blob: c74e622b8c7e7087eb89386f3a21ac22ab9682ff [file] [log] [blame]
Anatolij Gustschin4387cf12012-08-31 01:29:57 +00001/*
2 * (C) Copyright 2012
3 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
9 */
10
11/*
12 * Valid values for CONFIG_SYS_TEXT_BASE are:
13 * 0xFC000000 boot low boot high (standard configuration)
14 * 0x00100000 boot from RAM (for testing only)
15 */
16#ifndef CONFIG_SYS_TEXT_BASE
17#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */
18#endif
19
20/* Board specific flash config */
21#define CONFIG_SYS_FLASH_BASE 0xfc000000
22#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */
23/* max number of sectors on one chip */
24#define CONFIG_SYS_MAX_FLASH_SECT 512
25
26/*
27 * Include common defines for all ifm boards
28 */
29#include "o2dnt-common.h"
30
31/*
32 * GPIO configuration:
33 * CS1 SDRAM activate + no CAN + no PCI
34 */
35#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004
36
37/* Other board specific configs */
38#define CONFIG_SYS_BOOTCS_CFG 0x00057d01
39#define CONFIG_SYS_RESET_ADDRESS 0xfc000000
40
41#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
42#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */
43
44/* Use redundant environment */
45#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
46#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
47
48#define CONFIG_BOARD_NAME "o2d300"
49#define CONFIG_BOARD_BOOTCMD "run dhcp_boot"
50#define CONFIG_BOARD_MEM_LIMIT xstr(126)
51#define BOARD_POST_CRC32_END xstr(0x02000000)
52
53#define CONFIG_EXTRA_ENV_SETTINGS \
54 CONFIG_IFM_DEFAULT_ENV_SETTINGS \
55 CONFIG_IFM_DEFAULT_ENV_OLD \
56 CONFIG_IFM_DEFAULT_ENV_NEW \
57 "autoload=no\0" \
58 "dhcp_boot=run dhcpcmd;run flash_mtd\0" \
59 "flash_mtd=run mtd_args addip addmem;" \
60 "bootm ${kernel_addr}\0" \
61 "mtd_args=setenv bootargs root=/dev/mtdblock4 " \
62 "rw rootfstype=cramfs\0" \
63 "linbot=fc080000\0" \
64 "lintop=fc17ffff\0" \
65 "rambot=fc180000\0" \
66 "ramtop=fc57ffff\0" \
67 "jffbot=fc580000\0" \
68 "jfftop=fd39ffff\0" \
69 "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
70 "ubotop=fc03ffff\0" \
71 "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0" \
72 "halbot=fd3a0000\0" \
73 "haltop=fdf9ffff\0" \
74 "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};" \
75 "cp.b ${fileaddr} ${halbot} ${filesize}\0" \
76 "kernel_addr=0xfc060000\0" \
77 "ramdisk_addr=0xfc160000\0" \
78 "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \
79 "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \
80 "netretry=once\0" \
81 "protcmd=protect on ${linbot} ${lintop};" \
82 "protect on ${rambot} ${ramtop}\0" \
83 "o2derror=def_env\0" \
84 "sensorType=O2D300AA\0"