blob: 25150aba749dceca778fb0943fc64ae8a682bd52 [file] [log] [blame]
Samuel Hollande210ec02020-10-24 10:21:55 -05001// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
3// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
4// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
5
6#include "sun50i-a64.dtsi"
7#include "sun50i-a64-cpu-opp.dtsi"
8
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/leds/common.h>
12#include <dt-bindings/pwm/pwm.h>
13
14/ {
15 aliases {
16 serial0 = &uart0;
17 };
18
19 backlight: backlight {
20 compatible = "pwm-backlight";
21 pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
22 enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
23 /* Backlight configuration differs per PinePhone revision. */
24 };
25
26 chosen {
27 stdout-path = "serial0:115200n8";
28 };
29
30 leds {
31 compatible = "gpio-leds";
32
33 blue {
34 function = LED_FUNCTION_INDICATOR;
35 color = <LED_COLOR_ID_BLUE>;
36 gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
37 };
38
39 green {
40 function = LED_FUNCTION_INDICATOR;
41 color = <LED_COLOR_ID_GREEN>;
42 gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
43 };
44
45 red {
46 function = LED_FUNCTION_INDICATOR;
47 color = <LED_COLOR_ID_RED>;
48 gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
49 };
50 };
51
52 speaker_amp: audio-amplifier {
53 compatible = "simple-audio-amplifier";
54 enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
55 sound-name-prefix = "Speaker Amp";
56 };
57
58 vibrator {
59 compatible = "gpio-vibrator";
60 enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
61 vcc-supply = <&reg_dcdc1>;
62 };
63};
64
65&codec {
66 status = "okay";
67};
68
69&codec_analog {
70 cpvdd-supply = <&reg_eldo1>;
71 status = "okay";
72};
73
74&cpu0 {
75 cpu-supply = <&reg_dcdc2>;
76};
77
78&cpu1 {
79 cpu-supply = <&reg_dcdc2>;
80};
81
82&cpu2 {
83 cpu-supply = <&reg_dcdc2>;
84};
85
86&cpu3 {
87 cpu-supply = <&reg_dcdc2>;
88};
89
90&dai {
91 status = "okay";
92};
93
94&de {
95 status = "okay";
96};
97
98&dphy {
99 status = "okay";
100};
101
102&dsi {
103 vcc-dsi-supply = <&reg_dldo1>;
104 status = "okay";
105
106 panel@0 {
107 compatible = "xingbangda,xbd599";
108 reg = <0>;
109 reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
110 iovcc-supply = <&reg_dldo2>;
111 vcc-supply = <&reg_ldo_io0>;
112 backlight = <&backlight>;
113 };
114};
115
116&ehci0 {
117 status = "okay";
118};
119
120&ehci1 {
121 status = "okay";
122};
123
124&i2c0 {
125 status = "okay";
126
127 touchscreen@5d {
128 compatible = "goodix,gt917s";
129 reg = <0x5d>;
130 interrupt-parent = <&pio>;
131 interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
132 irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
133 reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
134 AVDD28-supply = <&reg_ldo_io0>;
135 VDDIO-supply = <&reg_ldo_io0>;
136 touchscreen-size-x = <720>;
137 touchscreen-size-y = <1440>;
138 };
139};
140
141&i2c1 {
142 status = "okay";
143
144 /* Magnetometer */
145 lis3mdl: lis3mdl@1e {
146 compatible = "st,lis3mdl-magn";
147 reg = <0x1e>;
148 vdd-supply = <&reg_dldo1>;
149 vddio-supply = <&reg_dldo1>;
150 };
151
152 /* Accelerometer/gyroscope */
153 mpu6050@68 {
154 compatible = "invensense,mpu6050";
155 reg = <0x68>;
156 interrupt-parent = <&pio>;
157 interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
158 vdd-supply = <&reg_dldo1>;
159 vddio-supply = <&reg_dldo1>;
160 };
161};
162
163/* Connected to pogo pins (external spring based pinheader for user addons) */
164&i2c2 {
165 status = "okay";
166};
167
168&lradc {
169 vref-supply = <&reg_aldo3>;
170 status = "okay";
171
172 button-200 {
173 label = "Volume Up";
174 linux,code = <KEY_VOLUMEUP>;
175 channel = <0>;
176 voltage = <200000>;
177 };
178
179 button-400 {
180 label = "Volume Down";
181 linux,code = <KEY_VOLUMEDOWN>;
182 channel = <0>;
183 voltage = <400000>;
184 };
185};
186
187&mmc0 {
188 pinctrl-names = "default";
189 pinctrl-0 = <&mmc0_pins>;
190 vmmc-supply = <&reg_dcdc1>;
191 vqmmc-supply = <&reg_dcdc1>;
192 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
193 disable-wp;
194 bus-width = <4>;
195 status = "okay";
196};
197
198&mmc2 {
199 pinctrl-names = "default";
200 pinctrl-0 = <&mmc2_pins>;
201 vmmc-supply = <&reg_dcdc1>;
202 vqmmc-supply = <&reg_dcdc1>;
203 bus-width = <8>;
204 non-removable;
205 cap-mmc-hw-reset;
206 status = "okay";
207};
208
209&ohci0 {
210 status = "okay";
211};
212
213&ohci1 {
214 status = "okay";
215};
216
217&pio {
218 vcc-pb-supply = <&reg_dcdc1>;
219 vcc-pc-supply = <&reg_dcdc1>;
220 vcc-pd-supply = <&reg_dcdc1>;
221 vcc-pe-supply = <&reg_aldo1>;
222 vcc-pf-supply = <&reg_dcdc1>;
223 vcc-pg-supply = <&reg_dldo4>;
224 vcc-ph-supply = <&reg_dcdc1>;
225};
226
227&r_pio {
228 /*
229 * FIXME: We can't add that supply for now since it would
230 * create a circular dependency between pinctrl, the regulator
231 * and the RSB Bus.
232 *
233 * vcc-pl-supply = <&reg_aldo2>;
234 */
235};
236
237&r_pwm {
238 status = "okay";
239};
240
241&r_rsb {
242 status = "okay";
243
244 axp803: pmic@3a3 {
245 compatible = "x-powers,axp803";
246 reg = <0x3a3>;
247 interrupt-parent = <&r_intc>;
248 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
249 };
250};
251
252#include "axp803.dtsi"
253
254&ac_power_supply {
255 status = "okay";
256};
257
258&battery_power_supply {
259 status = "okay";
260};
261
262&reg_aldo1 {
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <1800000>;
265 regulator-name = "dovdd-csi";
266};
267
268&reg_aldo2 {
269 regulator-always-on;
270 regulator-min-microvolt = <1800000>;
271 regulator-max-microvolt = <1800000>;
272 regulator-name = "vcc-pl";
273};
274
275&reg_aldo3 {
276 regulator-always-on;
277 regulator-min-microvolt = <2700000>;
278 regulator-max-microvolt = <3300000>;
279 regulator-name = "vcc-pll-avcc";
280};
281
282&reg_dcdc1 {
283 regulator-always-on;
284 regulator-min-microvolt = <3300000>;
285 regulator-max-microvolt = <3300000>;
286 regulator-name = "vcc-3v3";
287};
288
289&reg_dcdc2 {
290 regulator-always-on;
291 regulator-min-microvolt = <1000000>;
292 regulator-max-microvolt = <1300000>;
293 regulator-name = "vdd-cpux";
294};
295
296/* DCDC3 is polyphased with DCDC2 */
297
298&reg_dcdc5 {
299 regulator-always-on;
300 regulator-min-microvolt = <1200000>;
301 regulator-max-microvolt = <1200000>;
302 regulator-name = "vcc-dram";
303};
304
305&reg_dcdc6 {
306 regulator-always-on;
307 regulator-min-microvolt = <1100000>;
308 regulator-max-microvolt = <1100000>;
309 regulator-name = "vdd-sys";
310};
311
312&reg_dldo1 {
313 regulator-min-microvolt = <3300000>;
314 regulator-max-microvolt = <3300000>;
315 regulator-name = "vcc-dsi-sensor";
316};
317
318&reg_dldo2 {
319 regulator-min-microvolt = <1800000>;
320 regulator-max-microvolt = <1800000>;
321 regulator-name = "vcc-mipi-io";
322};
323
324&reg_dldo3 {
325 regulator-min-microvolt = <2800000>;
326 regulator-max-microvolt = <2800000>;
327 regulator-name = "avdd-csi";
328};
329
330&reg_dldo4 {
331 regulator-min-microvolt = <1800000>;
332 regulator-max-microvolt = <1800000>;
333 regulator-name = "vcc-wifi-io";
334};
335
336&reg_eldo1 {
337 regulator-always-on;
338 regulator-min-microvolt = <1800000>;
339 regulator-max-microvolt = <1800000>;
340 regulator-name = "vcc-lpddr";
341};
342
343&reg_eldo3 {
344 regulator-min-microvolt = <1800000>;
345 regulator-max-microvolt = <1800000>;
346 regulator-name = "dvdd-1v8-csi";
347};
348
349&reg_fldo1 {
350 regulator-min-microvolt = <1200000>;
351 regulator-max-microvolt = <1200000>;
352 regulator-name = "vcc-1v2-hsic";
353};
354
355&reg_fldo2 {
356 regulator-always-on;
357 regulator-min-microvolt = <1100000>;
358 regulator-max-microvolt = <1100000>;
359 regulator-name = "vdd-cpus";
360};
361
362&reg_ldo_io0 {
363 regulator-min-microvolt = <3300000>;
364 regulator-max-microvolt = <3300000>;
365 regulator-name = "vcc-lcd-ctp-stk";
366 status = "okay";
367};
368
369&reg_ldo_io1 {
370 regulator-min-microvolt = <1800000>;
371 regulator-max-microvolt = <1800000>;
372 regulator-name = "vcc-1v8-typec";
373 status = "okay";
374};
375
376&reg_rtc_ldo {
377 regulator-name = "vcc-rtc";
378};
379
380&sound {
381 status = "okay";
382 simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
383 simple-audio-card,widgets = "Microphone", "Headset Microphone",
384 "Microphone", "Internal Microphone",
385 "Headphone", "Headphone Jack",
386 "Speaker", "Internal Earpiece",
387 "Speaker", "Internal Speaker";
388 simple-audio-card,routing =
389 "Headphone Jack", "HP",
390 "Internal Earpiece", "EARPIECE",
391 "Internal Speaker", "Speaker Amp OUTL",
392 "Internal Speaker", "Speaker Amp OUTR",
393 "Speaker Amp INL", "LINEOUT",
394 "Speaker Amp INR", "LINEOUT",
395 "Left DAC", "AIF1 Slot 0 Left",
396 "Right DAC", "AIF1 Slot 0 Right",
397 "AIF1 Slot 0 Left ADC", "Left ADC",
398 "AIF1 Slot 0 Right ADC", "Right ADC",
399 "Internal Microphone", "MBIAS",
400 "MIC1", "Internal Microphone",
401 "Headset Microphone", "HBIAS",
402 "MIC2", "Headset Microphone";
403};
404
405&uart0 {
406 pinctrl-names = "default";
407 pinctrl-0 = <&uart0_pb_pins>;
408 status = "okay";
409};
410
411/* Connected to the modem (hardware flow control can't be used) */
412&uart3 {
413 pinctrl-names = "default";
414 pinctrl-0 = <&uart3_pins>;
415 status = "okay";
416};
417
418&usb_otg {
419 dr_mode = "peripheral";
420 status = "okay";
421};
422
423&usb_power_supply {
424 status = "okay";
425};
426
427&usbphy {
428 status = "okay";
429};