blob: e8dfa748efae9d58f75b70c2b896eed01fdac840 [file] [log] [blame]
Łukasz Dałek34cda7a2012-10-15 07:46:54 +00001/*
2 * iPAQ h2200 board configuration
3 *
4 * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Łukasz Dałek34cda7a2012-10-15 07:46:54 +00007 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12#define MACH_TYPE_H2200 341
13#define CONFIG_MACH_TYPE MACH_TYPE_H2200
14
Łukasz Dałek445abdf2014-06-12 15:53:47 +020015#define CONFIG_SYS_GENERIC_BOARD
Łukasz Dałek34cda7a2012-10-15 07:46:54 +000016#define CONFIG_CPU_PXA25X 1
17#define CONFIG_BOARD_H2200
18
19#define CONFIG_SYS_NO_FLASH
20
Łukasz Dałek34cda7a2012-10-15 07:46:54 +000021#define CONFIG_NR_DRAM_BANKS 1
22#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
23#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
24
25#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
26#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE
27
28#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
29
30#define CONFIG_ENV_SIZE 0x00040000
31#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
32
33#define CONFIG_ENV_IS_NOWHERE
34#define CONFIG_SYS_MAXARGS 16
35#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
36
37/*
38 * iPAQ 1st stage bootloader loads 2nd stage bootloader
39 * at address 0xa0040000 but bootloader requires header
40 * which is 0x1000 long.
41 *
42 * --- Header begin ---
43 * .word 0xea0003fe ; b 0x1000
44 *
45 * .org 0x40
46 * .ascii "ECEC"
47 *
48 * .org 0x1000
49 * --- Header end ---
50 */
51
52#define CONFIG_SYS_TEXT_BASE 0xa0041000
53
54/*
55 * Static chips
56 */
57
58#define CONFIG_SYS_MSC0_VAL 0x246c7ffc
59#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
60#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
61
62/*
63 * PCMCIA and CF Interfaces
64 */
65
66#define CONFIG_SYS_MECR_VAL 0x00000000
67#define CONFIG_SYS_MCMEM0_VAL 0x00000000
68#define CONFIG_SYS_MCMEM1_VAL 0x00000000
69#define CONFIG_SYS_MCATT0_VAL 0x00000000
70#define CONFIG_SYS_MCATT1_VAL 0x00000000
71#define CONFIG_SYS_MCIO0_VAL 0x00000000
72#define CONFIG_SYS_MCIO1_VAL 0x00000000
73
74#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
75#define CONFIG_SYS_SXCNFG_VAL 0x00040004
76
77#define CONFIG_SYS_MDREFR_VAL 0x0099E018
78#define CONFIG_SYS_MDCNFG_VAL 0x01C801CB
79#define CONFIG_SYS_MDMRS_VAL 0x00220022
80
81#define CONFIG_SYS_PSSR_VAL 0x00000000
82#define CONFIG_SYS_CKEN 0x00004840
83#define CONFIG_SYS_CCCR 0x00000161
84
85/*
86 * GPIOs
87 */
88
89#define CONFIG_SYS_GPSR0_VAL 0x01000000
90#define CONFIG_SYS_GPSR1_VAL 0x00000000
91#define CONFIG_SYS_GPSR2_VAL 0x00010000
92
93#define CONFIG_SYS_GPCR0_VAL 0x00000000
94#define CONFIG_SYS_GPCR1_VAL 0x00000000
95#define CONFIG_SYS_GPCR2_VAL 0x00000000
96
97#define CONFIG_SYS_GPDR0_VAL 0xF7E38C00
98#define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83
99#define CONFIG_SYS_GPDR2_VAL 0x000157FF
100
101#define CONFIG_SYS_GAFR0_L_VAL 0x80401000
102#define CONFIG_SYS_GAFR0_U_VAL 0x00000112
103#define CONFIG_SYS_GAFR1_L_VAL 0x600A9550
104#define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
105#define CONFIG_SYS_GAFR2_L_VAL 0x20000000
106#define CONFIG_SYS_GAFR2_U_VAL 0x00000000
107
108/*
109 * Serial port
110 */
111
112#define CONFIG_PXA_SERIAL
113#define CONFIG_FFUART
114#define CONFIG_CONS_INDEX 3
115
116#define CONFIG_BAUDRATE 115200
117#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
118
Łukasz Dałek34cda7a2012-10-15 07:46:54 +0000119#define CONFIG_FIT
Tom Rini89736012014-07-22 07:43:28 -0400120#define CONFIG_FIT_DISABLE_SHA256
Łukasz Dałek34cda7a2012-10-15 07:46:54 +0000121#define CONFIG_SETUP_MEMORY_TAGS
122#define CONFIG_CMDLINE_TAG
123#define CONFIG_INITRD_TAG
124
125/* Monitor Command Prompt */
Łukasz Dałek34cda7a2012-10-15 07:46:54 +0000126#define CONFIG_SYS_HUSH_PARSER
127#define CONFIG_SYS_PROMPT_HUSH_PS2 "$ "
128
129/* Console I/O Buffer Size */
130#define CONFIG_SYS_CBSIZE 256
131
132/* Print Buffer Size */
133#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
134 sizeof(CONFIG_SYS_PROMPT) + 16)
135
136#define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
137
Lukasz Daleka33fada2012-11-29 15:55:16 +0100138#define CONFIG_SYS_CONSOLE_IS_IN_ENV
139#define CONFIG_USB_DEV_PULLUP_GPIO 33
140/* USB VBUS GPIO 3 */
141
Lukasz Daleka33fada2012-11-29 15:55:16 +0100142#define CONFIG_CMD_PING
143
144#define CONFIG_BOOTDELAY 2
145#define CONFIG_BOOTCOMMAND \
146 "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
147 "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
148 "source :script ; " \
149 "bootm ; "
150
151#define CONFIG_USB_GADGET_PXA2XX
152#define CONFIG_USB_ETHER
153#define CONFIG_USB_ETH_SUBSET
154
155#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
156#define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02"
157#define CONFIG_EXTRA_ENV_SETTINGS \
158 "stdin=serial\0" \
159 "stdout=serial\0" \
160 "stderr=serial\0"
161
Łukasz Dałek34cda7a2012-10-15 07:46:54 +0000162#endif /* __CONFIG_H */