// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
 * Copyright 2021 NXP
 */

/dts-v1/;

#include "imx8ulp.dtsi"

/ {
	model = "FSL i.MX8ULP EVK";
	compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";

	chosen {
		stdout-path = &lpuart5;
		bootargs = "console=ttyLP1,115200 earlycon";
	};

	usdhc2_pwrseq: usdhc2_pwrseq {
		compatible = "mmc-pwrseq-simple";
		reset-gpios = <&pcal6408 2 GPIO_ACTIVE_LOW>;
	};
};

&lpuart5 {
	/* console */
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&pinctrl_lpuart5>;
	pinctrl-1 = <&pinctrl_lpuart5>;
	status = "okay";
};

&iomuxc1 {
	pinctrl_lpuart5: lpuart5grp {
		fsl,pins = <
			MX8ULP_PAD_PTF14__LPUART5_TX	0x03
			MX8ULP_PAD_PTF15__LPUART5_RX	0x03
		>;
	};

	pinctrl_lpi2c7: lpi2c7grp {
		fsl,pins = <
			MX8ULP_PAD_PTE12__LPI2C7_SCL	0x27
			MX8ULP_PAD_PTE13__LPI2C7_SDA	0x27
		>;
	};

	pinctrl_usdhc0: usdhc0grp {
		fsl,pins = <
			MX8ULP_PAD_PTD0__SDHC0_RESET_B  0x43
			MX8ULP_PAD_PTD1__SDHC0_CMD	0x43
			MX8ULP_PAD_PTD2__SDHC0_CLK	0x10042
			MX8ULP_PAD_PTD10__SDHC0_D0	0x43
			MX8ULP_PAD_PTD9__SDHC0_D1	0x43
			MX8ULP_PAD_PTD8__SDHC0_D2	0x43
			MX8ULP_PAD_PTD7__SDHC0_D3	0x43
			MX8ULP_PAD_PTD6__SDHC0_D4	0x43
			MX8ULP_PAD_PTD5__SDHC0_D5	0x43
			MX8ULP_PAD_PTD4__SDHC0_D6	0x43
			MX8ULP_PAD_PTD3__SDHC0_D7	0x43
			MX8ULP_PAD_PTD11__SDHC0_DQS	0x10042
		>;
	};

	pinctrl_usdhc2_pte: usdhc2ptegrp {
		fsl,pins = <
			MX8ULP_PAD_PTE1__SDHC2_D0	0x43
			MX8ULP_PAD_PTE0__SDHC2_D1	0x43
			MX8ULP_PAD_PTE5__SDHC2_D2	0x43
			MX8ULP_PAD_PTE4__SDHC2_D3	0x43
			MX8ULP_PAD_PTE2__SDHC2_CLK	0x10042
			MX8ULP_PAD_PTE3__SDHC2_CMD	0x43
			MX8ULP_PAD_PTE7__PTE7		0x10003
		>;
	};

	pinctrl_fec: fecgrp {
		fsl,pins = <
			MX8ULP_PAD_PTE14__ENET0_MDIO		0x43
			MX8ULP_PAD_PTE15__ENET0_MDC	0x43
			MX8ULP_PAD_PTE18__ENET0_CRS_DV	0x43
			MX8ULP_PAD_PTE17__ENET0_RXER	0x43
			MX8ULP_PAD_PTF1__ENET0_RXD0	0x43
			MX8ULP_PAD_PTE20__ENET0_RXD1	0x43
			MX8ULP_PAD_PTE16__ENET0_TXEN	0x43
			MX8ULP_PAD_PTE23__ENET0_TXD0	0x43
			MX8ULP_PAD_PTE22__ENET0_TXD1	0x43
			MX8ULP_PAD_PTE19__ENET0_REFCLK	0x10043
			MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x10043
		>;
	};

	pinctrl_usbotg0_id: otg0idgrp {
		fsl,pins = <
			MX8ULP_PAD_PTF2__USB0_ID	0x10003
		>;
	};

	pinctrl_usbotg1_id: otg1idgrp {
		fsl,pins = <
			MX8ULP_PAD_PTD23__USB1_ID	0x10003
		>;
	};
};

&usdhc0 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc0>;
	pinctrl-1 = <&pinctrl_usdhc0>;
	pinctrl-2 = <&pinctrl_usdhc0>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
	pinctrl-0 = <&pinctrl_usdhc2_pte>;
	pinctrl-1 = <&pinctrl_usdhc2_pte>;
	pinctrl-2 = <&pinctrl_usdhc2_pte>;
	pinctrl-3 = <&pinctrl_usdhc2_pte>;
	mmc-pwrseq = <&usdhc2_pwrseq>;
	max-frequency = <100000000>;
	bus-width = <4>;
	keep-power-in-suspend;
	non-removable;
	wakeup-source;
	status = "okay";

	wifi_wake_host {
		compatible = "nxp,wifi-wake-host";
		interrupt-parent = <&gpioe>;
		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
		interrupt-names = "host-wake";
	};
};

&lpi2c7 {
	#address-cells = <1>;
	#size-cells = <0>;
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpi2c7>;
	status = "okay";

	pcal6408: gpio@21 {
		compatible = "ti,tca6408";
		reg = <0x21>;
		gpio-controller;
		#gpio-cells = <2>;
	};
};

&flexspi0 {
	status = "okay";

	flash0: atxp032@0 {
		reg = <0>;
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <66000000>;
	};
};

&flexspi2 {
	status = "okay";

	flash1: mt35xu512aba@0 {
		reg = <0>;
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <29000000>;
		spi-nor,ddr-quad-read-dummy = <8>;
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec>;
	phy-mode = "rmii";
	phy-handle = <&ethphy>;
	status = "okay";

	phy-reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy: ethernet-phy@1 {
			reg = <1>;
			micrel,led-mode = <1>;
		};
	};
};

&usbotg0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg0_id>;
	srp-disable;
	hnp-disable;
	adp-disable;
	status = "okay";
};

&usbphy0 {
	fsl,tx-d-cal = <88>;
};

&usbotg1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg1_id>;
	srp-disable;
	hnp-disable;
	adp-disable;
	status = "okay";
};

&usbphy1 {
	fsl,tx-d-cal = <88>;
};