CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_MALLOC_LEN=0xa00000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SF_DEFAULT_SPEED=25000000
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_IMX_CONFIG="board/liebherr/mccmon6/mon6_imximage_sd.cfg"
CONFIG_MX6QDL=y
CONFIG_TARGET_MCCMON6=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-mccmon6"
CONFIG_SYS_MONITOR_LEN=409600
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
# CONFIG_CMD_BMODE is not set
CONFIG_ENV_ADDR=0x8040000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_PBSIZE=532
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SYS_MAXARGS=32
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NOR_OFS=0x09600000
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_PINMUX is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=8000000.nor"
CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m@0x0(mccmon6-image.nor),256k@0x40000(u-boot-env.nor),1m@0x80000(u-boot.nor),8m@0x180000(kernel.nor),8m@0x980000(swupdate-kernel.nor),8m@0x1180000(swupdate-rootfs.nor)"
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_ENV_ADDR_REDUND=0x8060000
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_MXC=y
CONFIG_FSL_USDHC=y
CONFIG_DM_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y
CONFIG_FLASH_SHOW_PROGRESS=0
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_FLASH_VERIFY=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_FEC_MXC=y
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_PFUZE100=y
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_MXC_UART=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_DM_THERMAL=y