Andy Yan | bae2f28 | 2017-06-01 18:00:36 +0800 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2016 Rockchip Electronics Co., Ltd |
| 3 | * Author: Andy Yan <andy.yan@rock-chips.com> |
| 4 | * SPDX-License-Identifier: GPL-2.0 |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
David Wu | 2e4ce50 | 2017-09-20 14:28:18 +0800 | [diff] [blame^] | 8 | #include <bitfield.h> |
Andy Yan | bae2f28 | 2017-06-01 18:00:36 +0800 | [diff] [blame] | 9 | #include <clk-uclass.h> |
| 10 | #include <dm.h> |
| 11 | #include <errno.h> |
| 12 | #include <syscon.h> |
| 13 | #include <asm/io.h> |
| 14 | #include <asm/arch/clock.h> |
| 15 | #include <asm/arch/cru_rv1108.h> |
| 16 | #include <asm/arch/hardware.h> |
| 17 | #include <dm/lists.h> |
| 18 | #include <dt-bindings/clock/rv1108-cru.h> |
| 19 | |
| 20 | DECLARE_GLOBAL_DATA_PTR; |
| 21 | |
| 22 | enum { |
| 23 | VCO_MAX_HZ = 2400U * 1000000, |
| 24 | VCO_MIN_HZ = 600 * 1000000, |
| 25 | OUTPUT_MAX_HZ = 2400U * 1000000, |
| 26 | OUTPUT_MIN_HZ = 24 * 1000000, |
| 27 | }; |
| 28 | |
Andy Yan | bae2f28 | 2017-06-01 18:00:36 +0800 | [diff] [blame] | 29 | #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) |
| 30 | |
| 31 | #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\ |
| 32 | .refdiv = _refdiv,\ |
| 33 | .fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\ |
| 34 | .postdiv1 = _postdiv1, .postdiv2 = _postdiv2};\ |
| 35 | _Static_assert(((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ) *\ |
| 36 | OSC_HZ / (_refdiv * _postdiv1 * _postdiv2) == hz,\ |
| 37 | #hz "Hz cannot be hit with PLL "\ |
| 38 | "divisors on line " __stringify(__LINE__)); |
| 39 | |
David Wu | 2e4ce50 | 2017-09-20 14:28:18 +0800 | [diff] [blame^] | 40 | /* use integer mode */ |
Andy Yan | bae2f28 | 2017-06-01 18:00:36 +0800 | [diff] [blame] | 41 | static inline int rv1108_pll_id(enum rk_clk_id clk_id) |
| 42 | { |
| 43 | int id = 0; |
| 44 | |
| 45 | switch (clk_id) { |
| 46 | case CLK_ARM: |
| 47 | case CLK_DDR: |
| 48 | id = clk_id - 1; |
| 49 | break; |
| 50 | case CLK_GENERAL: |
| 51 | id = 2; |
| 52 | break; |
| 53 | default: |
| 54 | printf("invalid pll id:%d\n", clk_id); |
| 55 | id = -1; |
| 56 | break; |
| 57 | } |
| 58 | |
| 59 | return id; |
| 60 | } |
| 61 | |
| 62 | static uint32_t rkclk_pll_get_rate(struct rv1108_cru *cru, |
| 63 | enum rk_clk_id clk_id) |
| 64 | { |
| 65 | uint32_t refdiv, fbdiv, postdiv1, postdiv2; |
| 66 | uint32_t con0, con1, con3; |
| 67 | int pll_id = rv1108_pll_id(clk_id); |
| 68 | struct rv1108_pll *pll = &cru->pll[pll_id]; |
| 69 | uint32_t freq; |
| 70 | |
| 71 | con3 = readl(&pll->con3); |
| 72 | |
| 73 | if (con3 & WORK_MODE_MASK) { |
| 74 | con0 = readl(&pll->con0); |
| 75 | con1 = readl(&pll->con1); |
| 76 | fbdiv = (con0 >> FBDIV_SHIFT) & FBDIV_MASK; |
| 77 | postdiv1 = (con1 & POSTDIV1_MASK) >> POSTDIV1_SHIFT; |
| 78 | postdiv2 = (con1 & POSTDIV2_MASK) >> POSTDIV2_SHIFT; |
| 79 | refdiv = (con1 & REFDIV_MASK) >> REFDIV_SHIFT; |
| 80 | freq = (24 * fbdiv / (refdiv * postdiv1 * postdiv2)) * 1000000; |
| 81 | } else { |
| 82 | freq = OSC_HZ; |
| 83 | } |
| 84 | |
| 85 | return freq; |
| 86 | } |
| 87 | |
| 88 | static int rv1108_mac_set_clk(struct rv1108_cru *cru, ulong rate) |
| 89 | { |
| 90 | uint32_t con = readl(&cru->clksel_con[24]); |
| 91 | ulong pll_rate; |
| 92 | uint8_t div; |
| 93 | |
| 94 | if ((con >> MAC_PLL_SEL_SHIFT) & MAC_PLL_SEL_GPLL) |
| 95 | pll_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| 96 | else |
| 97 | pll_rate = rkclk_pll_get_rate(cru, CLK_ARM); |
| 98 | |
| 99 | /*default set 50MHZ for gmac*/ |
| 100 | if (!rate) |
| 101 | rate = 50000000; |
| 102 | |
| 103 | div = DIV_ROUND_UP(pll_rate, rate) - 1; |
| 104 | if (div <= 0x1f) |
| 105 | rk_clrsetreg(&cru->clksel_con[24], MAC_CLK_DIV_MASK, |
| 106 | div << MAC_CLK_DIV_SHIFT); |
| 107 | else |
| 108 | debug("Unsupported div for gmac:%d\n", div); |
| 109 | |
| 110 | return DIV_TO_RATE(pll_rate, div); |
| 111 | } |
| 112 | |
| 113 | static int rv1108_sfc_set_clk(struct rv1108_cru *cru, uint rate) |
| 114 | { |
| 115 | u32 con = readl(&cru->clksel_con[27]); |
| 116 | u32 pll_rate; |
| 117 | u32 div; |
| 118 | |
| 119 | if ((con >> SFC_PLL_SEL_SHIFT) && SFC_PLL_SEL_GPLL) |
| 120 | pll_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| 121 | else |
| 122 | pll_rate = rkclk_pll_get_rate(cru, CLK_DDR); |
| 123 | |
| 124 | div = DIV_ROUND_UP(pll_rate, rate) - 1; |
| 125 | if (div <= 0x3f) |
| 126 | rk_clrsetreg(&cru->clksel_con[27], SFC_CLK_DIV_MASK, |
| 127 | div << SFC_CLK_DIV_SHIFT); |
| 128 | else |
| 129 | debug("Unsupported sfc clk rate:%d\n", rate); |
| 130 | |
| 131 | return DIV_TO_RATE(pll_rate, div); |
| 132 | } |
| 133 | |
David Wu | 2e4ce50 | 2017-09-20 14:28:18 +0800 | [diff] [blame^] | 134 | static ulong rv1108_saradc_get_clk(struct rv1108_cru *cru) |
| 135 | { |
| 136 | u32 div, val; |
| 137 | |
| 138 | val = readl(&cru->clksel_con[22]); |
| 139 | div = bitfield_extract(val, CLK_SARADC_DIV_CON_SHIFT, |
| 140 | CLK_SARADC_DIV_CON_WIDTH); |
| 141 | |
| 142 | return DIV_TO_RATE(OSC_HZ, div); |
| 143 | } |
| 144 | |
| 145 | static ulong rv1108_saradc_set_clk(struct rv1108_cru *cru, uint hz) |
| 146 | { |
| 147 | int src_clk_div; |
| 148 | |
| 149 | src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1; |
| 150 | assert(src_clk_div < 128); |
| 151 | |
| 152 | rk_clrsetreg(&cru->clksel_con[22], |
| 153 | CLK_SARADC_DIV_CON_MASK, |
| 154 | src_clk_div << CLK_SARADC_DIV_CON_SHIFT); |
| 155 | |
| 156 | return rv1108_saradc_get_clk(cru); |
| 157 | } |
| 158 | |
Andy Yan | bae2f28 | 2017-06-01 18:00:36 +0800 | [diff] [blame] | 159 | static ulong rv1108_clk_get_rate(struct clk *clk) |
| 160 | { |
| 161 | struct rv1108_clk_priv *priv = dev_get_priv(clk->dev); |
| 162 | |
| 163 | switch (clk->id) { |
| 164 | case 0 ... 63: |
| 165 | return rkclk_pll_get_rate(priv->cru, clk->id); |
David Wu | 2e4ce50 | 2017-09-20 14:28:18 +0800 | [diff] [blame^] | 166 | case SCLK_SARADC: |
| 167 | return rv1108_saradc_get_clk(priv->cru); |
Andy Yan | bae2f28 | 2017-06-01 18:00:36 +0800 | [diff] [blame] | 168 | default: |
| 169 | return -ENOENT; |
| 170 | } |
| 171 | } |
| 172 | |
| 173 | static ulong rv1108_clk_set_rate(struct clk *clk, ulong rate) |
| 174 | { |
| 175 | struct rv1108_clk_priv *priv = dev_get_priv(clk->dev); |
| 176 | ulong new_rate; |
| 177 | |
| 178 | switch (clk->id) { |
| 179 | case SCLK_MAC: |
| 180 | new_rate = rv1108_mac_set_clk(priv->cru, rate); |
| 181 | break; |
| 182 | case SCLK_SFC: |
| 183 | new_rate = rv1108_sfc_set_clk(priv->cru, rate); |
| 184 | break; |
David Wu | 2e4ce50 | 2017-09-20 14:28:18 +0800 | [diff] [blame^] | 185 | case SCLK_SARADC: |
| 186 | new_rate = rv1108_saradc_set_clk(priv->cru, rate); |
| 187 | break; |
Andy Yan | bae2f28 | 2017-06-01 18:00:36 +0800 | [diff] [blame] | 188 | default: |
| 189 | return -ENOENT; |
| 190 | } |
| 191 | |
| 192 | return new_rate; |
| 193 | } |
| 194 | |
| 195 | static const struct clk_ops rv1108_clk_ops = { |
| 196 | .get_rate = rv1108_clk_get_rate, |
| 197 | .set_rate = rv1108_clk_set_rate, |
| 198 | }; |
| 199 | |
| 200 | static void rkclk_init(struct rv1108_cru *cru) |
| 201 | { |
| 202 | unsigned int apll = rkclk_pll_get_rate(cru, CLK_ARM); |
| 203 | unsigned int dpll = rkclk_pll_get_rate(cru, CLK_DDR); |
| 204 | unsigned int gpll = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| 205 | |
| 206 | rk_clrsetreg(&cru->clksel_con[0], CORE_CLK_DIV_MASK, |
| 207 | 0 << MAC_CLK_DIV_SHIFT); |
| 208 | |
| 209 | printf("APLL: %d DPLL:%d GPLL:%d\n", apll, dpll, gpll); |
| 210 | } |
| 211 | |
| 212 | static int rv1108_clk_probe(struct udevice *dev) |
| 213 | { |
| 214 | struct rv1108_clk_priv *priv = dev_get_priv(dev); |
| 215 | |
| 216 | priv->cru = (struct rv1108_cru *)devfdt_get_addr(dev); |
| 217 | |
| 218 | rkclk_init(priv->cru); |
| 219 | |
| 220 | return 0; |
| 221 | } |
| 222 | |
| 223 | static int rv1108_clk_bind(struct udevice *dev) |
| 224 | { |
| 225 | int ret; |
| 226 | |
| 227 | /* The reset driver does not have a device node, so bind it here */ |
| 228 | ret = device_bind_driver(gd->dm_root, "rv1108_sysreset", "reset", &dev); |
| 229 | if (ret) |
| 230 | error("No Rv1108 reset driver: ret=%d\n", ret); |
| 231 | |
| 232 | return 0; |
| 233 | } |
| 234 | |
| 235 | static const struct udevice_id rv1108_clk_ids[] = { |
| 236 | { .compatible = "rockchip,rv1108-cru" }, |
| 237 | { } |
| 238 | }; |
| 239 | |
| 240 | U_BOOT_DRIVER(clk_rv1108) = { |
| 241 | .name = "clk_rv1108", |
| 242 | .id = UCLASS_CLK, |
| 243 | .of_match = rv1108_clk_ids, |
| 244 | .priv_auto_alloc_size = sizeof(struct rv1108_clk_priv), |
| 245 | .ops = &rv1108_clk_ops, |
| 246 | .bind = rv1108_clk_bind, |
| 247 | .probe = rv1108_clk_probe, |
| 248 | }; |