U-Boot for Freescale i.MX31

This file contains information for the port of U-Boot to the Freescale
i.MX31 SoC.

1. CONFIGURATION OPTIONS/SETTINGS
---------------------------------

1.1 Configuration of MC13783 SPI bus
------------------------------------
The power management companion chip MC13783 is connected to the
i.MX31 via an SPI bus. Use the following configuration options
to setup the bus and chip select used for a particular board.

CONFIG_MC13783_SPI_BUS	-- defines the SPI bus the MC13783 is connected to.
			   Note that 0 is CSPI1, 1 is CSPI2 and 2 is CSPI3.
CONFIG_MC13783_SPI_CS	-- define the chip select the MC13783 s connected to.