/*
 * mcfuart.h -- ColdFire internal UART support defines.
 *
 * File copied from mcfuart.h of uCLinux distribution:
 *      (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
 *      (C) Copyright 2000, Lineo Inc. (www.lineo.com)
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/****************************************************************************/
#ifndef	mcfuart_h
#define	mcfuart_h
/****************************************************************************/

#include <linux/config.h>

/*
 *	Define the base address of the UARTS within the MBAR address
 *	space.
 */
#if defined(CONFIG_M5272)
#define	MCFUART_BASE1		0x100	/* Base address of UART1 */
#define	MCFUART_BASE2		0x140	/* Base address of UART2 */
#elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#if defined(CONFIG_NETtel)
#define	MCFUART_BASE1		0x180	/* Base address of UART1 */
#define	MCFUART_BASE2		0x140	/* Base address of UART2 */
#else
#define	MCFUART_BASE1		0x140	/* Base address of UART1 */
#define	MCFUART_BASE2		0x180	/* Base address of UART2 */
#endif
#elif defined(CONFIG_M5282) || defined(CONFIG_M5271)
#define MCFUART_BASE1		0x200	/* Base address of UART1 */
#define MCFUART_BASE2		0x240	/* Base address of UART2 */
#define MCFUART_BASE3		0x280	/* Base address of UART3 */
#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
#if defined(CONFIG_NETtel) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3)
#define MCFUART_BASE1		0x200	/* Base address of UART1 */
#define MCFUART_BASE2		0x1c0	/* Base address of UART2 */
#else
#define MCFUART_BASE1		0x1c0	/* Base address of UART1 */
#define MCFUART_BASE2		0x200	/* Base address of UART2 */
#endif
#endif

/*
 *	Define the ColdFire UART register set addresses.
 */
#define	MCFUART_UMR		0x00	/* Mode register (r/w) */
#define	MCFUART_USR		0x04	/* Status register (r) */
#define	MCFUART_UCSR		0x04	/* Clock Select (w) */
#define	MCFUART_UCR		0x08	/* Command register (w) */
#define	MCFUART_URB		0x0c	/* Receiver Buffer (r) */
#define	MCFUART_UTB		0x0c	/* Transmit Buffer (w) */
#define	MCFUART_UIPCR		0x10	/* Input Port Change (r) */
#define	MCFUART_UACR		0x10	/* Auxiliary Control (w) */
#define	MCFUART_UISR		0x14	/* Interrup Status (r) */
#define	MCFUART_UIMR		0x14	/* Interrupt Mask (w) */
#define	MCFUART_UBG1		0x18	/* Baud Rate MSB (r/w) */
#define	MCFUART_UBG2		0x1c	/* Baud Rate LSB (r/w) */
#ifdef	CONFIG_M5272
#define	MCFUART_UTF		0x28	/* Transmitter FIFO (r/w) */
#define	MCFUART_URF		0x2c	/* Receiver FIFO (r/w) */
#define	MCFUART_UFPD		0x30	/* Frac Prec. Divider (r/w) */
#else
#define	MCFUART_UIVR		0x30	/* Interrupt Vector (r/w) */
#endif
#define	MCFUART_UIPR		0x34	/* Input Port (r) */
#define	MCFUART_UOP1		0x38	/* Output Port Bit Set (w) */
#define	MCFUART_UOP0		0x3c	/* Output Port Bit Reset (w) */

#ifdef	CONFIG_M5249
/* Note: This isn't in the 5249 docs */
#define	MCFUART_UFPD		0x30	/* Frac Prec. Divider (r/w) */
#endif

/*
 *	Define bit flags in Mode Register 1 (MR1).
 */
#define	MCFUART_MR1_RXRTS	0x80	/* Auto RTS flow control */
#define	MCFUART_MR1_RXIRQFULL	0x40	/* RX IRQ type FULL */
#define	MCFUART_MR1_RXIRQRDY	0x00	/* RX IRQ type RDY */
#define	MCFUART_MR1_RXERRBLOCK	0x20	/* RX block error mode */
#define	MCFUART_MR1_RXERRCHAR	0x00	/* RX char error mode */

#define	MCFUART_MR1_PARITYNONE	0x10	/* No parity */
#define	MCFUART_MR1_PARITYEVEN	0x00	/* Even parity */
#define	MCFUART_MR1_PARITYODD	0x04	/* Odd parity */
#define	MCFUART_MR1_PARITYSPACE	0x08	/* Space parity */
#define	MCFUART_MR1_PARITYMARK	0x0c	/* Mark parity */

#define	MCFUART_MR1_CS5		0x00	/* 5 bits per char */
#define	MCFUART_MR1_CS6		0x01	/* 6 bits per char */
#define	MCFUART_MR1_CS7		0x02	/* 7 bits per char */
#define	MCFUART_MR1_CS8		0x03	/* 8 bits per char */

/*
 *	Define bit flags in Mode Register 2 (MR2).
 */
#define	MCFUART_MR2_LOOPBACK	0x80	/* Loopback mode */
#define	MCFUART_MR2_REMOTELOOP	0xc0	/* Remote loopback mode */
#define	MCFUART_MR2_AUTOECHO	0x40	/* Automatic echo */
#define	MCFUART_MR2_TXRTS	0x20	/* Assert RTS on TX */
#define	MCFUART_MR2_TXCTS	0x10	/* Auto CTS flow control */

#define	MCFUART_MR2_STOP1	0x07	/* 1 stop bit */
#define	MCFUART_MR2_STOP15	0x08	/* 1.5 stop bits */
#define	MCFUART_MR2_STOP2	0x0f	/* 2 stop bits */

/*
 *	Define bit flags in Status Register (USR).
 */
#define	MCFUART_USR_RXBREAK	0x80	/* Received BREAK */
#define	MCFUART_USR_RXFRAMING	0x40	/* Received framing error */
#define	MCFUART_USR_RXPARITY	0x20	/* Received parity error */
#define	MCFUART_USR_RXOVERRUN	0x10	/* Received overrun error */
#define	MCFUART_USR_TXEMPTY	0x08	/* Transmitter empty */
#define	MCFUART_USR_TXREADY	0x04	/* Transmitter ready */
#define	MCFUART_USR_RXFULL	0x02	/* Receiver full */
#define	MCFUART_USR_RXREADY	0x01	/* Receiver ready */

#define	MCFUART_USR_RXERR	(MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
				MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)

/*
 *	Define bit flags in Clock Select Register (UCSR).
 */
#define	MCFUART_UCSR_RXCLKTIMER	0xd0	/* RX clock is timer */
#define	MCFUART_UCSR_RXCLKEXT16	0xe0	/* RX clock is external x16 */
#define	MCFUART_UCSR_RXCLKEXT1	0xf0	/* RX clock is external x1 */

#define	MCFUART_UCSR_TXCLKTIMER	0x0d	/* TX clock is timer */
#define	MCFUART_UCSR_TXCLKEXT16	0x0e	/* TX clock is external x16 */
#define	MCFUART_UCSR_TXCLKEXT1	0x0f	/* TX clock is external x1 */

/*
 *	Define bit flags in Command Register (UCR).
 */
#define	MCFUART_UCR_CMDNULL		0x00	/* No command */
#define	MCFUART_UCR_CMDRESETMRPTR	0x10	/* Reset MR pointer */
#define	MCFUART_UCR_CMDRESETRX		0x20	/* Reset receiver */
#define	MCFUART_UCR_CMDRESETTX		0x30	/* Reset transmitter */
#define	MCFUART_UCR_CMDRESETERR		0x40	/* Reset error status */
#define	MCFUART_UCR_CMDRESETBREAK	0x50	/* Reset BREAK change */
#define	MCFUART_UCR_CMDBREAKSTART	0x60	/* Start BREAK */
#define	MCFUART_UCR_CMDBREAKSTOP	0x70	/* Stop BREAK */

#define	MCFUART_UCR_TXNULL	0x00	/* No TX command */
#define	MCFUART_UCR_TXENABLE	0x04	/* Enable TX */
#define	MCFUART_UCR_TXDISABLE	0x08	/* Disable TX */
#define	MCFUART_UCR_RXNULL	0x00	/* No RX command */
#define	MCFUART_UCR_RXENABLE	0x01	/* Enable RX */
#define	MCFUART_UCR_RXDISABLE	0x02	/* Disable RX */

/*
 *	Define bit flags in Input Port Change Register (UIPCR).
 */
#define	MCFUART_UIPCR_CTSCOS	0x10	/* CTS change of state */
#define	MCFUART_UIPCR_CTS	0x01	/* CTS value */

/*
 *	Define bit flags in Input Port Register (UIP).
 */
#define	MCFUART_UIPR_CTS	0x01	/* CTS value */

/*
 *	Define bit flags in Output Port Registers (UOP).
 *	Clear bit by writing to UOP0, set by writing to UOP1.
 */
#define	MCFUART_UOP_RTS		0x01	/* RTS set or clear */

/*
 *	Define bit flags in the Auxiliary Control Register (UACR).
 */
#define	MCFUART_UACR_IEC	0x01	/* Input enable control */

/*
 *	Define bit flags in Interrupt Status Register (UISR).
 *	These same bits are used for the Interrupt Mask Register (UIMR).
 */
#define	MCFUART_UIR_COS		0x80	/* Change of state (CTS) */
#define	MCFUART_UIR_DELTABREAK	0x04	/* Break start or stop */
#define	MCFUART_UIR_RXREADY	0x02	/* Receiver ready */
#define	MCFUART_UIR_TXREADY	0x01	/* Transmitter ready */

#ifdef	CONFIG_M5272
/*
 *	Define bit flags in the Transmitter FIFO Register (UTF).
 */
#define	MCFUART_UTF_TXB		0x1f	/* transmitter data level */
#define	MCFUART_UTF_FULL	0x20	/* transmitter fifo full */
#define	MCFUART_UTF_TXS		0xc0	/* transmitter status */

/*
 *	Define bit flags in the Receiver FIFO Register (URF).
 */
#define	MCFUART_URF_RXB		0x1f	/* receiver data level */
#define	MCFUART_URF_FULL	0x20	/* receiver fifo full */
#define	MCFUART_URF_RXS		0xc0	/* receiver status */
#endif