bf533-stamp/u-boot.lds.S b/board/bf533-stamp/u-boot.lds.S
index 4e7fd7c..97ebd79 100644
--- a/board/bf533-stamp/u-boot.lds.S
+++ b/board/bf533-stamp/u-boot.lds.S
@@ -36,7 +36,7 @@
* for different CPU's which may lack non-cache L1 data.
*/
#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CFG_MONITOR_BASE
+# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
# define L1_DATA_B_SRAM_SIZE 0
#endif
@@ -45,7 +45,7 @@
/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
MEMORY
{
- ram : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN
+ ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
}
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index 4567213..7303f1b 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -109,12 +109,12 @@
printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
"tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
3, 3, 6, 2, 3);
- printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
- printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+ printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
+ printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20);
#endif
- gd->bd->bi_memstart = CFG_SDRAM_BASE;
- gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
- return CFG_MAX_RAM_SIZE;
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+ return CONFIG_SYS_MAX_RAM_SIZE;
}
#if defined(CONFIG_MISC_INIT_R)
@@ -236,11 +236,11 @@
erase_block_flash(n);
printf("OK\r");
printf("--------Program block:%2d...", n);
- write_data(CFG_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
+ write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
printf("OK\r");
printf("--------Verify block:%2d...", n);
for (i = 0; i < BLOCK_SIZE; i += 2) {
- if (*(unsigned short *)(CFG_FLASH_BASE + offset + i) !=
+ if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
*temp++) {
value = 1;
result = 1;
diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c
index 9800083..c597f2d 100644
--- a/board/bf537-stamp/nand.c
+++ b/board/bf537-stamp/nand.c
@@ -44,13 +44,13 @@
if (ctrl & NAND_CTRL_CHANGE) {
if( ctrl & NAND_CLE )
- IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_CLE;
+ IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_CLE;
else
- IO_ADDR_W = CFG_NAND_BASE;
+ IO_ADDR_W = CONFIG_SYS_NAND_BASE;
if( ctrl & NAND_ALE )
- IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_ALE;
+ IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_ALE;
else
- IO_ADDR_W = CFG_NAND_BASE;
+ IO_ADDR_W = CONFIG_SYS_NAND_BASE;
this->IO_ADDR_W = (void __iomem *) IO_ADDR_W;
}
this->IO_ADDR_R = this->IO_ADDR_W;
diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c
index fa11991..7c36c81 100644
--- a/board/bf537-stamp/post-memory.c
+++ b/board/bf537-stamp/post-memory.c
@@ -6,7 +6,7 @@
#include <post.h>
#include <watchdog.h>
-#if CONFIG_POST & CFG_POST_MEMORY
+#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
#define CLKIN 25000000
#define PATTERN1 0x5A5A5A5A
#define PATTERN2 0xAAAAAAAA
@@ -71,10 +71,10 @@
post_init_uart(sclk);
post_out_buff("\n\r\0");
post_out_buff(log[m][n]);
- for (addr = 0x0; addr < CFG_MAX_RAM_SIZE; addr += 4)
+ for (addr = 0x0; addr < CONFIG_SYS_MAX_RAM_SIZE; addr += 4)
*(unsigned long *)addr = PATTERN1;
post_out_buff("Reading...\0");
- for (addr = 0x0; addr < CFG_MAX_RAM_SIZE; addr += 4) {
+ for (addr = 0x0; addr < CONFIG_SYS_MAX_RAM_SIZE; addr += 4) {
if ((*(unsigned long *)addr) != PATTERN1) {
post_out_buff("Error\n\r\0");
ret = 0;
@@ -318,5 +318,5 @@
return mem_SDRRC;
}
-#endif /* CONFIG_POST & CFG_POST_MEMORY */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_MEMORY */
#endif /* CONFIG_POST */
diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c
index 7c73ddd..11a2803 100644
--- a/board/bf537-stamp/spi_flash.c
+++ b/board/bf537-stamp/spi_flash.c
@@ -412,7 +412,7 @@
*/
void spi_init_r(void)
{
-#if defined(CONFIG_POST) && (CONFIG_POST & CFG_POST_SPI)
+#if defined(CONFIG_POST) && (CONFIG_POST & CONFIG_SYS_POST_SPI)
/* Our testing strategy here is pretty basic:
* - fill src memory with an 8-bit pattern
* - write the src memory to the SPI flash
diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S
index 4e7fd7c..97ebd79 100644
--- a/board/bf537-stamp/u-boot.lds.S
+++ b/board/bf537-stamp/u-boot.lds.S
@@ -36,7 +36,7 @@
* for different CPU's which may lack non-cache L1 data.
*/
#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CFG_MONITOR_BASE
+# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
# define L1_DATA_B_SRAM_SIZE 0
#endif
@@ -45,7 +45,7 @@
/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
MEMORY
{
- ram : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN
+ ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
}
diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c
index 7345b42..a74ff0d 100644
--- a/board/bf561-ezkit/bf561-ezkit.c
+++ b/board/bf561-ezkit/bf561-ezkit.c
@@ -50,12 +50,12 @@
printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
"tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
3, 3, 6, 2, 3);
- printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
- printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+ printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
+ printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20);
#endif
- gd->bd->bi_memstart = CFG_SDRAM_BASE;
- gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
- return CFG_MAX_RAM_SIZE;
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+ return CONFIG_SYS_MAX_RAM_SIZE;
}
#if defined(CONFIG_MISC_INIT_R)
diff --git a/board/bf561-ezkit/u-boot.lds.S b/board/bf561-ezkit/u-boot.lds.S
index ab5ef08..3defef4 100644
--- a/board/bf561-ezkit/u-boot.lds.S
+++ b/board/bf561-ezkit/u-boot.lds.S
@@ -36,7 +36,7 @@
* for different CPU's which may lack non-cache L1 data.
*/
#ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM CFG_MONITOR_BASE
+# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
# define L1_DATA_B_SRAM_SIZE 0
#endif
@@ -45,7 +45,7 @@
/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
MEMORY
{
- ram : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN
+ ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
}
diff --git a/board/bmw/README b/board/bmw/README
index 1f04b1b..1fbef79 100644
--- a/board/bmw/README
+++ b/board/bmw/README
@@ -62,26 +62,26 @@
The following Block-Address-Translation (BAT) configuration
is recommended to access all I/O devices.
-#define CFG_IBAT0L (0x00000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U (0x00000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L (0x00000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (0x00000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT1L (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L CFG_IBAT0L
-#define CFG_DBAT0U CFG_IBAT0U
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
Interrupt Mappings
diff --git a/board/bmw/early_init.S b/board/bmw/early_init.S
index 57a06a9..63c29d5 100644
--- a/board/bmw/early_init.S
+++ b/board/bmw/early_init.S
@@ -86,10 +86,10 @@
/*
* Set up I/D BAT0
*/
- lis r4, CFG_DBAT0L@h
- ori r4, r4, CFG_DBAT0L@l
- lis r3, CFG_DBAT0U@h
- ori r3, r3, CFG_DBAT0U@l
+ lis r4, CONFIG_SYS_DBAT0L@h
+ ori r4, r4, CONFIG_SYS_DBAT0L@l
+ lis r3, CONFIG_SYS_DBAT0U@h
+ ori r3, r3, CONFIG_SYS_DBAT0U@l
mtdbat0l(r4)
isync
@@ -97,10 +97,10 @@
isync
sync
- lis r4, CFG_IBAT0L@h
- ori r4, r4, CFG_IBAT0L@l
- lis r3, CFG_IBAT0U@h
- ori r3, r3, CFG_IBAT0U@l
+ lis r4, CONFIG_SYS_IBAT0L@h
+ ori r4, r4, CONFIG_SYS_IBAT0L@l
+ lis r3, CONFIG_SYS_IBAT0U@h
+ ori r3, r3, CONFIG_SYS_IBAT0U@l
isync
mtibat0l(r4)
@@ -111,10 +111,10 @@
/*
* Set up I/D BAT1
*/
- lis r4, CFG_IBAT1L@h
- ori r4, r4, CFG_IBAT1L@l
- lis r3, CFG_IBAT1U@h
- ori r3, r3, CFG_IBAT1U@l
+ lis r4, CONFIG_SYS_IBAT1L@h
+ ori r4, r4, CONFIG_SYS_IBAT1L@l
+ lis r3, CONFIG_SYS_IBAT1U@h
+ ori r3, r3, CONFIG_SYS_IBAT1U@l
isync
mtibat1l(r4)
@@ -130,10 +130,10 @@
/*
* Set up I/D BAT2
*/
- lis r4, CFG_IBAT2L@h
- ori r4, r4, CFG_IBAT2L@l
- lis r3, CFG_IBAT2U@h
- ori r3, r3, CFG_IBAT2U@l
+ lis r4, CONFIG_SYS_IBAT2L@h
+ ori r4, r4, CONFIG_SYS_IBAT2L@l
+ lis r3, CONFIG_SYS_IBAT2U@h
+ ori r3, r3, CONFIG_SYS_IBAT2U@l
isync
mtibat2l(r4)
@@ -149,10 +149,10 @@
/*
* Setup I/D BAT3
*/
- lis r4, CFG_IBAT3L@h
- ori r4, r4, CFG_IBAT3L@l
- lis r3, CFG_IBAT3U@h
- ori r3, r3, CFG_IBAT3U@l
+ lis r4, CONFIG_SYS_IBAT3L@h
+ ori r4, r4, CONFIG_SYS_IBAT3L@l
+ lis r3, CONFIG_SYS_IBAT3U@h
+ ori r3, r3, CONFIG_SYS_IBAT3U@l
isync
mtibat3l(r4)
@@ -466,7 +466,7 @@
LOADPTR (r3, EUMBBAR)
stwbrx r3,0,r5
- LOADPTR (r4, CFG_EUMB_ADDR)
+ LOADPTR (r4, CONFIG_SYS_EUMB_ADDR)
stwbrx r4,0,r6
L1not8245:
diff --git a/board/bmw/flash.c b/board/bmw/flash.c
index 0d0bc2f..57ffe08 100644
--- a/board/bmw/flash.c
+++ b/board/bmw/flash.c
@@ -29,11 +29,11 @@
#define ROM_CS0_START 0xFF800000
#define ROM_CS1_START 0xFF000000
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
# endif
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
@@ -141,10 +141,10 @@
{
unsigned long i;
unsigned char j;
- static const ulong flash_banks[] = CFG_FLASH_BANKS;
+ static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
flash_info_t *const pflinfo = &flash_info[i];
pflinfo->flash_id = FLASH_UNKNOWN;
@@ -217,10 +217,10 @@
}
/* Protect monitor and environment sectors
*/
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[0]);
#endif
@@ -627,7 +627,7 @@
start[0]) << sh8b));
while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
(FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -766,7 +766,7 @@
start = get_timer (0);
while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) !=
(data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/bmw/ns16550.c b/board/bmw/ns16550.c
index 7064567..7250591 100644
--- a/board/bmw/ns16550.c
+++ b/board/bmw/ns16550.c
@@ -1,7 +1,7 @@
/*
* COM1 NS16550 support
* originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
*/
#include <config.h>
@@ -10,8 +10,8 @@
typedef struct NS16550 *NS16550_t;
const NS16550_t COM_PORTS[] =
- { (NS16550_t) ((CFG_EUMB_ADDR) + 0x4500),
-(NS16550_t) ((CFG_EUMB_ADDR) + 0x4600) };
+ { (NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4500),
+(NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4600) };
volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
{
diff --git a/board/bmw/ns16550.h b/board/bmw/ns16550.h
index 104f45b..210aea4 100644
--- a/board/bmw/ns16550.h
+++ b/board/bmw/ns16550.h
@@ -2,7 +2,7 @@
* NS16550 Serial Port
* originally from linux source (arch/ppc/boot/ns16550.h)
* modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
+ * have addresses as offsets from CONFIG_SYS_ISA_BASE
* added a few more definitions
* added prototypes for ns16550.c
* reduced no of com ports to 2
diff --git a/board/bmw/serial.c b/board/bmw/serial.c
index 712a95b..0c97f12 100644
--- a/board/bmw/serial.c
+++ b/board/bmw/serial.c
@@ -28,10 +28,10 @@
#if CONFIG_CONS_INDEX == 1
static struct NS16550 *console =
- (struct NS16550 *) (CFG_EUMB_ADDR + 0x4500);
+ (struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500);
#elif CONFIG_CONS_INDEX == 2
static struct NS16550 *console =
- (struct NS16550 *) (CFG_EUMB_ADDR + 0x4500);
+ (struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500);
#else
#error no valid console defined
#endif
diff --git a/board/c2mon/c2mon.c b/board/c2mon/c2mon.c
index 7d2f746..717a64b 100644
--- a/board/c2mon/c2mon.c
+++ b/board/c2mon/c2mon.c
@@ -110,7 +110,7 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long reg;
long int size8, size9;
@@ -124,17 +124,17 @@
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
- memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
memctl->memc_mar = 0x00000088;
/*
* Map controller bank 2 the SDRAM bank 2 at physical address 0.
*/
- memctl->memc_or2 = CFG_OR2_PRELIM;
- memctl->memc_br2 = CFG_BR2_PRELIM;
+ memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+ memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
- memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
@@ -154,7 +154,7 @@
*
* try 8 column mode
*/
- size8 = dram_size (CFG_MAMR_8COL,
+ size8 = dram_size (CONFIG_SYS_MAMR_8COL,
SDRAM_BASE2_PRELIM,
SDRAM_MAX_SIZE);
@@ -163,7 +163,7 @@
/*
* try 9 column mode
*/
- size9 = dram_size (CFG_MAMR_9COL,
+ size9 = dram_size (CONFIG_SYS_MAMR_9COL,
SDRAM_BASE2_PRELIM,
SDRAM_MAX_SIZE);
@@ -172,7 +172,7 @@
/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
} else { /* back to 8 columns */
size = size8;
- memctl->memc_mamr = CFG_MAMR_8COL;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
udelay (500);
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
}
@@ -185,15 +185,15 @@
*/
if (size < 0x02000000) {
/* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
udelay (1000);
}
/*
* Final mapping
*/
- memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
- memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+ memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+ memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
/*
* No bank 1
@@ -204,7 +204,7 @@
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
udelay (10000);
@@ -225,7 +225,7 @@
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
diff --git a/board/c2mon/flash.c b/board/c2mon/flash.c
index 7cc5ef0..d33cb6c 100644
--- a/board/c2mon/flash.c
+++ b/board/c2mon/flash.c
@@ -25,10 +25,10 @@
#include <mpc8xx.h>
#ifndef CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
#endif
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -42,13 +42,13 @@
unsigned long flash_init (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long size_b0, size_b1;
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -79,19 +79,19 @@
}
/* Remap FLASH according to real size */
- memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
- memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+ memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+ memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
/* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+ size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
- flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+ flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
@@ -104,21 +104,21 @@
#endif
if (size_b1) {
- memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
- memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+ memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
BR_MS_GPCM | BR_V;
/* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+ size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
&flash_info[1]);
- flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+ flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[1]);
#endif
@@ -436,7 +436,7 @@
last = start;
addr = (vu_long*)(info->start[l_sect]);
while ((addr[0] & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -559,7 +559,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/c2mon/pcmcia.c b/board/c2mon/pcmcia.c
index 57846b1..c833b20 100644
--- a/board/c2mon/pcmcia.c
+++ b/board/c2mon/pcmcia.c
@@ -22,8 +22,8 @@
volatile cpm8xx_t *cp;
ushort sreg;
- immap = (immap_t *)CFG_IMMR;
- cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+ immap = (immap_t *)CONFIG_SYS_IMMR;
+ cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
/*
* Configure Port C for TPS2211 PC-Card Power-Interface Switch
@@ -69,10 +69,10 @@
udelay(10000);
- immap = (immap_t *)CFG_IMMR;
- sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
- cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+ immap = (immap_t *)CONFIG_SYS_IMMR;
+ sysp = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+ cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
cfg_ports ();
@@ -175,8 +175,8 @@
debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
- immap = (immap_t *)CFG_IMMR;
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+ immap = (immap_t *)CONFIG_SYS_IMMR;
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
/* Configure PCMCIA General Control Register */
debug ("Disable PCMCIA buffers and assert RESET\n");
@@ -209,9 +209,9 @@
" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
- immap = (immap_t *)CFG_IMMR;
- cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+ immap = (immap_t *)CONFIG_SYS_IMMR;
+ cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
/*
* Disable PCMCIA buffers (isolate the interface)
* and assert RESET signal
diff --git a/board/canmb/canmb.c b/board/canmb/canmb.c
index d3711d0..dce07bf 100644
--- a/board/canmb/canmb.c
+++ b/board/canmb/canmb.c
@@ -34,7 +34,7 @@
#include "mt48lc16m32s2-75.h"
#endif
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
static void sdram_start (int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -77,7 +77,7 @@
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
@@ -86,7 +86,7 @@
{
ulong dramsize = 0;
ulong dramsize2 = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
/* setup SDRAM chip selects */
@@ -107,9 +107,9 @@
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
sdram_start(1);
- test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
@@ -135,10 +135,10 @@
/* find RAM size using SDRAM CS1 only */
if (!dramsize)
sdram_start(0);
- test2 = test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ test2 = test1 = get_ram_size((ulong *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
if (!dramsize) {
sdram_start(1);
- test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ test2 = get_ram_size((ulong *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
}
if (test1 > test2) {
sdram_start(0);
@@ -160,7 +160,7 @@
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
}
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
/* retrieve size of memory connected to SDRAM CS0 */
dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -178,7 +178,7 @@
dramsize2 = 0;
}
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
return dramsize + dramsize2;
}
@@ -188,7 +188,7 @@
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
/* setup and enable SDRAM chip selects */
@@ -207,9 +207,9 @@
/* find RAM size */
sdram_start(0);
- test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
sdram_start(1);
- test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
@@ -220,12 +220,12 @@
/* set SDRAM end address according to size */
*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
/* Retrieve amount of SDRAM available */
dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
return dramsize;
}
@@ -244,8 +244,8 @@
{
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
*(vu_long *)MPC5XXX_BOOTCS_START =
- *(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE);
+ *(vu_long *)MPC5XXX_CS0_START = START_REG(CONFIG_SYS_FLASH_BASE);
*(vu_long *)MPC5XXX_BOOTCS_STOP =
- *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
+ *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE);
return 0;
}
diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c
index 3ff19bc..a4b201e 100644
--- a/board/cerf250/flash.c
+++ b/board/cerf250/flash.c
@@ -28,7 +28,7 @@
#include <linux/byteorder/swab.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* Board support for 1 or 2 flash devices */
#define FLASH_PORT_WIDTH32
@@ -65,7 +65,7 @@
int i;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
switch (i) {
case 0:
flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -85,8 +85,8 @@
/* Protect monitor and environment sectors
*/
flash_protect ( FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
&flash_info[0] );
flash_protect ( FLAG_PROTECT_SET,
@@ -203,10 +203,10 @@
break;
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
@@ -276,7 +276,7 @@
*addr = (FPW) 0x00D000D0; /* erase confirm */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = (FPW) 0x00B000B0; /* suspend erase */
*addr = (FPW) 0x00FF00FF; /* reset to read mode */
@@ -410,7 +410,7 @@
/* wait while polling the status register */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = (FPW) 0x00FF00FF; /* restore read mode */
return (1);
}
diff --git a/board/cerf250/lowlevel_init.S b/board/cerf250/lowlevel_init.S
index ad3c59f..5bfe53c 100644
--- a/board/cerf250/lowlevel_init.S
+++ b/board/cerf250/lowlevel_init.S
@@ -29,7 +29,7 @@
#include <version.h>
#include <asm/arch/pxa-regs.h>
-DRAM_SIZE: .long CFG_DRAM_SIZE
+DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE
/* wait for coprocessor write complete */
.macro CPWAIT reg
@@ -49,67 +49,67 @@
/* Set up GPIO pins first ----------------------------------------- */
ldr r0, =GPSR0
- ldr r1, =CFG_GPSR0_VAL
+ ldr r1, =CONFIG_SYS_GPSR0_VAL
str r1, [r0]
ldr r0, =GPSR1
- ldr r1, =CFG_GPSR1_VAL
+ ldr r1, =CONFIG_SYS_GPSR1_VAL
str r1, [r0]
ldr r0, =GPSR2
- ldr r1, =CFG_GPSR2_VAL
+ ldr r1, =CONFIG_SYS_GPSR2_VAL
str r1, [r0]
ldr r0, =GPCR0
- ldr r1, =CFG_GPCR0_VAL
+ ldr r1, =CONFIG_SYS_GPCR0_VAL
str r1, [r0]
ldr r0, =GPCR1
- ldr r1, =CFG_GPCR1_VAL
+ ldr r1, =CONFIG_SYS_GPCR1_VAL
str r1, [r0]
ldr r0, =GPCR2
- ldr r1, =CFG_GPCR2_VAL
+ ldr r1, =CONFIG_SYS_GPCR2_VAL
str r1, [r0]
ldr r0, =GPDR0
- ldr r1, =CFG_GPDR0_VAL
+ ldr r1, =CONFIG_SYS_GPDR0_VAL
str r1, [r0]
ldr r0, =GPDR1
- ldr r1, =CFG_GPDR1_VAL
+ ldr r1, =CONFIG_SYS_GPDR1_VAL
str r1, [r0]
ldr r0, =GPDR2
- ldr r1, =CFG_GPDR2_VAL
+ ldr r1, =CONFIG_SYS_GPDR2_VAL
str r1, [r0]
ldr r0, =GAFR0_L
- ldr r1, =CFG_GAFR0_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR0_L_VAL
str r1, [r0]
ldr r0, =GAFR0_U
- ldr r1, =CFG_GAFR0_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR0_U_VAL
str r1, [r0]
ldr r0, =GAFR1_L
- ldr r1, =CFG_GAFR1_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR1_L_VAL
str r1, [r0]
ldr r0, =GAFR1_U
- ldr r1, =CFG_GAFR1_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR1_U_VAL
str r1, [r0]
ldr r0, =GAFR2_L
- ldr r1, =CFG_GAFR2_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR2_L_VAL
str r1, [r0]
ldr r0, =GAFR2_U
- ldr r1, =CFG_GAFR2_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR2_U_VAL
str r1, [r0]
ldr r0, =PSSR /* enable GPIO pins */
- ldr r1, =CFG_PSSR_VAL
+ ldr r1, =CONFIG_SYS_PSSR_VAL
str r1, [r0]
/* ---------------------------------------------------------------- */
@@ -147,17 +147,17 @@
/* MSC registers: timing, bus width, mem type */
/* MSC0: nCS(0,1) */
- ldr r2, =CFG_MSC0_VAL
+ ldr r2, =CONFIG_SYS_MSC0_VAL
str r2, [r1, #MSC0_OFFSET]
ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */
/* that data latches */
/* MSC1: nCS(2,3) */
- ldr r2, =CFG_MSC1_VAL
+ ldr r2, =CONFIG_SYS_MSC1_VAL
str r2, [r1, #MSC1_OFFSET]
ldr r2, [r1, #MSC1_OFFSET]
/* MSC2: nCS(4,5) */
- ldr r2, =CFG_MSC2_VAL
+ ldr r2, =CONFIG_SYS_MSC2_VAL
str r2, [r1, #MSC2_OFFSET]
ldr r2, [r1, #MSC2_OFFSET]
@@ -166,37 +166,37 @@
/* ---------------------------------------------------------------- */
/* MECR: Memory Expansion Card Register */
- ldr r2, =CFG_MECR_VAL
+ ldr r2, =CONFIG_SYS_MECR_VAL
str r2, [r1, #MECR_OFFSET]
ldr r2, [r1, #MECR_OFFSET]
/* MCMEM0: Card Interface slot 0 timing */
- ldr r2, =CFG_MCMEM0_VAL
+ ldr r2, =CONFIG_SYS_MCMEM0_VAL
str r2, [r1, #MCMEM0_OFFSET]
ldr r2, [r1, #MCMEM0_OFFSET]
/* MCMEM1: Card Interface slot 1 timing */
- ldr r2, =CFG_MCMEM1_VAL
+ ldr r2, =CONFIG_SYS_MCMEM1_VAL
str r2, [r1, #MCMEM1_OFFSET]
ldr r2, [r1, #MCMEM1_OFFSET]
/* MCATT0: Card Interface Attribute Space Timing, slot 0 */
- ldr r2, =CFG_MCATT0_VAL
+ ldr r2, =CONFIG_SYS_MCATT0_VAL
str r2, [r1, #MCATT0_OFFSET]
ldr r2, [r1, #MCATT0_OFFSET]
/* MCATT1: Card Interface Attribute Space Timing, slot 1 */
- ldr r2, =CFG_MCATT1_VAL
+ ldr r2, =CONFIG_SYS_MCATT1_VAL
str r2, [r1, #MCATT1_OFFSET]
ldr r2, [r1, #MCATT1_OFFSET]
/* MCIO0: Card Interface I/O Space Timing, slot 0 */
- ldr r2, =CFG_MCIO0_VAL
+ ldr r2, =CONFIG_SYS_MCIO0_VAL
str r2, [r1, #MCIO0_OFFSET]
ldr r2, [r1, #MCIO0_OFFSET]
/* MCIO1: Card Interface I/O Space Timing, slot 1 */
- ldr r2, =CFG_MCIO1_VAL
+ ldr r2, =CONFIG_SYS_MCIO1_VAL
str r2, [r1, #MCIO1_OFFSET]
ldr r2, [r1, #MCIO1_OFFSET]
@@ -212,7 +212,7 @@
/* Before accessing MDREFR we need a valid DRI field, so we set */
/* this to power on defaults + DRI field, set SDRAM clocks free running */
- ldr r3, =CFG_MDREFR_VAL
+ ldr r3, =CONFIG_SYS_MDREFR_VAL
ldr r2, =0xFFF
and r3, r3, r2
@@ -243,7 +243,7 @@
/* set MDREFR according to user define with exception of a few bits */
- ldr r4, =CFG_MDREFR_VAL
+ ldr r4, =CONFIG_SYS_MDREFR_VAL
ldr r2, =(MDREFR_K0RUN|MDREFR_K0DB2|MDREFR_K1RUN|MDREFR_K1DB2|\
MDREFR_K2RUN |MDREFR_K2DB2)
and r4, r4, r2
@@ -262,7 +262,7 @@
/* Step 4c: assert MDREFR:E1PIN and E0PIO as desired, set KXFREE */
- ldr r4, =CFG_MDREFR_VAL
+ ldr r4, =CONFIG_SYS_MDREFR_VAL
ldr r2, =(MDREFR_E0PIN|MDREFR_E1PIN|MDREFR_K0FREE| \
MDREFR_K1FREE | MDREFR_K2FREE)
and r4, r4, r2
@@ -274,7 +274,7 @@
/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */
/* configure but not enable each SDRAM partition pair. */
- ldr r4, =CFG_MDCNFG_VAL
+ ldr r4, =CONFIG_SYS_MDCNFG_VAL
bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3)
str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */
@@ -301,7 +301,7 @@
/* documented in SDRAM data sheets. The address(es) used */
/* for this purpose must not be cacheable. */
- ldr r3, =CFG_DRAM_BASE
+ ldr r3, =CONFIG_SYS_DRAM_BASE
.rept 8
str r2, [r3]
.endr
@@ -315,7 +315,7 @@
/* Step 4h: Write MDMRS. */
- ldr r2, =CFG_MDMRS_VAL
+ ldr r2, =CONFIG_SYS_MDMRS_VAL
str r2, [r1, #MDMRS_OFFSET]
diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c
index 86c8e2a..2e66872 100644
--- a/board/cm4008/flash.c
+++ b/board/cm4008/flash.c
@@ -31,7 +31,7 @@
#include <linux/byteorder/swab.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
#define mb() __asm__ __volatile__ ("" : : : "memory")
@@ -51,7 +51,7 @@
int i;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
switch (i) {
case 0:
flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
@@ -71,8 +71,8 @@
/* Protect monitor and environment sectors
*/
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + _bss_start - _armboot_start,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
&flash_info[0]);
return size;
@@ -189,10 +189,10 @@
break;
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = 0xFF; /* restore read mode */
@@ -259,7 +259,7 @@
while (((status = *addr) & 0x80) != 0x80) {
if (get_timer_masked () >
- CFG_FLASH_ERASE_TOUT) {
+ CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = 0xB0; /* suspend erase */
*addr = 0xFF; /* reset to read mode */
@@ -388,7 +388,7 @@
/* wait while polling the status register */
while (((status = *addr) & 0x80) != 0x80) {
- if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = 0xFF; /* restore read mode */
return (1);
}
diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c
index 86c8e2a..2e66872 100644
--- a/board/cm41xx/flash.c
+++ b/board/cm41xx/flash.c
@@ -31,7 +31,7 @@
#include <linux/byteorder/swab.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
#define mb() __asm__ __volatile__ ("" : : : "memory")
@@ -51,7 +51,7 @@
int i;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
switch (i) {
case 0:
flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
@@ -71,8 +71,8 @@
/* Protect monitor and environment sectors
*/
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + _bss_start - _armboot_start,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
&flash_info[0]);
return size;
@@ -189,10 +189,10 @@
break;
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = 0xFF; /* restore read mode */
@@ -259,7 +259,7 @@
while (((status = *addr) & 0x80) != 0x80) {
if (get_timer_masked () >
- CFG_FLASH_ERASE_TOUT) {
+ CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = 0xB0; /* suspend erase */
*addr = 0xFF; /* reset to read mode */
@@ -388,7 +388,7 @@
/* wait while polling the status register */
while (((status = *addr) & 0x80) != 0x80) {
- if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = 0xFF; /* restore read mode */
return (1);
}
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index 24e8db0..9e2f1a5 100644
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -57,7 +57,7 @@
static hw_id_t hw_id;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
/*
* Helper function to initialize SDRAM controller.
*/
@@ -87,7 +87,7 @@
/* normal operation */
*(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | hi_addr_bit;
}
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
/*
@@ -117,7 +117,7 @@
phys_size_t initdram(int board_type)
{
ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
mem_conf_t *mem_conf;
@@ -131,9 +131,9 @@
*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = mem_conf->config2;
sdram_start(0, mem_conf);
- test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
sdram_start(1, mem_conf);
- test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0, mem_conf);
dramsize = test1;
@@ -150,14 +150,14 @@
__builtin_ffs(dramsize >> 20) - 1;
} else
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
/* retrieve size of memory connected to SDRAM CS0 */
dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
if (dramsize >= 0x13)
dramsize = (1 << (dramsize - 0x13)) << 20;
else
dramsize = 0;
-#endif /* !CFG_RAMBOOT */
+#endif /* !CONFIG_SYS_RAMBOOT */
/*
* On MPC5200B we need to set the special configuration delay in the
@@ -178,7 +178,7 @@
{
int i;
for (i = 0; i < HW_ID_ELEM_COUNT; ++i)
- if (i2c_read(CFG_I2C_EEPROM,
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM,
hw_id_format[i].offset,
2,
(uchar *)&hw_id[i][0],
@@ -298,7 +298,7 @@
* also use a little trick to silence I2C-related output.
*/
gd->flags |= GD_FLG_SILENT;
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
gd->flags &= ~GD_FLG_SILENT;
read_hw_id(hw_id_tmp);
@@ -363,7 +363,7 @@
char hostname[MODULE_NAME_MAXLEN];
/* Read ethaddr from EEPROM */
- if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X",
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
/* Check if MAC addr is owned by Schindler */
@@ -377,7 +377,7 @@
}
} else {
printf(LOG_PREFIX "Warning - Unable to read MAC from I2C"
- " device at address %02X:%04X\n", CFG_I2C_EEPROM,
+ " device at address %02X:%04X\n", CONFIG_SYS_I2C_EEPROM,
CONFIG_MAC_OFFSET);
}
#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index 2201bdd..00f0671 100644
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -39,18 +39,18 @@
getc();
temp = 0xf0; /* set io 0-4 as output */
- i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1);
+ i2c_write(CONFIG_SYS_I2C_IO, 3, 1, (uchar *)&temp, 1);
printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
"Press any key to stop\n\n");
while (!tstc()) {
- i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1);
+ i2c_read(CONFIG_SYS_I2C_IO, 0, 1, (uchar *)&temp, 1);
temp1 = (temp >> 4) & 0x03;
temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
temp = temp1;
- i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1);
+ i2c_write(CONFIG_SYS_I2C_IO, 1, 1, (uchar *)&temp, 1);
}
getc();
@@ -392,7 +392,7 @@
error_status = 1;
break;
}
- gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F);
+ gpio->port_config |= (CONFIG_SYS_GPS_PORT_CONFIG & 0xFF0FF80F);
return error_status;
}
diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c
index 8966399..d832e62 100644
--- a/board/cmc_pu2/flash.c
+++ b/board/cmc_pu2/flash.c
@@ -30,10 +30,10 @@
#include <common.h>
#ifndef CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
#endif
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
#define FLASH_CYCLE1 0x0555
#define FLASH_CYCLE2 0x02AA
@@ -54,7 +54,7 @@
unsigned long flash_init (void)
{
unsigned long size = 0;
- ulong flashbase = CFG_FLASH_BASE;
+ ulong flashbase = CONFIG_SYS_FLASH_BASE;
/* Init: no FLASHes known */
memset(&flash_info[0], 0, sizeof(flash_info_t));
@@ -63,12 +63,12 @@
size = flash_info[0].size;
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
- flash_get_info(CFG_MONITOR_BASE));
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+ flash_get_info(CONFIG_SYS_MONITOR_BASE));
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
@@ -104,14 +104,14 @@
flash_info_t * info;
info = NULL;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
info = & flash_info[i];
if (info->size && info->start[0] <= base &&
base <= info->start[0] + info->size - 1)
break;
}
- return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+ return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
}
/*-----------------------------------------------------------------------
@@ -339,7 +339,7 @@
last = 0;
addr = (vu_short *)(info->start[l_sect]);
while ((addr[0] & 0x0080) != 0x0080) {
- if ((now = get_timer_masked ()) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer_masked ()) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -459,7 +459,7 @@
/* data polling for D7 */
while ((*dest & 0x0080) != (data & 0x0080)) {
- if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
*dest = 0x00F0; /* reset bank */
return (1);
}
diff --git a/board/cmi/cmi.c b/board/cmi/cmi.c
index ee243db..b78183e 100644
--- a/board/cmi/cmi.c
+++ b/board/cmi/cmi.c
@@ -70,4 +70,4 @@
/*
* Absolute environment address for linker file.
*/
-GEN_ABS(env_start, CONFIG_ENV_OFFSET + CFG_FLASH_BASE);
+GEN_ABS(env_start, CONFIG_ENV_OFFSET + CONFIG_SYS_FLASH_BASE);
diff --git a/board/cmi/flash.c b/board/cmi/flash.c
index 0d4582b..630c330 100644
--- a/board/cmi/flash.c
+++ b/board/cmi/flash.c
@@ -38,7 +38,7 @@
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
# endif
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
@@ -62,7 +62,7 @@
#define FLASH_CMD_PROTECT_CLEAR 0x00D0
#define FLASH_STATUS_DONE 0x0080
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*
* Local function prototypes
@@ -81,7 +81,7 @@
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -102,11 +102,11 @@
flash_info[0].size = size_b0;
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
@@ -268,10 +268,10 @@
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = FLASH_CMD_RESET; /* restore read mode */
@@ -345,7 +345,7 @@
udelay (1000);
while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) {
- if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Flash erase timeout at address %lx\n", info->start[sect]);
*addr = FLASH_CMD_SUSPEND_ERASE;
*addr = FLASH_CMD_RESET;
@@ -473,7 +473,7 @@
/* wait for error or finish */
while(!(addr[0] & FLASH_STATUS_DONE)){
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
addr[0] = FLASH_CMD_RESET;
return (1);
}
@@ -504,7 +504,7 @@
/* wait for error or finish */
start = get_timer (0);
while(!(addr[0] & FLASH_STATUS_DONE)){
- if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Flash protect timeout at address %lx\n", info->start[sector]);
addr[0] = FLASH_CMD_RESET;
return (1);
diff --git a/board/cobra5272/cobra5272.c b/board/cobra5272/cobra5272.c
index b928550..a62214c 100644
--- a/board/cobra5272/cobra5272.c
+++ b/board/cobra5272/cobra5272.c
@@ -42,7 +42,7 @@
/* Dummy write to start SDRAM */
*((volatile unsigned long *) 0) = 0;
- return CFG_SDRAM_SIZE * 1024 * 1024;
+ return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
};
int testdram (void)
diff --git a/board/cobra5272/flash.c b/board/cobra5272/flash.c
index 82452e2..33c9361 100644
--- a/board/cobra5272/flash.c
+++ b/board/cobra5272/flash.c
@@ -23,10 +23,10 @@
#include <common.h>
-#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
#define FLASH_BANK_SIZE 0x200000
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
void flash_print_info (flash_info_t * info)
{
@@ -74,15 +74,15 @@
int i, j;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_info[i].flash_id =
(AMD_MANUFACT & FLASH_VENDMASK) |
(AMD_ID_PL160CB & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
if (i == 0)
flashbase = PHYS_FLASH_1;
else
@@ -113,8 +113,8 @@
}
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + 0x3ffff, &flash_info[0]);
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + 0x3ffff, &flash_info[0]);
return size;
}
@@ -128,8 +128,8 @@
#define CMD_PROGRAM 0x00A0
#define CMD_UNLOCK_BYPASS 0x0020
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1)))
+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1)))
+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1)))
#define BIT_ERASE_DONE 0x0080
#define BIT_RDY_MASK 0x0080
@@ -211,7 +211,7 @@
result = *addr;
/* check timeout */
- if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
chip1 = TMO;
break;
@@ -299,7 +299,7 @@
result = *addr;
/* check timeout */
- if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
chip1 = ERR | TMO;
break;
}
diff --git a/board/cobra5272/mii.c b/board/cobra5272/mii.c
index b30ba80..161c694 100644
--- a/board/cobra5272/mii.c
+++ b/board/cobra5272/mii.c
@@ -45,7 +45,7 @@
return 0;
}
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
#include <miiphy.h>
/* Make MII read/write commands for the FEC. */
@@ -131,9 +131,9 @@
return (mii_reply & 0xffff); /* data read from phy */
}
-#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
+#endif /* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-#if defined(CFG_DISCOVER_PHY)
+#if defined(CONFIG_SYS_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)
{
#define MAX_PHY_PASSES 11
@@ -198,7 +198,7 @@
return phyaddr;
}
-#endif /* CFG_DISCOVER_PHY */
+#endif /* CONFIG_SYS_DISCOVER_PHY */
void mii_init(void) __attribute__((weak,alias("__mii_init")));
diff --git a/board/cogent/README b/board/cogent/README
index e6eef66..31ca187 100644
--- a/board/cogent/README
+++ b/board/cogent/README
@@ -80,16 +80,16 @@
"include/config_cogent_mpc8xx.h" and reviewing all the options and
settings in there. In particular, check the chip select values
installed into the memory controller's various option and base
-registers - these are set by the defines CFG_CMA_CSn_{BASE,SIZE} and
-CFG_{B,O}Rn_PRELIM. Also be careful of the clock settings installed
-into the SCCR - via the define CFG_SCCR. Finally, decide whether you
+registers - these are set by the defines CONFIG_SYS_CMA_CSn_{BASE,SIZE} and
+CONFIG_SYS_{B,O}Rn_PRELIM. Also be careful of the clock settings installed
+into the SCCR - via the define CONFIG_SYS_SCCR. Finally, decide whether you
want the serial console on motherboard serial port A or on one of the
8xx SMC ports, and set CONFIG_8xx_CONS_{SMC1,SMC2,NONE} accordingly
(NONE means use Cogent motherboard serial port A).
Then edit the file "cogent/config.mk". Firstly, set TEXT_BASE to be
the base address of the EPROM for the CPU module. This should be the
-same as the value selected for CFG_MONITOR_BASE in
+same as the value selected for CONFIG_SYS_MONITOR_BASE in
"include/config_cogent_*.h" (in fact, I have made this automatic via
the -DTEXT_BASE=... option in CPPFLAGS).
diff --git a/board/cogent/flash.c b/board/cogent/flash.c
index 942f33a..e6c85b6 100644
--- a/board/cogent/flash.c
+++ b/board/cogent/flash.c
@@ -24,11 +24,11 @@
#include <common.h>
#include <board/cogent/flash.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
# endif
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
@@ -121,7 +121,7 @@
fip->size += C302F_BNK_SIZE;
osc = fip->sector_count;
fip->sector_count += C302F_BNK_NBLOCKS;
- if ((nsc = fip->sector_count) >= CFG_MAX_FLASH_SECT)
+ if ((nsc = fip->sector_count) >= CONFIG_SYS_MAX_FLASH_SECT)
panic("Too many sectors in flash at address 0x%08lx\n",
(unsigned long)base);
@@ -264,7 +264,7 @@
/* data polling for D7 */
start = get_timer (0);
do {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
retval = 1;
goto done;
}
@@ -295,7 +295,7 @@
flash_info_t *fip;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -303,7 +303,7 @@
total = 0L;
#if defined(CONFIG_CMA302)
- c302f_probe(fip, (c302f_addr_t)CFG_FLASH_BASE);
+ c302f_probe(fip, (c302f_addr_t)CONFIG_SYS_FLASH_BASE);
total += fip->size;
fip++;
#endif
@@ -320,10 +320,10 @@
* protect monitor and environment sectors
*/
-#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
@@ -472,7 +472,7 @@
do {
now = get_timer(start);
- if (now - estart > CFG_FLASH_ERASE_TOUT) {
+ if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout (sect %d)\n", sect);
haderr = 1;
break;
diff --git a/board/cogent/lcd.c b/board/cogent/lcd.c
index 814b4c8..76f5ad1 100644
--- a/board/cogent/lcd.c
+++ b/board/cogent/lcd.c
@@ -197,7 +197,7 @@
lcd_printf(const char *fmt, ...)
{
va_list args;
- char buf[CFG_PBSIZE];
+ char buf[CONFIG_SYS_PBSIZE];
va_start(args, fmt);
(void)vsprintf(buf, fmt, args);
@@ -234,7 +234,7 @@
void board_show_activity (ulong timestamp)
{
#ifdef CONFIG_STATUS_LED
- if ((timestamp % (CFG_HZ / 2) == 0)
+ if ((timestamp % (CONFIG_SYS_HZ / 2) == 0)
lcd_heartbeat ();
#endif
}
diff --git a/board/cogent/mb.h b/board/cogent/mb.h
index f6eaf0a..b3aba48 100644
--- a/board/cogent/mb.h
+++ b/board/cogent/mb.h
@@ -69,51 +69,51 @@
* 0xA000000-0xDFFFFFF.
*/
-#define CMA_MB_RAM_BASE (CFG_CMA_MB_BASE+0x0000000)
+#define CMA_MB_RAM_BASE (CONFIG_SYS_CMA_MB_BASE+0x0000000)
#define CMA_MB_RAM_SIZE 0x2000000 /* dip sws set actual size */
#if (CMA_MB_CAPS & CMA_MB_CAP_SLOT1)
-#define CMA_MB_SLOT1_BASE (CFG_CMA_MB_BASE+0x2000000)
+#define CMA_MB_SLOT1_BASE (CONFIG_SYS_CMA_MB_BASE+0x2000000)
#define CMA_MB_SLOT1_SIZE 0x2000000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_SLOT2)
-#define CMA_MB_SLOT2_BASE (CFG_CMA_MB_BASE+0x4000000)
+#define CMA_MB_SLOT2_BASE (CONFIG_SYS_CMA_MB_BASE+0x4000000)
#define CMA_MB_SLOT2_SIZE 0x2000000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_PCI)
-#define CMA_MB_STDPCI_BASE (CFG_CMA_MB_BASE+0x4000000)
+#define CMA_MB_STDPCI_BASE (CONFIG_SYS_CMA_MB_BASE+0x4000000)
#define CMA_MB_STDPCI_SIZE 0x1ff0000
-#define CMA_MB_V360EPC_BASE (CFG_CMA_MB_BASE+0x5ff0000)
+#define CMA_MB_V360EPC_BASE (CONFIG_SYS_CMA_MB_BASE+0x5ff0000)
#define CMA_MB_V360EPC_SIZE 0x10000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_SLOT3)
-#define CMA_MB_SLOT3_BASE (CFG_CMA_MB_BASE+0x6000000)
+#define CMA_MB_SLOT3_BASE (CONFIG_SYS_CMA_MB_BASE+0x6000000)
#define CMA_MB_SLOT3_SIZE 0x2000000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_PCI_EXT)
-#define CMA_MB_EXTPCI_BASE (CFG_CMA_MB_BASE+0xa000000)
+#define CMA_MB_EXTPCI_BASE (CONFIG_SYS_CMA_MB_BASE+0xa000000)
#define CMA_MB_EXTPCI_SIZE 0x4000000
#endif
-#define CMA_MB_ROMLOW_BASE (CFG_CMA_MB_BASE+0xe000000)
+#define CMA_MB_ROMLOW_BASE (CONFIG_SYS_CMA_MB_BASE+0xe000000)
#define CMA_MB_ROMLOW_SIZE 0x800000
#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
-#define CMA_MB_FLLOW_EXEC_BASE (CFG_CMA_MB_BASE+0xe000000)
+#define CMA_MB_FLLOW_EXEC_BASE (CONFIG_SYS_CMA_MB_BASE+0xe000000)
#define CMA_MB_FLLOW_EXEC_SIZE 0x100000
-#define CMA_MB_FLLOW_RDWR_BASE (CFG_CMA_MB_BASE+0xe400000)
+#define CMA_MB_FLLOW_RDWR_BASE (CONFIG_SYS_CMA_MB_BASE+0xe400000)
#define CMA_MB_FLLOW_RDWR_SIZE 0x400000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_RTC)
-#define CMA_MB_RTC_BASE (CFG_CMA_MB_BASE+0xe800000)
+#define CMA_MB_RTC_BASE (CONFIG_SYS_CMA_MB_BASE+0xe800000)
#define CMA_MB_RTC_SIZE 0x4000
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR)
-#define CMA_MB_SERPAR_BASE (CFG_CMA_MB_BASE+0xe900000)
+#define CMA_MB_SERPAR_BASE (CONFIG_SYS_CMA_MB_BASE+0xe900000)
#define CMA_MB_SERIALB_BASE (CMA_MB_SERPAR_BASE+0x00)
#define CMA_MB_SERIALA_BASE (CMA_MB_SERPAR_BASE+0x40)
#define CMA_MB_PARALLEL_BASE (CMA_MB_SERPAR_BASE+0x80)
@@ -121,20 +121,20 @@
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_KBM)
-#define CMA_MB_PKBM_BASE (CFG_CMA_MB_BASE+0xe900100)
+#define CMA_MB_PKBM_BASE (CONFIG_SYS_CMA_MB_BASE+0xe900100)
#define CMA_MB_PKBM_SIZE 0x10
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_LCD)
-#define CMA_MB_LCD_BASE (CFG_CMA_MB_BASE+0xeb00000)
+#define CMA_MB_LCD_BASE (CONFIG_SYS_CMA_MB_BASE+0xeb00000)
#define CMA_MB_LCD_SIZE 0x10
#endif
-#define CMA_MB_DIPSW_BASE (CFG_CMA_MB_BASE+0xec00000)
+#define CMA_MB_DIPSW_BASE (CONFIG_SYS_CMA_MB_BASE+0xec00000)
#define CMA_MB_DIPSW_SIZE 0x10
#if (CMA_MB_CAPS & (CMA_MB_CAP_SLOT1|CMA_MB_CAP_SER2|CMA_MB_CAP_KBM))
-#define CMA_MB_SLOT1CFG_BASE (CFG_CMA_MB_BASE+0xf100000)
+#define CMA_MB_SLOT1CFG_BASE (CONFIG_SYS_CMA_MB_BASE+0xf100000)
#if (CMA_MB_CAPS & CMA_MB_CAP_SER2)
#define CMA_MB_SER2_BASE (CMA_MB_SLOT1CFG_BASE+0x80)
#define CMA_MB_SER2B_BASE (CMA_MB_SER2_BASE+0x00)
@@ -152,7 +152,7 @@
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_SLOT2)
-#define CMA_MB_SLOT2CFG_BASE (CFG_CMA_MB_BASE+0xf200000)
+#define CMA_MB_SLOT2CFG_BASE (CONFIG_SYS_CMA_MB_BASE+0xf200000)
#if defined(CONFIG_CMA302) && defined(CONFIG_CMA302_SLOT2)
#define CMA_MB_S2KBM_BASE (CMA_MB_SLOT2CFG_BASE+0x200)
#endif
@@ -160,7 +160,7 @@
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_PCI)
-#define CMA_MB_PCICTL_BASE (CFG_CMA_MB_BASE+0xf200000)
+#define CMA_MB_PCICTL_BASE (CONFIG_SYS_CMA_MB_BASE+0xf200000)
#define CMA_MB_PCI_V3CTL_BASE (CMA_MB_PCICTL_BASE+0x100)
#define CMA_MB_PCI_IDSEL_BASE (CMA_MB_PCICTL_BASE+0x200)
#define CMA_MB_PCI_IMASK_BASE (CMA_MB_PCICTL_BASE+0x300)
@@ -171,19 +171,19 @@
#endif
#if (CMA_MB_CAPS & CMA_MB_CAP_SLOT3)
-#define CMA_MB_SLOT3CFG_BASE (CFG_CMA_MB_BASE+0xf300000)
+#define CMA_MB_SLOT3CFG_BASE (CONFIG_SYS_CMA_MB_BASE+0xf300000)
#if defined(CONFIG_CMA302) && defined(CONFIG_CMA302_SLOT3)
#define CMA_MB_S3KBM_BASE (CMA_MB_SLOT3CFG_BASE+0x200)
#endif
#define CMA_MB_SLOT3CFG_SIZE 0x400
#endif
-#define CMA_MB_ROMHIGH_BASE (CFG_CMA_MB_BASE+0xf800000)
+#define CMA_MB_ROMHIGH_BASE (CONFIG_SYS_CMA_MB_BASE+0xf800000)
#define CMA_MB_ROMHIGH_SIZE 0x800000
#if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
-#define CMA_MB_FLHIGH_EXEC_BASE (CFG_CMA_MB_BASE+0xf800000)
+#define CMA_MB_FLHIGH_EXEC_BASE (CONFIG_SYS_CMA_MB_BASE+0xf800000)
#define CMA_MB_FLHIGH_EXEC_SIZE 0x100000
-#define CMA_MB_FLHIGH_RDWR_BASE (CFG_CMA_MB_BASE+0xfc00000)
+#define CMA_MB_FLHIGH_RDWR_BASE (CONFIG_SYS_CMA_MB_BASE+0xfc00000)
#define CMA_MB_FLHIGH_RDWR_SIZE 0x400000
#endif
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
index 16ead75..1178822 100644
--- a/board/cpc45/cpc45.c
+++ b/board/cpc45/cpc45.c
@@ -72,7 +72,7 @@
uint8_t mber = 0;
unsigned int tmp;
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
if (i2c_reg_read (0x50, 2) != 0x04)
return 0; /* Memory type */
@@ -89,7 +89,7 @@
CONFIG_READ_WORD(MCCR2, mccr2);
mccr2 &= 0xffff0000;
- start = CFG_SDRAM_BASE;
+ start = CONFIG_SYS_SDRAM_BASE;
end = start + (1 << (col + row + 3) ) * bank - 1;
for (i = 0; i < m; i++) {
@@ -243,8 +243,8 @@
#if defined(CONFIG_CMD_PCMCIA)
-#ifdef CFG_PCMCIA_MEM_ADDR
-volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#ifdef CONFIG_SYS_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CONFIG_SYS_PCMCIA_MEM_ADDR;
#endif
int pcmcia_init(void)
diff --git a/board/cpc45/flash.c b/board/cpc45/flash.c
index 3826a54..8fe7584 100644
--- a/board/cpc45/flash.c
+++ b/board/cpc45/flash.c
@@ -27,7 +27,7 @@
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
# endif
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
@@ -41,7 +41,7 @@
#define MAIN_SECT_SIZE 0x40000
#define PARAM_SECT_SIZE 0x8000
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
static int write_data (flash_info_t * info, ulong dest, ulong * data);
static void write_via_fpu (vu_long * addr, ulong * data);
@@ -81,8 +81,8 @@
__asm__ volatile ("sync\n eieio");
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
- vu_long *addr = (vu_long *) (CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
+ vu_long *addr = (vu_long *) (CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE);
addr[0] = 0x00900090;
@@ -124,17 +124,17 @@
addr[0] = 0xFFFFFFFF;
flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
for (j = 0; j < flash_info[i].sector_count; j++) {
if (j > 30) {
- flash_info[i].start[j] = CFG_FLASH_BASE +
+ flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE +
i * FLASH_BANK_SIZE +
(MAIN_SECT_SIZE * 31) + (j -
31) *
PARAM_SECT_SIZE;
} else {
- flash_info[i].start[j] = CFG_FLASH_BASE +
+ flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE +
i * FLASH_BANK_SIZE +
j * MAIN_SECT_SIZE;
}
@@ -162,20 +162,20 @@
/* Protect monitor and environment sectors
*/
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[1]);
#else
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[0]);
#endif
#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-#if CONFIG_ENV_ADDR >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+#if CONFIG_ENV_ADDR >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[1]);
@@ -309,7 +309,7 @@
while (((addr[0] & 0x00800080) != 0x00800080) ||
((addr[1] & 0x00800080) != 0x00800080)) {
if ((now = get_timer (start)) >
- CFG_FLASH_ERASE_TOUT) {
+ CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
addr[0] = 0x00B000B0; /* suspend erase */
addr[0] = 0x00FF00FF; /* to read mode */
@@ -486,7 +486,7 @@
while (((addr[0] & 0x00800080) != 0x00800080) ||
((addr[1] & 0x00800080) != 0x00800080)) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
addr[0] = 0x00FF00FF; /* restore read mode */
return (1);
}
diff --git a/board/cpc45/pd67290.c b/board/cpc45/pd67290.c
index d8f4be5..12c9c74 100644
--- a/board/cpc45/pd67290.c
+++ b/board/cpc45/pd67290.c
@@ -699,16 +699,16 @@
mem.map = 0;
mem.flags = MAP_ATTRIB | MAP_ACTIVE;
mem.speed = 300;
- mem.sys_start = CFG_PCMCIA_MEM_ADDR;
- mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+ mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
+ mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
mem.card_start = 0;
i365_set_mem_map (&socket, &mem);
mem.map = 1;
mem.flags = MAP_ACTIVE;
mem.speed = 300;
- mem.sys_start = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE;
- mem.sys_stop = CFG_PCMCIA_MEM_ADDR + (2 * CFG_PCMCIA_MEM_SIZE) - 1;
+ mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE;
+ mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + (2 * CONFIG_SYS_PCMCIA_MEM_SIZE) - 1;
mem.card_start = 0;
i365_set_mem_map (&socket, &mem);
@@ -794,8 +794,8 @@
{
u_int tmp[2];
u_int *mem = (void *) socket.cb_phys;
- u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
- u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+ u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
+ u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
pci_read_config_dword (dev, 0x00, tmp + 0);
pci_read_config_dword (dev, 0x80, tmp + 1);
diff --git a/board/cpu86/config.mk b/board/cpu86/config.mk
index 00354c4..5fe0ca0 100644
--- a/board/cpu86/config.mk
+++ b/board/cpu86/config.mk
@@ -25,7 +25,7 @@
# CPU86 boards
#
-# This should be equal to the CFG_FLASH_BASE define in config_CPU86.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_CPU86.h
# for the "final" configuration, with U-Boot in flash, or the address
# in RAM where U-Boot is loaded at for debugging.
#
diff --git a/board/cpu86/cpu86.c b/board/cpu86/cpu86.c
index 23ec283..bc7ebfe 100644
--- a/board/cpu86/cpu86.c
+++ b/board/cpu86/cpu86.c
@@ -225,7 +225,7 @@
*/
maxsize = (1 + (~orx | 0x7fff)) / 2;
- /* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+ /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
* we are configuring CS1 if base != 0
*/
sdmr_ptr = &memctl->memc_psdmr;
@@ -250,7 +250,7 @@
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -261,7 +261,7 @@
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
- *(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */
+ *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
@@ -275,37 +275,37 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong size8, size9;
#endif
long psize;
psize = 32 * 1024 * 1024;
- memctl->memc_mptpr = CFG_MPTPR;
- memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+ memctl->memc_psrt = CONFIG_SYS_PSRT;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
- size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
- (uchar *) CFG_SDRAM_BASE);
- size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
- (uchar *) CFG_SDRAM_BASE);
+ size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
+ size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
if (size8 < size9) {
psize = size9;
printf ("(60x:9COL) ");
} else {
- psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
- (uchar *) CFG_SDRAM_BASE);
+ psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
printf ("(60x:8COL) ");
}
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
icache_enable ();
@@ -315,6 +315,6 @@
#if defined(CONFIG_CMD_DOC)
void doc_init (void)
{
- doc_probe (CFG_DOC_BASE);
+ doc_probe (CONFIG_SYS_DOC_BASE);
}
#endif
diff --git a/board/cpu86/cpu86.h b/board/cpu86/cpu86.h
index cf7852c..ca0c39f 100644
--- a/board/cpu86/cpu86.h
+++ b/board/cpu86/cpu86.h
@@ -6,19 +6,19 @@
#define REG8(x) (*(volatile unsigned char *)(x))
/* CPU86 register definitions */
-#define CPU86_VME_EAC REG8(CFG_BCRS_BASE + 0x00)
-#define CPU86_VME_SAC REG8(CFG_BCRS_BASE + 0x01)
-#define CPU86_VME_MAC REG8(CFG_BCRS_BASE + 0x02)
-#define CPU86_BCR REG8(CFG_BCRS_BASE + 0x03)
-#define CPU86_BSR REG8(CFG_BCRS_BASE + 0x04)
-#define CPU86_WDOG_RPORT REG8(CFG_BCRS_BASE + 0x05)
-#define CPU86_MBOX_IRQ REG8(CFG_BCRS_BASE + 0x04)
-#define CPU86_REV REG8(CFG_BCRS_BASE + 0x07)
-#define CPU86_VME_IRQMASK REG8(CFG_BCRS_BASE + 0x80)
-#define CPU86_VME_IRQSTATUS REG8(CFG_BCRS_BASE + 0x81)
-#define CPU86_LOCAL_IRQMASK REG8(CFG_BCRS_BASE + 0x82)
-#define CPU86_LOCAL_IRQSTATUS REG8(CFG_BCRS_BASE + 0x83)
-#define CPU86_PMCL_IRQSTATUS REG8(CFG_BCRS_BASE + 0x84)
+#define CPU86_VME_EAC REG8(CONFIG_SYS_BCRS_BASE + 0x00)
+#define CPU86_VME_SAC REG8(CONFIG_SYS_BCRS_BASE + 0x01)
+#define CPU86_VME_MAC REG8(CONFIG_SYS_BCRS_BASE + 0x02)
+#define CPU86_BCR REG8(CONFIG_SYS_BCRS_BASE + 0x03)
+#define CPU86_BSR REG8(CONFIG_SYS_BCRS_BASE + 0x04)
+#define CPU86_WDOG_RPORT REG8(CONFIG_SYS_BCRS_BASE + 0x05)
+#define CPU86_MBOX_IRQ REG8(CONFIG_SYS_BCRS_BASE + 0x04)
+#define CPU86_REV REG8(CONFIG_SYS_BCRS_BASE + 0x07)
+#define CPU86_VME_IRQMASK REG8(CONFIG_SYS_BCRS_BASE + 0x80)
+#define CPU86_VME_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x81)
+#define CPU86_LOCAL_IRQMASK REG8(CONFIG_SYS_BCRS_BASE + 0x82)
+#define CPU86_LOCAL_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x83)
+#define CPU86_PMCL_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x84)
/* Board Control Register bits */
#define CPU86_BCR_FWPT 0x01
diff --git a/board/cpu86/flash.c b/board/cpu86/flash.c
index 845a3b2..8135780 100644
--- a/board/cpu86/flash.c
+++ b/board/cpu86/flash.c
@@ -28,7 +28,7 @@
#include <mpc8xx.h>
#include "cpu86.h"
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*-----------------------------------------------------------------------
*/
@@ -177,7 +177,7 @@
/* Init: no FLASHes known
*/
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -186,8 +186,8 @@
/* Static FLASH Bank configuration here (only one bank) */
- size_b0 = flash_int_get_size ((ulong *) CFG_FLASH_BASE, &flash_info[0]);
- size_b1 = flash_amd_get_size ((uchar *) CFG_BOOTROM_BASE, &flash_info[1]);
+ size_b0 = flash_int_get_size ((ulong *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+ size_b1 = flash_amd_get_size ((uchar *) CONFIG_SYS_BOOTROM_BASE, &flash_info[1]);
if (size_b0 > 0 || size_b1 > 0) {
@@ -210,22 +210,22 @@
/* protect monitor and environment sectors
*/
-#if CFG_MONITOR_BASE >= CFG_BOOTROM_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_BOOTROM_BASE
if (size_b1) {
- /* If U-Boot is booted from ROM the CFG_MONITOR_BASE > CFG_FLASH_BASE
+ /* If U-Boot is booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH_BASE
* but we shouldn't protect it.
*/
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1]
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1]
);
}
#else
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
);
#endif
#endif
@@ -234,7 +234,7 @@
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
# endif
-# if CONFIG_ENV_ADDR >= CFG_BOOTROM_BASE
+# if CONFIG_ENV_ADDR >= CONFIG_SYS_BOOTROM_BASE
if (size_b1) {
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
@@ -382,7 +382,7 @@
last = start;
addr = (vu_char *)(info->start[l_sect]);
while ((addr[0] & 0x80) != 0x80) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -434,7 +434,7 @@
last = start;
while ((addr[0] & 0x00800080) != 0x00800080 ||
(addr[1] & 0x00800080) != 0x00800080) {
- if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout (erase suspended!)\n");
/* Suspend erase
*/
@@ -549,7 +549,7 @@
start = get_timer (0);
while ((*addr & 0x00800080) != 0x00800080) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
/* Suspend program
*/
*addr = 0x00B000B0;
@@ -604,7 +604,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/cpu87/config.mk b/board/cpu87/config.mk
index 6384c78..6a694a4 100644
--- a/board/cpu87/config.mk
+++ b/board/cpu87/config.mk
@@ -25,7 +25,7 @@
# CPU87 board
#
-# This should be equal to the CFG_FLASH_BASE define in configs/cpu87.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in configs/cpu87.h
# for the "final" configuration, with U-Boot in flash, or the address
# in RAM where U-Boot is loaded at for debugging.
#
diff --git a/board/cpu87/cpu87.c b/board/cpu87/cpu87.c
index c7a96f9..057a34c 100644
--- a/board/cpu87/cpu87.c
+++ b/board/cpu87/cpu87.c
@@ -227,7 +227,7 @@
*/
maxsize = (1 + (~orx | 0x7fff)) / 2;
- /* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+ /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
* we are configuring CS1 if base != 0
*/
sdmr_ptr = &memctl->memc_psdmr;
@@ -252,7 +252,7 @@
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -263,7 +263,7 @@
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
- *(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */
+ *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
@@ -277,45 +277,45 @@
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong size8, size9, size10;
#endif
long psize;
psize = 32 * 1024 * 1024;
- memctl->memc_mptpr = CFG_MPTPR;
- memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+ memctl->memc_psrt = CONFIG_SYS_PSRT;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
- size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
- (uchar *) CFG_SDRAM_BASE);
+ size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
- size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
- (uchar *) CFG_SDRAM_BASE);
+ size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
- size10 = try_init (memctl, CFG_PSDMR_10COL, CFG_OR2_10COL,
- (uchar *) CFG_SDRAM_BASE);
+ size10 = try_init (memctl, CONFIG_SYS_PSDMR_10COL, CONFIG_SYS_OR2_10COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
psize = max(size8,max(size9,size10));
if (psize == size8) {
- psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
- (uchar *) CFG_SDRAM_BASE);
+ psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
printf ("(60x:8COL) ");
} else if (psize == size9){
- psize = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
- (uchar *) CFG_SDRAM_BASE);
+ psize = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
printf ("(60x:9COL) ");
} else
printf ("(60x:10COL) ");
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
icache_enable ();
@@ -325,7 +325,7 @@
#if defined(CONFIG_CMD_DOC)
void doc_init (void)
{
- doc_probe (CFG_DOC_BASE);
+ doc_probe (CONFIG_SYS_DOC_BASE);
}
#endif
diff --git a/board/cpu87/cpu87.h b/board/cpu87/cpu87.h
index 5dbd4ae..45cb853 100644
--- a/board/cpu87/cpu87.h
+++ b/board/cpu87/cpu87.h
@@ -6,19 +6,19 @@
#define REG8(x) (*(volatile unsigned char *)(x))
/* CPU86 register definitions */
-#define CPU86_VME_EAC REG8(CFG_BCRS_BASE + 0x00)
-#define CPU86_VME_SAC REG8(CFG_BCRS_BASE + 0x01)
-#define CPU86_VME_MAC REG8(CFG_BCRS_BASE + 0x02)
-#define CPU86_BCR REG8(CFG_BCRS_BASE + 0x03)
-#define CPU86_BSR REG8(CFG_BCRS_BASE + 0x04)
-#define CPU86_WDOG_RPORT REG8(CFG_BCRS_BASE + 0x05)
-#define CPU86_MBOX_IRQ REG8(CFG_BCRS_BASE + 0x04)
-#define CPU86_REV REG8(CFG_BCRS_BASE + 0x07)
-#define CPU86_VME_IRQMASK REG8(CFG_BCRS_BASE + 0x80)
-#define CPU86_VME_IRQSTATUS REG8(CFG_BCRS_BASE + 0x81)
-#define CPU86_LOCAL_IRQMASK REG8(CFG_BCRS_BASE + 0x82)
-#define CPU86_LOCAL_IRQSTATUS REG8(CFG_BCRS_BASE + 0x83)
-#define CPU86_PMCL_IRQSTATUS REG8(CFG_BCRS_BASE + 0x84)
+#define CPU86_VME_EAC REG8(CONFIG_SYS_BCRS_BASE + 0x00)
+#define CPU86_VME_SAC REG8(CONFIG_SYS_BCRS_BASE + 0x01)
+#define CPU86_VME_MAC REG8(CONFIG_SYS_BCRS_BASE + 0x02)
+#define CPU86_BCR REG8(CONFIG_SYS_BCRS_BASE + 0x03)
+#define CPU86_BSR REG8(CONFIG_SYS_BCRS_BASE + 0x04)
+#define CPU86_WDOG_RPORT REG8(CONFIG_SYS_BCRS_BASE + 0x05)
+#define CPU86_MBOX_IRQ REG8(CONFIG_SYS_BCRS_BASE + 0x04)
+#define CPU86_REV REG8(CONFIG_SYS_BCRS_BASE + 0x07)
+#define CPU86_VME_IRQMASK REG8(CONFIG_SYS_BCRS_BASE + 0x80)
+#define CPU86_VME_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x81)
+#define CPU86_LOCAL_IRQMASK REG8(CONFIG_SYS_BCRS_BASE + 0x82)
+#define CPU86_LOCAL_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x83)
+#define CPU86_PMCL_IRQSTATUS REG8(CONFIG_SYS_BCRS_BASE + 0x84)
/* Board Control Register bits */
#define CPU86_BCR_FWPT 0x01
diff --git a/board/cpu87/flash.c b/board/cpu87/flash.c
index f7e121f..c35757b 100644
--- a/board/cpu87/flash.c
+++ b/board/cpu87/flash.c
@@ -28,7 +28,7 @@
#include <mpc8xx.h>
#include "cpu87.h"
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*-----------------------------------------------------------------------
*/
@@ -183,7 +183,7 @@
/* Init: no FLASHes known
*/
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -192,8 +192,8 @@
/* Static FLASH Bank configuration here (only one bank) */
- size_b0 = flash_int_get_size ((ulong *) CFG_FLASH_BASE, &flash_info[0]);
- size_b1 = flash_amd_get_size ((uchar *) CFG_BOOTROM_BASE, &flash_info[1]);
+ size_b0 = flash_int_get_size ((ulong *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+ size_b1 = flash_amd_get_size ((uchar *) CONFIG_SYS_BOOTROM_BASE, &flash_info[1]);
if (size_b0 > 0 || size_b1 > 0) {
@@ -216,22 +216,22 @@
/* protect monitor and environment sectors
*/
-#if CFG_MONITOR_BASE >= CFG_BOOTROM_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_BOOTROM_BASE
if (size_b1) {
- /* If U-Boot is booted from ROM the CFG_MONITOR_BASE > CFG_FLASH_BASE
+ /* If U-Boot is booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH_BASE
* but we shouldn't protect it.
*/
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1]
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1]
);
}
#else
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
);
#endif
#endif
@@ -240,7 +240,7 @@
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
# endif
-# if CONFIG_ENV_ADDR >= CFG_BOOTROM_BASE
+# if CONFIG_ENV_ADDR >= CONFIG_SYS_BOOTROM_BASE
if (size_b1) {
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
@@ -391,7 +391,7 @@
last = start;
addr = (vu_char *)(info->start[l_sect]);
while ((addr[0] & 0x80) != 0x80) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return 1;
}
@@ -443,7 +443,7 @@
last = start;
while ((addr[0] & 0x00800080) != 0x00800080 ||
(addr[1] & 0x00800080) != 0x00800080) {
- if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout (erase suspended!)\n");
/* Suspend erase
*/
@@ -558,7 +558,7 @@
start = get_timer (0);
while ((*addr & 0x00800080) != 0x00800080) {
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
/* Suspend program
*/
*addr = 0x00B000B0;
@@ -613,7 +613,7 @@
/* data polling for D7 */
start = get_timer (0);
while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
diff --git a/board/cradle/flash.c b/board/cradle/flash.c
index 4783d92..b5635fb 100644
--- a/board/cradle/flash.c
+++ b/board/cradle/flash.c
@@ -30,7 +30,7 @@
#define FLASH_BANK_SIZE 0x400000
#define MAIN_SECT_SIZE 0x20000
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*-----------------------------------------------------------------------
@@ -41,15 +41,15 @@
int i, j;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_info[i].flash_id =
(INTEL_MANUFACT & FLASH_VENDMASK) |
(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
switch (i) {
case 0:
flashbase = PHYS_FLASH_1;
@@ -71,8 +71,8 @@
/* Protect monitor and environment sectors
*/
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
&flash_info[0]);
flash_protect (FLAG_PROTECT_SET,
@@ -88,7 +88,7 @@
{
int i, j;
- for (j = 0; j < CFG_MAX_FLASH_BANKS; j++) {
+ for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; j++) {
switch (info->flash_id & FLASH_VENDMASK) {
case (INTEL_MANUFACT & FLASH_VENDMASK):
printf ("Intel: ");
@@ -183,7 +183,7 @@
while ((*addr & 0x80) != 0x80) {
if (get_timer_masked () >
- CFG_FLASH_ERASE_TOUT) {
+ CONFIG_SYS_FLASH_ERASE_TOUT) {
*addr = 0xB0; /* suspend erase */