blob: 3097bc3165254f0ce4d154f5135b052f6330d27e [file] [log] [blame]
wdenkf4675562002-10-02 14:20:15 +00001/*
wdenk414eec32005-04-02 22:37:54 +00002 * (C) Copyright 2000-2005
wdenkf4675562002-10-02 14:20:15 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
37#define CONFIG_TQM850L 1 /* ...on a TQM8xxL module */
38
39#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
40#undef CONFIG_8xx_CONS_SMC2
41#undef CONFIG_8xx_CONS_NONE
42#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
wdenkf4675562002-10-02 14:20:15 +000043
wdenkae3af052003-08-07 22:18:11 +000044#define CONFIG_BOOTCOUNT_LIMIT
45
46#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
wdenkf4675562002-10-02 14:20:15 +000047
48#define CONFIG_BOARD_TYPES 1 /* support board types */
49
Wolfgang Denk32bf3d12008-03-03 12:16:44 +010050#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
wdenkf4675562002-10-02 14:20:15 +000051
52#undef CONFIG_BOOTARGS
wdenk6aff3112002-12-17 01:51:00 +000053
54#define CONFIG_EXTRA_ENV_SETTINGS \
wdenkae3af052003-08-07 22:18:11 +000055 "netdev=eth0\0" \
wdenk6aff3112002-12-17 01:51:00 +000056 "nfsargs=setenv bootargs root=/dev/nfs rw " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010057 "nfsroot=${serverip}:${rootpath}\0" \
wdenk6aff3112002-12-17 01:51:00 +000058 "ramargs=setenv bootargs root=/dev/ram rw\0" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010059 "addip=setenv bootargs ${bootargs} " \
60 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
61 ":${hostname}:${netdev}:off panic=1\0" \
wdenk6aff3112002-12-17 01:51:00 +000062 "flash_nfs=run nfsargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010063 "bootm ${kernel_addr}\0" \
wdenk6aff3112002-12-17 01:51:00 +000064 "flash_self=run ramargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010065 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
66 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
wdenk6aff3112002-12-17 01:51:00 +000067 "rootpath=/opt/eldk/ppc_8xx\0" \
wdenk5e4be002004-01-31 20:13:31 +000068 "bootfile=/tftpboot/TQM850L/uImage\0" \
Wolfgang Denkeb6da802007-09-16 02:39:35 +020069 "fdt_addr=40040000\0" \
70 "kernel_addr=40060000\0" \
71 "ramdisk_addr=40200000\0" \
wdenk6aff3112002-12-17 01:51:00 +000072 ""
73#define CONFIG_BOOTCOMMAND "run flash_self"
wdenkf4675562002-10-02 14:20:15 +000074
75#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
76#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
77
78#undef CONFIG_WATCHDOG /* watchdog disabled */
79
80#define CONFIG_STATUS_LED 1 /* Status LED enabled */
81
82#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
83
Jon Loeliger37d4bb72007-07-09 21:38:02 -050084/*
85 * BOOTP options
86 */
87#define CONFIG_BOOTP_SUBNETMASK
88#define CONFIG_BOOTP_GATEWAY
89#define CONFIG_BOOTP_HOSTNAME
90#define CONFIG_BOOTP_BOOTPATH
91#define CONFIG_BOOTP_BOOTFILESIZE
92
wdenkf4675562002-10-02 14:20:15 +000093
94#define CONFIG_MAC_PARTITION
95#define CONFIG_DOS_PARTITION
96
97#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
98
Jon Loeliger26946902007-07-04 22:30:50 -050099/*
100 * Command line configuration.
101 */
102#include <config_cmd_default.h>
wdenkf4675562002-10-02 14:20:15 +0000103
Jon Loeliger26946902007-07-04 22:30:50 -0500104#define CONFIG_CMD_ASKENV
105#define CONFIG_CMD_DATE
106#define CONFIG_CMD_DHCP
107#define CONFIG_CMD_IDE
108#define CONFIG_CMD_NFS
109#define CONFIG_CMD_SNTP
110
wdenkf4675562002-10-02 14:20:15 +0000111
112/*
113 * Miscellaneous configurable options
114 */
115#define CFG_LONGHELP /* undef to save memory */
wdenk6aff3112002-12-17 01:51:00 +0000116#define CFG_PROMPT "=> " /* Monitor Command Prompt */
117
Wolfgang Denk2751a952006-10-28 02:29:14 +0200118#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
119#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
wdenk6aff3112002-12-17 01:51:00 +0000120#ifdef CFG_HUSH_PARSER
121#define CFG_PROMPT_HUSH_PS2 "> "
122#endif
123
Jon Loeliger26946902007-07-04 22:30:50 -0500124#if defined(CONFIG_CMD_KGDB)
wdenk6aff3112002-12-17 01:51:00 +0000125#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
wdenkf4675562002-10-02 14:20:15 +0000126#else
wdenk6aff3112002-12-17 01:51:00 +0000127#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
wdenkf4675562002-10-02 14:20:15 +0000128#endif
129#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
wdenk6aff3112002-12-17 01:51:00 +0000130#define CFG_MAXARGS 16 /* max number of command args */
wdenkf4675562002-10-02 14:20:15 +0000131#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
132
133#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
134#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
135
136#define CFG_LOAD_ADDR 0x100000 /* default load address */
137
wdenk6aff3112002-12-17 01:51:00 +0000138#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenkf4675562002-10-02 14:20:15 +0000139
140#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
141
142/*
143 * Low Level Configuration Settings
144 * (address mappings, register initial values, etc.)
145 * You should know what you are doing if you make changes here.
146 */
147/*-----------------------------------------------------------------------
148 * Internal Memory Mapped Register
149 */
150#define CFG_IMMR 0xFFF00000
151
152/*-----------------------------------------------------------------------
153 * Definitions for initial stack pointer and data area (in DPRAM)
154 */
155#define CFG_INIT_RAM_ADDR CFG_IMMR
156#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
157#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
158#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
159#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
160
161/*-----------------------------------------------------------------------
162 * Start addresses for the final memory configuration
163 * (Set up by the startup code)
164 * Please note that CFG_SDRAM_BASE _must_ start at 0
165 */
166#define CFG_SDRAM_BASE 0x00000000
167#define CFG_FLASH_BASE 0x40000000
168#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
169#define CFG_MONITOR_BASE CFG_FLASH_BASE
170#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
171
172/*
173 * For booting Linux, the board info and command line data
174 * have to be in the first 8 MB of memory, since this is
175 * the maximum mapped by the Linux kernel during initialization.
176 */
177#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
178
179/*-----------------------------------------------------------------------
180 * FLASH organization
181 */
wdenkf4675562002-10-02 14:20:15 +0000182
Martin Krausee318d9e2007-09-27 11:10:08 +0200183/* use CFI flash driver */
184#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
185#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
186#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
187#define CFG_FLASH_EMPTY_INFO
188#define CFG_FLASH_USE_BUFFER_WRITE 1
189#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
190#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
wdenkf4675562002-10-02 14:20:15 +0000191
192#define CFG_ENV_IS_IN_FLASH 1
193#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
194#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
195
196/* Address and size of Redundant Environment Sector */
197#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
198#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
199
Wolfgang Denk67c31032007-09-16 17:10:04 +0200200#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
201
wdenkf4675562002-10-02 14:20:15 +0000202/*-----------------------------------------------------------------------
203 * Hardware Information Block
204 */
205#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
206#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
207#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
208
209/*-----------------------------------------------------------------------
210 * Cache Configuration
211 */
212#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeliger26946902007-07-04 22:30:50 -0500213#if defined(CONFIG_CMD_KGDB)
wdenkf4675562002-10-02 14:20:15 +0000214#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
215#endif
216
217/*-----------------------------------------------------------------------
218 * SYPCR - System Protection Control 11-9
219 * SYPCR can only be written once after reset!
220 *-----------------------------------------------------------------------
221 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
222 */
223#if defined(CONFIG_WATCHDOG)
224#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
225 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
226#else
227#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
228#endif
229
230/*-----------------------------------------------------------------------
231 * SIUMCR - SIU Module Configuration 11-6
232 *-----------------------------------------------------------------------
233 * PCMCIA config., multi-function pin tri-state
234 */
235#ifndef CONFIG_CAN_DRIVER
236#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
237#else /* we must activate GPL5 in the SIUMCR for CAN */
238#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
239#endif /* CONFIG_CAN_DRIVER */
240
241/*-----------------------------------------------------------------------
242 * TBSCR - Time Base Status and Control 11-26
243 *-----------------------------------------------------------------------
244 * Clear Reference Interrupt Status, Timebase freezing enabled
245 */
246#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
247
248/*-----------------------------------------------------------------------
249 * RTCSC - Real-Time Clock Status and Control Register 11-27
250 *-----------------------------------------------------------------------
251 */
252#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
253
254/*-----------------------------------------------------------------------
255 * PISCR - Periodic Interrupt Status and Control 11-31
256 *-----------------------------------------------------------------------
257 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
258 */
259#define CFG_PISCR (PISCR_PS | PISCR_PITF)
260
261/*-----------------------------------------------------------------------
262 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
263 *-----------------------------------------------------------------------
264 * Reset PLL lock status sticky bit, timer expired status bit and timer
265 * interrupt status bit
wdenkf4675562002-10-02 14:20:15 +0000266 */
wdenkf4675562002-10-02 14:20:15 +0000267#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
wdenkf4675562002-10-02 14:20:15 +0000268
269/*-----------------------------------------------------------------------
270 * SCCR - System Clock and reset Control Register 15-27
271 *-----------------------------------------------------------------------
272 * Set clock output, timebase and RTC source and divider,
273 * power management and some other internal clocks
274 */
275#define SCCR_MASK SCCR_EBDF11
wdenke9132ea2004-04-24 23:23:30 +0000276#define CFG_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
wdenkf4675562002-10-02 14:20:15 +0000277 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
278 SCCR_DFALCD00)
wdenkf4675562002-10-02 14:20:15 +0000279
280/*-----------------------------------------------------------------------
281 * PCMCIA stuff
282 *-----------------------------------------------------------------------
283 *
284 */
285#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
286#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
287#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
288#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
289#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
290#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
291#define CFG_PCMCIA_IO_ADDR (0xEC000000)
292#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
293
294/*-----------------------------------------------------------------------
295 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
296 *-----------------------------------------------------------------------
297 */
298
299#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
300
301#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
302#undef CONFIG_IDE_LED /* LED for ide not supported */
303#undef CONFIG_IDE_RESET /* reset for ide not supported */
304
305#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
306#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
307
308#define CFG_ATA_IDE0_OFFSET 0x0000
309
310#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
311
312/* Offset for data I/O */
313#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
314
315/* Offset for normal register accesses */
316#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
317
318/* Offset for alternate registers */
319#define CFG_ATA_ALT_OFFSET 0x0100
320
wdenkf4675562002-10-02 14:20:15 +0000321/*-----------------------------------------------------------------------
322 *
323 *-----------------------------------------------------------------------
324 *
325 */
wdenkf4675562002-10-02 14:20:15 +0000326#define CFG_DER 0
327
328/*
329 * Init Memory Controller:
330 *
331 * BR0/1 and OR0/1 (FLASH)
332 */
333
334#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
335#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
336
337/* used to re-map FLASH both when starting from SRAM or FLASH:
338 * restrict access enough to keep SRAM working (if any)
339 * but not too much to meddle with FLASH accesses
340 */
341#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
342#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
343
344/*
345 * FLASH timing:
346 */
wdenkf4675562002-10-02 14:20:15 +0000347#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
348 OR_SCY_3_CLK | OR_EHTR | OR_BI)
wdenkf4675562002-10-02 14:20:15 +0000349
350#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
351#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
352#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
353
354#define CFG_OR1_REMAP CFG_OR0_REMAP
355#define CFG_OR1_PRELIM CFG_OR0_PRELIM
356#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
357
358/*
359 * BR2/3 and OR2/3 (SDRAM)
360 *
361 */
362#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
363#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
364#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
365
366/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
367#define CFG_OR_TIMING_SDRAM 0x00000A00
368
369#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
370#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
371
372#ifndef CONFIG_CAN_DRIVER
373#define CFG_OR3_PRELIM CFG_OR2_PRELIM
374#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
375#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
376#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
377#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
378#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
379#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \
380 BR_PS_8 | BR_MS_UPMB | BR_V )
381#endif /* CONFIG_CAN_DRIVER */
382
383/*
384 * Memory Periodic Timer Prescaler
385 *
386 * The Divider for PTA (refresh timer) configuration is based on an
387 * example SDRAM configuration (64 MBit, one bank). The adjustment to
388 * the number of chip selects (NCS) and the actually needed refresh
389 * rate is done by setting MPTPR.
390 *
391 * PTA is calculated from
392 * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
393 *
394 * gclk CPU clock (not bus clock!)
395 * Trefresh Refresh cycle * 4 (four word bursts used)
396 *
397 * 4096 Rows from SDRAM example configuration
398 * 1000 factor s -> ms
399 * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
400 * 4 Number of refresh cycles per period
401 * 64 Refresh cycle in ms per number of rows
402 * --------------------------------------------
403 * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
404 *
405 * 50 MHz => 50.000.000 / Divider = 98
406 * 66 Mhz => 66.000.000 / Divider = 129
407 * 80 Mhz => 80.000.000 / Divider = 156
408 */
wdenke9132ea2004-04-24 23:23:30 +0000409
410#define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
411#define CFG_MAMR_PTA 98
wdenkf4675562002-10-02 14:20:15 +0000412
413/*
414 * For 16 MBit, refresh rates could be 31.3 us
415 * (= 64 ms / 2K = 125 / quad bursts).
416 * For a simpler initialization, 15.6 us is used instead.
417 *
418 * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
419 * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
420 */
421#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
422#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
423
424/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
425#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
426#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
427
428/*
429 * MAMR settings for SDRAM
430 */
431
432/* 8 column SDRAM */
433#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
434 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
435 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
436/* 9 column SDRAM */
437#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
438 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
439 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
440
441
442/*
443 * Internal Definitions
444 *
445 * Boot Flags
446 */
447#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
448#define BOOTFLAG_WARM 0x02 /* Software reboot */
449
450#endif /* __CONFIG_H */