| Stefan Agner | 24d4d42 | 2014-08-05 23:27:30 +0200 | [diff] [blame^] | 1 | /dts-v1/; |
| 2 | |
| 3 | #include "tegra30.dtsi" |
| 4 | |
| 5 | / { |
| 6 | model = "Toradex Colibri T30"; |
| 7 | compatible = "toradex,colibri_t30", "nvidia,tegra30"; |
| 8 | |
| 9 | aliases { |
| 10 | i2c0 = "/i2c@7000d000"; |
| 11 | i2c1 = "/i2c@7000c000"; |
| 12 | i2c2 = "/i2c@7000c700"; |
| 13 | sdhci0 = "/sdhci@78000600"; |
| 14 | sdhci1 = "/sdhci@78000200"; |
| 15 | usb0 = "/usb@7d000000"; |
| 16 | usb1 = "/usb@7d004000"; /* on module only, for ASIX */ |
| 17 | usb2 = "/usb@7d008000"; |
| 18 | }; |
| 19 | |
| 20 | memory { |
| 21 | device_type = "memory"; |
| 22 | reg = <0x80000000 0x40000000>; |
| 23 | }; |
| 24 | |
| 25 | /* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier |
| 26 | board) */ |
| 27 | i2c@7000c000 { |
| 28 | status = "okay"; |
| 29 | clock-frequency = <100000>; |
| 30 | }; |
| 31 | |
| 32 | /* GEN2_I2C: unused */ |
| 33 | |
| 34 | /* CAM_I2C: unused */ |
| 35 | |
| 36 | /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ |
| 37 | i2c@7000c700 { |
| 38 | status = "okay"; |
| 39 | clock-frequency = <100000>; |
| 40 | }; |
| 41 | |
| 42 | /* PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and |
| 43 | touch screen controller */ |
| 44 | i2c@7000d000 { |
| 45 | status = "okay"; |
| 46 | clock-frequency = <100000>; |
| 47 | }; |
| 48 | |
| 49 | /* SPI1: Colibri SSP */ |
| 50 | spi@7000d400 { |
| 51 | status = "okay"; |
| 52 | spi-max-frequency = <25000000>; |
| 53 | }; |
| 54 | |
| 55 | sdhci@78000200 { |
| 56 | status = "okay"; |
| 57 | bus-width = <4>; |
| 58 | cd-gpios = <&gpio 23 1>; /* PC7, MMCD */ |
| 59 | }; |
| 60 | |
| 61 | sdhci@78000600 { |
| 62 | status = "okay"; |
| 63 | bus-width = <8>; |
| 64 | non-removable; |
| 65 | }; |
| 66 | |
| 67 | /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ |
| 68 | usb@7d000000 { |
| 69 | status = "okay"; |
| 70 | dr_mode = "peripheral"; |
| 71 | }; |
| 72 | |
| 73 | /* EHCI instance 1: USB2_DP/N -> AX88772B */ |
| 74 | usb@7d004000 { |
| 75 | status = "okay"; |
| 76 | phy_type = "utmi"; |
| 77 | nvidia,vbus-gpio = <&gpio 234 0>; /* PDD2, VBUS_LAN */ |
| 78 | }; |
| 79 | |
| 80 | /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ |
| 81 | usb@7d008000 { |
| 82 | status = "okay"; |
| 83 | nvidia,vbus-gpio = <&gpio 178 1>; /* PW2, USBH_PEN */ |
| 84 | }; |
| 85 | }; |