Convert CONFIG_SYS_FSL_SEC_MON et al to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_FSL_SEC_MON
CONFIG_SYS_FSL_SEC_MON_BE
CONFIG_SYS_FSL_SEC_MON_LE
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/Kconfig.nxp b/arch/Kconfig.nxp
index 4d04c03..72cac0f 100644
--- a/arch/Kconfig.nxp
+++ b/arch/Kconfig.nxp
@@ -4,6 +4,7 @@
imply CMD_HASH if ARM
select FSL_CAAM
select ARCH_MISC_INIT
+ select FSL_SEC_MON
select SPL_BOARD_INIT if (ARM && SPL)
select SPL_HASH if (ARM && SPL)
select SHA_HW_ACCEL
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 709c293..fd41d30 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -60,9 +60,6 @@
#define CONFIG_SYS_FSL_SFP_LE
#define CONFIG_SYS_FSL_SRK_LE
-/* Security Monitor */
-#define CONFIG_SYS_FSL_SEC_MON_LE
-
/* DCFG - GUR */
#define CONFIG_SYS_FSL_CCSR_GUR_LE
@@ -162,9 +159,6 @@
#define CONFIG_SYS_FSL_SFP_LE
#define CONFIG_SYS_FSL_SRK_LE
-/* Security Monitor */
-#define CONFIG_SYS_FSL_SEC_MON_LE
-
/* DCFG - GUR */
#define CONFIG_SYS_FSL_CCSR_GUR_LE
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
@@ -214,9 +208,6 @@
#define CONFIG_SYS_FSL_SFP_LE
#define CONFIG_SYS_FSL_SRK_LE
-/* Security Monitor */
-#define CONFIG_SYS_FSL_SEC_MON_LE
-
/* DCFG - GUR */
#define CONFIG_SYS_FSL_CCSR_GUR_LE
@@ -273,9 +264,6 @@
/* SEC */
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
-/* Security Monitor */
-#define CONFIG_SYS_FSL_SEC_MON_LE
-
/* DCFG - GUR */
#define CONFIG_SYS_FSL_CCSR_GUR_LE
@@ -310,7 +298,6 @@
#define CONFIG_SYS_FSL_IFC_BE
#define CONFIG_SYS_FSL_SFP_VER_3_2
-#define CONFIG_SYS_FSL_SEC_MON_BE
#define CONFIG_SYS_FSL_SFP_BE
#define CONFIG_SYS_FSL_SRK_LE
#define CONFIG_KEY_REVOCATION
@@ -350,7 +337,6 @@
#define GICD_BASE 0x01401000
#define GICC_BASE 0x01402000
#define CONFIG_SYS_FSL_SFP_VER_3_2
-#define CONFIG_SYS_FSL_SEC_MON_BE
#define CONFIG_SYS_FSL_SFP_BE
#define CONFIG_SYS_FSL_SRK_LE
#define CONFIG_KEY_REVOCATION
@@ -369,7 +355,6 @@
#define CONFIG_SYS_FSL_IFC_BE
#define CONFIG_SYS_FSL_SFP_VER_3_2
-#define CONFIG_SYS_FSL_SEC_MON_BE
#define CONFIG_SYS_FSL_SFP_BE
#define CONFIG_SYS_FSL_SRK_LE
#define CONFIG_KEY_REVOCATION
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index aa790ab..06ead24 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -87,7 +87,6 @@
#define CONFIG_SYS_FSL_ESDHC_BE
#define CONFIG_SYS_FSL_WDOG_BE
#define CONFIG_SYS_FSL_DSPI_BE
-#define CONFIG_SYS_FSL_SEC_MON_LE
#define CONFIG_SYS_FSL_SFP_VER_3_2
#define CONFIG_SYS_FSL_SFP_BE
#define CONFIG_SYS_FSL_SRK_LE
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index 154663e..d6a7c3d 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -8,8 +8,6 @@
#define __FSL_SECURE_BOOT_H
#ifdef CONFIG_CHAIN_OF_TRUST
-#define CONFIG_FSL_SEC_MON
-
#ifdef CONFIG_SPL_BUILD
/*
* Define the key hash for U-Boot here if public/private key pair used to
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 225befb..47b4625 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -19,7 +19,6 @@
/* IP endianness */
#define CONFIG_SYS_FSL_IFC_BE
#define CONFIG_SYS_FSL_SFP_BE
-#define CONFIG_SYS_FSL_SEC_MON_BE
#if defined(CONFIG_ARCH_MPC8548)
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index 3a1d858..e073025 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -92,8 +92,6 @@
#define CONFIG_SPL_UBOOT_KEY_HASH NULL
#endif /* ifdef CONFIG_SPL_BUILD */
-#define CONFIG_FSL_SEC_MON
-
#ifndef CONFIG_SPL_BUILD
/*
* fsl_setenv_chain_of_trust() must be called from
diff --git a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
index 7c69d56..5121819 100644
--- a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
@@ -47,6 +47,7 @@
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
index 21c989c..155c474 100644
--- a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
@@ -45,6 +45,7 @@
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
index a77e124..b97cbaf 100644
--- a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
@@ -52,6 +52,7 @@
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
index 02d6e0f..a39cb99 100644
--- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
@@ -50,6 +50,7 @@
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
index 6dc5674..bcd9d73 100644
--- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
@@ -48,6 +48,7 @@
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
index 9035594..6abb1ba 100644
--- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
@@ -64,6 +64,7 @@
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_EARLY_INIT=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index aeebd38..3bbe46d 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -50,6 +50,7 @@
CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x53
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index 401bc39..51436de 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -73,6 +73,7 @@
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x53
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index 9d29c36..1f7128e 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -73,6 +73,7 @@
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x53
# CONFIG_SPL_DM_MMC is not set
CONFIG_FSL_ESDHC=y
diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
index e92c099..6911b00 100644
--- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
@@ -49,6 +49,7 @@
CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x53
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
index 0044442..8cb86e1 100644
--- a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
@@ -45,6 +45,7 @@
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x52
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig
index 8b17130..d428472 100644
--- a/configs/ls1046aqds_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_SECURE_BOOT_defconfig
@@ -64,6 +64,7 @@
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
index 58bc95d..295cc66 100644
--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
@@ -64,6 +64,7 @@
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_EARLY_INIT=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index 2a7c730..3b87078 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -57,6 +57,7 @@
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x53
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 4301d38..149d155 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -80,6 +80,7 @@
CONFIG_DM_I2C=y
# CONFIG_SPL_DM_I2C is not set
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x53
# CONFIG_SPL_DM_MMC is not set
CONFIG_FSL_ESDHC=y
diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
index 62020ee..827db18 100644
--- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@@ -51,6 +51,7 @@
CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x53
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 28d5da4..92264e5 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -275,6 +275,20 @@
Security Monitor can be transitioned on any security failures,
like software violations or hardware security violations.
+choice
+ prompt "Security monitor interaction endianess"
+ depends on FSL_SEC_MON
+ default SYS_FSL_SEC_MON_BE if PPC
+ default SYS_FSL_SEC_MON_LE
+
+config SYS_FSL_SEC_MON_LE
+ bool "Security monitor interactions are little endian"
+
+config SYS_FSL_SEC_MON_BE
+ bool "Security monitor interactions are big endian"
+
+endchoice
+
config IRQ
bool "Interrupt controller"
help
diff --git a/include/fsl_sec_mon.h b/include/fsl_sec_mon.h
index fb838db..3092a0e 100644
--- a/include/fsl_sec_mon.h
+++ b/include/fsl_sec_mon.h
@@ -23,8 +23,6 @@
#define sec_mon_in16(a) in_be16(a)
#define sec_mon_clrbits32 clrbits_be32
#define sec_mon_setbits32 setbits_be32
-#else
-#error Neither CONFIG_SYS_FSL_SEC_MON_LE nor CONFIG_SYS_FSL_SEC_MON_BE defined
#endif
struct ccsr_sec_mon_regs {