blob: ca1e89a6f6a48e0ab3957cce19b256286aea5ae0 [file] [log] [blame]
wdenk3a473b22004-01-03 00:43:19 +00001/*
2 * (C) Copyright 2001
3 * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02005 * SPDX-License-Identifier: GPL-2.0+
wdenk3a473b22004-01-03 00:43:19 +00006 */
7
8/*************************************************************************
9 * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
10 *
11 ************************************************************************/
12
13
14/*
15 * mpsc.h - header file for MPSC in uart mode (console driver)
16 */
17
18#ifndef __MPSC_H__
19#define __MPSC_H__
20
21/* include actual Galileo defines */
22#include "../include/mv_gen_reg.h"
23
24/* driver related defines */
25
26int mpsc_init(int baud);
27void mpsc_sdma_init(void);
28void mpsc_init2(void);
29int galbrg_set_baudrate(int channel, int rate);
30
31int mpsc_putchar_early(char ch);
32char mpsc_getchar_debug(void);
33int mpsc_test_char_debug(void);
34
35int mpsc_test_char_sdma(void);
36
37extern int (*mpsc_putchar)(char ch);
38extern char (*mpsc_getchar)(void);
39extern int (*mpsc_test_char)(void);
40
41#define CHANNEL CONFIG_MPSC_PORT
42
43#define TX_DESC 5
44#define RX_DESC 20
45
46#define DESC_FIRST 0x00010000
47#define DESC_LAST 0x00020000
48#define DESC_OWNER_BIT 0x80000000
49
50#define TX_DEMAND 0x00800000
51#define TX_STOP 0x00010000
52#define RX_ENABLE 0x00000080
53
Wolfgang Denk53677ef2008-05-20 16:00:29 +020054#define SDMA_RX_ABORT (1 << 15)
55#define SDMA_TX_ABORT (1 << 31)
56#define MPSC_TX_ABORT (1 << 7)
wdenk3a473b22004-01-03 00:43:19 +000057#define MPSC_RX_ABORT (1 << 23)
58#define MPSC_ENTER_HUNT (1 << 31)
59
60/* MPSC defines */
61
62#define GALMPSC_CONNECT 0x1
63#define GALMPSC_DISCONNECT 0x0
64
65#define GALMPSC_UART 0x1
66
67#define GALMPSC_STOP_BITS_1 0x0
68#define GALMPSC_STOP_BITS_2 0x1
69#define GALMPSC_CHAR_LENGTH_8 0x3
70#define GALMPSC_CHAR_LENGTH_7 0x2
71
72#define GALMPSC_PARITY_ODD 0x0
73#define GALMPSC_PARITY_EVEN 0x2
74#define GALMPSC_PARITY_MARK 0x3
75#define GALMPSC_PARITY_SPACE 0x1
76#define GALMPSC_PARITY_NONE -1
77
78#define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */
79#define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */
80#define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */
81#define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
82#define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */
83#define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */
84#define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */
85
86#define GALMPSC_REG_GAP 0x1000
87
88#define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */
89#define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */
90#define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */
91#define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */
92#define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */
93#define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */
94#define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */
95#define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */
96#define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */
97#define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */
98#define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */
99#define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */
100
101#define GALSDMA_COMMAND_FIRST (1 << 16)
102#define GALSDMA_COMMAND_LAST (1 << 17)
103#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
104#define GALSDMA_COMMAND_AUTO (1 << 30)
105#define GALSDMA_COMMAND_OWNER (1 << 31)
106
107#define GALSDMA_RX 0
108#define GALSDMA_TX 1
109
110/* CHANNEL2 should be CHANNEL1, according to documentation,
111 * but to work with the current GTREGS file...
112 */
113#define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */
114#define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */
115#define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */
116#define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */
117#define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */
118#define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */
119#define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */
120#define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */
121#define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */
122#define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */
123#define GALSDMA_REG_DIFF 0x2000
124
125/* WRONG in gt64260R.h */
126#define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */
127#define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */
128#define GALMPSC_0_INT_CAUSE 0xb804
129#define GALMPSC_0_INT_MASK 0xb884
130
131#define GALSDMA_MODE_UART 0
132#define GALSDMA_MODE_BISYNC 1
133#define GALSDMA_MODE_HDLC 2
134#define GALSDMA_MODE_TRANSPARENT 3
135
136#define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */
137#define GALBRG_REG_GAP 0x0008
138#define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */
139
140#endif /* __MPSC_H__ */