| Oliver Graute | eb38171 | 2020-11-20 15:05:51 +0100 | [diff] [blame] | 1 | .. SPDX-License-Identifier: GPL-2.0+ |
| 2 | |
| 3 | U-Boot for the NXP i.MX8QM ROM 7720a1 board |
| 4 | =========================================== |
| 5 | |
| 6 | Quick Start |
| 7 | ----------- |
| 8 | |
| 9 | - Build the ARM Trusted firmware binary |
| 10 | - Get scfw_tcm.bin and ahab-container.img |
| 11 | - Get imx-mkimage |
| 12 | - Build U-Boot |
| 13 | - Build imx-mkimage |
| 14 | - Flash the binary into the SD card |
| 15 | - Boot |
| 16 | |
| 17 | Get and Build the ARM Trusted firmware |
| 18 | -------------------------------------- |
| 19 | |
| 20 | .. code-block:: bash |
| 21 | |
| Fabio Estevam | f0f4612 | 2023-01-12 21:52:23 -0300 | [diff] [blame] | 22 | $ git clone https://github.com/nxp-imx/imx-atf |
| Oliver Graute | eb38171 | 2020-11-20 15:05:51 +0100 | [diff] [blame] | 23 | $ cd imx-atf/ |
| 24 | $ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga |
| 25 | $ make PLAT=imx8qm bl31 |
| 26 | |
| 27 | Get scfw_tcm.bin and ahab-container.img |
| 28 | --------------------------------------- |
| 29 | |
| 30 | .. code-block:: bash |
| 31 | |
| 32 | $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin |
| 33 | $ chmod +x imx-sc-firmware-1.1.bin |
| 34 | $ ./imx-sc-firmware-1.1.bin |
| 35 | $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin |
| 36 | $ chmod +x firmware-imx-8.0.bin |
| 37 | $ ./firmware-imx-8.0.bin |
| 38 | |
| 39 | Or use this to avoid running random scripts from the internet, |
| 40 | but note that you must agree to the license the script displays: |
| 41 | |
| 42 | .. code-block:: bash |
| 43 | |
| 44 | $ dd if=imx-sc-firmware-1.1.bin of=imx-sc-firmware-1.1.tar.bz2 bs=37185 skip=1 |
| 45 | $ tar -xf imx-sc-firmware-1.1.tar.bz2 |
| 46 | $ cp imx-sc-firmware-1.1/mx8qm-val-scfw-tcm.bin $(builddir) |
| 47 | |
| 48 | $ dd if=firmware-imx-8.0.bin of=firmware-imx-8.0.tar.bz2 bs=37180 skip=1 |
| 49 | $ tar -xf firmware-imx-8.0.tar.bz2 |
| 50 | $ cp firmware-imx-8.0/firmware/seco/mx8qm-ahab-container.img $(builddir) |
| 51 | |
| 52 | Build U-Boot |
| 53 | ------------ |
| 54 | |
| 55 | .. code-block:: bash |
| 56 | |
| 57 | $ export ATF_LOAD_ADDR=0x80000000 |
| 58 | $ export BL33_LOAD_ADDR=0x80020000 |
| 59 | $ make imx8qm_rom7720_a1_4G_defconfig |
| Oliver Graute | 55be843 | 2022-11-04 16:03:37 +0100 | [diff] [blame] | 60 | $ make |
| Oliver Graute | eb38171 | 2020-11-20 15:05:51 +0100 | [diff] [blame] | 61 | |
| 62 | Flash the binary into the SD card |
| 63 | --------------------------------- |
| 64 | |
| 65 | Burn the flash.bin binary to SD card offset 32KB: |
| 66 | |
| 67 | .. code-block:: bash |
| 68 | |
| 69 | $ sudo dd if=flash.bin of=/dev/sd[x] bs=1k seek=32 conv=fsync |
| 70 | |
| 71 | Boot |
| 72 | ---- |
| 73 | |
| 74 | Set Boot switch SW2: 1100. |