diff --git a/README b/README
index 3870b0d..a0d9cb4 100644
--- a/README
+++ b/README
@@ -733,11 +733,9 @@
 			Default is 32bit.
 
 - SCSI Support:
-		CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and
-		CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID *
-		CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the
-		maximum numbers of LUNs, SCSI ID's and target
-		devices.
+		CONFIG_SYS_SCSI_MAX_LUN [8] and CONFIG_SYS_SCSI_MAX_SCSI_ID [7]
+		can be adjusted to define the maximum numbers of LUNs and SCSI
+		IDs.
 
 		The environment variable 'scsidevs' is set to the number of
 		SCSI devices found during the last scan.
diff --git a/api/api_storage.c b/api/api_storage.c
index a0dacad..adca44b 100644
--- a/api/api_storage.c
+++ b/api/api_storage.c
@@ -9,6 +9,7 @@
 #include <common.h>
 #include <api_public.h>
 #include <part.h>
+#include <scsi.h>
 
 #if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
 #include <usb.h>
@@ -71,7 +72,7 @@
 	specs[ENUM_SATA].name = "sata";
 #endif
 #if defined(CONFIG_SCSI)
-	specs[ENUM_SCSI].max_dev = CONFIG_SYS_SCSI_MAX_DEVICE;
+	specs[ENUM_SCSI].max_dev = SCSI_MAX_DEVICE;
 	specs[ENUM_SCSI].enum_started = 0;
 	specs[ENUM_SCSI].enum_ended = 0;
 	specs[ENUM_SCSI].type = DEV_TYP_STOR | DT_STOR_SCSI;
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 0e1f9e0..489286e 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -81,8 +81,6 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 #ifdef CONFIG_DDR_SPD
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE		((phys_size_t)2 << 30)
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index d93d241..d7b3301 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -46,7 +46,7 @@
 
 static int scsi_curr_dev; /* current device */
 
-static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
+static struct blk_desc scsi_dev_desc[SCSI_MAX_DEVICE];
 #endif
 
 /* almost the maximum amount of the scsi_ext command.. */
@@ -655,7 +655,7 @@
 
 	if (verbose)
 		printf("scanning bus for devices...\n");
-	for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++)
+	for (i = 0; i < SCSI_MAX_DEVICE; i++)
 		scsi_init_dev_desc(&scsi_dev_desc[i], i);
 
 	scsi_max_devs = 0;
@@ -703,7 +703,7 @@
 U_BOOT_LEGACY_BLK(scsi) = {
 	.if_typename	= "scsi",
 	.if_type	= IF_TYPE_SCSI,
-	.max_devs	= CONFIG_SYS_SCSI_MAX_DEVICE,
+	.max_devs	= SCSI_MAX_DEVICE,
 	.desc		= scsi_dev_desc,
 };
 #endif
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 9568444..e4e3872 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -52,8 +52,6 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 
 /*
  * Default to using SPI for environment, etc.
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index c9af5a4..d5eacf1 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -40,8 +40,6 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
 /* Keep device tree and initrd in lower memory so the kernel can access them */
diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h
index ff385d9..2c27a00 100644
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@@ -24,8 +24,6 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
 
 /* Environment in SPI NOR flash */
 
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index 5f26119..f5ea365 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -19,8 +19,6 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
 
 /* Environment in SPI NOR flash */
 
diff --git a/include/configs/durian.h b/include/configs/durian.h
index c0ea42e..ce9e57c 100644
--- a/include/configs/durian.h
+++ b/include/configs/durian.h
@@ -21,7 +21,6 @@
 /* SCSI */
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4
 #define CONFIG_SYS_SCSI_MAX_LUN 1
-#define CONFIG_SYS_SCSI_MAX_DEVICE 128
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SATA_MAX_DEVICE 4
 
diff --git a/include/configs/helios4.h b/include/configs/helios4.h
index de1ebbf..c1d42f1 100644
--- a/include/configs/helios4.h
+++ b/include/configs/helios4.h
@@ -40,8 +40,6 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
 /* Keep device tree and initrd in lower memory so the kernel can access them */
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 4ef3a46..6d55974 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -19,8 +19,6 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	5
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					CONFIG_SYS_SCSI_MAX_LUN)
 
 #define CONFIG_BOOT_RETRY_TIME		-1
 #define CONFIG_RESET_TO_RETRY
diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
index bda4283..1027431 100644
--- a/include/configs/ls1012a2g5rdb.h
+++ b/include/configs/ls1012a2g5rdb.h
@@ -20,8 +20,6 @@
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
 #define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 5d56100..e33bafa 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -37,8 +37,6 @@
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
 #define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 
 /* I2C */
 
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 7b4044f..c02be10 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -90,8 +90,6 @@
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-		CONFIG_SYS_SCSI_MAX_LUN)
 
 /* SPI */
 
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 8e3bd77..2c50490 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -77,8 +77,6 @@
 #define CONFIG_SYS_SATA1			AHCI_BASE_ADDR1
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
 #define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 #ifndef SPL_NO_ENV
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index 5ce9ebb..653d2ac 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -59,8 +59,6 @@
 /* SATA */
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
 #define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 #define SCSI_VEND_ID 0x1b4b
 #define SCSI_DEV_ID  0x9170
 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 5f9cb97..083e2e6 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -56,8 +56,6 @@
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
 #define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 
 /*
  * IFC Definitions
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 6d9cbc8..507d770 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -236,8 +236,6 @@
 #ifndef SPL_NO_SATA
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		2
 #define CONFIG_SYS_SCSI_MAX_LUN			2
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 #define SCSI_VEND_ID 0x1b4b
 #define SCSI_DEV_ID  0x9170
 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 04dc830..15d4364 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -128,8 +128,6 @@
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
 #define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
 /* FMan ucode */
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 9350dad..e9a9c64 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -133,8 +133,6 @@
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
 /* Physical Memory Map */
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 07cf59f..8b4ea49 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -40,8 +40,6 @@
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
 #define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 
 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128*1024*1024)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 6d8effe..1253698 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -50,8 +50,6 @@
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
 #define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 
 #if !defined(CONFIG_FSL_QSPI) || defined(CONFIG_TFABOOT)
 
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 26e4e7b..eb88a57 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -114,8 +114,6 @@
 #define CONFIG_SYS_SATA2		AHCI_BASE_ADDR2
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
 /* USB */
diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h
index e7f7e77..c192512 100644
--- a/include/configs/mvebu_armada-37xx.h
+++ b/include/configs/mvebu_armada-37xx.h
@@ -57,8 +57,6 @@
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
 
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index ac0fddd..6a113ec 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -52,8 +52,6 @@
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
 
 /*
  * PCI configuration
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 188ab0b..e9a9d50 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -52,7 +52,5 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
 #define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 
 #endif /* __CONFIG_OMAP5_EVM_H */
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 86b93bc..a352d6e 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -30,7 +30,6 @@
 #endif
 
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_DEVICE	2
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	8
 #define CONFIG_SYS_SCSI_MAX_LUN		4
 
diff --git a/include/scsi.h b/include/scsi.h
index 66a2caa..b47c746 100644
--- a/include/scsi.h
+++ b/include/scsi.h
@@ -9,6 +9,10 @@
 #include <asm/cache.h>
 #include <linux/dma-direction.h>
 
+/* Fix this to the maximum */
+#define SCSI_MAX_DEVICE \
+	(CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
+
 struct udevice;
 
 struct scsi_cmd {
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 3d79f78..7d8829e 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1854,7 +1854,6 @@
 CONFIG_SYS_SCCR_TSEC2CM
 CONFIG_SYS_SCCR_USBDRCM
 CONFIG_SYS_SCR
-CONFIG_SYS_SCSI_MAX_DEVICE
 CONFIG_SYS_SCSI_MAX_LUN
 CONFIG_SYS_SCSI_MAX_SCSI_ID
 CONFIG_SYS_SDRAM