menu "MediaTek MIPS platforms"
	depends on ARCH_MTMIPS

config SYS_MALLOC_F_LEN
	default 0x1000

config SYS_SOC
	default "mt7628" if SOC_MT7628

choice
	prompt "MediaTek MIPS SoC select"

config SOC_MT7628
	bool "MT7628"
	select MIPS_L1_CACHE_SHIFT_5
	select PINCTRL_MT7628
	select MTK_SERIAL
	help
	  This supports MediaTek MT7628/MT7688.

endchoice

choice
	prompt "Board select"

config BOARD_GARDENA_SMART_GATEWAY_MT7688
	bool "GARDENA smart Gateway"
	depends on SOC_MT7628
	select BOARD_LATE_INIT
	select SUPPORTS_BOOT_RAM
	help
	  GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
	  and 8 MiB of flash (SPI NOR) and additional SPI NAND storage.

config BOARD_LINKIT_SMART_7688
	bool "LinkIt Smart 7688"
	depends on SOC_MT7628
	select SUPPORTS_BOOT_RAM
	help
	  Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM
	  and 32 MiB of flash (SPI).
	  Between its different peripherals there's an integrated switch with 4
	  ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
	  a MT7688 (PCIe).

endchoice

choice
	prompt "Boot mode"

config BOOT_RAM
	bool "RAM boot"
	depends on SUPPORTS_BOOT_RAM
	help
	  This builds an image that is linked to a RAM address. It can be used
	  for booting from CFE via TFTP using an ELF image, but it can also be
	  booted from RAM by other bootloaders using a BIN image.

config BOOT_ROM
	bool "ROM boot"
	depends on SUPPORTS_BOOT_RAM
	help
	  This builds an image that is linked to a ROM address. It can be
	  used as main bootloader image which is programmed onto the onboard
	  flash storage (SPI NOR).

endchoice

choice
	prompt "DDR2 size"

config ONBOARD_DDR2_SIZE_256MBIT
	bool "256MBit (32MByte) total size"
	depends on BOOT_ROM
	help
	  Use 256MBit (32MByte) of DDR total size

config ONBOARD_DDR2_SIZE_512MBIT
	bool "512MBit (64MByte) total size"
	depends on BOOT_ROM
	help
	  Use 512MBit (64MByte) of DDR total size

config ONBOARD_DDR2_SIZE_1024MBIT
	bool "1024MBit (128MByte) total size"
	depends on BOOT_ROM
	help
	  Use 1024MBit (128MByte) of DDR total size

config ONBOARD_DDR2_SIZE_2048MBIT
	bool "2048MBit (256MByte) total size"
	depends on BOOT_ROM
	help
	  Use 2048MBit (256MByte) of DDR total size

endchoice

choice
	prompt "DDR2 chip width"

config ONBOARD_DDR2_CHIP_WIDTH_8BIT
	bool "8bit DDR chip width"
	depends on BOOT_ROM
	help
	  Use DDR chips with 8bit width

config ONBOARD_DDR2_CHIP_WIDTH_16BIT
	bool "16bit DDR chip width"
	depends on BOOT_ROM
	help
	  Use DDR chips with 16bit width

endchoice

choice
	prompt "DDR2 bus width"

config ONBOARD_DDR2_BUS_WIDTH_16BIT
	bool "16bit DDR bus width"
	depends on BOOT_ROM
	help
	  Use 16bit DDR bus width

config ONBOARD_DDR2_BUS_WIDTH_32BIT
	bool "32bit DDR bus width"
	depends on BOOT_ROM
	help
	  Use 32bit DDR bus width

endchoice

config SUPPORTS_BOOT_RAM
	bool

source "board/gardena/smart-gateway-mt7688/Kconfig"
source "board/seeed/linkit-smart-7688/Kconfig"

endmenu