/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (c) 2014 The Chromium OS Authors.
 *
 * Part of this file is adapted from coreboot
 * src/arch/x86/include/arch/cpu.h and
 * src/arch/x86/lib/cpu.c
 */

#ifndef _ASM_CPU_H
#define _ASM_CPU_H

enum {
	X86_VENDOR_INVALID = 0,
	X86_VENDOR_INTEL,
	X86_VENDOR_CYRIX,
	X86_VENDOR_AMD,
	X86_VENDOR_UMC,
	X86_VENDOR_NEXGEN,
	X86_VENDOR_CENTAUR,
	X86_VENDOR_RISE,
	X86_VENDOR_TRANSMETA,
	X86_VENDOR_NSC,
	X86_VENDOR_SIS,
	X86_VENDOR_ANY = 0xfe,
	X86_VENDOR_UNKNOWN = 0xff
};

/* Global descriptor table (GDT) bits */
enum {
	GDT_4KB			= 1ULL << 55,
	GDT_32BIT		= 1ULL << 54,
	GDT_LONG		= 1ULL << 53,
	GDT_PRESENT		= 1ULL << 47,
	GDT_NOTSYS		= 1ULL << 44,
	GDT_CODE		= 1ULL << 43,
	GDT_LIMIT_LOW_SHIFT	= 0,
	GDT_LIMIT_LOW_MASK	= 0xffff,
	GDT_LIMIT_HIGH_SHIFT	= 48,
	GDT_LIMIT_HIGH_MASK	= 0xf,
	GDT_BASE_LOW_SHIFT	= 16,
	GDT_BASE_LOW_MASK	= 0xffff,
	GDT_BASE_HIGH_SHIFT	= 56,
	GDT_BASE_HIGH_MASK	= 0xf,
};

/*
 * System controllers in an x86 system. We mostly need to just find these and
 * use them on PCI. At some point these might have their own uclass (e.g.
 * UCLASS_VIDEO for the GMA device).
 */
enum {
	X86_NONE,
	X86_SYSCON_ME,		/* Intel Management Engine */
	X86_SYSCON_PINCONF,	/* Intel x86 pin configuration */
	X86_SYSCON_PMU,		/* Power Management Unit */
	X86_SYSCON_SCU,		/* System Controller Unit */
	X86_SYSCON_PUNIT,	/* Power unit */
};

struct cpuid_result {
	uint32_t eax;
	uint32_t ebx;
	uint32_t ecx;
	uint32_t edx;
};

/*
 * Generic CPUID function
 */
static inline struct cpuid_result cpuid(int op)
{
	struct cpuid_result result;
	asm volatile(
		"mov %%ebx, %%edi;"
		"cpuid;"
		"mov %%ebx, %%esi;"
		"mov %%edi, %%ebx;"
		: "=a" (result.eax),
		  "=S" (result.ebx),
		  "=c" (result.ecx),
		  "=d" (result.edx)
		: "0" (op)
		: "edi");
	return result;
}

/*
 * Generic Extended CPUID function
 */
static inline struct cpuid_result cpuid_ext(int op, unsigned ecx)
{
	struct cpuid_result result;
	asm volatile(
		"mov %%ebx, %%edi;"
		"cpuid;"
		"mov %%ebx, %%esi;"
		"mov %%edi, %%ebx;"
		: "=a" (result.eax),
		  "=S" (result.ebx),
		  "=c" (result.ecx),
		  "=d" (result.edx)
		: "0" (op), "2" (ecx)
		: "edi");
	return result;
}

/*
 * CPUID functions returning a single datum
 */
static inline unsigned int cpuid_eax(unsigned int op)
{
	unsigned int eax;

	__asm__("mov %%ebx, %%edi;"
		"cpuid;"
		"mov %%edi, %%ebx;"
		: "=a" (eax)
		: "0" (op)
		: "ecx", "edx", "edi");
	return eax;
}

static inline unsigned int cpuid_ebx(unsigned int op)
{
	unsigned int eax, ebx;

	__asm__("mov %%ebx, %%edi;"
		"cpuid;"
		"mov %%ebx, %%esi;"
		"mov %%edi, %%ebx;"
		: "=a" (eax), "=S" (ebx)
		: "0" (op)
		: "ecx", "edx", "edi");
	return ebx;
}

static inline unsigned int cpuid_ecx(unsigned int op)
{
	unsigned int eax, ecx;

	__asm__("mov %%ebx, %%edi;"
		"cpuid;"
		"mov %%edi, %%ebx;"
		: "=a" (eax), "=c" (ecx)
		: "0" (op)
		: "edx", "edi");
	return ecx;
}

static inline unsigned int cpuid_edx(unsigned int op)
{
	unsigned int eax, edx;

	__asm__("mov %%ebx, %%edi;"
		"cpuid;"
		"mov %%edi, %%ebx;"
		: "=a" (eax), "=d" (edx)
		: "0" (op)
		: "ecx", "edi");
	return edx;
}

#if !CONFIG_IS_ENABLED(X86_64)

/* Standard macro to see if a specific flag is changeable */
static inline int flag_is_changeable_p(uint32_t flag)
{
	uint32_t f1, f2;

	asm(
		"pushfl\n\t"
		"pushfl\n\t"
		"popl %0\n\t"
		"movl %0,%1\n\t"
		"xorl %2,%0\n\t"
		"pushl %0\n\t"
		"popfl\n\t"
		"pushfl\n\t"
		"popl %0\n\t"
		"popfl\n\t"
		: "=&r" (f1), "=&r" (f2)
		: "ir" (flag));
	return ((f1^f2) & flag) != 0;
}
#endif

static inline void mfence(void)
{
	__asm__ __volatile__("mfence" : : : "memory");
}

/**
 * cpu_enable_paging_pae() - Enable PAE-paging
 *
 * @cr3:	Value to set in cr3 (PDPT or PML4T)
 */
void cpu_enable_paging_pae(ulong cr3);

/**
 * cpu_disable_paging_pae() - Disable paging and PAE
 */
void cpu_disable_paging_pae(void);

/**
 * cpu_has_64bit() - Check if the CPU has 64-bit support
 *
 * @return 1 if this CPU supports long mode (64-bit), 0 if not
 */
int cpu_has_64bit(void);

/**
 * cpu_vendor_name() - Get CPU vendor name
 *
 * @vendor:	CPU vendor enumeration number
 *
 * @return:	Address to hold the CPU vendor name string
 */
const char *cpu_vendor_name(int vendor);

#define CPU_MAX_NAME_LEN	49

/**
 * cpu_get_name() - Get the name of the current cpu
 *
 * @name: Place to put name, which must be CPU_MAX_NAME_LEN bytes including
 * @return pointer to name, which will likely be a few bytes after the start
 * of @name
 * \0 terminator
 */
char *cpu_get_name(char *name);

/**
 * cpu_call64() - Jump to a 64-bit Linux kernel (internal function)
 *
 * The kernel is uncompressed and the 64-bit entry point is expected to be
 * at @target.
 *
 * This function is used internally - see cpu_jump_to_64bit() for a more
 * useful function.
 *
 * @pgtable:	Address of 24KB area containing the page table
 * @setup_base:	Pointer to the setup.bin information for the kernel
 * @target:	Pointer to the start of the kernel image
 */
void cpu_call64(ulong pgtable, ulong setup_base, ulong target);

/**
 * cpu_call32() - Jump to a 32-bit entry point
 *
 * @code_seg32:	32-bit code segment to use (GDT offset, e.g. 0x20)
 * @target:	Pointer to the start of the 32-bit U-Boot image/entry point
 * @table:	Pointer to start of info table to pass to U-Boot
 */
void cpu_call32(ulong code_seg32, ulong target, ulong table);

/**
 * cpu_jump_to_64bit() - Jump to a 64-bit Linux kernel
 *
 * The kernel is uncompressed and the 64-bit entry point is expected to be
 * at @target.
 *
 * @setup_base:	Pointer to the setup.bin information for the kernel
 * @target:	Pointer to the start of the kernel image
 */
int cpu_jump_to_64bit(ulong setup_base, ulong target);

/**
 * cpu_jump_to_64bit_uboot() - special function to jump from SPL to U-Boot
 *
 * This handles calling from 32-bit SPL to 64-bit U-Boot.
 *
 * @target:	Address of U-Boot in RAM
 */
int cpu_jump_to_64bit_uboot(ulong target);

/**
 * cpu_get_family_model() - Get the family and model for the CPU
 *
 * @return the CPU ID masked with 0x0fff0ff0
 */
u32 cpu_get_family_model(void);

/**
 * cpu_get_stepping() - Get the stepping value for the CPU
 *
 * @return the CPU ID masked with 0xf
 */
u32 cpu_get_stepping(void);

/**
 * cpu_phys_address_size() - Get the physical address size in bits
 *
 * This is 32 for older CPUs but newer ones may support 36.
 *
 * @return address size (typically 32 or 36)
 */
int cpu_phys_address_size(void);

#endif