// SPDX-License-Identifier: BSD-2-Clause-Patent
//
// Copyright (c) 2021, Linaro Limited. All rights reserved.
//

/ {
	aliases {
		spi_nor = &spi_nor;
		i2c0 = &i2c0;
	};

	spi_nor: spi@54800000 {
		compatible = "socionext,synquacer-spi";
		reg = <0x00 0x54800000 0x00 0x1000>;
		interrupts = <0x00 0x9c 0x04 0x00 0x9d 0x04 0x00 0x9e 0x04>;
		clocks = <&clk_alw_1_8>;
		clock-names = "iHCLK";
		socionext,use-rtm;
		socionext,set-aces;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "okay";
		active_clk_edges;
		chipselect_num = <1>;

		spi-flash@0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "jedec,spi-nor";
			reg = <0>; /* Chip select 0 */
			spi-max-frequency = <31250000>;
			spi-rx-bus-width = <0x1>;
			spi-tx-bus-width = <0x1>;

			partitions {
				compatible = "fixed-partitions";
				#address-cells = <1>;
				#size-cells = <1>;

				partition@0 {
					label = "BootStrap-BL1";
					reg = <0x0 0x70000>;
					read-only;
				};

				partition@70000 {
					label = "Flash-Writer";
					reg = <0x70000 0x90000>;
					read-only;
				};

				partition@100000 {
					label = "SCP-BL2";
					reg = <0x100000 0x80000>;
					read-only;
				};

				partition@180000 {
					label = "FIP-TFA";
					reg = <0x180000 0x78000>;
				};

				partition@1f8000 {
					label = "Stage2Tables";
					reg = <0x1f8000 0x8000>;
				};

				partition@200000 {
					label = "U-Boot";
					reg = <0x200000 0x100000>;
				};

				partition@300000 {
					label = "UBoot-Env";
					reg = <0x300000 0x100000>;
				};

				partition@500000 {
					label = "Ex-OPTEE";
					reg = <0x500000 0x200000>;
				};
			};
		};
	};

	i2c0: i2c@51200000 {
		compatible = "socionext,synquacer-i2c";
		reg = <0x0 0x51200000 0x0 0x1000>;
		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clk_i2c>;
		clock-names = "pclk";
		clock-frequency = <400000>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "okay";

		pcf8563: rtc@51 {
			compatible = "nxp,pcf8563";
			reg = <0x51>;
		};
	};

	firmware {
		optee {
			status = "okay";
		};
	};
};

&smmu {
	status = "okay";
};

&pcie0 {
	status = "okay";
};

&pcie1 {
	status = "okay";
};

&sdhci {
	status = "okay";
};