blob: 310d5770dec4889c81389e4765ae21312e109e9c [file] [log] [blame]
Sergey Kubushync74b2102007-08-10 20:26:18 +02001/*
2 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License as
6 * published by the Free Software Foundation; either version 2 of
7 * the License, or (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
17 * MA 02111-1307 USA
18 */
19
20#ifndef __CONFIG_H
21#define __CONFIG_H
Sergey Kubushync74b2102007-08-10 20:26:18 +020022
23/*
24 * Define this to make U-Boot skip low level initialization when loaded
25 * by initial bootloader. Not required by NAND U-Boot version but IS
26 * required for a NOR version used to burn the real NOR U-Boot into
27 * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
28 * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
29 * NOR U-Boot is loaded directly from Flash so it must perform all the
30 * low level initialization itself. NAND version is loaded by an initial
31 * bootloader (UBL in TI-ese) that performs such an initialization so it's
32 * skipped in NAND version. The third DaVinci boot mode loads a bootloader
33 * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
34 * performing low level init prior to loading. All that means we can NOT use
35 * NAND version to put U-Boot into NOR because it doesn't have NOR support and
36 * we can NOT use NOR version because it performs low level initialization
37 * effectively destroying itself in DDR memory. That's why a separate NOR
38 * version with this define is needed. It is loaded via UART, then one uses
39 * it to somehow download a proper NOR version built WITHOUT this define to
40 * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
41 * NOR support into the initial bootloader so it won't be needed but DaVinci
42 * static RAM might be too small for this (I have something like 2Kbytes left
43 * as of now, without NOR support) so this might've not happened...
44 *
45#define CONFIG_NOR_UART_BOOT
46 */
47
48/*=======*/
49/* Board */
50/*=======*/
51#define DV_EVM
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020052#define CONFIG_SYS_NAND_SMALLPAGE
Sandeep Paulrajaac0b4b2010-12-11 10:47:30 -050053#define CONFIG_SYS_USE_NAND
Sergey Kubushync74b2102007-08-10 20:26:18 +020054/*===================*/
55/* SoC Configuration */
56/*===================*/
57#define CONFIG_ARM926EJS /* arm926ejs CPU core */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020058#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
59#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
60#define CONFIG_SYS_HZ 1000
David Brownellf7904362009-05-15 23:44:08 +020061#define CONFIG_SOC_DM644X
Sergey Kubushync74b2102007-08-10 20:26:18 +020062/*====================================================*/
63/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
64/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
65/*====================================================*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020066#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
67#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
68#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
69#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
Sergey Kubushync74b2102007-08-10 20:26:18 +020070/*=============*/
71/* Memory Info */
72/*=============*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020073#define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020074#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */
75#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */
Sergey Kubushync74b2102007-08-10 20:26:18 +020076#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
77#define CONFIG_STACKSIZE (256*1024) /* regular stack */
78#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
79#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
Sandeep Paulrajaac0b4b2010-12-11 10:47:30 -050080
Sergey Kubushync74b2102007-08-10 20:26:18 +020081#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
82/*====================*/
83/* Serial Driver info */
84/*====================*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020085#define CONFIG_SYS_NS16550
86#define CONFIG_SYS_NS16550_SERIAL
David Brownell7ee38c02009-04-12 15:38:06 -070087#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020088#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */
David Brownell7239c5da2009-04-12 15:40:16 -070089#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
Sergey Kubushync74b2102007-08-10 20:26:18 +020090#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
91#define CONFIG_BAUDRATE 115200 /* Default baud rate */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020092#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
Sergey Kubushync74b2102007-08-10 20:26:18 +020093/*===================*/
94/* I2C Configuration */
95/*===================*/
96#define CONFIG_HARD_I2C
97#define CONFIG_DRIVER_DAVINCI_I2C
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020098#define CONFIG_SYS_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
99#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
Sergey Kubushync74b2102007-08-10 20:26:18 +0200100/*==================================*/
101/* Network & Ethernet Configuration */
102/*==================================*/
103#define CONFIG_DRIVER_TI_EMAC
104#define CONFIG_MII
105#define CONFIG_BOOTP_DEFAULT
106#define CONFIG_BOOTP_DNS
107#define CONFIG_BOOTP_DNS2
108#define CONFIG_BOOTP_SEND_HOSTNAME
109#define CONFIG_NET_RETRY_COUNT 10
110/*=====================*/
111/* Flash & Environment */
112/*=====================*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200113#ifdef CONFIG_SYS_USE_NAND
Jean-Christophe PLAGNIOL-VILLARDee4f3e22009-03-30 18:58:39 +0200114#define CONFIG_NAND_DAVINCI
Nick Thompson97f4eb82009-12-12 12:12:26 -0500115#define CONFIG_SYS_NAND_CS 2
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200116#undef CONFIG_ENV_IS_IN_FLASH
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200117#define CONFIG_SYS_NO_FLASH
Jean-Christophe PLAGNIOL-VILLARD51bfee12008-09-10 22:47:58 +0200118#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200119#ifdef CONFIG_SYS_NAND_SMALLPAGE
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200120#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */
Sandeep Paulraja16df2c2009-09-08 17:09:52 -0400121#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
David Brownell269dfea2009-05-15 23:47:13 +0200122#define CONFIG_MTD_PARTITIONS
Sandeep Paulraj5d0f5362009-09-09 15:26:00 -0400123#define CONFIG_MTD_DEVICE
David Brownell269dfea2009-05-15 23:47:13 +0200124#define CONFIG_CMD_MTDPARTS
125#define MTDIDS_DEFAULT \
126 "nand0=davinci_nand.0"
127#define MTDPARTS_DEFAULT \
128 "mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)"
Sergey Kubushync74b2102007-08-10 20:26:18 +0200129#else
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200130#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */
Sandeep Paulraja16df2c2009-09-08 17:09:52 -0400131#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
Sergey Kubushync74b2102007-08-10 20:26:18 +0200132#endif
133#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200134#define CONFIG_SYS_NAND_BASE 0x02000000
David Brownell269dfea2009-05-15 23:47:13 +0200135#define CONFIG_SYS_NAND_USE_FLASH_BBT
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200136#define CONFIG_SYS_NAND_HW_ECC
137#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200138#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200139#elif defined(CONFIG_SYS_USE_NOR)
Sergey Kubushync74b2102007-08-10 20:26:18 +0200140#ifdef CONFIG_NOR_UART_BOOT
141#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
Sergey Kubushync74b2102007-08-10 20:26:18 +0200142#else
143#undef CONFIG_SKIP_LOWLEVEL_INIT
Sergey Kubushync74b2102007-08-10 20:26:18 +0200144#endif
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200145#define CONFIG_ENV_IS_IN_FLASH
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200146#undef CONFIG_SYS_NO_FLASH
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200147#define CONFIG_FLASH_CFI_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200148#define CONFIG_SYS_FLASH_CFI
149#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
150#define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
151#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3)
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200152#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200153#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200154#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200155#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
156#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ /* Env sector Size */
Sergey Kubushync74b2102007-08-10 20:26:18 +0200157#endif
158/*==============================*/
159/* U-Boot general configuration */
160/*==============================*/
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200161#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
Sergey Kubushync74b2102007-08-10 20:26:18 +0200162#define CONFIG_MISC_INIT_R
Wolfgang Denk950a3922008-04-11 15:11:26 +0200163#undef CONFIG_BOOTDELAY
Sergey Kubushync74b2102007-08-10 20:26:18 +0200164#define CONFIG_BOOTFILE "uImage" /* Boot file name */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200165#define CONFIG_SYS_PROMPT "U-Boot > " /* Monitor Command Prompt */
166#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
167#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */
168#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
169#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
170#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
Sergey Kubushync74b2102007-08-10 20:26:18 +0200171#define CONFIG_VERSION_VARIABLE
172#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200173#define CONFIG_SYS_HUSH_PARSER
174#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
Sergey Kubushync74b2102007-08-10 20:26:18 +0200175#define CONFIG_CMDLINE_EDITING
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200176#define CONFIG_SYS_LONGHELP
Sergey Kubushync74b2102007-08-10 20:26:18 +0200177#define CONFIG_CRC32_VERIFY
178#define CONFIG_MX_CYCLIC
Thomas Abraham20cc0662009-01-04 09:41:20 +0530179#define CONFIG_MUSB_HCD
180#define CONFIG_USB_DAVINCI
Sergey Kubushync74b2102007-08-10 20:26:18 +0200181/*===================*/
182/* Linux Information */
183/*===================*/
184#define LINUX_BOOT_PARAM_ADDR 0x80000100
185#define CONFIG_CMDLINE_TAG
186#define CONFIG_SETUP_MEMORY_TAGS
187#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
188#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2050000"
189/*=================*/
190/* U-Boot commands */
191/*=================*/
192#include <config_cmd_default.h>
193#define CONFIG_CMD_ASKENV
194#define CONFIG_CMD_DHCP
195#define CONFIG_CMD_DIAG
196#define CONFIG_CMD_I2C
197#define CONFIG_CMD_MII
198#define CONFIG_CMD_PING
199#define CONFIG_CMD_SAVES
200#define CONFIG_CMD_EEPROM
201#undef CONFIG_CMD_BDI
Hadli, Manjunath8f5d4682012-02-06 00:30:44 +0000202
203#ifdef CONFIG_CMD_BDI
204#define CONFIG_CLOCKS
205#endif
206
Sergey Kubushync74b2102007-08-10 20:26:18 +0200207#undef CONFIG_CMD_FPGA
208#undef CONFIG_CMD_SETGETDCR
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200209#ifdef CONFIG_SYS_USE_NAND
Sergey Kubushync74b2102007-08-10 20:26:18 +0200210#undef CONFIG_CMD_FLASH
211#undef CONFIG_CMD_IMLS
212#define CONFIG_CMD_NAND
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200213#elif defined(CONFIG_SYS_USE_NOR)
Sergey Kubushync74b2102007-08-10 20:26:18 +0200214#define CONFIG_CMD_JFFS2
215#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200216#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!"
Sergey Kubushync74b2102007-08-10 20:26:18 +0200217#endif
Thomas Abraham20cc0662009-01-04 09:41:20 +0530218/*==========================*/
219/* USB MSC support (if any) */
220/*==========================*/
221#ifdef CONFIG_USB_DAVINCI
222#define CONFIG_CMD_USB
223#ifdef CONFIG_MUSB_HCD
224#define CONFIG_USB_STORAGE
225#define CONFIG_CMD_STORAGE
226#define CONFIG_CMD_FAT
227#define CONFIG_DOS_PARTITION
228#endif
229#ifdef CONFIG_USB_KEYBOARD
230#define CONFIG_SYS_USB_EVENT_POLL
231#define CONFIG_PREBOOT "usb start"
232#endif
233#endif
Sandeep Paulrajaac0b4b2010-12-11 10:47:30 -0500234
235#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
236
237#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
238#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
239#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
240 CONFIG_SYS_INIT_RAM_SIZE - \
241 GENERATED_GBL_DATA_SIZE)
242
Sergey Kubushync74b2102007-08-10 20:26:18 +0200243#endif /* __CONFIG_H */