Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 2f15278c2eb911c668b4fe562130b78cf554d139 / . / include / configs / ADNPESC1.h
blob: 2efca1056e927b102e5cc5ccdd59e785fffeddb6 [file] [log] [blame]
wdenkaaf224a2004-03-14 15:20:55 +0000[diff] [blame]1/*
2 * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
3 * Stephan Linz <linz@li-pro.net>
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#ifndef __CONFIG_H
25#define __CONFIG_H
26
27/***********************************************************************
28 * Include the whole NIOS CPU configuration.
29 *
30 * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
31 *
32 ***********************************************************************/
33
34#if defined(CONFIG_NIOS_BASE_32)
35#include <configs/ADNPESC1_base_32.h>
36#else
37#error *** CFG_ERROR: you have to setup right NIOS CPU configuration
38#endif
39
40/*------------------------------------------------------------------------
41 * BOARD/CPU -- TOP-LEVEL
42 *----------------------------------------------------------------------*/
43#define CONFIG_NIOS 1 /* NIOS-32 core */
44#define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */
45#define CONFIG_SYS_CLK_FREQ CFG_NIOS_CPU_CLK/* 50 MHz core clock */
46#define CFG_HZ 1000 /* 1 msec time tick */
47#undef CFG_CLKS_IN_HZ
48#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
49
50/*------------------------------------------------------------------------
51 * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
52 *----------------------------------------------------------------------*/
53#if (CFG_NIOS_CPU_SDRAM_SIZE != 0)
54
55#define CFG_SDRAM_BASE CFG_NIOS_CPU_SDRAM_BASE
56#define CFG_SDRAM_SIZE CFG_NIOS_CPU_SDRAM_SIZE
57
58#else
59#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config
60#endif
61
62#if defined(CFG_NIOS_CPU_SRAM_BASE) && defined(CFG_NIOS_CPU_SRAM_SIZE)
63
64#define CFG_SRAM_BASE CFG_NIOS_CPU_SRAM_BASE
65#define CFG_SRAM_SIZE CFG_NIOS_CPU_SRAM_SIZE
66
67#else
68
69#undef CFG_SRAM_BASE
70#undef CFG_SRAM_SIZE
71
72#endif
73
74#define CFG_VECT_BASE CFG_NIOS_CPU_VEC_BASE
75
76/*------------------------------------------------------------------------
77 * MEMORY ORGANIZATION - For the most part, you can put things pretty
78 * much anywhere. This is pretty flexible for Nios. So here we make some
79 * arbitrary choices & assume that the monitor is placed at the end of
80 * a memory resource (so you must make sure TEXT_BASE is chosen
81 * appropriately -- this is very important if you plan to move your
82 * memory to another place as configured at this time !!!).
83 *
84 * -The heap is placed below the monitor.
85 * -Global data is placed below the heap.
86 * -The stack is placed below global data (&grows down).
87 *----------------------------------------------------------------------*/
88#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */
89#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
90#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
91
92#define CFG_MONITOR_BASE TEXT_BASE
93#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
94#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
95#define CFG_INIT_SP CFG_GBL_DATA_OFFSET
96
97/*------------------------------------------------------------------------
98 * FLASH (AM29LV065D)
99 *----------------------------------------------------------------------*/
100#if (CFG_NIOS_CPU_FLASH_SIZE != 0)
101
102#define CFG_FLASH_BASE CFG_NIOS_CPU_FLASH_BASE
103#define CFG_FLASH_SIZE CFG_NIOS_CPU_FLASH_SIZE
104#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */
105#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */
106#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
107#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
108#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size */
109
110#else
111#error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config
112#endif
113
114/*------------------------------------------------------------------------
115 * ENVIRONMENT
116 *----------------------------------------------------------------------*/
117#if (CFG_NIOS_CPU_FLASH_SIZE != 0)
118
119#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */
120
121/* Mem addr of environment */
122#if defined(CONFIG_NIOS_BASE_32)
123#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
124#else
125#error *** CFG_ERROR: you have to setup the environment base address CFG_ENV_ADDR
126#endif
127
128#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
129#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
130
131#else
132#define CFG_ENV_IS_NOWHERE 1 /* NO Environment */
133#endif
134
135/*------------------------------------------------------------------------
136 * NIOS APPLICATION CODE BASE AREA
137 *----------------------------------------------------------------------*/
138#if ((CFG_ENV_ADDR + CFG_ENV_SIZE) == 0x1050000)
139#define CFG_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100"
140#define CFG_ADNPESC1_NIOS_APPL_ENTRY "0x1050000"
141#define CFG_ADNPESC1_NIOS_APPL_IDENT "0x105000c"
142#define CFG_ADNPESC1_NIOS_APPL_END "0x11fffff"
143#define CFG_ADNPESC1_FILESYSTEM_BASE "0x1200000"
144#define CFG_ADNPESC1_FILESYSTEM_END "0x17fffff"
145#else
146#error *** CFG_ERROR: missing right appl.code base configuration, expand your config.h
147#endif
148#define CFG_ADNPESC1_NIOS_IDENTIFIER "Nios"
149
150/*------------------------------------------------------------------------
151 * BOOT ENVIRONMENT
152 *----------------------------------------------------------------------*/
153#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
154#define CFG_ADNPESC1_SLED_BOOT_OFF "sled boot off; "
155#define CFG_ADNPESC1_SLED_RED_BLINK "sled red blink; "
156#else
157#define CFG_ADNPESC1_SLED_BOOT_OFF
158#define CFG_ADNPESC1_SLED_RED_BLINK
159#endif
160
161#define CONFIG_BOOTDELAY 5
162#define CONFIG_BOOTCOMMAND \
163 "if itest.s *$appl_ident_addr == \"$appl_ident_str\"; " \
164 "then " \
165 "wd off; " \
166 CFG_ADNPESC1_SLED_BOOT_OFF \
167 "go $appl_entry_addr; " \
168 "else " \
169 CFG_ADNPESC1_SLED_RED_BLINK \
170 "echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\
171 "echo *** invalid application at $appl_entry_addr; " \
172 "echo *** stop bootup...; " \
173 "fi"
174
175/*------------------------------------------------------------------------
176 * EXTRA ENVIRONMENT
177 *----------------------------------------------------------------------*/
178#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
179#define CFG_ADNPESC1_SLED_YELLO_ON "sled yellow on; "
180#define CFG_ADNPESC1_SLED_YELLO_OFF "sled yellow off; "
181#else
182#define CFG_ADNPESC1_SLED_YELLO_ON
183#define CFG_ADNPESC1_SLED_YELLO_OFF
184#endif
185
186#define CONFIG_EXTRA_ENV_SETTINGS \
187 "update_allowed=0\0" \
188 "update_load_addr=" CFG_ADNPESC1_UPDATE_LOAD_ADDR "\0" \
189 "appl_entry_addr=" CFG_ADNPESC1_NIOS_APPL_ENTRY "\0" \
190 "appl_end_addr=" CFG_ADNPESC1_NIOS_APPL_END "\0" \
191 "appl_ident_addr=" CFG_ADNPESC1_NIOS_APPL_IDENT "\0" \
192 "appl_ident_str=" CFG_ADNPESC1_NIOS_IDENTIFIER "\0" \
193 "appl_name=ADNPESC1/base32/linux.bin\0" \
194 "appl_update=" \
195 "if itest.b $update_allowed != 0; " \
196 "then " \
197 CFG_ADNPESC1_SLED_YELLO_ON \
198 "tftp $update_load_addr $appl_name; " \
199 "protect off $appl_entry_addr $appl_end_addr; " \
200 "era $appl_entry_addr $appl_end_addr; " \
201 "cp.b $update_load_addr $appl_entry_addr $filesize; "\
202 CFG_ADNPESC1_SLED_YELLO_OFF \
203 "else " \
204 "echo *** update not allowed (update_allowed=$update_allowed); "\
205 "fi\0" \
206 "fs_base_addr=" CFG_ADNPESC1_FILESYSTEM_BASE "\0" \
207 "fs_end_addr=" CFG_ADNPESC1_FILESYSTEM_END "\0" \
208 "fs_name=ADNPESC1/base32/romfs.img\0" \
209 "fs_update=" \
210 "if itest.b $update_allowed != 0; " \
211 "then " \
212 CFG_ADNPESC1_SLED_YELLO_ON \
213 "tftp $update_load_addr $fs_name; " \
214 "protect off $fs_base_addr $fs_end_addr; " \
215 "era $fs_base_addr $fs_end_addr; " \
216 "cp.b $update_load_addr $fs_base_addr $filesize; "\
217 CFG_ADNPESC1_SLED_YELLO_OFF \
218 "else " \
219 "echo *** update not allowed (update_allowed=$update_allowed); "\
220 "fi\0" \
221 "uboot_name=ADNPESC1/base32/u-boot.bin\0" \
222 "uboot_loadnrun=" \
223 "if ping $serverip; " \
224 "then " \
225 CFG_ADNPESC1_SLED_YELLO_ON \
226 "tftp $update_load_addr $uboot_name; " \
227 "wd off; " \
228 "go $update_load_addr; " \
229 "else " \
230 "echo *** missing connection to $serverip; " \
231 "echo *** check your network and try again...; "\
232 "fi\0"
233
234/*------------------------------------------------------------------------
235 * CONSOLE
236 *----------------------------------------------------------------------*/
237#if (CFG_NIOS_CPU_UART_NUMS != 0)
238
239#define CFG_NIOS_CONSOLE CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */
240
241#if (CFG_NIOS_CPU_UART0_BR != 0)
242#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
243#define CONFIG_BAUDRATE CFG_NIOS_CPU_UART0_BR
244#else
245#undef CFG_NIOS_FIXEDBAUD
246#define CONFIG_BAUDRATE 115200
247#endif
248
249#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
250
251#else
252#error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config
253#endif
254
255/*------------------------------------------------------------------------
256 * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
257 * so an avalon bus timer is required.
258 *----------------------------------------------------------------------*/
259#if (CFG_NIOS_CPU_TIMER_NUMS != 0) && defined(CFG_NIOS_CPU_TICK_TIMER)
260
261#if (CFG_NIOS_CPU_TICK_TIMER == 0)
262
263#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */
264#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ
265
266#if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
267
268#if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
269#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
270#else
271#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
272#endif
273
274#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
275
276#elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */
277
278#if (CFG_HZ <= 1000)
279#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
280#else
281#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
282#endif
283
284#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
285
286#else
287#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct
288#endif
289
290#elif (CFG_NIOS_CPU_TICK_TIMER == 1)
291
292#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */
293#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ
294
295#if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
296
297#if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
298#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
299#else
300#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
301#endif
302
303#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
304
305#elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */
306
307#if (CFG_HZ <= 1000)
308#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
309#else
310#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
311#endif
312
313#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
314
315#else
316#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct
317#endif
318
319#endif /* CFG_NIOS_CPU_TICK_TIMER */
320
321#else
322#error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config
323#endif
324
325/*------------------------------------------------------------------------
326 * WATCHDOG (or better MAX823 supervisory circuite access)
327 *----------------------------------------------------------------------*/
328#define CONFIG_HW_WATCHDOG 1 /* board specific WD */
329
330#ifdef CONFIG_HW_WATCHDOG
331
332/* MAX823 supervisor -- watchdog enable port at: */
333#if (CFG_NIOS_CPU_WDENA_PIO == 0)
334#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO0 /* PIO0 */
335#elif (CFG_NIOS_CPU_WDENA_PIO == 1)
336#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO1 /* PIO1 */
337#elif (CFG_NIOS_CPU_WDENA_PIO == 2)
338#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO2 /* PIO2 */
339#elif (CFG_NIOS_CPU_WDENA_PIO == 3)
340#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO3 /* PIO3 */
341#elif (CFG_NIOS_CPU_WDENA_PIO == 4)
342#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO4 /* PIO4 */
343#elif (CFG_NIOS_CPU_WDENA_PIO == 5)
344#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO5 /* PIO5 */
345#elif (CFG_NIOS_CPU_WDENA_PIO == 6)
346#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO6 /* PIO6 */
347#elif (CFG_NIOS_CPU_WDENA_PIO == 7)
348#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO7 /* PIO7 */
349#elif (CFG_NIOS_CPU_WDENA_PIO == 8)
350#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO8 /* PIO8 */
351#elif (CFG_NIOS_CPU_WDENA_PIO == 9)
352#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO9 /* PIO9 */
353#else
354#error *** CFG_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
355#endif
356
357/* MAX823 supervisor -- watchdog trigger port at: */
358#if (CFG_NIOS_CPU_WDTOG_PIO == 0)
359#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO0 /* PIO0 */
360#elif (CFG_NIOS_CPU_WDTOG_PIO == 1)
361#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO1 /* PIO1 */
362#elif (CFG_NIOS_CPU_WDTOG_PIO == 2)
363#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO2 /* PIO2 */
364#elif (CFG_NIOS_CPU_WDTOG_PIO == 3)
365#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO3 /* PIO3 */
366#elif (CFG_NIOS_CPU_WDTOG_PIO == 4)
367#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO4 /* PIO4 */
368#elif (CFG_NIOS_CPU_WDTOG_PIO == 5)
369#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO5 /* PIO5 */
370#elif (CFG_NIOS_CPU_WDTOG_PIO == 6)
371#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO6 /* PIO6 */
372#elif (CFG_NIOS_CPU_WDTOG_PIO == 7)
373#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO7 /* PIO7 */
374#elif (CFG_NIOS_CPU_WDTOG_PIO == 8)
375#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO8 /* PIO8 */
376#elif (CFG_NIOS_CPU_WDTOG_PIO == 9)
377#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO9 /* PIO9 */
378#else
379#error *** CFG_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
380#endif
381
382#if defined(CONFIG_NIOS_BASE_32) /* NIOS CPU specifics */
383#define CONFIG_HW_WDENA_BIT 0 /* WD enable @ Bit 0 */
384#define CONFIG_HW_WDTOG_BIT 0 /* WD trigger @ Bit 0 */
385#define CONFIG_HW_WDPORT_WRONLY 1 /* each WD port wr/only*/
386#else
387#error *** CFG_ERROR: missing watchdog bit configuration, expand your config.h
388#endif
389
390#endif /* CONFIG_HW_WATCHDOG */
391
392/*------------------------------------------------------------------------
393 * SERIAL PERIPHAREL INTERFACE
394 *----------------------------------------------------------------------*/
395#if (CFG_NIOS_CPU_SPI_NUMS == 1)
396
397#define CONFIG_NIOS_SPI 1 /* SPI support active */
398#define CFG_NIOS_SPIBASE CFG_NIOS_CPU_SPI0
399#define CFG_NIOS_SPIBITS CFG_NIOS_CPU_SPI0_BITS
400
401#define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */
402#define CFG_SPI_RTC_DEVID 0 /* as 1st SPI device */
403
404#define __SPI_CMD_OFF 0 /* allow default commands: */
405 /* CFG_CMD_SPI */
406 /* CFG_CMD_DATE */
407
408#else
409#undef CONFIG_NIOS_SPI /* NO SPI support */
410#define __SPI_CMD_OFF ( CFG_CMD_SPI \
411 | CFG_CMD_DATE \
412 )
413#endif
414
415/*------------------------------------------------------------------------
416 * Ethernet -- needs work!
417 *----------------------------------------------------------------------*/
418#if (CFG_NIOS_CPU_LAN_NUMS == 1)
419
420#if (CFG_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
421
422#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
423#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
424#define CONFIG_SMC91111_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
425
426#if (CFG_NIOS_CPU_LAN0_BUSW == 32)
427#define CONFIG_SMC_USE_32_BIT 1
428#else /* no */
429#undef CONFIG_SMC_USE_32_BIT
430#endif
431
432#elif (CFG_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
433
434 /********************************************/
435 /* !!! CS8900 is __not__ tested on NIOS !!! */
436 /********************************************/
437#define CONFIG_DRIVER_CS8900 /* Using CS8900 */
438#define CS8900_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
439
440#if (CFG_NIOS_CPU_LAN0_BUSW == 32)
441#undef CS8900_BUS16
442#define CS8900_BUS32 1
443#else /* no */
444#define CS8900_BUS16 1
445#undef CS8900_BUS32
446#endif
447
448#else
449#error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config
450#endif
451
452#define CONFIG_ETHADDR 02:80:ae:20:60:6f
453#define CONFIG_NETMASK 255.255.255.248
454#define CONFIG_IPADDR 192.168.161.84
455#define CONFIG_SERVERIP 192.168.161.85
456
457#else
458#error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h
459#endif
460
461/*------------------------------------------------------------------------
462 * STATUS LEDs
463 *----------------------------------------------------------------------*/
464#if (CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_LED_PIO)
465
466#if (CFG_NIOS_CPU_LED_PIO == 0)
467
468#define STATUS_LED_BASE CFG_NIOS_CPU_PIO0
469#define STATUS_LED_BITS CFG_NIOS_CPU_PIO0_BITS
470#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
471
472#if (CFG_NIOS_CPU_PIO0_TYPE == 1)
473#define STATUS_LED_WRONLY 1
474#else
475#undef STATUS_LED_WRONLY
476#endif
477
478#elif (CFG_NIOS_CPU_LED_PIO == 1)
479
480#define STATUS_LED_BASE CFG_NIOS_CPU_PIO1
481#define STATUS_LED_BITS CFG_NIOS_CPU_PIO1_BITS
482#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
483
484#if (CFG_NIOS_CPU_PIO1_TYPE == 1)
485#define STATUS_LED_WRONLY 1
486#else
487#undef STATUS_LED_WRONLY
488#endif
489
490#elif (CFG_NIOS_CPU_LED_PIO == 2)
491
492#define STATUS_LED_BASE CFG_NIOS_CPU_PIO2
493#define STATUS_LED_BITS CFG_NIOS_CPU_PIO2_BITS
494#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
495
496#if (CFG_NIOS_CPU_PIO2_TYPE == 1)
497#define STATUS_LED_WRONLY 1
498#else
499#undef STATUS_LED_WRONLY
500#endif
501
502#elif (CFG_NIOS_CPU_LED_PIO == 3)
503
504#error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h
505
506#elif (CFG_NIOS_CPU_LED_PIO == 4)
507
508#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
509
510#elif (CFG_NIOS_CPU_LED_PIO == 5)
511
512#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
513
514#elif (CFG_NIOS_CPU_LED_PIO == 6)
515
516#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
517
518#elif (CFG_NIOS_CPU_LED_PIO == 7)
519
520#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
521
522#elif (CFG_NIOS_CPU_LED_PIO == 8)
523
524#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
525
526#elif (CFG_NIOS_CPU_LED_PIO == 9)
527
528#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
529
530#else
531#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case
532#endif
533
534#define CONFIG_STATUS_LED 1 /* enable status led driver */
535
536#define STATUS_LED_BIT (1 << 0) /* LED[0] */
537#define STATUS_LED_STATE STATUS_LED_BLINKING
538#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
539#define STATUS_LED_PERIOD (CFG_HZ / 2) /* ca. 1 Hz */
540#define STATUS_LED_BOOT 0 /* boot LED */
541
542#if (STATUS_LED_BITS > 1)
543#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
544#define STATUS_LED_STATE1 STATUS_LED_OFF
545#define STATUS_LED_PERIOD1 (CFG_HZ / 10) /* ca. 5 Hz */
546#define STATUS_LED_RED 1 /* fail LED */
547#endif
548
549#if (STATUS_LED_BITS > 2)
550#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
551#define STATUS_LED_STATE2 STATUS_LED_OFF
552#define STATUS_LED_PERIOD2 (CFG_HZ / 2) /* ca. 1 Hz */
553#define STATUS_LED_YELLOW 2 /* info LED */
554#endif
555
556#if (STATUS_LED_BITS > 3)
557#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
558#define STATUS_LED_STATE3 STATUS_LED_OFF
559#define STATUS_LED_PERIOD3 (CFG_HZ / 2) /* ca. 1 Hz */
560#define STATUS_LED_GREEN 3 /* info LED */
561#endif
562
563#define STATUS_LED_PAR 1 /* makes status_led.h happy */
564
565#endif /* CFG_NIOS_CPU_PIO_NUMS */
566
567/*------------------------------------------------------------------------
568 * Diagnostics / Power On Self Tests
569 *----------------------------------------------------------------------*/
570#define CONFIG_POST CFG_POST_RTC
571#define CFG_NIOS_POST_WORD_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
572
573/*------------------------------------------------------------------------
574 * COMMANDS
575 *----------------------------------------------------------------------*/
576#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
577 CFG_CMD_ASKENV | \
578 CFG_CMD_BEDBUG | \
579 CFG_CMD_BMP | \
580 CFG_CMD_CACHE | \
581 CFG_CMD_DOC | \
582 CFG_CMD_DTT | \
583 CFG_CMD_EEPROM | \
584 CFG_CMD_ELF | \
585 CFG_CMD_FAT | \
586 CFG_CMD_FDC | \
587 CFG_CMD_FDOS | \
588 CFG_CMD_HWFLOW | \
589 CFG_CMD_IDE | \
590 CFG_CMD_I2C | \
591 CFG_CMD_JFFS2 | \
592 CFG_CMD_KGDB | \
593 CFG_CMD_NAND | \
594 CFG_CMD_NFS | \
595 CFG_CMD_MMC | \
596 CFG_CMD_MII | \
597 CFG_CMD_PCI | \
598 CFG_CMD_PCMCIA | \
599 CFG_CMD_SCSI | \
600 CFG_CMD_VFD | \
601 CFG_CMD_USB | \
wdenk48abe7b2004-06-09 10:15:00 +0000[diff] [blame]602 CFG_CMD_XIMG | \
wdenkaaf224a2004-03-14 15:20:55 +0000[diff] [blame]603 __SPI_CMD_OFF ) )
604
605
606#include <cmd_confdefs.h>
607
608/*------------------------------------------------------------------------
609 * KGDB
610 *----------------------------------------------------------------------*/
611#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
612#define CONFIG_KGDB_BAUDRATE 9600
613#endif
614
615/*------------------------------------------------------------------------
616 * MISC
617 *----------------------------------------------------------------------*/
618#define CFG_LONGHELP /* undef to save memory */
619#define CFG_HUSH_PARSER 1 /* use "hush" command parser
620 undef to save memory */
621#define CFG_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */
622#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
623#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
624#define CFG_MAXARGS 64 /* max number of command args*/
625#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
626
627#ifdef CFG_HUSH_PARSER
628#define CFG_PROMPT_HUSH_PS2 "[]> "
629#endif
630
631/* Default load address */
632#if (CFG_SRAM_SIZE != 0)
633
634/* default in SRAM */
635#define CFG_LOAD_ADDR CFG_SRAM_BASE
636
637#elif (CFG_SDRAM_SIZE != 0)
638
639/* default in SDRAM */
640#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
641#if 1
642#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
643#else
644#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x400000)
645#endif
646#else
647#define CFG_LOAD_ADDR CFG_SDRAM_BASE
648#endif
649
650#else
651#undef CFG_LOAD_ADDR /* force error break */
652#endif
653
654
655/* MEM test area */
656#if (CFG_SDRAM_SIZE != 0)
657
658/* SDRAM begin to stack area (1MB stack) */
659#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
660#if 0
661#define CFG_MEMTEST_START (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
662#else
663#define CFG_MEMTEST_START (CFG_SDRAM_BASE + 0x400000)
664#endif
665#else
666#define CFG_MEMTEST_START CFG_SDRAM_BASE
667#endif
668
669#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024))
670#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024))
671
672#else
673#undef CFG_MEMTEST_START /* force error break */
674#undef CFG_MEMTEST_END
675#endif
676
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200[diff] [blame]677/*
678 * JFFS2 partitions
679 *
680 */
681/* No command line, one static partition */
682#undef CONFIG_JFFS2_CMDLINE
683#define CONFIG_JFFS2_DEV "nor"
684#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
685#define CONFIG_JFFS2_PART_OFFSET 0x00000000
686
687/* mtdparts command line support */
688/*
689#define CONFIG_JFFS2_CMDLINE
690#define MTDIDS_DEFAULT ""
691#define MTDPARTS_DEFAULT ""
692*/
wdenkaaf224a2004-03-14 15:20:55 +0000[diff] [blame]693
694#endif /* __CONFIG_H */