blob: 7c94644de85ecf070304396e7e1b4947977f64cf [file] [log] [blame]
Heiko Schocherc0dcece2013-08-19 16:39:01 +02001/*
2 * siemens rut
3 * (C) Copyright 2013 Siemens Schweiz AG
4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5 *
6 * Based on:
7 * U-Boot file:/include/configs/am335x_evm.h
8 *
9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10 *
11 * SPDX-License-Identifier: GPL-2.0+
12 */
13
14#ifndef __CONFIG_RUT_H
15#define __CONFIG_RUT_H
16
17#define CONFIG_SIEMENS_RUT
18#define MACH_TYPE_RUT 4316
19#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_RUT
20
21#include "siemens-am33x-common.h"
22
23#define CONFIG_SYS_MPUCLK 600
24#define RUT_IOCTRL_VAL 0x18b
25#define DDR_PLL_FREQ 303
26
27 /* Physical Memory Map */
28#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MiB */
29
30/* I2C Configuration */
31#define CONFIG_SYS_I2C_SPEED 100000
32
33#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
34#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
35#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */
36#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */
37
38#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200
39
40#undef CONFIG_SPL_NET_SUPPORT
41#undef CONFIG_SPL_NET_VCI_STRING
42#undef CONFIG_SPL_ETH_SUPPORT
43
44#define CONFIG_PHY_ADDR 1
45#define CONFIG_PHY_NATSEMI
46
47#define CONFIG_FACTORYSET
48
49/* UBI Support */
50#ifndef CONFIG_SPL_BUILD
51#define CONFIG_CMD_MTDPARTS
52#define CONFIG_MTD_PARTITIONS
53#define CONFIG_MTD_DEVICE
54#define CONFIG_RBTREE
55#define CONFIG_LZO
56#define CONFIG_CMD_UBI
57#define CONFIG_CMD_UBIFS
58#endif
59
60/* Watchdog */
61#define WATCHDOG_TRIGGER_GPIO 14
62
63#ifndef CONFIG_SPL_BUILD
64
65/* Default env settings */
66#define CONFIG_EXTRA_ENV_SETTINGS \
67 "hostname=rut\0" \
68 "splashpos=488,352\0" \
69 "optargs=fixrtc --no-log consoleblank=0 \0" \
70 CONFIG_COMMON_ENV_SETTINGS \
71 "mmc_dev=0\0" \
72 "mmc_root=/dev/mmcblk0p2 rw\0" \
73 "mmc_root_fs_type=ext4 rootwait\0" \
74 "mmc_load_uimage=" \
75 "mmc rescan; " \
76 "setenv bootfile uImage;" \
77 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
78 "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
79 "importbootenv=echo Importing environment from mmc ...; " \
80 "env import -t $loadaddr $filesize\0" \
81 "mmc_args=run bootargs_defaults;" \
82 "mtdparts default;" \
83 "setenv bootargs ${bootargs} " \
84 "root=${mmc_root} ${mtdparts}" \
85 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
86 "eth=${ethaddr} " \
87 "\0" \
88 "mmc_boot=run mmc_args; " \
89 "run mmc_load_uimage; " \
90 "bootm ${kloadaddr}\0" \
91 ""
92
93#ifndef CONFIG_RESTORE_FLASH
94/* set to negative value for no autoboot */
95#define CONFIG_BOOTDELAY 3
96
97#define CONFIG_BOOTCOMMAND \
98 "if mmc rescan; then " \
99 "echo SD/MMC found on device ${mmc_dev};" \
100 "if run loadbootenv; then " \
101 "echo Loaded environment from ${bootenv};" \
102 "run importbootenv;" \
103 "fi;" \
104 "if test -n $uenvcmd; then " \
105 "echo Running uenvcmd ...;" \
106 "run uenvcmd;" \
107 "fi;" \
108 "if run mmc_load_uimage; then " \
109 "run mmc_args;" \
110 "bootm ${kloadaddr};" \
111 "fi;" \
112 "fi;" \
113 "run nand_boot;" \
114 "if ping ${serverip}; then " \
115 "run net_nfs; " \
116 "fi; "
117
118#else
119#define CONFIG_BOOTDELAY 0
120
121#define CONFIG_BOOTCOMMAND \
122 "setenv autoload no; " \
123 "dhcp; " \
124 "if tftp 80000000 debrick.scr; then " \
125 "source 80000000; " \
126 "fi"
127#endif
128
129#endif /* CONFIG_SPL_BUILD */
130
131#ifdef CONFIG_SPL_BUILD
132#undef CONFIG_HW_WATCHDOG
133#endif
134
135#define CONFIG_VIDEO
136#if defined(CONFIG_VIDEO)
137#define CONFIG_VIDEO_DA8XX
138#define CONFIG_CFB_CONSOLE
139#define CONFIG_VGA_AS_SINGLE_DEVICE
140#define CONFIG_SPLASH_SCREEN
141#define CONFIG_SPLASH_SCREEN_ALIGN
142#define CONFIG_VIDEO_LOGO
143#define CONFIG_VIDEO_BMP_RLE8
144#define CONFIG_VIDEO_BMP_LOGO
145#define CONFIG_CMD_BMP
146#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE
147
148#define CONFIG_SPI
149#define CONFIG_OMAP3_SPI
150
151#define BOARD_LCD_RESET 115 /* Bank 3 pin 19 */
152#define CONFIG_ARCH_EARLY_INIT_R
153#define CONFIG_FORMIKE
154#endif
155
156#endif /* ! __CONFIG_RUT_H */