blob: 9a3e5f669092ffb19851ee6ad2d2d7464a7b4f90 [file] [log] [blame]
wdenk16f21702002-08-26 21:58:50 +00001/*
2 * (C) Copyright 2000
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <common.h>
25#include <commproc.h>
26#include <mpc8xx.h>
27
28#ifdef CONFIG_SHOW_BOOT_PROGRESS
29# include <status_led.h>
30# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
31#else
32# define SHOW_BOOT_PROGRESS(arg)
33#endif
34
Wolfgang Denkd87080b2006-03-31 18:32:53 +020035DECLARE_GLOBAL_DATA_PTR;
36
wdenk16f21702002-08-26 21:58:50 +000037/* ------------------------------------------------------------------------- */
38
39static long int dram_size (long int, long int *, long int);
40static ulong board_init (void);
41static void send_smi_frame (volatile scc_t * sp, volatile cbd_t * bd,
42 uchar * msg);
43
44/* ------------------------------------------------------------------------- */
45
46#define _NOT_USED_ 0xFFFFFFFF
47
48const uint sdram_table[] = {
49 /*
50 * Single Read. (Offset 0 in UPMA RAM)
51 */
52 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
53 0x1ff77c47, /* last */
54 /*
55 * SDRAM Initialization (offset 5 in UPMA RAM)
56 *
57 * This is no UPM entry point. The following definition uses
58 * the remaining space to establish an initialization
59 * sequence, which is executed by a RUN command.
60 *
61 */
62 0x1fe77c35, 0xffaffc34, 0x1fa57c35, /* last */
63 /*
64 * Burst Read. (Offset 8 in UPMA RAM)
65 */
66 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
67 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */
68 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
69 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
70 /*
71 * Single Write. (Offset 18 in UPMA RAM)
72 */
73 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */
74 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
75 /*
76 * Burst Write. (Offset 20 in UPMA RAM)
77 */
78 0x1f07fc04, 0xeeaebc00, 0x10ad4c00, 0xf0afcc00,
79 0xf0afcc00, 0xe1bb8c06, 0x1ff77c47, /* last */
80 _NOT_USED_,
81 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
82 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
83 /*
84 * Refresh (Offset 30 in UPMA RAM)
85 */
86 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
87 0xfffffc84, 0xfffffc07, /* last */
88 _NOT_USED_, _NOT_USED_,
89 _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
90 /*
91 * Exception. (Offset 3c in UPMA RAM)
92 */
93 0x7ffffc07, /* last */
94 _NOT_USED_, _NOT_USED_, _NOT_USED_,
95};
96
97/* ------------------------------------------------------------------------- */
98
99
100/*
101 * Check Board Identity:
102 *
103 * Test ID string (HERMES...)
104 *
105 * Return code for board revision and network speed
106 */
107
108int checkboard (void)
109{
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200110 char *s = getenv ("serial#");
111 char *e;
wdenk16f21702002-08-26 21:58:50 +0000112
113 puts ("Board: ");
114
115 if (!s || strncmp (s, "HERMES", 6)) {
116 puts ("### No HW ID - assuming HERMES-PRO");
117 } else {
118 for (e = s; *e; ++e) {
119 if (*e == ' ')
120 break;
121 }
122
123 for (; s < e; ++s) {
124 putc (*s);
125 }
126 }
127
128 gd->board_type = board_init ();
129
130 printf (" Rev. %ld.x\n", (gd->board_type >> 16));
131
132 return (0);
133}
134
135/* ------------------------------------------------------------------------- */
136
Becky Bruce9973e3c2008-06-09 16:03:40 -0500137phys_size_t initdram (int board_type)
wdenk16f21702002-08-26 21:58:50 +0000138{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200139 volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
wdenk16f21702002-08-26 21:58:50 +0000140 volatile memctl8xx_t *memctl = &immap->im_memctl;
141 long int size, size8, size9;
142
143 upmconfig (UPMA, (uint *) sdram_table,
144 sizeof (sdram_table) / sizeof (uint));
145
146 /*
147 * Preliminary prescaler for refresh
148 */
149 memctl->memc_mptpr = 0x0400;
150
151 memctl->memc_mar = 0x00000088;
152
153 /*
154 * Map controller banks 1 to the SDRAM banks at preliminary address
155 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200156 memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
157 memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
wdenk16f21702002-08-26 21:58:50 +0000158
159 /* HERMES-PRO boards have only one bank SDRAM */
160
161
162 udelay (200);
163
164 /* perform SDRAM initializsation sequence */
165
166 memctl->memc_mamr = 0xD0802114;
167 memctl->memc_mcr = 0x80002105;
168 udelay (1);
169 memctl->memc_mamr = 0xD0802118;
170 memctl->memc_mcr = 0x80002130;
171 udelay (1);
172 memctl->memc_mamr = 0xD0802114;
173 memctl->memc_mcr = 0x80002106;
174
175 udelay (1000);
176
177 /*
178 * Check Bank 0 Memory Size for re-configuration
179 *
180 * try 8 column mode
181 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200182 size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE_PRELIM,
wdenk16f21702002-08-26 21:58:50 +0000183 SDRAM_MAX_SIZE);
184
185 udelay (1000);
186
187 /*
188 * try 9 column mode
189 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200190 size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
wdenk16f21702002-08-26 21:58:50 +0000191 SDRAM_MAX_SIZE);
192
193 if (size8 < size9) { /* leave configuration at 9 columns */
194 size = size9;
195/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
196 } else { /* back to 8 columns */
197 size = size8;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200198 memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
wdenk16f21702002-08-26 21:58:50 +0000199 udelay (500);
200/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
201 }
202
203 udelay (1000);
204
205 memctl->memc_or1 = ((-size) & 0xFFFF0000) | SDRAM_TIMING;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200206 memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
wdenk16f21702002-08-26 21:58:50 +0000207
208 udelay (10000);
209
210 return (size);
211}
212
213/* ------------------------------------------------------------------------- */
214
215/*
216 * Check memory range for valid RAM. A simple memory test determines
217 * the actually available RAM size between addresses `base' and
218 * `base + maxsize'. Some (not all) hardware errors are detected:
219 * - short between address lines
220 * - short between data lines
221 */
222
223static long int dram_size (long int mamr_value, long int *base,
224 long int maxsize)
225{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200226 volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
wdenk16f21702002-08-26 21:58:50 +0000227 volatile memctl8xx_t *memctl = &immap->im_memctl;
wdenk16f21702002-08-26 21:58:50 +0000228
229 memctl->memc_mamr = mamr_value;
230
wdenkc83bf6a2004-01-06 22:38:14 +0000231 return (get_ram_size(base, maxsize));
wdenk16f21702002-08-26 21:58:50 +0000232}
233
234/* ------------------------------------------------------------------------- */
235
236#define PB_LED_3 0x00020000 /* Status LED's */
237#define PB_LED_2 0x00010000
238#define PB_LED_1 0x00008000
239#define PB_LED_0 0x00004000
240
241#define PB_LED_ALL (PB_LED_0 | PB_LED_1 | PB_LED_2 | PB_LED_3)
242
243#define PC_REP_SPD1 0x00000800
244#define PC_REP_SPD0 0x00000400
245
246#define PB_RESET_2081 0x00000020 /* Reset PEB2081 */
247
248#define PB_MAI_4 0x00000010 /* Configuration */
249#define PB_MAI_3 0x00000008
250#define PB_MAI_2 0x00000004
251#define PB_MAI_1 0x00000002
252#define PB_MAI_0 0x00000001
253
254#define PB_MAI_ALL (PB_MAI_0 | PB_MAI_1 | PB_MAI_2 | PB_MAI_3 | PB_MAI_4)
255
256
257#define PC_REP_MGRPRS 0x0200
258#define PC_REP_SPD 0x0040 /* Select 100 Mbps */
259#define PC_REP_RES 0x0004
260#define PC_BIT14 0x0002 /* ??? */
261#define PC_BIT15 0x0001 /* ??? ENDSL ?? */
262
263/* ------------------------------------------------------------------------- */
264
265static ulong board_init (void)
266{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200267 volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
wdenk16f21702002-08-26 21:58:50 +0000268 ulong reg, revision, speed = 100;
269 int ethspeed;
270 char *s;
271
272 if ((s = getenv ("ethspeed")) != NULL) {
273 if (strcmp (s, "100") == 0) {
274 ethspeed = 100;
275 } else if (strcmp (s, "10") == 0) {
276 ethspeed = 10;
277 } else {
278 ethspeed = 0;
279 }
280 } else {
281 ethspeed = 0;
282 }
283
284 /* Configure Port B Output Pins => 0x0003cc3F */
285 reg = PB_LED_ALL | PC_REP_SPD1 | PC_REP_SPD0 | PB_RESET_2081 |
286 PB_MAI_ALL;
287 immr->im_cpm.cp_pbpar &= ~reg;
288 immr->im_cpm.cp_pbodr &= ~reg;
289 immr->im_cpm.cp_pbdat &= ~reg; /* all 0 */
290 immr->im_cpm.cp_pbdir |= reg;
291
292 /* Check hardware revision */
293 if ((immr->im_ioport.iop_pcdat & 0x0003) == 0x0003) {
294 /*
295 * Revision 3.x hardware
296 */
297 revision = 3;
298
299 immr->im_ioport.iop_pcdat = 0x0240;
300 immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_SPD | PC_REP_RES | PC_BIT14); /* = 0x0246 */
301 immr->im_ioport.iop_pcdat |= PC_REP_RES;
302 } else {
303 immr->im_ioport.iop_pcdat = 0x0002;
304 immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_RES | PC_BIT14 | PC_BIT15); /* = 0x0207 */
305
306 if ((immr->im_ioport.iop_pcdat & PC_REP_SPD) == 0) {
307 /*
308 * Revision 2.x hardware: PC9 connected to PB21
309 */
310 revision = 2;
311
312 if (ethspeed == 0) {
313 /* both 10 and 100 Mbps allowed:
314 * select 10 Mbps and autonegotiation
315 */
316 puts (" [10+100]");
317 immr->im_cpm.cp_pbdat = 0; /* SPD1:SPD0 = 0:0 - autonegot. */
318 speed = 10;
319 } else if (ethspeed == 10) {
320 /* we are asked for 10 Mbps,
321 * so select 10 Mbps
322 */
323 puts (" [10]");
324 immr->im_cpm.cp_pbdat = 0; /* ??? */
325 speed = 10;
326 } else {
327 /* anything else:
328 * select 100 Mbps
329 */
330 puts (" [100]");
331 immr->im_cpm.cp_pbdat = PC_REP_SPD0 | PC_REP_SPD1;
332 /* SPD1:SPD0 = 1:1 - 100 Mbps */
333 speed = 100;
334 }
335 immr->im_ioport.iop_pcdat |= (PC_REP_RES | PC_BIT14);
336
337 /* must be run from RAM */
338 /* start_lxt980 (speed); */
339 /*************************/
340 } else {
341 /*
342 * Revision 1.x hardware
343 */
344 revision = 1;
345
346 immr->im_ioport.iop_pcdat = PC_REP_MGRPRS | PC_BIT14; /* = 0x0202 */
347 immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_SPD | PC_REP_RES | PC_BIT14 | PC_BIT15); /* = 0x0247 */
348
349 if (ethspeed == 0) {
350 /* both 10 and 100 Mbps allowed:
351 * select 100 Mbps and autonegotiation
352 */
353 puts (" [10+100]");
354 immr->im_cpm.cp_pbdat = 0; /* SPD1:SPD0 = 0:0 - autonegot. */
355 immr->im_ioport.iop_pcdat |= PC_REP_SPD;
356 } else if (ethspeed == 10) {
357 /* we are asked for 10 Mbps,
358 * so select 10 Mbps
359 */
360 puts (" [10]");
361 immr->im_cpm.cp_pbdat = PC_REP_SPD0; /* SPD1:SPD0 = 0:1 - 10 Mbps */
362 } else {
363 /* anything else:
364 * select 100 Mbps
365 */
366 puts (" [100]");
367 immr->im_cpm.cp_pbdat = PC_REP_SPD0 | PC_REP_SPD1;
368 /* SPD1:SPD0 = 1:1 - 100 Mbps */
369 immr->im_ioport.iop_pcdat |= PC_REP_SPD;
370 }
371
372 immr->im_ioport.iop_pcdat |= PC_REP_RES;
373 }
374 }
375 SHOW_BOOT_PROGRESS (0x00);
376
377 return ((revision << 16) | (speed & 0xFFFF));
378}
379
380/* ------------------------------------------------------------------------- */
381
382#define SCC_SM 1 /* Index => SCC2 */
383#define PROFF PROFF_SCC2
384
385#define SMI_MSGLEN 8 /* Length of SMI Messages */
386
387#define PHYGPCR_ADDR 0x109 /* Port Enable */
388#define PHYPCR_ADDR 0x132 /* PHY Port Control Reg. (port 1) */
389#define LEDPCR_ADDR 0x141 /* LED Port Control Reg. */
390#define RPRESET_ADDR 0x144 /* Repeater Reset */
391
392#define PHYPCR_SPEED 0x2000 /* on for 100 Mbps, off for 10 Mbps */
393#define PHYPCR_AN 0x1000 /* on to enable Auto-Negotiation */
394#define PHYPCR_REST_AN 0x0200 /* on to restart Auto-Negotiation */
395#define PHYPCR_FDX 0x0100 /* on for Full Duplex, off for HDX */
396#define PHYPCR_COLT 0x0080 /* on to enable COL signal test */
397
398/* ------------------------------------------------------------------------- */
399
400/*
401 * Must run from RAM:
402 * uses parameter RAM area which is used for stack while running from ROM
403 */
404void hermes_start_lxt980 (int speed)
405{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200406 volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
wdenk16f21702002-08-26 21:58:50 +0000407 volatile cpm8xx_t *cp = (cpm8xx_t *) & (immr->im_cpm);
408 volatile scc_t *sp = (scc_t *) & (cp->cp_scc[SCC_SM]);
409 volatile cbd_t *bd;
410 volatile hdlc_pram_t *hp;
411 uchar smimsg[SMI_MSGLEN];
412 ushort phypcrval;
413 uint bd_off;
414 int pnr;
415
416 printf ("LXT9880: %3d Mbps\n", speed);
417
418 immr->im_ioport.iop_paodr |= 0x0008; /* init PAODR: PA12 (TXD2) open drain */
419 immr->im_ioport.iop_papar |= 0x400c; /* init PAPAR: TXD2, RXD2, BRGO4 */
420 immr->im_ioport.iop_padir &= 0xbff3; /* init PADIR: BRGO4 */
421 immr->im_ioport.iop_padir |= 0x4000;
422
423 /* get temporary BD; no need for permanent alloc */
424 bd_off = dpram_base_align (8);
425
426 bd = (cbd_t *) (immr->im_cpm.cp_dpmem + bd_off);
427
428 bd->cbd_bufaddr = 0;
429 bd->cbd_datlen = 0;
430 bd->cbd_sc = BD_SC_WRAP | BD_SC_LAST | BD_SC_INTRPT | BD_SC_TC;
431
432 /* init. baudrate generator BRG4 */
433 cp->cp_brgc4 = (0x00010000 | (50 << 1)); /* output 1 MHz */
434
435 cp->cp_sicr &= 0xFFFF00FF; /* SICR: mask SCC2 */
436 cp->cp_sicr |= 0x00001B00; /* SICR: SCC2 clk BRG4 */
437
438 /* init SCC_SM register */
439 sp->scc_psmr = 0x0000; /* init PSMR: no additional flags */
440 sp->scc_todr = 0x0000;
441 sp->scc_dsr = 0x7e7e;
442
443 /* init. SCC_SM parameter area */
444 hp = (hdlc_pram_t *) & cp->cp_dparam[PROFF];
445
446 hp->tbase = bd_off; /* offset from beginning of DPRAM */
447
448 hp->rfcr = 0x18;
449 hp->tfcr = 0x18;
450 hp->mrblr = 10;
451
452 hp->c_mask = 0x0000f0b8;
453 hp->c_pres = 0x0000ffff;
454
455 hp->disfc = 0;
456 hp->crcec = 0;
457 hp->abtsc = 0;
458 hp->nmarc = 0;
459 hp->retrc = 0;
460
461 hp->mflr = 10;
462
463 hp->rfthr = 1;
464
465 hp->hmask = 0;
466 hp->haddr1 = 0;
467 hp->haddr2 = 0;
468 hp->haddr3 = 0;
469 hp->haddr4 = 0;
470
471 cp->cp_cpcr = SCC_SM << 6 | 0x0001; /* SCC_SM: init TX/RX params */
472 while (cp->cp_cpcr & CPM_CR_FLG);
473
474 /* clear all outstanding SCC events */
475 sp->scc_scce = ~0;
476
477 /* enable transmitter: GSMR_L: TPL=2(16bits), TPP=3(all ones), ENT */
478 sp->scc_gsmrh = 0;
479 sp->scc_gsmrl |= SCC_GSMRL_TPL_16 | SCC_GSMRL_TPP_ALL1 |
480 SCC_GSMRL_ENT | SCC_GSMRL_MODE_HDLC;
481
482#if 0
483 smimsg[0] = 0x00; /* CHIP/HUB ID */
484 smimsg[1] = 0x38; /* WRITE CMD */
485 smimsg[2] = (RPRESET_ADDR << 4) & 0xf0;
486 smimsg[3] = RPRESET_ADDR >> 4;
487 smimsg[4] = 0x01;
488 smimsg[5] = 0x00;
489 smimsg[6] = 0x00;
490 smimsg[7] = 0x00;
491
492 send_smi_frame (sp, bd, smimsg);
493#endif
494
495 smimsg[0] = 0x7f; /* BROADCAST */
496 smimsg[1] = 0x34; /* ASSIGN HUB ID */
497 smimsg[2] = 0x00;
498 smimsg[3] = 0x00;
499 smimsg[4] = 0x00; /* HUB ID = 0 */
500 smimsg[5] = 0x00;
501 smimsg[6] = 0x00;
502 smimsg[7] = 0x00;
503
504 send_smi_frame (sp, bd, smimsg);
505
506 smimsg[0] = 0x7f; /* BROADCAST */
507 smimsg[1] = 0x3c; /* SET ARBOUT TO 0 */
508 smimsg[2] = 0x00; /* ADDRESS = 0 */
509 smimsg[3] = 0x00;
510 smimsg[4] = 0x00; /* DATA = 0 */
511 smimsg[5] = 0x00;
512 smimsg[6] = 0x00;
513 smimsg[7] = 0x00;
514
515 send_smi_frame (sp, bd, smimsg);
516
517 if (speed == 100) {
518 phypcrval = PHYPCR_SPEED; /* 100 MBIT, disable autoneg. */
519 } else {
520 phypcrval = 0; /* 10 MBIT, disable autoneg. */
521 }
522
523 /* send MSGs */
524 for (pnr = 0; pnr < 8; pnr++) {
525 smimsg[0] = 0x00; /* CHIP/HUB ID */
526 smimsg[1] = 0x38; /* WRITE CMD */
527 smimsg[2] = ((PHYPCR_ADDR + pnr) << 4) & 0xf0;
528 smimsg[3] = (PHYPCR_ADDR + pnr) >> 4;
529 smimsg[4] = (unsigned char) (phypcrval & 0xff);
530 smimsg[5] = (unsigned char) (phypcrval >> 8);
531 smimsg[6] = 0x00;
532 smimsg[7] = 0x00;
533
534 send_smi_frame (sp, bd, smimsg);
535 }
536
537 smimsg[0] = 0x00; /* CHIP/HUB ID */
538 smimsg[1] = 0x38; /* WRITE CMD */
539 smimsg[2] = (PHYGPCR_ADDR << 4) & 0xf0;
540 smimsg[3] = PHYGPCR_ADDR >> 4;
541 smimsg[4] = 0xff; /* enable port 1-8 */
542 smimsg[5] = 0x01; /* enable MII1 (0x01) */
543 smimsg[6] = 0x00;
544 smimsg[7] = 0x00;
545
546 send_smi_frame (sp, bd, smimsg);
547
548 smimsg[0] = 0x00; /* CHIP/HUB ID */
549 smimsg[1] = 0x38; /* WRITE CMD */
550 smimsg[2] = (LEDPCR_ADDR << 4) & 0xf0;
551 smimsg[3] = LEDPCR_ADDR >> 4;
552 smimsg[4] = 0xaa; /* Port 1-8 Conf.bits = 10 (Hardware control) */
553 smimsg[5] = 0xaa;
554 smimsg[6] = 0x00;
555 smimsg[7] = 0x00;
556
557 send_smi_frame (sp, bd, smimsg);
558
559 /*
560 * Disable Transmitter (so that we can free the BD, too)
561 */
562 sp->scc_gsmrl &= ~SCC_GSMRL_ENT;
563}
564
565/* ------------------------------------------------------------------------- */
566
567static void send_smi_frame (volatile scc_t * sp, volatile cbd_t * bd,
568 uchar * msg)
569{
570#ifdef DEBUG
571 unsigned hub, chip, cmd, length, addr;
572
573 hub = msg[0] & 0x1F;
574 chip = msg[0] >> 5;
575 cmd = msg[1] & 0x1F;
576 length = (msg[1] >> 5) | ((msg[2] & 0x0F) << 3);
577 addr = (msg[2] >> 4) | (msg[3] << 4);
578
579 printf ("SMI send: Hub %02x Chip %x Cmd %02x Len %d Addr %03x: "
580 "%02x %02x %02x %02x\n",
581 hub, chip, cmd, length, addr, msg[4], msg[5], msg[6], msg[7]);
582#endif /* DEBUG */
583
584 bd->cbd_bufaddr = (uint) msg;
585 bd->cbd_datlen = SMI_MSGLEN;
586 bd->cbd_sc |= BD_SC_READY;
587
588 /* wait for msg transmitted */
589 while ((sp->scc_scce & 0x0002) == 0);
590 /* clear all events */
591 sp->scc_scce = ~0;
592}
593
594/* ------------------------------------------------------------------------- */
595
596void show_boot_progress (int status)
597{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200598 volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
wdenk16f21702002-08-26 21:58:50 +0000599
Heiko Schocher566a4942007-06-22 19:11:54 +0200600 if (status < -32) status = -1; /* let things compatible */
wdenk16f21702002-08-26 21:58:50 +0000601 status ^= 0x0F;
602 status = (status & 0x0F) << 14;
603 immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & ~PB_LED_ALL) | status;
604}
605
606/* ------------------------------------------------------------------------- */