blob: 13a941ef635c8c677a80f29f4fe3680c6a8a4f39 [file] [log] [blame]
Stefan Roesea8a11a92008-06-06 15:54:31 +02001/*
Detlev Zundelc8355b92009-09-02 17:24:57 +02002 * (C) Copyright 2008, 2009
Stefan Roesea8a11a92008-06-06 15:54:31 +02003 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * Common configuration options for all AMCC boards
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
23#ifndef __AMCC_COMMON_H
24#define __AMCC_COMMON_H
25
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020026#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
27#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of U-Boot */
28#define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
29#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Reserved for malloc */
Stefan Roesea8a11a92008-06-06 15:54:31 +020030
31/*
32 * UART
33 */
34#define CONFIG_BAUDRATE 115200
35#define CONFIG_SERIAL_MULTI
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020036#define CONFIG_SYS_BAUDRATE_TABLE \
Stefan Roesea8a11a92008-06-06 15:54:31 +020037 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
38
39/*
40 * I2C
41 */
42#define CONFIG_HARD_I2C /* I2C with hardware support */
Stefan Roesed0b0dca2010-04-01 14:37:24 +020043#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020044#define CONFIG_SYS_I2C_SLAVE 0x7F
Stefan Roesea8a11a92008-06-06 15:54:31 +020045
46/*
47 * Ethernet/EMAC/PHY
48 */
Ben Warren96e21f82008-10-27 23:50:15 -070049#define CONFIG_PPC4xx_EMAC
Stefan Roesea8a11a92008-06-06 15:54:31 +020050#define CONFIG_MII /* MII PHY management */
51#define CONFIG_NET_MULTI
52#define CONFIG_NETCONSOLE /* include NetConsole support */
53#if defined(CONFIG_440)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020054#define CONFIG_SYS_RX_ETH_BUFFER 32 /* number of eth rx buffers */
Stefan Roesea8a11a92008-06-06 15:54:31 +020055#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020056#define CONFIG_SYS_RX_ETH_BUFFER 16 /* number of eth rx buffers */
Stefan Roesea8a11a92008-06-06 15:54:31 +020057#endif
58
59/*
60 * Commands
61 */
62#include <config_cmd_default.h>
63
64#define CONFIG_CMD_ASKENV
65#if defined(CONFIG_440)
66#define CONFIG_CMD_CACHE
67#endif
68#define CONFIG_CMD_DHCP
69#define CONFIG_CMD_DIAG
70#define CONFIG_CMD_EEPROM
71#define CONFIG_CMD_ELF
72#define CONFIG_CMD_I2C
73#define CONFIG_CMD_IRQ
74#define CONFIG_CMD_MII
75#define CONFIG_CMD_NET
76#define CONFIG_CMD_NFS
77#define CONFIG_CMD_PING
78#define CONFIG_CMD_REGINFO
79
Stefan Roesed8731332009-05-11 13:46:14 +020080#if defined(CONFIG_SYS_RAMBOOT)
81/*
82 * Disable NOR FLASH commands on RAM-booting version. One main reason for this
83 * RAM-booting version is boards with NAND and without NOR. This image can
84 * be used for initial NAND programming.
85 */
86#define CONFIG_SYS_NO_FLASH
87#undef CONFIG_CMD_FLASH
88#undef CONFIG_CMD_IMLS
89#endif
90
Stefan Roesea8a11a92008-06-06 15:54:31 +020091/*
92 * Miscellaneous configurable options
93 */
94#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020095#define CONFIG_SYS_LONGHELP /* undef to save memory */
96#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Stefan Roesea8a11a92008-06-06 15:54:31 +020097#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020098#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
Stefan Roesea8a11a92008-06-06 15:54:31 +020099#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200100#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200101#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200102#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
103#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
104#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200105
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200106#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
107#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200108
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200109#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
110#define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200111
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200112#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200113
114#define CONFIG_CMDLINE_EDITING /* add command line history */
115#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
116#define CONFIG_LOOPW /* enable loopw command */
117#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
118#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
119#define CONFIG_VERSION_VARIABLE /* include version env variable */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200120#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
Stefan Roesea8a11a92008-06-06 15:54:31 +0200121
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200122#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
123#ifdef CONFIG_SYS_HUSH_PARSER
124#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
Stefan Roesea8a11a92008-06-06 15:54:31 +0200125#endif
126
127#define CONFIG_LOADS_ECHO /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200128#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200129
130/*
131 * BOOTP options
132 */
133#define CONFIG_BOOTP_BOOTFILESIZE
134#define CONFIG_BOOTP_BOOTPATH
135#define CONFIG_BOOTP_GATEWAY
136#define CONFIG_BOOTP_HOSTNAME
137#define CONFIG_BOOTP_SUBNETMASK
138
139/*
140 * For booting Linux, the board info and command line data
Stefan Roese6942efc2009-07-28 10:50:32 +0200141 * have to be in the first 16 MB of memory, since this is
142 * the maximum mapped by the 40x Linux kernel during initialization.
Stefan Roesea8a11a92008-06-06 15:54:31 +0200143 */
Stefan Roese6942efc2009-07-28 10:50:32 +0200144#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */
145#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200146
147/*
148 * Internal Definitions
149 */
150#if defined(CONFIG_CMD_KGDB)
151#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
152#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
153#endif
154
155/*
156 * Pass open firmware flat tree
157 */
158#define CONFIG_OF_LIBFDT
159#define CONFIG_OF_BOARD_SETUP
Stefan Roese92b89642009-10-16 10:01:09 +0200160/* Update size in "reg" property of NOR FLASH device tree nodes */
161#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
Stefan Roesea8a11a92008-06-06 15:54:31 +0200162
163/*
164 * Booting and default environment
165 */
166#define CONFIG_PREBOOT "echo;" \
167 "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
168 "echo"
169#define CONFIG_BOOTCOMMAND "run flash_self"
170
171/*
172 * Only very few boards have default console not on ttyS0 (like Taishan)
173 */
174#if !defined(CONFIG_USE_TTY)
175#define CONFIG_USE_TTY ttyS0
176#endif
177
178/*
Adam Grahamf09f09d2008-10-08 10:12:53 -0700179 * Only very few boards have default netdev not set to eth0 (like Arches)
180 */
181#if !defined(CONFIG_USE_NETDEV)
182#define CONFIG_USE_NETDEV eth0
183#endif
184
185/*
Stefan Roesea8a11a92008-06-06 15:54:31 +0200186 * Only some 4xx PPC's are equipped with an FPU
187 */
188#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
189 defined(CONFIG_460EX) || defined(CONFIG_460GT)
190#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
191#else
192#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
193#endif
194
195/*
196 * Only some boards need to extend the bootargs by some additional
197 * parameters (like Makalu)
198 */
199#if !defined(CONFIG_ADDMISC)
200#define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs}\0"
201#endif
202
203#define xstr(s) str(s)
204#define str(s) #s
205
206/*
207 * General common environment variables shared on all AMCC eval boards
208 */
209#define CONFIG_AMCC_DEF_ENV \
Adam Grahamf09f09d2008-10-08 10:12:53 -0700210 "netdev=" xstr(CONFIG_USE_NETDEV) "\0" \
Stefan Roesea8a11a92008-06-06 15:54:31 +0200211 "nfsargs=setenv bootargs root=/dev/nfs rw " \
212 "nfsroot=${serverip}:${rootpath}\0" \
213 "ramargs=setenv bootargs root=/dev/ram rw\0" \
214 "addip=setenv bootargs ${bootargs} " \
215 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
216 ":${hostname}:${netdev}:off panic=1\0" \
217 "addtty=setenv bootargs ${bootargs}" \
218 " console=" xstr(CONFIG_USE_TTY) ",${baudrate}\0" \
219 CONFIG_ADDMISC \
220 "initrd_high=30000000\0" \
Stefan Roese27dd5f82009-07-28 10:56:03 +0200221 "kernel_addr_r=1000000\0" \
222 "fdt_addr_r=1800000\0" \
223 "ramdisk_addr_r=1900000\0" \
Stefan Roesea8a11a92008-06-06 15:54:31 +0200224 "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
225 "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
Adam Grahamf09f09d2008-10-08 10:12:53 -0700226 "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \
Stefan Roesea8a11a92008-06-06 15:54:31 +0200227 CONFIG_AMCC_DEF_ENV_ROOTPATH
228
229/*
230 * Default environment for arch/powerpc booting
231 * for boards that are ported to arch/powerpc
232 */
233#define CONFIG_AMCC_DEF_ENV_POWERPC \
234 "flash_self=run ramargs addip addtty addmisc;" \
235 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
236 "flash_nfs=run nfsargs addip addtty addmisc;" \
237 "bootm ${kernel_addr} - ${fdt_addr}\0" \
238 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
239 "tftp ${fdt_addr_r} ${fdt_file}; " \
240 "run nfsargs addip addtty addmisc;" \
241 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
Adam Grahamf09f09d2008-10-08 10:12:53 -0700242 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
243 "tftp ${fdt_addr_r} ${fdt_file};" \
244 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
245 "net_self=run net_self_load;" \
246 "run ramargs addip addtty addmisc;" \
247 "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
Stefan Roesea8a11a92008-06-06 15:54:31 +0200248 "fdt_file=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0"
249
250/*
251 * Default environment for arch/ppc booting,
252 * for boards that are not ported to arch/powerpc yet
253 */
254#define CONFIG_AMCC_DEF_ENV_PPC \
255 "flash_self=run ramargs addip addtty addmisc;" \
256 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
257 "flash_nfs=run nfsargs addip addtty addmisc;" \
258 "bootm ${kernel_addr}\0" \
259 "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
260 "run nfsargs addip addtty addmisc;" \
261 "bootm ${kernel_addr_r}\0"
262
263/*
264 * Default environment for arch/ppc booting (old version),
265 * for boards that are ported to arch/ppc and arch/powerpc
266 */
267#define CONFIG_AMCC_DEF_ENV_PPC_OLD \
268 "flash_self_old=run ramargs addip addtty addmisc;" \
269 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
270 "flash_nfs_old=run nfsargs addip addtty addmisc;" \
271 "bootm ${kernel_addr}\0" \
272 "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
273 "run nfsargs addip addtty addmisc;" \
274 "bootm ${kernel_addr_r}\0"
275
276#define CONFIG_AMCC_DEF_ENV_NOR_UPD \
Detlev Zundelc8355b92009-09-02 17:24:57 +0200277 "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
278 "load=tftp 200000 ${u-boot}\0" \
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200279 "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
280 "era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
281 "cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize};" \
Stefan Roesea8a11a92008-06-06 15:54:31 +0200282 "setenv filesize;saveenv\0" \
283 "upd=run load update\0" \
284
285#define CONFIG_AMCC_DEF_ENV_NAND_UPD \
Detlev Zundelc8355b92009-09-02 17:24:57 +0200286 "u-boot-nand=" xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0" \
287 "nload=tftp 200000 ${u-boot-nand}\0" \
Stefan Roesea8a11a92008-06-06 15:54:31 +0200288 "nupdate=nand erase 0 100000;nand write 200000 0 100000;" \
289 "setenv filesize;saveenv\0" \
290 "nupd=run nload nupdate\0"
291
292#endif /* __AMCC_COMMON_H */