/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2020 Sean Anderson <seanga2@gmail.com>
 */

#ifndef DT_K210_PINCTRL_H
#define DT_K210_PINCTRL_H

/*
 * Full list of FPIOA functions from
 * kendryte-standalone-sdk/lib/drivers/include/fpioa.h
 */
#define K210_PCF_MASK GENMASK(7, 0)
#define K210_PCF_JTAG_TCLK      0   /* JTAG Test Clock */
#define K210_PCF_JTAG_TDI       1   /* JTAG Test Data In */
#define K210_PCF_JTAG_TMS       2   /* JTAG Test Mode Select */
#define K210_PCF_JTAG_TDO       3   /* JTAG Test Data Out */
#define K210_PCF_SPI0_D0        4   /* SPI0 Data 0 */
#define K210_PCF_SPI0_D1        5   /* SPI0 Data 1 */
#define K210_PCF_SPI0_D2        6   /* SPI0 Data 2 */
#define K210_PCF_SPI0_D3        7   /* SPI0 Data 3 */
#define K210_PCF_SPI0_D4        8   /* SPI0 Data 4 */
#define K210_PCF_SPI0_D5        9   /* SPI0 Data 5 */
#define K210_PCF_SPI0_D6        10  /* SPI0 Data 6 */
#define K210_PCF_SPI0_D7        11  /* SPI0 Data 7 */
#define K210_PCF_SPI0_SS0       12  /* SPI0 Chip Select 0 */
#define K210_PCF_SPI0_SS1       13  /* SPI0 Chip Select 1 */
#define K210_PCF_SPI0_SS2       14  /* SPI0 Chip Select 2 */
#define K210_PCF_SPI0_SS3       15  /* SPI0 Chip Select 3 */
#define K210_PCF_SPI0_ARB       16  /* SPI0 Arbitration */
#define K210_PCF_SPI0_SCLK      17  /* SPI0 Serial Clock */
#define K210_PCF_UARTHS_RX      18  /* UART High speed Receiver */
#define K210_PCF_UARTHS_TX      19  /* UART High speed Transmitter */
#define K210_PCF_RESV6          20  /* Reserved function */
#define K210_PCF_RESV7          21  /* Reserved function */
#define K210_PCF_CLK_SPI1       22  /* Clock SPI1 */
#define K210_PCF_CLK_I2C1       23  /* Clock I2C1 */
#define K210_PCF_GPIOHS0        24  /* GPIO High speed 0 */
#define K210_PCF_GPIOHS1        25  /* GPIO High speed 1 */
#define K210_PCF_GPIOHS2        26  /* GPIO High speed 2 */
#define K210_PCF_GPIOHS3        27  /* GPIO High speed 3 */
#define K210_PCF_GPIOHS4        28  /* GPIO High speed 4 */
#define K210_PCF_GPIOHS5        29  /* GPIO High speed 5 */
#define K210_PCF_GPIOHS6        30  /* GPIO High speed 6 */
#define K210_PCF_GPIOHS7        31  /* GPIO High speed 7 */
#define K210_PCF_GPIOHS8        32  /* GPIO High speed 8 */
#define K210_PCF_GPIOHS9        33  /* GPIO High speed 9 */
#define K210_PCF_GPIOHS10       34  /* GPIO High speed 10 */
#define K210_PCF_GPIOHS11       35  /* GPIO High speed 11 */
#define K210_PCF_GPIOHS12       36  /* GPIO High speed 12 */
#define K210_PCF_GPIOHS13       37  /* GPIO High speed 13 */
#define K210_PCF_GPIOHS14       38  /* GPIO High speed 14 */
#define K210_PCF_GPIOHS15       39  /* GPIO High speed 15 */
#define K210_PCF_GPIOHS16       40  /* GPIO High speed 16 */
#define K210_PCF_GPIOHS17       41  /* GPIO High speed 17 */
#define K210_PCF_GPIOHS18       42  /* GPIO High speed 18 */
#define K210_PCF_GPIOHS19       43  /* GPIO High speed 19 */
#define K210_PCF_GPIOHS20       44  /* GPIO High speed 20 */
#define K210_PCF_GPIOHS21       45  /* GPIO High speed 21 */
#define K210_PCF_GPIOHS22       46  /* GPIO High speed 22 */
#define K210_PCF_GPIOHS23       47  /* GPIO High speed 23 */
#define K210_PCF_GPIOHS24       48  /* GPIO High speed 24 */
#define K210_PCF_GPIOHS25       49  /* GPIO High speed 25 */
#define K210_PCF_GPIOHS26       50  /* GPIO High speed 26 */
#define K210_PCF_GPIOHS27       51  /* GPIO High speed 27 */
#define K210_PCF_GPIOHS28       52  /* GPIO High speed 28 */
#define K210_PCF_GPIOHS29       53  /* GPIO High speed 29 */
#define K210_PCF_GPIOHS30       54  /* GPIO High speed 30 */
#define K210_PCF_GPIOHS31       55  /* GPIO High speed 31 */
#define K210_PCF_GPIO0          56  /* GPIO pin 0 */
#define K210_PCF_GPIO1          57  /* GPIO pin 1 */
#define K210_PCF_GPIO2          58  /* GPIO pin 2 */
#define K210_PCF_GPIO3          59  /* GPIO pin 3 */
#define K210_PCF_GPIO4          60  /* GPIO pin 4 */
#define K210_PCF_GPIO5          61  /* GPIO pin 5 */
#define K210_PCF_GPIO6          62  /* GPIO pin 6 */
#define K210_PCF_GPIO7          63  /* GPIO pin 7 */
#define K210_PCF_UART1_RX       64  /* UART1 Receiver */
#define K210_PCF_UART1_TX       65  /* UART1 Transmitter */
#define K210_PCF_UART2_RX       66  /* UART2 Receiver */
#define K210_PCF_UART2_TX       67  /* UART2 Transmitter */
#define K210_PCF_UART3_RX       68  /* UART3 Receiver */
#define K210_PCF_UART3_TX       69  /* UART3 Transmitter */
#define K210_PCF_SPI1_D0        70  /* SPI1 Data 0 */
#define K210_PCF_SPI1_D1        71  /* SPI1 Data 1 */
#define K210_PCF_SPI1_D2        72  /* SPI1 Data 2 */
#define K210_PCF_SPI1_D3        73  /* SPI1 Data 3 */
#define K210_PCF_SPI1_D4        74  /* SPI1 Data 4 */
#define K210_PCF_SPI1_D5        75  /* SPI1 Data 5 */
#define K210_PCF_SPI1_D6        76  /* SPI1 Data 6 */
#define K210_PCF_SPI1_D7        77  /* SPI1 Data 7 */
#define K210_PCF_SPI1_SS0       78  /* SPI1 Chip Select 0 */
#define K210_PCF_SPI1_SS1       79  /* SPI1 Chip Select 1 */
#define K210_PCF_SPI1_SS2       80  /* SPI1 Chip Select 2 */
#define K210_PCF_SPI1_SS3       81  /* SPI1 Chip Select 3 */
#define K210_PCF_SPI1_ARB       82  /* SPI1 Arbitration */
#define K210_PCF_SPI1_SCLK      83  /* SPI1 Serial Clock */
#define K210_PCF_SPI2_D0        84  /* SPI2 Data 0 */
#define K210_PCF_SPI2_SS        85  /* SPI2 Select */
#define K210_PCF_SPI2_SCLK      86  /* SPI2 Serial Clock */
#define K210_PCF_I2S0_MCLK      87  /* I2S0 Master Clock */
#define K210_PCF_I2S0_SCLK      88  /* I2S0 Serial Clock(BCLK) */
#define K210_PCF_I2S0_WS        89  /* I2S0 Word Select(LRCLK) */
#define K210_PCF_I2S0_IN_D0     90  /* I2S0 Serial Data Input 0 */
#define K210_PCF_I2S0_IN_D1     91  /* I2S0 Serial Data Input 1 */
#define K210_PCF_I2S0_IN_D2     92  /* I2S0 Serial Data Input 2 */
#define K210_PCF_I2S0_IN_D3     93  /* I2S0 Serial Data Input 3 */
#define K210_PCF_I2S0_OUT_D0    94  /* I2S0 Serial Data Output 0 */
#define K210_PCF_I2S0_OUT_D1    95  /* I2S0 Serial Data Output 1 */
#define K210_PCF_I2S0_OUT_D2    96  /* I2S0 Serial Data Output 2 */
#define K210_PCF_I2S0_OUT_D3    97  /* I2S0 Serial Data Output 3 */
#define K210_PCF_I2S1_MCLK      98  /* I2S1 Master Clock */
#define K210_PCF_I2S1_SCLK      99  /* I2S1 Serial Clock(BCLK) */
#define K210_PCF_I2S1_WS        100 /* I2S1 Word Select(LRCLK) */
#define K210_PCF_I2S1_IN_D0     101 /* I2S1 Serial Data Input 0 */
#define K210_PCF_I2S1_IN_D1     102 /* I2S1 Serial Data Input 1 */
#define K210_PCF_I2S1_IN_D2     103 /* I2S1 Serial Data Input 2 */
#define K210_PCF_I2S1_IN_D3     104 /* I2S1 Serial Data Input 3 */
#define K210_PCF_I2S1_OUT_D0    105 /* I2S1 Serial Data Output 0 */
#define K210_PCF_I2S1_OUT_D1    106 /* I2S1 Serial Data Output 1 */
#define K210_PCF_I2S1_OUT_D2    107 /* I2S1 Serial Data Output 2 */
#define K210_PCF_I2S1_OUT_D3    108 /* I2S1 Serial Data Output 3 */
#define K210_PCF_I2S2_MCLK      109 /* I2S2 Master Clock */
#define K210_PCF_I2S2_SCLK      110 /* I2S2 Serial Clock(BCLK) */
#define K210_PCF_I2S2_WS        111 /* I2S2 Word Select(LRCLK) */
#define K210_PCF_I2S2_IN_D0     112 /* I2S2 Serial Data Input 0 */
#define K210_PCF_I2S2_IN_D1     113 /* I2S2 Serial Data Input 1 */
#define K210_PCF_I2S2_IN_D2     114 /* I2S2 Serial Data Input 2 */
#define K210_PCF_I2S2_IN_D3     115 /* I2S2 Serial Data Input 3 */
#define K210_PCF_I2S2_OUT_D0    116 /* I2S2 Serial Data Output 0 */
#define K210_PCF_I2S2_OUT_D1    117 /* I2S2 Serial Data Output 1 */
#define K210_PCF_I2S2_OUT_D2    118 /* I2S2 Serial Data Output 2 */
#define K210_PCF_I2S2_OUT_D3    119 /* I2S2 Serial Data Output 3 */
#define K210_PCF_RESV0          120 /* Reserved function */
#define K210_PCF_RESV1          121 /* Reserved function */
#define K210_PCF_RESV2          122 /* Reserved function */
#define K210_PCF_RESV3          123 /* Reserved function */
#define K210_PCF_RESV4          124 /* Reserved function */
#define K210_PCF_RESV5          125 /* Reserved function */
#define K210_PCF_I2C0_SCLK      126 /* I2C0 Serial Clock */
#define K210_PCF_I2C0_SDA       127 /* I2C0 Serial Data */
#define K210_PCF_I2C1_SCLK      128 /* I2C1 Serial Clock */
#define K210_PCF_I2C1_SDA       129 /* I2C1 Serial Data */
#define K210_PCF_I2C2_SCLK      130 /* I2C2 Serial Clock */
#define K210_PCF_I2C2_SDA       131 /* I2C2 Serial Data */
#define K210_PCF_DVP_XCLK       132 /* DVP System Clock */
#define K210_PCF_DVP_RST        133 /* DVP System Reset */
#define K210_PCF_DVP_PWDN       134 /* DVP Power Down Mode */
#define K210_PCF_DVP_VSYNC      135 /* DVP Vertical Sync */
#define K210_PCF_DVP_HSYNC      136 /* DVP Horizontal Sync */
#define K210_PCF_DVP_PCLK       137 /* Pixel Clock */
#define K210_PCF_DVP_D0         138 /* Data Bit 0 */
#define K210_PCF_DVP_D1         139 /* Data Bit 1 */
#define K210_PCF_DVP_D2         140 /* Data Bit 2 */
#define K210_PCF_DVP_D3         141 /* Data Bit 3 */
#define K210_PCF_DVP_D4         142 /* Data Bit 4 */
#define K210_PCF_DVP_D5         143 /* Data Bit 5 */
#define K210_PCF_DVP_D6         144 /* Data Bit 6 */
#define K210_PCF_DVP_D7         145 /* Data Bit 7 */
#define K210_PCF_SCCB_SCLK      146 /* Serial Camera Control Bus Clock */
#define K210_PCF_SCCB_SDA       147 /* Serial Camera Control Bus Data */
#define K210_PCF_UART1_CTS      148 /* UART1 Clear To Send */
#define K210_PCF_UART1_DSR      149 /* UART1 Data Set Ready */
#define K210_PCF_UART1_DCD      150 /* UART1 Data Carrier Detect */
#define K210_PCF_UART1_RI       151 /* UART1 Ring Indicator */
#define K210_PCF_UART1_SIR_IN   152 /* UART1 Serial Infrared Input */
#define K210_PCF_UART1_DTR      153 /* UART1 Data Terminal Ready */
#define K210_PCF_UART1_RTS      154 /* UART1 Request To Send */
#define K210_PCF_UART1_OUT2     155 /* UART1 User-designated Output 2 */
#define K210_PCF_UART1_OUT1     156 /* UART1 User-designated Output 1 */
#define K210_PCF_UART1_SIR_OUT  157 /* UART1 Serial Infrared Output */
#define K210_PCF_UART1_BAUD     158 /* UART1 Transmit Clock Output */
#define K210_PCF_UART1_RE       159 /* UART1 Receiver Output Enable */
#define K210_PCF_UART1_DE       160 /* UART1 Driver Output Enable */
#define K210_PCF_UART1_RS485_EN 161 /* UART1 RS485 Enable */
#define K210_PCF_UART2_CTS      162 /* UART2 Clear To Send */
#define K210_PCF_UART2_DSR      163 /* UART2 Data Set Ready */
#define K210_PCF_UART2_DCD      164 /* UART2 Data Carrier Detect */
#define K210_PCF_UART2_RI       165 /* UART2 Ring Indicator */
#define K210_PCF_UART2_SIR_IN   166 /* UART2 Serial Infrared Input */
#define K210_PCF_UART2_DTR      167 /* UART2 Data Terminal Ready */
#define K210_PCF_UART2_RTS      168 /* UART2 Request To Send */
#define K210_PCF_UART2_OUT2     169 /* UART2 User-designated Output 2 */
#define K210_PCF_UART2_OUT1     170 /* UART2 User-designated Output 1 */
#define K210_PCF_UART2_SIR_OUT  171 /* UART2 Serial Infrared Output */
#define K210_PCF_UART2_BAUD     172 /* UART2 Transmit Clock Output */
#define K210_PCF_UART2_RE       173 /* UART2 Receiver Output Enable */
#define K210_PCF_UART2_DE       174 /* UART2 Driver Output Enable */
#define K210_PCF_UART2_RS485_EN 175 /* UART2 RS485 Enable */
#define K210_PCF_UART3_CTS      176 /* UART3 Clear To Send */
#define K210_PCF_UART3_DSR      177 /* UART3 Data Set Ready */
#define K210_PCF_UART3_DCD      178 /* UART3 Data Carrier Detect */
#define K210_PCF_UART3_RI       179 /* UART3 Ring Indicator */
#define K210_PCF_UART3_SIR_IN   180 /* UART3 Serial Infrared Input */
#define K210_PCF_UART3_DTR      181 /* UART3 Data Terminal Ready */
#define K210_PCF_UART3_RTS      182 /* UART3 Request To Send */
#define K210_PCF_UART3_OUT2     183 /* UART3 User-designated Output 2 */
#define K210_PCF_UART3_OUT1     184 /* UART3 User-designated Output 1 */
#define K210_PCF_UART3_SIR_OUT  185 /* UART3 Serial Infrared Output */
#define K210_PCF_UART3_BAUD     186 /* UART3 Transmit Clock Output */
#define K210_PCF_UART3_RE       187 /* UART3 Receiver Output Enable */
#define K210_PCF_UART3_DE       188 /* UART3 Driver Output Enable */
#define K210_PCF_UART3_RS485_EN 189 /* UART3 RS485 Enable */
#define K210_PCF_TIMER0_TOGGLE1 190 /* TIMER0 Toggle Output 1 */
#define K210_PCF_TIMER0_TOGGLE2 191 /* TIMER0 Toggle Output 2 */
#define K210_PCF_TIMER0_TOGGLE3 192 /* TIMER0 Toggle Output 3 */
#define K210_PCF_TIMER0_TOGGLE4 193 /* TIMER0 Toggle Output 4 */
#define K210_PCF_TIMER1_TOGGLE1 194 /* TIMER1 Toggle Output 1 */
#define K210_PCF_TIMER1_TOGGLE2 195 /* TIMER1 Toggle Output 2 */
#define K210_PCF_TIMER1_TOGGLE3 196 /* TIMER1 Toggle Output 3 */
#define K210_PCF_TIMER1_TOGGLE4 197 /* TIMER1 Toggle Output 4 */
#define K210_PCF_TIMER2_TOGGLE1 198 /* TIMER2 Toggle Output 1 */
#define K210_PCF_TIMER2_TOGGLE2 199 /* TIMER2 Toggle Output 2 */
#define K210_PCF_TIMER2_TOGGLE3 200 /* TIMER2 Toggle Output 3 */
#define K210_PCF_TIMER2_TOGGLE4 201 /* TIMER2 Toggle Output 4 */
#define K210_PCF_CLK_SPI2       202 /* Clock SPI2 */
#define K210_PCF_CLK_I2C2       203 /* Clock I2C2 */
#define K210_PCF_INTERNAL0      204 /* Internal function signal 0 */
#define K210_PCF_INTERNAL1      205 /* Internal function signal 1 */
#define K210_PCF_INTERNAL2      206 /* Internal function signal 2 */
#define K210_PCF_INTERNAL3      207 /* Internal function signal 3 */
#define K210_PCF_INTERNAL4      208 /* Internal function signal 4 */
#define K210_PCF_INTERNAL5      209 /* Internal function signal 5 */
#define K210_PCF_INTERNAL6      210 /* Internal function signal 6 */
#define K210_PCF_INTERNAL7      211 /* Internal function signal 7 */
#define K210_PCF_INTERNAL8      212 /* Internal function signal 8 */
#define K210_PCF_INTERNAL9      213 /* Internal function signal 9 */
#define K210_PCF_INTERNAL10     214 /* Internal function signal 10 */
#define K210_PCF_INTERNAL11     215 /* Internal function signal 11 */
#define K210_PCF_INTERNAL12     216 /* Internal function signal 12 */
#define K210_PCF_INTERNAL13     217 /* Internal function signal 13 */
#define K210_PCF_INTERNAL14     218 /* Internal function signal 14 */
#define K210_PCF_INTERNAL15     219 /* Internal function signal 15 */
#define K210_PCF_INTERNAL16     220 /* Internal function signal 16 */
#define K210_PCF_INTERNAL17     221 /* Internal function signal 17 */
#define K210_PCF_CONSTANT       222 /* Constant function */
#define K210_PCF_INTERNAL18     223 /* Internal function signal 18 */
#define K210_PCF_DEBUG0         224 /* Debug function 0 */
#define K210_PCF_DEBUG1         225 /* Debug function 1 */
#define K210_PCF_DEBUG2         226 /* Debug function 2 */
#define K210_PCF_DEBUG3         227 /* Debug function 3 */
#define K210_PCF_DEBUG4         228 /* Debug function 4 */
#define K210_PCF_DEBUG5         229 /* Debug function 5 */
#define K210_PCF_DEBUG6         230 /* Debug function 6 */
#define K210_PCF_DEBUG7         231 /* Debug function 7 */
#define K210_PCF_DEBUG8         232 /* Debug function 8 */
#define K210_PCF_DEBUG9         233 /* Debug function 9 */
#define K210_PCF_DEBUG10        234 /* Debug function 10 */
#define K210_PCF_DEBUG11        235 /* Debug function 11 */
#define K210_PCF_DEBUG12        236 /* Debug function 12 */
#define K210_PCF_DEBUG13        237 /* Debug function 13 */
#define K210_PCF_DEBUG14        238 /* Debug function 14 */
#define K210_PCF_DEBUG15        239 /* Debug function 15 */
#define K210_PCF_DEBUG16        240 /* Debug function 16 */
#define K210_PCF_DEBUG17        241 /* Debug function 17 */
#define K210_PCF_DEBUG18        242 /* Debug function 18 */
#define K210_PCF_DEBUG19        243 /* Debug function 19 */
#define K210_PCF_DEBUG20        244 /* Debug function 20 */
#define K210_PCF_DEBUG21        245 /* Debug function 21 */
#define K210_PCF_DEBUG22        246 /* Debug function 22 */
#define K210_PCF_DEBUG23        247 /* Debug function 23 */
#define K210_PCF_DEBUG24        248 /* Debug function 24 */
#define K210_PCF_DEBUG25        249 /* Debug function 25 */
#define K210_PCF_DEBUG26        250 /* Debug function 26 */
#define K210_PCF_DEBUG27        251 /* Debug function 27 */
#define K210_PCF_DEBUG28        252 /* Debug function 28 */
#define K210_PCF_DEBUG29        253 /* Debug function 29 */
#define K210_PCF_DEBUG30        254 /* Debug function 30 */
#define K210_PCF_DEBUG31        255 /* Debug function 31 */

#define K210_FPIOA(pin, func) (((pin) << 16) | (func))
#define K210_FPIOA_DO(pin, func) (((pin) << 16) | (1 << 8) | (func))

#define K210_PC_POWER_3V3 0
#define K210_PC_POWER_1V8 1

#endif /* DT_K210_PINCTRL_H */