// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (C) 2018-2021 Marvell International Ltd.
 */

#undef CP110_NAME
#undef CP110_NUM
#undef CP110_PCIE_MEM_SIZE
#undef CP110_PCIEx_CPU_MEM_BASE
#undef CP110_PCIEx_BUS_MEM_BASE

/* CP110-1 Settings */
#define CP110_NAME			cp1
#define CP110_NUM			1
#define CP110_PCIE_MEM_SIZE(iface)	(0xf00000)
#define CP110_PCIEx_CPU_MEM_BASE(iface)	(0xe2000000 + (iface) * 0x1000000)
#define CP110_PCIEx_BUS_MEM_BASE(iface)	(CP110_PCIEx_CPU_MEM_BASE(iface))

#include "armada-cp110.dtsi"

/ {
	model = "Marvell CN9131 development board";
	compatible = "marvell,cn9131-db";

	aliases {
		gpio3 = &cp1_gpio0;
		gpio4 = &cp1_gpio1;
	};

	cp1 {
		config-space {
			cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
				compatible = "regulator-fixed";
				pinctrl-names = "default";
				pinctrl-0 = <&cp1_xhci0_vbus_pins>;
				regulator-name = "cp1-xhci0-vbus";
				regulator-min-microvolt = <5000000>;
				regulator-max-microvolt = <5000000>;
				startup-delay-us = <100000>;
				regulator-force-boot-off;
				gpio = <&cp1_gpio0 3 GPIO_ACTIVE_HIGH>;
			};
			cp1_reg_usb3_current_lim0: cp1_usb3_current_limiter@0 {
				compatible = "regulator-fixed";
				regulator-min-microamp = <900000>;
				regulator-max-microamp = <900000>;
				regulator-force-boot-off;
				gpio = <&cp1_gpio0 2 GPIO_ACTIVE_HIGH>;
			};
			cp1_pcie_reset_pins: cp1-pcie-reset-pins {
				marvell,pins = <0>;
				marvell,function = <0>;
			};
		};
	};
};

&cp1_i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&cp1_i2c0_pins>;
	status = "okay";
	clock-frequency = <100000>;
};

/* CON40 */
&cp1_pcie0 {
	pinctrl-names = "default";
	pinctrl-0 = <&cp1_pcie_reset_pins>;
	marvell,reset-gpio = <&cp1_gpio0 0 GPIO_ACTIVE_LOW>;
	status = "okay";
	num-lanes = <2>;
		/* non-prefetchable memory */
	ranges = <0x82000000 0 0xe2000000 0 0xe2000000 0 0xf00000>;
};

&cp1_pinctl {
	compatible = "marvell,mvebu-pinctrl",
		     "marvell,cp115-standalone-pinctrl";
	bank-name ="cp1-110";

	/* MPP Bus:
	 *	[0-12]	GPIO
	 *	[13-16]	SPI1
	 *	[17-27]	GPIO (Default)
	 *	[28]	SATA1_PRESENT_ACTIVEn
	 *	[29-34]	GPIO (Default)
	 *	[35-36]	xSMI
	 *	[37-38] I2C0
	 *	[39-62]	GPIO
	 */
		/*   0    1    2    3    4    5    6    7    8    9 */
	pin-func = < 0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
		     0x0  0x0  0x0  0x3  0x3  0x3  0x3  0x0  0x0  0x0
		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x9  0x0
		     0x0  0x0  0x0  0x0  0x0  0x7  0x7  0x2  0x2  0x0
		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
		     0x0  0x0  0x0 >;

	cp1_i2c0_pins: cp1-i2c-pins-0 {
		marvell,pins = < 37 38 >;
		marvell,function = <2>;
	};
	cp1_spi0_pins: cp1-spi-pins-0 {
		marvell,pins = < 13 14 15 16 >;
		marvell,function = <3>;
	};
	cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
		marvell,pins = <3>;
		marvell,function = <0>;
	};
};

/* CON32 */
&cp1_sata0 {
	status = "okay";
};

/* U24 */
&cp1_spi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&cp1_spi0_pins>;
	reg = <0x700680 0x50>,		/* control */
	      <0x2000000 0x1000000>,	/* CS0 */
	      <0 0xffffffff>,		/* CS1 */
	      <0 0xffffffff>,		/* CS2 */
	      <0 0xffffffff>;		/* CS3 */
	status = "okay";

	spi-flash@0 {
		#address-cells = <0x1>;
		#size-cells = <0x1>;
		compatible = "jedec,spi-nor", "spi-flash";
		reg = <0x0>;
		/* On-board MUX does not allow higher frequencies */
		spi-max-frequency = <40000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "U-Boot";
				reg = <0x0 0x200000>;
			};

			partition@400000 {
				label = "Filesystem";
				reg = <0x200000 0xe00000>;
			};
		};
	};
};

/* CON58 */
&cp1_usb3_1 {
	vbus-supply = <&cp1_reg_usb3_vbus0>;
	current-limiter = <&cp1_reg_usb3_current_lim0>;
	vbus-disable-delay = <500>;
	status = "okay";
};

&cp1_utmi1 {
	status = "okay";
};