| Michael Walle | 4ceb5c6 | 2020-10-15 23:08:57 +0200 | [diff] [blame] | 1 | CONFIG_ARM=y |
| 2 | CONFIG_TARGET_SL28=y |
| 3 | CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| 4 | CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| 5 | CONFIG_SYS_MALLOC_F_LEN=0x4000 |
| 6 | CONFIG_NR_DRAM_BANKS=2 |
| 7 | CONFIG_ENV_SIZE=0x2000 |
| 8 | CONFIG_ENV_OFFSET=0x3e0000 |
| 9 | CONFIG_ENV_SECT_SIZE=0x10000 |
| 10 | CONFIG_SYS_SPI_U_BOOT_OFFS=0x230000 |
| 11 | CONFIG_DM_GPIO=y |
| 12 | CONFIG_SPL_DM_SPI=y |
| 13 | CONFIG_SPL_TEXT_BASE=0x18010000 |
| 14 | CONFIG_SYS_FSL_SDHC_CLK_DIV=1 |
| 15 | CONFIG_SPL_SERIAL_SUPPORT=y |
| 16 | CONFIG_SPL_SIZE_LIMIT=0x20000 |
| 17 | CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0 |
| 18 | CONFIG_SPL=y |
| 19 | CONFIG_ENV_OFFSET_REDUND=0x3f0000 |
| 20 | CONFIG_SPL_SPI_FLASH_SUPPORT=y |
| 21 | CONFIG_SPL_SPI_SUPPORT=y |
| 22 | # CONFIG_PSCI_RESET is not set |
| 23 | CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-kontron-sl28" |
| 24 | CONFIG_AHCI=y |
| 25 | CONFIG_DISTRO_DEFAULTS=y |
| 26 | CONFIG_FIT=y |
| 27 | CONFIG_SPL_LOAD_FIT=y |
| 28 | # CONFIG_USE_SPL_FIT_GENERATOR is not set |
| 29 | CONFIG_OF_BOARD_SETUP=y |
| 30 | CONFIG_OF_STDOUT_VIA_ALIAS=y |
| 31 | CONFIG_BOOTDELAY=10 |
| 32 | CONFIG_USE_BOOTARGS=y |
| 33 | CONFIG_BOARD_LATE_INIT=y |
| 34 | CONFIG_PCI_INIT_R=y |
| 35 | CONFIG_SPL_BOARD_INIT=y |
| 36 | CONFIG_SPL_SEPARATE_BSS=y |
| 37 | CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y |
| 38 | CONFIG_SPL_DM_SPI_FLASH=y |
| 39 | CONFIG_SPL_SPI_LOAD=y |
| 40 | CONFIG_CMD_ASKENV=y |
| 41 | CONFIG_CMD_GREPENV=y |
| 42 | CONFIG_CMD_NVEDIT_EFI=y |
| 43 | CONFIG_CMD_DM=y |
| 44 | CONFIG_CMD_GPT=y |
| 45 | CONFIG_CMD_I2C=y |
| 46 | CONFIG_CMD_MMC=y |
| 47 | CONFIG_CMD_PCI=y |
| 48 | CONFIG_CMD_USB=y |
| 49 | CONFIG_CMD_CACHE=y |
| 50 | CONFIG_CMD_EFIDEBUG=y |
| 51 | CONFIG_CMD_RNG=y |
| 52 | CONFIG_MP=y |
| 53 | CONFIG_OF_CONTROL=y |
| 54 | CONFIG_SPL_OF_CONTROL=y |
| 55 | CONFIG_OF_LIST="" |
| 56 | CONFIG_ENV_OVERWRITE=y |
| 57 | CONFIG_ENV_IS_IN_SPI_FLASH=y |
| 58 | CONFIG_SYS_REDUNDAND_ENVIRONMENT=y |
| 59 | CONFIG_NET_RANDOM_ETHADDR=y |
| 60 | CONFIG_NETCONSOLE=y |
| 61 | CONFIG_DM=y |
| 62 | CONFIG_SPL_DM=y |
| 63 | CONFIG_SPL_DM_SEQ_ALIAS=y |
| 64 | CONFIG_SCSI_AHCI=y |
| 65 | CONFIG_FSL_CAAM=y |
| 66 | CONFIG_SYS_FSL_DDR3=y |
| 67 | CONFIG_DM_I2C=y |
| 68 | CONFIG_I2C_SET_DEFAULT_BUS_NUM=y |
| 69 | CONFIG_I2C_DEFAULT_BUS_NUMBER=0 |
| 70 | CONFIG_I2C_MUX=y |
| 71 | CONFIG_DM_MMC=y |
| 72 | CONFIG_MMC_HS400_SUPPORT=y |
| 73 | CONFIG_FSL_ESDHC=y |
| 74 | CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y |
| 75 | CONFIG_DM_SPI_FLASH=y |
| 76 | CONFIG_SPI_FLASH_WINBOND=y |
| 77 | # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set |
| 78 | CONFIG_PHYLIB=y |
| 79 | CONFIG_PHY_ATHEROS=y |
| 80 | CONFIG_DM_ETH=y |
| 81 | CONFIG_DM_MDIO=y |
| 82 | CONFIG_PHY_GIGE=y |
| 83 | CONFIG_E1000=y |
| 84 | CONFIG_FSL_ENETC=y |
| 85 | CONFIG_NVME=y |
| 86 | CONFIG_PCI=y |
| 87 | CONFIG_DM_PCI=y |
| 88 | CONFIG_DM_PCI_COMPAT=y |
| 89 | CONFIG_PCIE_ECAM_GENERIC=y |
| 90 | CONFIG_PCIE_LAYERSCAPE_RC=y |
| 91 | CONFIG_DM_RNG=y |
| 92 | CONFIG_DM_RTC=y |
| 93 | CONFIG_RTC_RV8803=y |
| 94 | CONFIG_SCSI=y |
| 95 | CONFIG_DM_SCSI=y |
| 96 | CONFIG_SYS_NS16550=y |
| 97 | CONFIG_SPI=y |
| 98 | CONFIG_DM_SPI=y |
| 99 | CONFIG_FSL_DSPI=y |
| 100 | CONFIG_NXP_FSPI=y |
| 101 | CONFIG_USB=y |
| 102 | CONFIG_DM_USB=y |
| 103 | # CONFIG_SPL_DM_USB is not set |
| 104 | CONFIG_USB_XHCI_HCD=y |
| 105 | CONFIG_USB_XHCI_DWC3=y |
| 106 | CONFIG_OF_LIBFDT_ASSUME_MASK=0x0 |
| 107 | CONFIG_OF_LIBFDT_OVERLAY=y |