#
# (C) Copyright 2003
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
# File: drivers/sk98lin/Makefile
#
# Makefile for the SysKonnect SK-98xx device driver.
#

LIB := libsk98lin.a

OBJS :=     skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
             ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
             skxmac2.o skcsum.o #skproc.o

OBJS +=     uboot_skb.o uboot_drv.o

# DBGDEF =  \
# -DDEBUG

ifdef DEBUG
DBGDEF +=  \
-DSK_DEBUG_CHKMOD=0x00000000L \
-DSK_DEBUG_CHKCAT=0x00000000L
endif


# **** possible debug modules for SK_DEBUG_CHKMOD *****************
# SK_DBGMOD_MERR        0x00000001L     /* general module error indication */
# SK_DBGMOD_HWM         0x00000002L     /* Hardware init module */
# SK_DBGMOD_RLMT        0x00000004L     /* RLMT module */
# SK_DBGMOD_VPD         0x00000008L     /* VPD module */
# SK_DBGMOD_I2C         0x00000010L     /* I2C module */
# SK_DBGMOD_PNMI        0x00000020L     /* PNMI module */
# SK_DBGMOD_CSUM        0x00000040L     /* CSUM module */
# SK_DBGMOD_ADDR        0x00000080L     /* ADDR module */
# SK_DBGMOD_DRV         0x00010000L     /* DRV module */

# **** possible debug categories for SK_DEBUG_CHKCAT **************
# *** common modules ***
# SK_DBGCAT_INIT        0x00000001L     module/driver initialization
# SK_DBGCAT_CTRL        0x00000002L     controlling: add/rmv MCA/MAC and other controls (IOCTL)
# SK_DBGCAT_ERR         0x00000004L     error handling paths
# SK_DBGCAT_TX          0x00000008L     transmit path
# SK_DBGCAT_RX          0x00000010L     receive path
# SK_DBGCAT_IRQ         0x00000020L     general IRQ handling
# SK_DBGCAT_QUEUE       0x00000040L     any queue management
# SK_DBGCAT_DUMP        0x00000080L     large data output e.g. hex dump
# SK_DBGCAT_FATAL       0x00000100L     large data output e.g. hex dump

# *** driver (file skge.c) ***
# SK_DBGCAT_DRV_ENTRY           0x00010000      entry points
# SK_DBGCAT_DRV_???             0x00020000      not used
# SK_DBGCAT_DRV_MCA             0x00040000      multicast
# SK_DBGCAT_DRV_TX_PROGRESS     0x00080000      tx path
# SK_DBGCAT_DRV_RX_PROGRESS     0x00100000      rx path
# SK_DBGCAT_DRV_PROGRESS        0x00200000      general runtime
# SK_DBGCAT_DRV_???             0x00400000      not used
# SK_DBGCAT_DRV_PROM            0x00800000      promiscuous mode
# SK_DBGCAT_DRV_TX_FRAME        0x01000000      display tx frames
# SK_DBGCAT_DRV_ERROR           0x02000000      error conditions
# SK_DBGCAT_DRV_INT_SRC         0x04000000      interrupts sources
# SK_DBGCAT_DRV_EVENT           0x08000000      driver events

EXTRA_CFLAGS += -I. -DSK_USE_CSUM $(DBGDEF)

CFLAGS += $(EXTRA_CFLAGS)


all:	$(LIB)

$(LIB):	$(OBJS)
	$(AR) crv $@ $(OBJS)

#########################################################################

.depend:	Makefile $(OBJS:.o=.c)
		$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@

sinclude .depend

#########################################################################